Assembly and running -in a trimmer for Champion grass. If everything is in order with electrical equipment…

How to get a Champion T438 S-2 lawnie run up a trimmer for grass and work correctly How to Start a Trimmer

Review Echo SRM-2510 YouTube.COM/Watch?v = g1sxk9ybf6q you can buy here Trudogolik24.ru/index.PHP?mod = cattov_id = 440673PRICE = Perehod Review of the novelties of the Gearbox Champion T438S-2 how to get, how to work as a trimmer how to run up. If you are looking for a trimmer for grass, a lawn mower, a lawn mower, Champion, Champion, a review, mower, a trimmer for gasoline grass, a champion trimmer, a benzotrimmer, an editor of YouTube, repair, grass mowing, trimmers for grass, trimer, unpacking, gasoline gasoline Trimmer for grass, instructions, lawn mower, braids for grass, the Champion 523-2 lawn mower, Champion gas mower, steel juke, Champion 523-2, DIO, DIO lawn mower 523-2, Benzotrimer, 220volt, 220 volts, 220 volts, video show, presentation, presentation, presentation, presentation, presentation, presentation, presentation, presentation, presentation, presentation, presentation, presentation, presentation, presentation, presentation, presentation Reviews, assembly, champion motorcycle, 220 VOLT, 220-VOLT, EFKA, Champion Motokos, grass braid, grass, which trimmer for grass to buy, Carver, Lawn, Grasspok, Champion T233, Trimmer for grass for grass for grass for grass herbs, choice of motorcycles, with your own hands, running-in, online store, trimmer for the grass Champion T 517, two-stroke engine, rural life,String Trimmer (Product Category), there are no idle, ehho, super scarce ignition, no revolutions, stalls, ignition, cross, partner, #championt433-2, no traction, # automotive oil, antifreeze synthesis, trimmer for the Champion T517 grass, how to launch a trimmer for grass for cold, bought a trimmer for grass, a trimmer ethletric for grass, how to turn on a motorcycle instructions, a lawn mower champion t233, garden mechanisms reviews, T233, repair luna, repair lifelion with their owners, chainsaws, garden mechanisms, buy garden equipment, cord, trimmer for grass for summer cottages, online store of garden equipment, buy a garden, buy for a cottage, #steeply, aliexpress products, Champion T-344, Champion T-344.2, do yourself, garage repairs, Stihl, Champion T447-2, work of braids for the grass Champion T-344.2, mowing trimmer, Rylsky district, Kursk region, trimmer for grass for grass gasoline, trimmer for Champion grass, mowing grass trimmer, Husqvarna, makita, replacement of piston, Ural, friendship, taiga, adjustment of the carburetor, chainsaw, MTD, MTD, MTD Hitachi, Partner, Poulan, Oleo-Mac, how to correctly change the fishing line for a trimmer in a motorcycle, how to properly start a motorcycle, a bush, a coil, Champion T433S-2, a Chinese braid for grass, online than mowing grass, professional motorized carcasses, and a gas mall of Champion 523.2 overview, mowing high herbs with a motorcycle, refueling of fishing line in a motorcycle, how to prepare a gas mixture for motorcycles, harvesting hay with a motorcase Champion 523-2, the GAMPION 523-2 lawn mower, inexpensive trimmer for grass, garden, garden, trimmer for grass, price, price, price. Champion EM4218, Fishing Laws, Assembly of a Champion T523 grass trimmer, in the work of a trimmer for the grass Champion T433-2.mp4, trimmer for Champion T256 grass, trimmer for the Champion T 433-2 grass, overview of the Champion T433-2 grass trimmer, gasoline braid for grass, trimmer for Champion T256 Harse, trimmer for the grass Champion T256 price, 21VEK.by, 21vek, start a trimmer for the grass Champion T433-2.MP4, Champion T256, gasoline, Champion lawn mower, Champion T 523-2, Tools, Tools, TOP-10, Parks from China, AliExpress, Tool Repair, Oil for the Champion T433-2 Grass Chamber.MP4, novelty, China, TOP, 21 VEK, online hypermarket 21VEK.by, which trimmer for grass is better to buy, Patriot, an overview of a trimmer for grass, a cottage, which trimmer for grass is better, buy a trimmer for grass, garden equipment, Garage, garage 8, Garage 8, Rimmer, how to choose a trimmer for grass, how to get Trimmer for grass, T433, ANBOKING, Promotion, Unboxing, 21st century, online hypermarket 21st century, autopsy will show, Champion T433, 433, first launch, running a trimmer for grass, how to run up a trimmer for grass, tools, gas-tools, 50: 1 Disassembly, 40: 1, how to dilute gasoline, what kind of oil, equipment, a gas station, replacement of the cord, replacement of the cord in the trimmer head, garage, assembly of the trimmer for grass, Campion T523-2, Dyi, Lawn Models, Tremers, Tremers, Tremers, Tremers, Tromers, Tromers gasoline, electro, Champion ET450, motorcycle, a disk for braids for grass, Studio, carpentry, a spool for fishing line, installation of a trimmer head, installation of a saw on a trimmer for grass, Champion T528,Champion Trimmer T 433, Champion T 528, Champion T 438, Champion T333, Champion Grass Spit, Champion T 333, Champion T528S-2, Champion T523S-2, MOLE CHAMPION, CHAMPION MP Champion Full review, gas engineering, the GAMPION T523-2 Lawn Model, Hamber CHAMPION T523-2 hay harvesting, installation, Chinese lawn mower, Champion T523-2, CHAMPION GARS MODE LIKE, LETMENT, Champion LM4133-2. Bring a trimmer for the grass, how to get a champion, How to Start a Trimmer, Champion T438S-2, CHAMPION T433S-2, Champion GAMPION 523-2 GAMPION GAMPION, Champion 523-2, Champion 523- 2, Champion T256, Champion lawn mower, how to start a lawn mower, Echo SRM-22GES, ECHO SRM 22GES,How to start the Stihl FS 55, Champion T437, launch of a lawn mower, a trimmer for the Champion T433-2, Champion T333, Champion T438S-2 reviews, Champion T338S-2, something from this you will find in this video.

Hello!Thank you for the overview of the unit and for such detailed information! Separately, we express our gratitude that we drew attention to the lack of “running.in” trimmer for grass. We recommend using a cyclic mode of operation when mowing: 1 minute work at maximum engine speeds, then 5-10 seconds of work at idle speed.

Chinese Dushman. Like all other trimmers for grass. There are no quality. 10-15 years ago there was a quality. Then it was a real Champion.

If you make a loop fishing line for a trimmer, and fix the editor on the output shaft of its washers and a nut without a coil.It will be possible to mow so?

Instructions for Champion T 256

3 Technical characteristics T256/T256-2 T333/T333-2 T433-2 weight, kg (without cutting head, with empty tank) 6.2 7.3 8.3 tank for fuel, ml 750 950 950 Fuel model (proportion of the mixture ) Передаточное число трансмиссии Диаметр лески, мм Смесь бензина (октановое число не менее 92) и масла для двухтактных

4 Introduction Dear User! Thank you for the purchase of Champion products. This manual provides the rules for operating the Champion tool. Before starting work, carefully read the leadership. Operate the tool in accordance with the rules and accounting for safety requirements, as so

5 Protective stickers Read the operating instructions before starting work. Fuel warning. Danger. During work, put on protective glasses, ears (Berushi) or headphones, put on a protective helmet, if there is a danger of falling objects and bruises of the head presence

6 General safety rules The design of the Champion grass trimmer ensures safety and reliability in operation, subject to all the requirements of the manufacturer’s instructions. Read carefully and study this guide before proceeding with the operation of a trimmer for grass. Know what to do in

7 12.Do not use any other devices with this trimmer, except for those recommended by the manufacturer, because it can cause serious injuries, or damage the mechanism. 13.Before you work, inspect the area for the mowing and delete all extraneous items that may damage

8 Location of the main nodes and controls 1. Harbage knife 2. Rod (lower half) 3. Connective coupling 4. Gas trigger 5. The ignition switch 6. Stop lever trigger gas 7. Working handle 8. Suspended belt 9. Air filter housing 10. Fuel tank 11. Protective casing for

9 Assembly of a trimmer for grass weaken on a connecting coupling plastic nut 1 (rice.3a). Install the lower part of the bar in the connecting coupling. Place the hole in the rod opposite the locking bolt on the coupling (rice.3a). Squeeze a stop bolt (rice.3V) and holding it, push the lower half of the bar in

10 Installation of a grass knife installation of a knife for grass (rice.5) c a d b rice.5 Install a protective puck (a) rice to the gearbox.6. Install the grass knife (rice.5V). When installing, the landing hole in the knife should definitely coincide with the protrusion on the puck. Install the clip puck of the knife (rice.5c).

11 Installation of the trimmer head A install a protective puck and a knife mounting puck for the gearbox (rice.6a). Screw a trimmer head on the gearbox shaft. Combine the hole in the gearbox and the protective puck of the knife. Install a metal lock in the hole and tighten the trimmer head (rice.6C).

12 Recommendations for the preparation of the fuel mixture for the preparation of the fuel mixture use unhealthy gasoline with an octane number of 92 and motor oil for two.stroke aerial cooling engines in a ratio of 50: 1. It is recommended to use Champion motor oil for two.stroke

13 Fuel tank gas station 1. Before refueling the fuel tank, stop the engine and let it cool completely. 2. Fill the fuel tank in the open air or in a well.ventilated room, far from the sources of possible ignition. 3. Clean the surface next to the lid

14 Operating attention! Do not run up and do not leave the engine to work for a long time at idle speed. NOTE! The engine reaches the maximum power after the production of 8-10 full refueling of the fuel tank. Trimmer operating mode for grass attention! All work of the trimmer should be done in

15 4. Close the air damper. To do this, lift the damper lever up (rice.ten). 7. After the first cotton into the silencer, translate the lever of the air damper to the lower position. Then pull it strongly, but not sharply 1-2 times, the engine should start. eight. After starting, warm the engine in

16 Stopping the engine to stop the engine release the gas trigger, put the engine into idle mode and let the work of 15-20 seconds. Then transfer the switch to the “Stop” position. ATTENTION! The idle mode is necessary in order to reduce the temperature inside the engine.

17 Replacing the fishing line in a mowing head to replace the fishing line drown the trimmer engine for grass. A trash of fishing line, fold it in half and align the ends. Insert the ends of the fishing line into special grooves in the coil (a) rice.fourteen. Wrap a fishing line for a trimmer tightly with an interference in the reel groove. The winding direction is indicated by the arrow on the coil.

18 Recommendations for maintenance Complete device control lever knife for cutting fishing line Fuel filter Visual control x x x Cleaning x Contamination x x x x x x x x X sharpening x C control fuel tank cleaning shaft rod lubrication

19 main work on maintenance a carefully! All maintenance work is performed in protective gloves on a cold engine. AIR FILTER. Air filter pollution can interfere with the flow of air on the formation of the fuel mixture. To prevent

20 Fuel filter Work with a dirty or damaged fuel filter leads to clogging parts of the fuel system, loss of engine power. The getting of dirt into the carburetor leads to its failure. SPARK PLUG. For efficient operation of the engine, the spark plug should have

21 1.Disconnect the spark plug cap and remove the dirt around the spark plug. 2. Unscrew the spark plug with candle key. 3. Check the spark plug. If the electrodes are worn or damaged by isolation, replace the candle. four. Measure the gap between the electrodes of the spark plug with a special probe. Gap

22 Reducer service. After 20 hours of work, but at least once a season, it is necessary to check and add grease to the gearbox. For lubrication of the gearbox and shaft of the rod, it is recommended to use universal lubricant for the Champion EP-0 gearbox, or a similar lubrication of other manufacturers.

23 malfunctions and their elimination malfunction The reason for eliminating the malfunction Check the spark plug. Replace if necessary. The engine will not start. There is no fuel. Pour fuel into the tank. See the section “Launch flows the engine. engine “. The engine starts, but do not contact the service

Instructions for Champion T256, T333/T333-2

3 Technical characteristics T256/T256-2 T333/T333-2 weight, kg (without a cutting head, with empty tank) 6.2 7.3 tank for fuel, ml 750 950 mixture of gasoline (octane number of at least 92) and oil for oil for Champion two.stroke engines in a ratio of 50: 1 mixture of gasoline (octane number of at least 92) and oil for

9 Assembly of a trimmer for grass weaken on a connecting coupling plastic nut 1 (rice.3a). Install the lower part of the bar in the connecting coupling. Place the hole in the rod opposite the locking bolt on the coupling (rice.3a). Squeeze a stop bolt (rice.3V) and holding it, push the lower half of the bar in

Champion T334FS TRIMER. Assembly and Parameters

This model is highlighted by ease of operation, maintenance and independent repair. The tool is unpretentious to the quality of fuel and lubrication of the gearbox.

The basic equipment of motorcycles includes a reliable 4-stroke gasoline ICE with a working cylinder of 34 cm3 and forged CPG. An improved air supply system is responsible for cooling the motor, and a spring.loaded manual starter is responsible for launching. To facilitate the launch, the manufacturer equipped this model with a manual pump for pumping fuel.

The characteristics of this Champion model include:

The power of the standard motor is 1 liter. With.;
the capacity of the tank for refueling with fuel is 600 ml;
the maximum possible bevel width when using fishing line is 40 cm;
Speasing width when using a knife. 25 cm.

The Champion T334 trimmer is equipped with an ergonomic bicycle handle with convenient rubberized handles. The height of the position of the handle can be changed, which makes it possible to use a motorcycle person with any height.

Training

Before making the generator, it is necessary to engage in preparing it. Only the purchased device must be unpacked. Delete all packages. Be sure to check the case for mechanical damage that the device can receive during transportation. Transportation of new models of gasoline generators is carried out without the presence of oil in the system. And before turning on the unit, it is necessary to pour the required amount of lubricant in the corresponding compartment, otherwise the engine will not work.

Before each new launch, it is extremely important to check the oil level and, if necessary, add it. Dry environment for the engine may turn out to be “deadly”. If an extension cord is used to connect a gasoline generator, it must be completely unwound and clarify the section of the nominal load section. According to the standard, it should be 3-core, with a section of a cross-section of more than 2.5 square meters. mm.

Champion Straight Shaft 2-Stroke Gas String Trimmer (Overview 100682)

The preparation of the previously operated generator is carried out somewhat differently. It is necessary to check if the gas generator has grounding. If the break in the generator is more than a month, it is necessary to drain the remaining fuel fluid from the tank. If the device is in constant readiness mode, but rarely operates, fuel replacement is necessary on a regular basis. But this does not mean that unprocessed fuel should be changed to a new. In the case of its lack, it is enough to refuel refueling. Producing fuel fluids during engine operation is strictly prohibited.

Read how to configure a carburetor on a trimmer video

Particular attention must be paid to checking the oil in the generator system. Full update of lubricant must be done every 60-70 mothers. At the same time, it is important to remember if the oil composition of mineral origin was used, then it is strictly prohibited to dilute it with synthetic. The inconsistency of the compositions of the oils can lead to the failure of the engine. Before starting, it is also necessary to check if there is a connection to the generator of other electrical devices.

The trial launch is originally made using the starter. Then the motor is turned off, a re.factory is made. Thanks to this approach to the launch of the device, the engine warms up gradually, respectively, you can increase the load on the electro.generator. The main thing is to ensure that the total consumption power is not higher than the energy generated by the gas generator.

In principle, it is not so difficult to start a gasoline generator, the main thing is to adhere to the generally accepted rules of operation of this device.

Specifications

The maximum engine power is 6500

Overseas of the engine speed at maximum

Direction of rotation of the cutting part of the instrument-

Maximum rotation frequency of a knife (column./

Sound pressure level in dB in accordance

Technical characteristics can be changed without prior notice.

Graphic warnings, introduction

A trimmer for grass is a fast.cutting bench tool and in order to avoid an accident-

Dimo observe special precautions. Read this hand carefully-

water. Check out the rules for using the tool. Remember how to turn it off

tool and quickly lay the belt.

This symbol, accompanied by words, warning and danger-

But, should pay attention to the user to what one or another of him

the action or condition of the tool can cause serious

Read and remember the guidance.

Always use the means of protecting the organs of vision and hearing

Always turn off the engine and make sure that the cutting set-

Ra is stopped before proceeding with cleaning, replacement or mood-

WARNING! Never change the design of a trimmer for grass. Not-

The correct use of any trimmer for grass can cause a-

Ryznoe or fatal injury!

Technical characteristics, descriptions and illustrations given in this instructions,-

they are renewed at the time of publication, but they can be changed without preliminary-

Tel notification. Illustrations can depict additional equipment and AK-

sesuars that are not included in the standard equipment.

Dear user!Thank you for the purchase of Champion products. This manual provides rules

operating champion tool. Before starting work, carefully read the management-

bore. Operate the tool in accordance with the rules and taking into account the requirements of security-

but also guided by common sense. Save the instructions, if necessary

Champion technique is constantly expanding new models. Products

Champion has a ergonomic structure that ensures its convenience-

a well.thought.out design, high power and performance.

In connection with changes in the technical characteristics of the leadership, it may

do not fully match the acquired tool. The manufacturer leaves for-

battle the right to make changes to the design of individual nodes and parts that do not worsen-

the honor of the product, without prior notice. Keep this in mind when studying the leadership

Operating guide trimmer for grass gasoline t.

SPECIFICATIONS. 3VEVENTION. 4.use for its intended purpose. 4 general safety regulations. 5 fuel and oil. 7

Recommended fuel. 7 Preparation of the fuel mixture. 7

Commercence of a trimmer for grass. 8S.collar of trimmer for grass. 9 engineer. eleven

ENGINE STARTING. 11 Layout of a heated engine. 11 installation of the engine. eleven

Using and maintenance of a trimmer for grass. 12

Working with a mowing head. 13 work with a knife. 13

Replacing the cutting cord in a mowing head. 14.air filter. 16 fuel filter. 16 lights of ignition. 17

Gearbox. 18.technical service and storage. eighteen

Service recommendations. 18. 18 tables for maintenance. 19

Introduction, use as intended

Dear user!Thank you for the purchase of Champion products. In this manual, it-

den Rules for operating the Champion tool. Before starting work, read the leadership. Operate the tool in accordance with the rules and accounting of safety requirements, as well as guided by common sense. Save the instructions, if necessary, you can always contact it.

The Champion Garden Technology line is constantly expanding the new fashion-

Limi. Champion products are distinguished by an ergonomic design that provides convenience of its use, a well-thought-out design, high power and performance.

Due to changes in the technical characteristics of the hand-

water may not fully comply with the acquired tool. The manufacturer reserves the right to make changes to the design of the delicious nodes and parts that do not worsen the consumer properties of the product, without prior notice. Keep this in mind when reading the operating guide.

Peculiarities

It should be noted that a gasoline braid for grass is controlled very simply. It is enough to see how other users use this unit to start using it fully. The performance of the main technical functions is intuitive and does not require any difficulties in practice. Correctly driving a gasoline trimmer for grass is also not difficult. over, there is almost no difference between devices of household and professional categories.

The key difference is the type of motor. On technology for professionals, it is more powerful and gives more revolutions. A two.stroke engine is more often used in household models. Four.stroke units are more reliable and give out a greater effort, so they are suitable for special conditions, difficult and overgrown sites.

In addition, we must consider whether there is a cutting device in the supply set.

How to start work?

The literacy of the first launch largely depends on how a gasoline braid for grass will show itself with further operation. Errors can lower the device of the device. The fact is that after starting the moving mechanisms of the working apparatus will be rubbed to each other. Additionally, the skills of using the trimmer are formed. This is very important in cases where they work with this technique for the first time.

Start by examining the gearbox and the quality of the coating with its lubricant. Then the fuel mixture is prepared according to the instructions.

Important: such running.in will come in handy not only when mastering new equipment, but also when preparing a braid for grass for work after winter storage. If the gearbox is not at all or very little lubrication, the gear gear will be subject to very strong friction. Because of this, the gear begins to warm up and washed.

Having noticed a lubrication deficiency or its absence, you need to add a portion of “lithol”. The procedure is carried out very simply: a screw located on the bend of the gear housing is twisted. Through the released channel, 1-2 ml of lubricant is added by a technical syringe. With everyday work with a trimmer 1 time in 8-10 hours, you will have to lubricate the gearbox of the bar.

But the run.mowing is not exhausted only by laying the oil.

Two.stroke engines need a combustible mixture of two.stroke oil and gasoline. It is prepared in the proportion indicated in the guide to the tool or on the lubricant label. The preparation of fuel should be carried out a little so that only one mowing is enough. You need to place a fuel supply in the next container:

It is recommended to pick up oil with a medical syringe. This will more accurately observe the dosage. Sometimes another question arises. the manufacturer of the tool and the manufacturer of motor oils indicate different proportions of the combustible mixture, so it is difficult to decide which instructions to follow.

The output is simple: you need to run into a gasoline trimmer for grass with a minimum possible amount of oil. All the same, the lubricant does not burn out completely, and its excess forms a coke, clogging the piston and cylinder.

After the tests and pouring of the fuel mixture, such manipulations should be done:

EASIEST WAY TO STRING YOUR WEED EATER

put a trimmer for grass on a flat surface;
move the lever to the position “closed”;
pump fuel to the carburetor;
run the ignition system;
With smooth movements, pull the launching cord, waiting for resistance;
immediately after that make 3 or 4 strong jerks;
As soon as the motor starts to work, open the damper.

Inspection of the reducer of the lawn mower and its lubrication

Checking the gearbox before starting a gasoline trimmer for grass must be carried out on a regular basis. The lack of lubrication or its small amount increases the friction of the gear gear of a gearbox operating at fairly high speeds.

As a result, overheating and gears occurs. Motokosa gearbox fails. To prevent the occurrence of such a breakdown during operation and the regular inspection helps.

If, before the launch of a gasoline braid for grass, an insufficient amount of lubrication in the gearbox or its absence in the case is laid “litol”. To do this, it is necessary to unscrew the screw on the bend of the gear housing and the “lilest” in the amount of 1-2 ml.

Working with a gasoline trimmer for a long time, every 8-10 mothers add grease to the gearbox of the bar.

Preparation of the correct fuel mixture

Before starting to run the new engine of the lawn mower, you must also prepare the fuel mixture correctly. As you know for two.stroke engines, it is prepared from special two.stroke oil and gasoline, taken in certain ratios.

You can find out proportions from the instructions attached to the tool, or on the labeling label. From the instructions you will also learn the recommended type of fuel, as well as the recommended type of motor oil.

Cook fuel in small quantities sufficient for one mowing grass. Use special canists made of plastic for fuel, or a separate glass or metal dishes. It is best to type oil with a medical syringe.

Having gathered to run into a new lawn mower, many are faced with the problem in the preparation of the fuel mixture. And the reason for this is the disagreement in the instructions of the tool manufacturer and in the instructions of the manufacturer of motor oils.

The first recommend a 1:25 proportion. The latter recommend 1:50.

According to experts, if in the instructions for a motorcycle, manufacturers write a proportion of 1:25 or 1:30, then it is most likely a cheap tool with poor cooling, or the manufacturer does not know what kind of oil will be added to the consumer.

But here it must be understood that the excess of lubricant does not affect the performance of a trimmer for grass in the best way. Excess oil does not completely burn out when operating the engine. It cokes, clogs a cylinder and piston.

What to do in this situation when running in a new tool? An ideal option would be to purchase exactly the oil that the manufacturer of the lawn mower recommends.

In the case of run.in engines, when it is not possible to purchase the recommended oil, it is best to purchase a good Husqvarna two.stroke oil for the same gas tool. It costs not cheap, but there is enough it for a long time. It is necessary to interfere with it as it is written in the instructions on the bank.

Remember, it is best to use the proportion that the oil manufacturer gives. But is that proportion that is written on a spit is better to find out by experiment. If, with a trimmer recommended by the manufacturer for grass, the proportion of the engine sniffs with oil and the subteids are visible on it, then the proportion must be increased.

The main causes of breakdowns and ways to eliminate them

If the engine of a gasoline mower is not started, then the following reasons are possible:

non.compliance with the sequence of launch specified in the instructions;
Lack of fuel;
Incorrect proportions of the fuel mixture. in this case, the mixture must be drained and mixed with gas and oil according to the instructions (the usual proportion is 25: 1);
Problems with the light of the ignition. then it needs to be cleaned of soot or replaced with a new.

If the engine starts, but the working node does not rotate, then you need to check the setting of the carburetor, gearbox and the sleeve of the cutting head. Also, in such cases, it is worth cleaning the air and fuel filters and change the fishing line for the trimmer.

Reviews

Most owners of both gasoline and electric trimmers “Champion” in their reviews note the high quality of their assembly, a large resource of operation and the convenience of their use. Another important advantage of this technique over similar in quality models, many authors of reviews call its lower price.

As the main drawback, many authors of the reviews note that the control button located on the coil of the fishing line is at first too tight, and until it has a fishing line for a trimmer often have to be pulled out of the reel manually. In very rare cases, the authors of the reviews on gasoline trimmers for the grass came across a gas tank or gas pipeline.

Sources:

https://sprvk.ru/kak-zavesti-benzokosu-Champion-t438-s-2-obkatat-trimmer-i-rabotat-pravilno-how-to-start-a-trimmer-xl-xf0gRefI92158DYmn4t-vi.html
https://service-instruction.ru/manual/155118/Champion-t-256
https://service-instruction.ru/manual/349560/Champion-t256-t333-t333-2
https://gskelit.ru/svarka/sborka-Champion-t433s-2.html
https://manualza.ru/Champion/t233/dhkl1
https://manualza.ru/Champion/t516/cbng1
https://stroy-podskazka.ru/trimmery/obkatki-benzokosy/
https://gardenzoom.ru/pervyj-zapusk-i-obkatka-benzokosy-sekrety-i-tonkosti/
https://stroy-podskazka.ru/trimmery/Champion/

Grass Trimmer assembly, champion, running, trimmer