How to assemble a Parma Practiki lawn mower. The device and principle of operation of the starter on the trimmer

Playing the motor motorcycles. Features of the game of the lawn mower

It should be noted that a gasoline braid for grass is controlled very simply. It is enough to see how other users use this unit to start using it fully. The performance of the main technical functions is intuitive and does not require any difficulties in practice. Correctly driving a gasoline trimmer for grass is also not difficult. over, there is almost no difference between devices of household and professional categories.

The key difference is the type of motor. On technology for professionals, it is more powerful and gives more revolutions. A two.stroke engine is more often used in household models. Four.stroke units are more reliable and give out a greater effort, so they are suitable for special conditions, difficult and overgrown sites.

In addition, we must consider whether there is a cutting device in the supply set.

Presentation preparations

So, let’s start with preparation for work. How to bring the law mower to a state of full readiness for use?

First of all, collect it if it is disassembled. Strong the detachable bar in the latches. Carefully check the fixation of cutting equipment, especially if it is a knife or a saw disk. Gasoline trimmers for grass are usually extremely powerful, and the speed of rotation of cutting equipment in them is simply fantastic. Therefore, a poorly fixed blade, firstly, can injure the employee, and, secondly, causes additional vibration in the tool, which can lead to his breakdown.

Gasoline models are most often equipped with a two.stroke engine, so they need to prepare the fuel mixture. What is its purpose? Since there is no crankcase and a separate system for oil lubricant in such engines, this role is directly played by a combustible mixture.

It is prepared in certain proportions and for one dressing. Immediately dilute several liters, with a “margin”, should not be, since the composition should always be fresh.

The main malfunctions of the starter of the trimmer for grass

It is not difficult to determine the cause of the breakdown of the starting device. There are several main options:

These details are shown in the photo below.

It may happen that the starting mechanism will be accidentally broken. The consequences will turn out to be deplorable if the ragged rope is wound around the flywheel of a working internal combustion engine: then the spring bursts, the pulley will tear off. But such cases when a complete replacement of the starting node is required, they rarely occur. In most cases, to fix the mechanism, it is enough to put a new spring or replace the cord.

Removing and disassembling the starter, replacing broken parts

To repair the starter of the trimmer for the grass, you will need to disassemble it first, and then collect it. This process is not a particularly difficult occupation. For work, you will need a screwdriver with the tip of the desired shape.

Everything should be done carefully, observing safety precautions, mainly that the spring does not injure the master if an accident.

Parsing the starting node

They disassemble the launch mechanism in order to install new parts instead of broken in the following sequence:

• spin a screw with a screwdriver, fixing the pulley with a starter lid;
• take out a spring and antennae;
• Remove carefully with the pulley (you need to unscrew the head or work, having dressed the glasses and gloves before);
• determine why the launch mechanism has broken;
• If the spring collapses almost completely, then it is replaced;
• When the spring exits from the hook, it is installed in the original place, bending the antennae before this (the photographs show the laying process);

To change the spring, you should work carefully and accurately: it can, under the influence of the effort caused by the installation of it in place, accidentally burst. Even if you carefully remove the video, then the spring strip flies very quickly from the coil and can injure your hand with its sharp edges.

Immediately putting a springy plate in the same place does not always work. It often slips, so attempts are required to repeat until the desired result is achieved.

Starter assembly

The assembly of the starting node is carried out in a number of stages:

When making the stated manipulations, it is necessary to lay two goals. If this is not done, then the spring over time damage the plastic cup, and when it is pulled. Because of this, a feeling appears, as if the spring had flown. To eliminate such a drawback, you need to install this part of a larger length or an additional goal.

When such spare parts are absent, you can just unscrew the screw a little, and the starter knot will begin to work without shaken. But this option is temporary. it is better to repair qualitatively as quickly as possible.

Spring tension

After installing the spring, it should be pulled. The following actions are performed for this:

• Remove the handle from the starter cord;
• Then the rope is inserted into the coil groove;
• They stretch the spring, rotating the coil in the direction opposite to the clock of the clock arrow (reviews);
• make the desired number of revolutions specified in the instructions for the use of the trimmer model used and the corresponding length of the cord used;
• At the very end, the rope is threaded into a hole designed for this, located in the starter cover;
• put the handle in place, fixing it with a node.

If after the repair the spring continues to fly, then you can get rid of this in the following ways:

• Squeeze the suitable piece of the plate into the groove at the location of the spring hook;
• drill holes on two sides of the groove in the coil, into which the spring hook is inserted and fix it using a wire.

Replacing a torn cord

A torn rope is replaced in the following sequence:

• The old cord is removed;
• choose a suitable rope (thickness and length);
• Having reached it through a special hole in the coil, a knot is tied;
• Sprinkle a spring, producing the required number of revolutions;
• Fix the pen.

It is better to stretch the spring plate along with the partner so that the edge of the cord does not hit the starter mechanism.

It is easy to assemble a starter on a trimmer and wound a spring, only you should do it carefully and with caution. For different models, the gas tanks of the launching mechanisms are the same, so they are repaired in a similar way. In this case, there are some nuances associated with their constructive features.

How to assemble a trimmer for grass correctly. step.by.step instructions photo video

Garden trimmers for grass are similar in design. Detailed instructions for one model will help to understand the intricacies of installation of analogues. Consider the main stages of the assembly of the electrimmer on the example of the model Fubag Fet 1200r.

We fasten the handle of the tool

Unscrew the screw “lamb” 2. Remove the upper fastener cover

To adjust the handle, you need to loosen the lamb and move it. Then the screw should be fixed.

Fubag electrimmers equipped with rubberized handles, which increases the convenience and safety of use. They allow you to reliably hold the tool even in wet hands.

Install a protective casing

Combine holes in the protective casing and in the mounting bar.

We fix the casing on the bar with screws with washers using the key from the kit.

In this model, the casing is attached with metal plates on both sides. This guarantees additional reliability and durability of the trimmer for grass.

The casing itself is made of dense, but elastic plastic. Such material will definitely not break off when hitting minor obstacles. We advise you to pay attention to this if you are only going to Select an electric trimmer for grass or benzotrimer.

We fix the shoulder belt

One of the simplest manipulations when assembling an electrimmer. Many will understand how the shoulder belt is attached intuitively. For those who are not sure, we decided to add several important points to the instructions:

Combine a carbine with a ring for fastening belt 2. Adjust the position of the mounting ring on the bar 3. We fix the ring with a fixing screw

Install the coil with a fishing line

First, combine the hole on the puck with the hole in the gearbox and stop a special rod.

Unscrew the mounting nut from the hub clockwise. 3. Remove the cup from the shaft and the squeeze puck

We twist the coil with a fishing line counterclockwise to the stop, holding the rod.

When choosing a trimmer for the grass, you should take into account the quality of the spool from the kit. Often it is the coil that becomes the subject of savings to reduce the total price for goods. How to identify a disadvantage? A good spool is distinguished by the quality of plastic, easily opens and allows you to season the fishing line for a trimmer without any difficulty.

Engine

In electric trimmers, engine power usually does not exceed 1.3 kW, and therefore, compared, for example, with gasoline units, they can be called low.power. However, they have a number of advantages.

The weight of electric trimmers is much less than the weight of the gasoline “brothers”.

They are easy to use, almost silent, do not pollute the environment and start with one pressing of the button, in addition, they do not need oil and gasoline.

Electric trimmers for grass are available in two types:

Electric trimmer for grass: device and principle of operation

A power cable with a fork is connected to the trimmer body for grass, through which electric current is transmitted. In the cavity of the detachable bar is a flexible shaft, thanks to which the torque is transmitted to the trimmer coil. The device is turned on by pressing the button located on the device handle.

This design of a trimmer for grass is the most common, but

If desired, you can find products working from the battery, as well as with the lower location of the electric engine.

Overview of the chainsaw “Parma

Parma chainsaws have a domestic purpose, are able to carry out sawing work, are used for rolling trees, caring for garden trees. Here are two modifications of gasoline chain saw “Parma”:

We list the characteristic features of the “Parma” chainsaws:

• ease;
• compactness;
• high power;
• affordable price;
• Carburetor-Pooluer;
• primer;
• durable, withstanding high and low temperature changes, body;
• three.point depreciation system;
• Quick Start;
• Convenient access to filters and candle;
• chain brake;
• AutoMAZA.

A brief description of the presented gasoline chain saws of the Parma trademark.

Parma BP 46-40

This household unit is used for various sawing work. Motopila mass 4.8 kg, power plant power 2 liters.With. The launch system is facilitated by a primer supplying fuel to a semi.automatic carburetor. The engine starting a manual starter.

The manufacturer supplied the tool of a three.point anti.vibration system. The supply of lubrication to the circuit is adjustable. The brake system will instantly stop the chain. Tires 40 cm and sawing chain are used for 57 links.

“I bought a trimmer ethletric for grass with a bent bar. Collected, turned on. everything works. The belts are not designed for high growth. I immediately threw it away, I had to sew it myself. The build quality is not so hot, but in the work of a braid for grass is convenient.””

“I have gasoline Parma, heavy, 10 kg. The motor is excellent. starts from the first launch. The fishing line for the trimmer in the kit is no good, I bought a more strong one, the disk is also not so hot, dull after 30 minutes. work. Shoulder straps with a stretch came up. Pulls on its price.””

Review: Benzotrimmer Kustorez Parma BTK.052. Trimmer for grass gasoline Parma Practitioner BTK-052-K. Budget lawn mower.

For the assembly and subsequent operation of the unit, the manufacturer provided for a complete set with an almost complete set of keys.

To the existing electric trimmer with a capacity of 1 kW, at the insistence of the spouse, “trimmer for grass-veins of the Parma Practice” was ordered. by passport, but in the order of the Internet. store “Onlinetrade.ru “he called up more prosaic” trimmer for grass gasoline Parma Practitioner BTK-052-K “, that’s why he attached the screen from the order page.

Regarding the used abbreviations: “BTK”. more or less clear. which most likely sounds like “a gasoline trimmer for grass-verter or a gas-resistant trimmer for grass-custores”, “052”. denotes the volume of the power unit in the cube. cm.,

But to decipher one more “to”, from the very edge I did not succeed, the reason seemed to me simple. I have not found the same abbreviation anywhere, namely BTK-052-K, without the last letter, t. e. “BTK-052”. There are a lot of offers on the vastness of the Internet, and with the last letter only in one store, it is probably a technical error. The selection of the store itself is due only to the desire to save the opportunity to use the accumulated bonuses. At the time of acquisition, this trimmer for the grass was distinguished by almost the most attractive price, and among the weaker versions of competitors there were no at all. The minus of this purchase can be considered not the most outstanding characteristics of the power unit at 52 cubic meters. cm. Only 2 l. With., I also remember the “in childhood” engine (for self-making) of a smaller volume for cubic centimeters such as D-5, D-6 issued about 5 liters of passport. With., True, he has a little more dimensions, among the current power units there are copies from 43 cubic meters. cm. give out 2.5 liters. With. Well, the second reason for the choice was the “tribute of memory”, as a child under the brand “Parma“. There was a production of power tools at one of the factories of Prikamye and, in particular, the electric counterpart of the famous chainsaws “Friendship” and “Ural”.

The factory delivery of the “hero” of my review consists of two “places”:

1) a box with a power unit and various accessories; 2) “bar” in cardboard packaging, a length of almost 1600 mm.The passport is quite voluminous “to match” the difficulties of a trimmer for grass.

Actually, the assembly scheme fit on the turn of the passport, it was quite enough for me. The completeness of metizes, did not check, because of the reason,

that this unit is subject to vibrations and many “metiz” can spontaneously unscrew, almost immediately in the nearest store bought a “second” set in case of possible losses.There are no lodges inside the box,

internal movement of elements is present, but it is not significant. The power unit with the controls is already delivered, there were some doubts about the need to carry out any adjustments, but this did not require.From the factory delivery to a suitable trimmer condition for the grass, the gasoline “Parma Practitioner BTK-052” is collected in leisurely mode and taking into account the time for

Conducting a passing lubrication of elements of a non.vegetable bar, refueling fuel, in total about an hour. I think this is a very good result.True, before buying, after reading the reviews on our and on third.party sites, I decided to immediately install another “spool”, in the photo it is yellow, the standard seems to be the complaints (the type of “spray” is indicated in the first photo).Of the interesting and useful “highlights” I can pay attention to the “cutter” of the fishing line.

The necessary thing in order to remove the excess fishing line during the semi.automatic “choice” of the fishing line from the “spool”. To control the trimmer, or rather. its launch on

management elements have appropriate explanatory inscriptions.As elements of the setting, there is an adjusting screw of the “idle”.Ergonomics of the control handle is also interesting.

The handle of a slightly anatomical shape, but only “slightly”, in principle, when “using” for a long time. The hand is a little tired, this creative approach was possible for reasons of “mowing of grass (shrubs)”, because the manufacturer declares only 80 kV in the technical characteristics of only 80 kV. m. the site on which work should be carried out, this provision can be interpreted as a time of continuous work, then in principle everything is in order.The belt mount is overruff, but the spring variety is clearly designed

not on a load of 8-10 kg (the weight of a trimmer for grass 8 kg), a springy effect designed to reduce the transmission of vibration on the operator’s shoulder belt is not observed.The fuel tank from the bottom is protected by a special plate, it is on the one hand

trimmer for PARMA PRACTIC BTK-043 Reviews

I really liked the trimmer for the grass. Before that, there were 3 Chinese trimmers for grass, which are not standing nearby with this oblique. Power is enough. Poster perfectly. Light. Starts without problems. Small gasoline consumption. Comfortable belts. The coil works without problems, the fishing line for the trimmer throws easily and on time. No need to smear a gearbox.

Bought a couple of days ago and immediately to work. Swings very well. Light, fuel consumption is small, the power is enough. In general, you can safely take.

Light, small fuel consumption, well starts up, quite powerful, good equipment.

Good braid for grass, not very noisy, there is enough dope. It starts easily. One drawback, this casing, is small, all the dirt flies away, but this is a trifle

A good braid for grass, not very noisy, not heavy, there is enough dope, I started it after the purchase from the third time.

I use 2 seasons in my site, no problems. After winter, the starter pulled 5 times. started up! Of course, it is weak for field work, but it copes with my 9 acres with a bang. The main thing is not to start the site, otherwise you can’t do without a cutter. In quality, it corresponds to the brand and price, I am satisfied!

Very hard springs on centrifugal clutch, so it does not work on small gas, the disk does not pull when spent, at higher speeds, gasoline eats as a horse, you do not have time to fill up, in comparison with Shtlevskaya of the same power, the gas trigger is very hard, after the hour of operation of the finger. You do not feel, the cone is very hot, the mounting knot of the bar to the engine to an unpleasant burning sensation, and so if that. then to ram.-. very good, and more. Strongly presses the right hand in the area of ​​the thumb due to the corner protrusion of the handle, in Stilevskaya they made more streamlined,

Leave your review for a trimmer for Parma Practic BTK-043 grass

It will be published after checking by the moderator!

Characteristics Trimmer for Parma Practic BTK-043 grass

All reviews are taken from open sources, or left by visitors to the site. The name of the goods and the inopromation of the product are taken from open sources. The administration of the Otzovik-Top site for reviews, goods and technical characteristics of responsibility does not bear.

Tonal base. Rimmel Lasting Finish 25hr Breathable Foundation SPF18

Elica Haiku IX/A/32

Artglass octave night city

Myryad MT100 b

GIFT! Feet cream. Christina Forever Young Body Pampering Foot Cream