DIY grass trimmer for grass. What you need to have at hand

How to replace a fishing line for a trimmer for grass for grass with a chain from a chainsaw: We increase the effectiveness of the tool

Many owners of gasoline trimmers probably noticed that when using an instrument near stumps or trunks where young shoots of plants are found, a trimmer for grass does not carefully eliminate this shoot, more often in cases where there are many of it. To get rid of it, someone tries to use knives, but they are not adapted to thin plants. As one of the alternative options, you can consider the replacement of a trimmer fishing line for grass with a chain from a chainsaw. However, some subtleties of safety for the tool and a person working with it should be taken into account. You can learn about all the advantages and disadvantages of such a replacement from the sections below.

How effective is the replacement

The work on welding and fastening itself takes 20 minutes and does not differ in increased complexity. Even a person without experience, but with the availability of the necessary materials and tools using the instructions below, will be able to independently cope with this work.

The use of a trimmer for grass with a chain from a chainsaw can increase the effectiveness of the tool in cases with young shoots, as described above, and can also reduce the money costs for servicing a trimmer for grass.

The key point in the replacement of the fishing line is security. This issue should be approached with particular caution.

The gasoline trimmer has a clutch clutch that allows the engine to accelerate smoothly. But in electrical types, a high load quickly occurs due to the torque of the electric motor. This is fraught with the fact that the flexible shaft of the braid for grass can twist or break the engine. In the worst case, for example, if you put a chain on a weak trimmer for grass, then in the process of working with the tool, it can break and cut a person.

DIY grass trimmer for grass

I want to share with you useful information for those who use a trimmer, which is also called a lawn mower, benzo. and a motorcycle, and the inhabitants of the sleeping areas of high.rise buildings dubbed him “good morning, country”. But, be that as it may, most wonder if there are options such as an eternal fishing line for a trimmer for a trimmer for grass with your own hands. In order not to torment users with the expectation of users, I will say right away: “Yes, it exists, and it will survive even the tool itself”.

At first, it would not hurt to understand what the factory fishing line for a trimmer wears out, which is constantly changing, which is not very convenient, and sometimes such a need can even spoil the mood, since there is simply nothing to replace. I noticed that the lawnmandsmen, in order to finish the work, are forced to use some wire instead of the fishing line, and on the Internet I even saw that for this they tried to use pieces of a soft hacksaw canvas, broken in half-there are openings for fastening from two sides. But all these attempts are ineffective, since the secant element always breaks, or breaks from strokes on the hard trunks of weeds, or on extraneous objects that are in the grass.

Instead of a fishing line, it is much better to use a thin steel cable. its threads are made of instrumental steel, which is not subject to corrosion, but has an extremely high strength barrier. That is, in fact, pieces of a steel cable installed on a rotating disk Motokos should serve forever, in any case, much longer than the trimmer itself for the grass. But this is not entirely true, or rather, in order to provide the cable with an endless operational resource, its free end must be sealed, which is completely difficult or even impossible to do at home. The fact is that from frequent strikes the tip of such a second element will begin to flush and gradually turn into a bunch of steel threads that will be confused. There is only one conclusion: if there is an opportunity to seize the tip, like a plumbing cable. do it and use it in the health resort.

I don’t buy a fishing line for a trimmer for a trimmer for grass, I make myself a bottle myself

A fishing line for a trimmer for a trimmer for grass can be made from a regular PET bottle at home. Having slicing skills PET tape, it will not be at all difficult. In terms of resistance, a homemade fishing line for a trimmer is inferior to the purchase, but it is free. Sometimes it is easier to do than go to the store if he is far away. If necessary, mow only lawn grass, the resistance of a home.made fishing line will be more than enough, and the need for the purchased will completely disappear.

What is required:

For the manufacture of fishing line you need to use bottles with thick walls. From them it turns out to be quite stiff and resistant. If you use thin bottles, then the fishing line for the trimmer begins to decay from blows to thick stems. You can use 5 liters, beer kegs are especially suitable.

From the beer sunches, a tape is cut with a width of 8-9 mm, since their walls are thicker and with a width of 15 mm fishing line for a trimmer will turn out excessively thick. The recommended tape width will ultimately allow the fishing line for a trimmer with a cross section of 2.5-3.5 mm.The edge of the chopped tape should be warmed up with a building hairdryer and twist.

Then the twisted end is carefully cut and clamped in the cartridge of an electric screwdriver. Next, you need to slowly warm the rest of the tape and twist it with an electric screwdriver. It is important to keep the tape on the label so that the fishing line for the trimmer turns out to be flat, and not twisting the rings.

At the same time, electric screwdriver must be launched with short presses, since it must be rotated very slowly. It is important not to let go of the twisted tape until it freezes, so that it does not unwind. Когда нужно перехватить леску для триммера ближе, делается пауза и после остывания пластика рука сдвигается. With such a sequence of actions, obtaining marriage is excluded.

If you twist the tape from an ordinary bottle, you will get a fishing line for a trimmer with a length of slightly more than 2 m. When using a beer keg, you can get more than 30 m.

Homemade fishing line for a trimmer, especially from the keg, perfectly mows even high burdocks, although it breaks up at the edges. When caring for the lawn, its resource is many times greater. Thus, in the manufacture of fishing line from PET bottles, there is definitely meaning.

If a specialized store where garden equipment is sold far, then it is easier to make a fishing line for a trimmer with your own hands and dig a site without wasting time on a trip.

Progress:

First you need to make the base of the nozzle. To do this, cut a square with a side of 100 mm from a metal plate with a corner grinder. You need to mark it in such a way that there is a hole exactly in the center (at the intersection of the diagonals). To do this, from the center of the selected opening perpendicular to the short side of the plate, we measure a distance of 50 mm and plan the trimming lines.

We mark the base of the nozzle

Cut the excess and get a square of 100 mm x 100 mm. Now it is necessary to twist the corners a little and drill the central hole for the shaft of a trimmer for the grass.

Twist the corners and drill the central hole for the shaft of a trimmer for grass

Cut the canvases for metal, measuring from each end 8 cm. We get 4 blanks with finished holes.

Cut the canvases for metal

This workpieces must be given the shape of the knives. To do this, we plan a fishing line for the trimmer of the cut on the eye (special accuracy is not required), fasten all 4 blanks together and grind the excess.

We cut knives from the blanks

As a result, we get the knives of the same weight and size, they can be sharpened a little on one side. Now all parts of a home.made nozzle for a trimmer for grass are prepared, you can start assembly.

Everything is ready for assembly

We put a small puck on the screw and insert it into the corner hole. We put a knife on top, placing the sharpened side along the rotation of the shaft of the trimmer for the grass. Following is a large puck and nut, which does not drag out, so that the knife rotates freely. We fasten the other 3 knives in the same way.

We fix the knives

The end of the screw must be blown up so that the nut does not fly.

The end of the screw must be blown

The nozzle is ready. It is installed by nuts to the ground and fixed in the same way as a three.lobed knife that comes with a trimmer. In a collision with a stone, the knives fold and go a little inside.

This idea was proposed by our constant author of the video Tatyana (Tula region). You can see in more detail the entire process of making such a nozzle for a trimmer for grass and find out some nuances by watching a video that she prepared.

When working with a trimmer, it is important not to forget about safety precautions using any nozzles, and especially homemade.

We offer to discuss this idea in the Комментарии и мнения владельцев on the publication. Share with us your thoughts, and also tell about your successful decisions.

A special nozzle for drilling branches was included in our motorcycle. She cuts thick stalks of grass well, and sedge too.

Has always been against all kinds of electro-benzo tools with homemade cutting devices. Probably because I have only 2 legs, 2 hands, 20 fingers and 1 head. Now, if you master the regeneration of organs, maybe then The fact that she told and apparently made all this the lady as a result lost the protective shield that covers the cutting part. The electroitriller, however, turned out.

The device does not lose a protective shield, it is mentioned about safety precautions, and if you reason like that, then an ordinary kitchen knife is much more dangerous, with inept treatment, of course, we tried various factory metal knives, similar to the saw from the circular. this is where the electroitriller is where the electroitriller. And as a lady, I’ll tell you that this nozzle is for more than one year and is very pleased with the result, but the heavy factory disk does not really take anything, only bald on the grass, and even how hands after it are dumped-there is nothing to say. You took a hacksaw in your hands at least? how much does this piece weigh? And what harm can be from him with such a weight? Offer at least something for mowing sedge and weeds, and we can all criticize criticism

Well, we will take a video for you later, look at us on the channel Tatyanina House and Garden (YouTube), and be sure to show us in work, but it will be in the spring subscribing to www.YouTube.COM/Watch?V = O-WMHHLF4LG

Well, we will take a video for you later, look at us on the channel Tatyanina House and Garden (YouTube). And be sure to show in work, but it will be in the spring www.YouTube.COM/Watch?V = O-WMHHLF4LG

I’m afraid a piece of the canvas will bounce down the throat. So everything is cool, I did it, only the canvases were from a cardboard knife.

And you can also put (attach) a piece of the old chain from the motorcycle. Speasing everything! One problem is how not to break the bearing of a trimmer for grass. The protective cover is preserved, of course.

For whom, interestingly, the author made this suicide model? And where is the protective casing? If the hole is pulled in the plate, or the bolt cuts down with constant rotation of the cutting of a hacksaw cloth. the flight path may be lethal.(((Saving in your life is a bad idea. My minus is the device.

The protective casing, of course, is set, it is said about observing safety precautions, and if a piece of the canvas flies away, then its weight is negligible compared to factory iron knives, which are similar to the circular saw! There have already been cases when these saws scattered into pieces in a collision with a stone. this is already dangerous!

A strange reaction to such a good.natured resource. From the point of view of trauma, as from under a trimmer for grass, so unpredictable objects with different speeds can fly out from under the gas mowing, and also quite traumatic hazardous. And in these cases, from the point of view of security, they recommend that, along with the protective casing, are the corresponding shoes. From the point of view of security, the author and this item thought out, flashing the end of the screw. And the theory of cutting the screw or the wiper of the hole in the plate is not entirely literate in this design. I think that rather a trimmer for grass will fall apart faster than these nodes will fail in such a way, as some respected colleagues suggest. I think the author tried for himself and thought about his safety. By the way, I saw a similar design on an industrial trimmer attached to the “Belarusian” tractor. And this unit was quite successfully mowed by the sanatorium territory.

Necessary materials and tools

The indestructible nozzle for a trimmer for grass can be purchased at Aliexpress. But you can not overpay and make the same, and maybe better detail, with your own hands. This homemade coil for a lawn mower is suitable not only for fishing line, but also for a cable. This is very convenient and profitable, since the fishing line for the trimmer is heavily coping with thick plant stems and is consumed faster.

The presentation is based on the mechanism with the tape of the Bobin tape recorder. Many at home have old tape recorders, so problems with the search for spare parts should not arise. It will also require a protective casing from a car rack, which will act as a cover, a metal washer and a hexagonal nut with left thread.

For work, such tools and materials will be required:

Additionally, you will need a ruler, nippers, a key and some other auxiliary tools.

How to do it with your own hands

After all the materials and tools were prepared, you can proceed directly to the process of creating an unbearable coil:

• In the middle of the tape record, drill a hole at 11.5.
• Eliminate excess castings that interfere with the normal connection of parts. You can do this with a chisel or drill. The metal elements will be removed faster, but this should be done carefully so as not to get hurt.

That’s all, it remains only to experience the received homemade on the grass. This design is very effective and reliable. It is much stronger and more durable than a factory plastic coil. Therefore, if you often use the lawn mower and want it to serve as long as possible, allocate only 15-20 minutes of time, find the necessary elements and make such an indestructible coil.

As it turned out, the finalization is inherently very simple, and if you had everything necessary, took 10-15 minutes, no more. You just need to have an idea of ​​how to get to a drill and welding machine.

The use of the chain from the chainsaw not only significantly increased the effectiveness of the tool, but also reduced the costs of its maintenance. in any case, I will no longer need a fishing line for a trimmer for a trimmer for grass.

Safety is above all!

Do not forget about safety measures when working with a trimmer! The fragments of the bushes fly over a long distance and with great force. Use personal protective equipment. special mask, make sure there are no people and animals around.

Installation of a metal cable: pros and cons of

The most common undertaking on the topic “How to replace a fishing line for a trimmer trimmer for grass?”, This is the use of a steel cable. In fact, in terms of efficiency, a metal cable is much better than a standard option. It is almost not susceptible to wear, and the grass is certainly no worse. Nevertheless, you need to understand that manufacturers do not just use a polymer fishing line for a trimmer, and not an iron cable.

Unfortunately, the reverse side of wear resistance consists in the increased wear of the transmission of the lawn mower. Due to the fact that the fishing line for a trimmer breaks, it does not overload the mechanical part of the device, but simply wear out as you use.

If desired, you can use a steel cable, but it is important that in the process it does not concern the protective casing in any way. The tips of the cable must be brewed so that they do not be blown up.

Installation of plastic screeds: pros and cons of

If during operation the fishing line for the trimmer suddenly ends, and there is still a lot of work, then it is not necessary to look for a new one. Its function will temporarily be able to perform plastic clamps. They are quite strict and are able to cope with almost any grass.

The disadvantage is the rapid wear. The effectiveness of plastic clamps, in such non.standard use, is also low. Nevertheless, such an alternative option can always be used.

Is it possible to use a cable instead of a fishing line on a trimmer

Of course, you can. However, at the same time, it is worth understanding all the insecurity of this venture, and the ultra.suffering exit of the transmission of the benzotimmer out of order. Indeed, a steel cable is a hundred times stronger than a fishing line, even a special, trimmer. It will not be so often torn from grass, branches and stones, so it will last much longer.

At the same time, you need to understand that the fishing line for a trimmer is torn when the trimmer for the grass is not just like that, but from a strong load. As a result, the engine does not stall, while dynamic blows to the transmission of the lawn mower are extinguished. In the case of a steel cable, the entire load will fall precisely for the transmission, as a result of which it will quickly fail.

If you really want to try to use a cable on a gas station, then at least it needs to be correctly installed. Firstly, you can not wrap a long cable to the coil. Make its length so that it does not hurt the protective casing of a trimmer for grass when rotating the coil.

Be sure to clamp the cable with washers in the middle part and put one drop of welding at its ends, so that it does not bloom. As a result, the cable should not have any issue, and welding at the ends will protect it from blooming. However, even in this way, using a cable on a benzoca or a trimmer is very unsafe. Much easier to use ready.made factory nozzles.

Factory nozzles for a trimmer for grass and motorcycle

Today on sale you can find ready.made nozzles for motorcycles and a trimmer for grass, which make it possible to increase the efficiency of this tool several times. Nozzles can be made in the form of knives, with a chain or a steel cable.

Of course, the use of the finished nozzle on the trimmer allows you to protect yourself and others when working with this tool, and also not to be afraid for its premature failure. It is easy to find such nozzles in online stores, although you can try to find them in ordinary.