Easy Start Trimmer
Gas cutter STIHL FS 55 C-E Comfort trimmer (41402000540) An updated version of the FS 55 trimmer, equipped with an easy start, no jerks! A reliable high-performance trimmer that has proven itself at the highest level over the years.
Advantages of the STIHL FS 55 C-E trimmer:
Easy and easy-to-use starting thanks to the additional spring between the crankshaft and the starter. Stable tractive effort. Everything you need to start reliably. Standard on all C-E models.
The STIHL 2-MIX engine is powerful and economical at the same time. The separation of exhaust gas and fresh air minimizes operating losses and thus increases productivity and at the same time reduces fuel consumption.
Multifunctional handle. All engine controls are in one hand. It is a simple and reliable design.
Two-handed grip. It provides a natural movement of the FS petrol brush when mowing and can be easily adjusted and fixed with 4 bolts. For efficient mowing work, the two-handed handle is always the first choice when you often have to mow large areas.
The presence of a gearbox, you can put a cutting set in the form of knives and discs.
By pressing down on the bulb, this small fuel pump feeds fuel to the carburetor, reducing the number of cranking strokes required after extended periods of non-use.
The vertical translucent fuel tank allows the operator to easily check the fuel level before starting work. The upright position makes refills easy.
Heavy-duty steel clutch. The centrifugal clutch is designed to reduce slippage between the flexible shaft and the drive.
Suitable mowing heads:
- TrimCut 31-2 (4002 710 2152) line diameter: 2.4 / 2.7 / 3.0 mm
- AutoCut 25-2 (4002 710 2108) line diameter: 2.4 / 2.7 mm
- AutoCut C 26-2 (4002 710 2169) line diameter: 2.4 / 2.7 mm
- SuperCut 20-2 (4002 710 2162) line diameter: 2.4mm
- PolyCut 20-3 (4002-710-21-30) plastic knives included
- PolyCut 27-3 (4002 710 21 76) plastic knives included
- DuroCut 20-2 (4002 710 21 67) 2.0 / 2.4 / 3.0 / L / XL
Petrol cutter STIHL FS 55 C-E Comfort trimmer (41402000540) The FS 55 C-E package includes:
- Two-shoulder strap.
- Two-bladed knife.
- Mowing head with line AutoCut 25-2.
- Comfortable safety glasses.
- Protective cover for working with the mowing head.
- User’s manual.
|Working volume cm³:||27.2|
|Standard cutting tool:||Grass cutting blade, 2 blades|
|Sound pressure level with plastic instrument dB (A):||95|
|Sound power level with plastic instrument dB (A):||108|
|Sound power level with metal instrument dB (A):||94|
|Vibration level left, with plastic tool m / s²:||5.5|
|Vibration level left with metal tool m / s²:||5.6|
|Vibration level right, with plastic tool m / s²:||5.5|
|Vibration level left with metal tool m / s²:||6.8|
|Total length m:||170|
|Tank volume l:||0.33|
|Weight, kg :||4.4|
|NOTE:||The range of products and data given may differ depending on the export version. Constructive and technological modifications of the tool and equipment, as well as price changes are possible.|
- At any time you can contact us by multichannel phone: 7 (495) 641-75-73; 7 (965) 204-35-39.
- Self-pickup is carried out at the address: Moscow, st. Yeniseiskaya, 11.
- Pickup point working hours: Monday. Friday from 10:00 to 19:00, Saturday. Sunday by appointment.
Benzotrimmer. Build and run
You don’t know how to prepare the brushcutter for the first start, how to prepare the correct fuel mixture and how to quickly change the cutting elements? In this article, we will cover these topics, as well as give basic rules for maintaining the petrol trimmer and some tips on how to properly store the brushcutter so that it works like new in spring.
The mower is a lightweight, mobile, versatile lawn care and weed control unit. It can be gasoline or electric, i.E. Run on fuel or mains (or battery).
We will talk about the petrol trimmer using the Fubag as an example. It is subject to all the rules of the first start-up, service and maintenance of gasoline equipment.
– Care and maintenance
It is very easy to maintain and care for this model!
In order for the trimmer to work properly without loss of power, you need to regularly, every 10 working hours, remove dirt from the air filter. This model has easy access to the filter. The filter itself is made of nylon and is reusable. It just needs to be rinsed in gasoline and it will be like new and ready to go again!
– Spark plug
The spark plug should be checked periodically. The candle can be easily twisted. It is necessary to examine it. If there is dirt or carbon deposits, clean the electrodes with a brush. The gap between the electrodes should be between 0.6 and 0.7 mm.
Do not forget to periodically clean the spark arrestor of the engine muffler. A dirty spark arrester will reduce engine power and mow quality.
– Fuel filter
You need to check its condition periodically. To do this, unscrew and take out the fuel tank cap. Using a wire hook, we take out the fuel filter from the tank. Disconnect from the gas line, rinse in gasoline and put in place.
Every three months, before starting work, we check the presence of grease in the gearbox. Replace the grease if necessary.
– Cooling system
During operation, the cooling holes and fins of the engine cylinder become dirty. They are best cleaned with a brush or blown out with compressed air (this requires a small compressor and a blow gun).
Let’s look at the example of the popular petrol trimmer Fubag FPT43. It is an easy to operate and very reliable unit with the most popular 1.3 kW motor.
The scythe is supplied unassembled and consists of: motor block, rod, T-shaped handles and protective casing. Includes instruction manual.
This model allows you to work both with a fishing line on the grass, and with a cutting disc for dry stems and branches, both are already included in the kit.
In addition to the main parts, which is very nice, Fubag completes the scythe with a set of tools, a container for gasoline, a belt and reliable goggles.
– Consumable parts
The most expensive part is trimmer line. Any line is suitable for this trimmer, of course. Fubag also produces its own trimmer line, which, in turn, is compatible with petrol cutters all manufacturers.
Fig. 9. Line for the Fubag trimmer
Often, manufacturers complete with a cheaper option in order to seem favorable in price, but you will have to replace this spool almost immediately.
A good spool is of plastic quality, it opens easily and makes it easy to thread the line.
A good spool features quality materials, a strong reinforced line ejection button that takes impacts at high spin speeds, opens easily and allows you to easily thread the line. It is also very important that the spool is well balanced as the rotation speed is very high. Fubag trimmer spools meet all these requirements.
Fig. 10. Spool Fubag
As for knives, they also have dull properties. There are spare parts in the Fubag range three. And four-cavity options. The main thing is not to grind a lot from either side, so as not to create an imbalance.
Fig. 11. Trimmer four-blade disc Fubag
– Build the braid
So, first you need to properly assemble the brushcutter. It’s very simple.
1) We connect the rod and the engine. To do this, align the rod with respect to the engine so that the spindle is in the same plane with the engine fuel tank.
2) Install the boom flange into the motor and secure with 4 screws.
To do this, unscrew the thumb screw on the top cover of the fastener. And remove the top cover. Next, insert the handle into the fasteners, install the cover, tighten the screw. We put the control handle on the pipe and fix it with a screw. On this trimmer, the adjusting screw allows you to adjust the handle for the user: you just need to loosen the thumb and move it to the required distance, and then fix it.
5) Now we connect the electrics.
We connect the throttle cable to the engine and insert its end into the throttle joint. We connect the red wire of the control handle to the red wire of the engine, and the black wire to the black one.
9) While holding the rod, twist the spool of line counterclockwise until it stops.
It remains to install the two-shoulder strap. Attach the shoulder strap carabiner to the shoulder strap attachment ring. We adjust the position of the ring on the rod of the product and fix it with a fixing screw. Adjust the length of the shoulder strap.
– First start
Further, the procedure for preparing for the first start, as with any engine:
1) Unscrew the candle, pour 3-5 gr into the candle hole. Oils for two-stroke engines.
2) Smoothly pull the starter handle 5.10 times, this is necessary to lubricate the piston and cylinder, excess oil will be removed by itself).
Fig. 6. Sipping starter
We twist the candle.
3) Move the choke lever up to the Closed position.
Fubag benzotrimers have a system Primer preliminary pumping of fuel into the carburetor. A few taps on the primer membrane fill the carburetor with fuel mixture and allow the engine to start quickly. We smoothly pull the starter several times, then more actively, but without excessive efforts and sharp blows.
Comfortable start of two-stroke Fubag engines is ensured by a manual starter EASY START. Fubag petrol trimmer starters are equipped with a mechanism that, with a smooth uniform movement of the starter handle, first accumulates energy, and then instantly releases it, rotating the shaft and starting the engine.
Therefore, to start the Fubag trimmer, you do not need to apply much force and pull the starter handle sharply, overcoming engine compression.
As with any engine, the Fubag engine must also be run-in so that the parts fit perfectly together. Therefore, do not bring it to maximum speed when the first 4-5 fuel tanks are used up and do not overheat the engine.
Pay attention to the controls of the unit. On our model, they are placed on the handle and are always at the operator’s hand:
Fig. 7. Brushcutter controls
Pay attention to the controls of the unit. On our model, they are placed on the handle and are always at the operator’s hand:
A switch that has three positions: STOP-0, 1 and START (these are the positions of the switch from bottom to top). To start the trimmer, it is necessary to move the switch to the middle position 1 (this is L), and to turn off the engine after the end of the work with the tool, to the STOP-0 position (this is OFF).
The uppermost position of the START switch can be used to cold start the trimmer, the engine will start at a slightly higher RPM for easier starting. To switch to this position, you must first hold down the throttle lock button and the accelerator, and with your thumb, lift the switch to the START position for an easy start at increased revs. Once locked, you can release the buttons and start the engine.
Fig. 8. Switch to START position
The accelerator, which was mentioned earlier, is the throttle control lever, but to add throttle, you must first press the accelerator lock button. This key is responsible for the safety of use to prevent accidental pressing of the accelerator and acceleration of the blade or spool.
Brush cutter Texas CG260B
Description Motocross Texas CG260B
Motokosa Texas CG260B lightweight and handy petrol trimmer for household use in the home garden. Cuts lawn grass and tougher vegetation with high quality, incl. Weeds and shrubs. Straight non-separable metal rod accepts fishing line or knife. The garden tool comes complete with a three-blade knife, a trimmer head with semi-automatic cord lengthening and an adjustable harness. For ease of operation, the model is equipped with a bicycle handle, for safe mowing with a safety guard.
- Engine displacement: 25 cm3
- Power: 0.76 kW / 1 hp
- Line diameter: 2.4mm
- Cutting width: 440 mm
- Line feed: Semi-automatic
- Disc: 255 x 25.4 mm 3 teeth
- Rod type: Straight with gear
- Detachable rod: No
- Weight: 6.2 kg
- Package contents: trimmer head with line, 3-tooth grass knife, knapsack mount
- Manufacturer: Texas (Denmark)
Motokosa Texas CG260B light petrol trimmer with 1 HP engine The tool is aimed at non-professional use. Optimal for the care of small lawns, gardens, backyards. This brushcutter model is lightweight and easy to start. The trimmer is equipped with an eco-friendly, compact 26cc engine. Engine power 0.76 kW or 1.0 HP A fuel priming pump is used to facilitate the starting process. The unit’s fuel tank holds 0.7 liters. Fuel. With an average consumption, this volume is enough for one and a half to two hours of continuous mowing. The transparent walls of the tank allow to control the fuel consumption and the remainder of the gasoline mixture.
In a brushcutter Texas CG260B a straight metal bar is used. The bar is reliable, allows you to equip the tool with cutting knives. This model comes with a three-blade cutting knife. Knife width 25 cm. Also included in the kit is a trimmer head. The head is semi-automatic, accepts nylon line no thicker than 2.4 mm. When the trimmer head is selected as the working attachment, the working width increases to 44 cm. In both cases, the user is protected by a safety guard. It prevents sand, garden debris and grass clippings from being thrown out during mowing.
Motokosa Texas CG260B created not only for effective, but also for comfortable lawn care. A comfortable working environment is created by such details as the harness and the ergonomic handle. The convenient, adjustable knapsack strap relieves some of the load that comes from the significant weight of the tool (6.2 kg). The two-handed bicycle handle of the brushcutter provides a comfortable ride. For convenience, it can be adjusted in height. The handle is collapsible and can be removed during transportation of the trimmer.
Trimmer petrol Husqvarna 128R
Lightweight portable trimmer Husqvarna 128R useful in household and garden maintenance. The light weight (5 kg including the cutting attachment) and the easiest starting is designed for ordinary users with no previous experience with mowers.
The 0.75 kW two-stroke petrol engine is sufficient for mowing lawns, grass and small bushes. Trimmer working width 45 cm.
Starts up quickly (Husqvarna’s patented Smart Start®), refueling and auto return switch. The adjustable handle and comfortable straps on both shoulders allow you to adjust the device to your body shape, thereby reducing the strain on your arms and shoulder girdle.
The 128R model is extremely compact (due to the small size of the fuel tank), easy to carry and transport, and has a modest consumption of the combustible mixture. The trimmer is equipped with a grass knife and line, a protective cover.
Please note: the trimmer does not run on pure fuel, but on a mixture. We recommend using only genuine Husqvarna oil in a 1:50 ratio.
Ergonomic grip Comfortable grip design. Tap n Go Trimmer Head The Tap n Go trimmer head provides easy, fast line feed.
The lightweight Husqvarna 128R Portable Trimmer comes in handy for household and garden use. The light weight (5 kg including the cutting attachment) and the easiest starting is designed for ordinary users with no previous experience with mowers. The 0.75 kW two-stroke petrol engine is sufficient for mowing lawns, grass and small bushes. Trimmer working width 45 cm. Quick start (patented Husqvarna Smart Start® system), fuel pump function and auto return switch. The adjustable handle and comfortable straps on both shoulders allow you to adjust the device to your body shape, thereby reducing the strain on your arms and shoulder girdle. The 128R model is extremely compact (due to the small size of the fuel tank), easy to carry and transport, and has a modest consumption of the combustible mixture. The trimmer is equipped with a grass knife and line, a protective cover. Please note: the trimmer does not work on clean