How to cut the board with a disc saw. Bevels

Circular saws. briefly about the most important

For joiners, the board and timber are the most common blanks, of which in the future the production of crafts and wood products is carried out.

And the first thing the material is subjected to is the sawing on the segments of the required length.

At the same time, you should know how to spill the board evenly, because the incorrect performing this operation can ruin the workpiece or significantly affect the appearance, and not for the better.

For joiners, the board and timber are the most common blanks, of which in the future the production of crafts and wood products is carried out.

And the first thing the material is subjected to is the sawing on the segments of the required length.

In large enterprises, the problem of how to flatten a beam or a board smoothly does not arise. Any serious production has high.precision equipment that performs this type of work.

At home, you have to do what is at hand.

At the same time, the tool or equipment still needs to be able to correctly use to saw off the board correctly, and the cut turned out without flaws.

Note that many enterprises selling boards and timber provide services for their cutting. And for this they use all the same specialized equipment, so the purchased material will be cut qualitatively. But to use such a service is not always possible, and it often happens that you need to cut only one blank.

Cutting boards at home

You can cut off the board at home with such tools and equipment as:

Each of these options has its own specifics, which is important to consider before starting work, that is, you need to know how to cut a beam or board with a particular tool so that the quality of the cut is acceptable.

Circular saw. high performance and ease of work

Circular saw is the best option for performing work. It has excellent performance and allows you to cut a considerable number of blanks in a relatively short time, and with high quality. In addition, such a saw allows you to perform a longitudinal cut of the material, but you need to know how to cut the board along exactly.

One of the most important criteria when choosing a circular is the maximum cut depth. There are devices on the market that saw materials with a thickness of 30 to 130 mm. That is, you can choose a machine for cutting only thin boards, and for sawing bars.

It is also worth paying attention to the cutting tool itself. Disks with a large number of teeth will provide a neat high.quality cut, the speed of cutting will be low. But the wheels with a small number of teeth will provide high performance of work, but the quality of the cut will be worse.

Now about how to cut evenly a circular saw. One of the conditions of high.quality work is a reliable fixation of the workpiece. If the material is weak, then with the cut, the board can “go”, and the cut will be uneven.

If the circular saw is manual, then all the work should be done on a workbench equipped with stops and guides for blanks. Such a device can be made independently, taking as a basis any table.

Before the cutting, it is important to correctly establish the depth of the saw. Some hand saws have an adjustable side guide, with which you can perform a longitudinal sawing of the material. If there is no such device, then use the same workbench.

convenient in terms of work is a table circular, which is already equipped with everything necessary. guides, fixators. Often such equipment allows you to make a cut of workpieces at an angle.

In the process of sawing, it is important not to exceed the effort on the tool, otherwise the cut quality will be low, the increased load on the saw will lead to a rapid blunt of the cutting disk.

Do not forget about safety measures when using such equipment. Work should only be performed after checking the health of the saw and the correctness of fixing the workpiece. Also, do not neglect protective means. masks, glasses.

Hacksaw. simplicity and security

Hacksaw is a simple tool that is quite suitable for work. And although the speed of the cut is low, and significant physical efforts are required, for home conditions such a saw is the most acceptable option.

It’s easy to cut a knife hacksaw. The main condition for a high.quality section of the material is to make it right. To simplify the task, you can use the usual even block, which is used as a guide.

Often the question arises of how to sprinkle the board with a hacksaw at an angle. For this, a special carpentry device is used. knocking. over, it will help not only make the cut at the right angle, but will also allow any beginner to cut the board evenly.

You can also saw off the beam with a hacksaw. The only problem when working with such a workpiece comes down to the fact that you have to make a lot of effort.

The latter option is to use corner grinders for the work with an installed circle with teeth. But since the “corner grinder” is not intended for cutting wood, you can use this method only in extreme cases: attempts to cut the board can turn into serious consequences. It’s better to use a hacksaw. it’s time.consuming, but safe.

Stages of work

To cut the workpiece quickly, it is necessary to act in stages:

Take a board of the right size, determine the tool. If the workpiece has a large size, you should take a hacksaw with large teeth. With a smaller size of wood, take a saw with a smaller size of teeth.
The necessary marking is applied with a pencil and the ruler. Draw the lines barely visible to the naked gaze. You need to follow in accordance with the well.known proverb: “Measure seven times, cut one”.
First make a back. So that the canvas does not wag, experts advise to hold it with the help of a thumb or a special device called the stall. The procedure is greatly facilitated.
Cut the wood straight, do not wrap the tool with the tool from side to side. If the hacksaw is stuck in the material, carefully free it and try to cut it again.

When performing recommendations, the procedure will pass without problems. There is no need for special skills for implementing. Anyone can cut the material.

Greetings all readers and subscribers of my blog. Today I, Andrey LOCA, want to talk about how to saw off the board exactly. One of the highest quality and environmentally friendly materials for construction is rightfully considered a tree.

Principle of operation

If the jigsaw saws crookedly, you need to check the stability of the desktop and the strength of fixing the workpiece. With the help of a jigsaw, it is undesirable to cut a tree along the fibers, since it will be difficult to perform an even slice enough.

If you still need to do just such a job, then it is necessary to apply parallel emphasis. It is attached to the jigsaw on one side, and the second side should rest against the edge of the wood. This will provide an even cut.

Correct process

If during work it becomes necessary to cut a circle inside the wood, then you need to drill a small hole in the center of the future circle. Then a jigsaw is placed in it and move towards the circle designated on the material.

In the event that it is necessary to cut the hole in the shape of a rectangle, you need to move the saw along the side of the rectangle, then smoothly around the corner, cut out the next side. When the required hole is ready, you need to arrange the corners.

When performing work, it is not necessary to press hard on the tool, as this can cause overheating of the device and its failure. You do not need to use a file for too long, as it is blunting and begins to hook the edges of the wood.

When sawing durable materials, you need to lubricate the file with machine oil. Thanks to this, the cut will be easier to perform.

If the work is performed at low speed, then you need to take breaks, since the device is very overheated.

When working, you need to follow safety preca.

After the end of the work, the electrician must be cleaned and lubricated with machine oil.

The device can have a regular and pendulum course. In the first case, the jigsaw moves vertically. In this case, it cuts wood when moving up. The device that uses the pendulum course when moving up it supplied the lobby forward. With this method, the speed of work increases, and the tool canvas wears less.

Cutting under 45 degrees

But, if you still need to cut off a round cross.section of steel or various types of plastics, then for this you will need a pattern for cutting pipes at an angle, the shape of which is calculated by a manual or machine method. The task is greatly simplified if at an angle of forty.five degrees it is necessary to cut off the metal profile of the square section.

For cutting in haste, you can use the usual sheet of paper, folded diagonally, with which the surface for the future cut is marked. Using the folded paper, they come as follows:

carried out on the straight surface of the profile in the place where the cut is performed, strictly perpendicular fishing line for the trimmer;
Apply a sheet of paper folded on the side surface with the sharp end to the line so that the upper edge of the paper triangle is flush with the upper side of the metal profile.

Personally draw a fishing line for a trimmer along the side of the sheet at an angle of 45 degrees, after which the paper angle is applied to the other side and circled it with a pencil (it is better to use a thin marker).

For sawing off, you can use a corner grinder with a metal disk, conducting at the beginning a thin fishing line for a trimmer in marking, after which gradually deepening it to the complete separation of the edges.

Production of a template for pruning metal profile

If you need to cut a large number of pipes, you can make a template from a larger diameter over a paper sheet in the above method. The angle of inclination is checked by a transporter or a construction square. in this case, two edges of the cut parts of the template are connected.

When working in a cut part, a template is put on in the right place and pressed tightly, the marking is applied with a sharpened devil when staggering a template contour. The part is cut into several visits with a gradual deepening of the groove.

DIY pipe cutting pipes

The use of the template is not too convenient. you have to make a cut along the line, holding a corner grinder on weight, which leads to large errors. In the presence of a welding machine, you can make a simple knock. guides for a disk of corner grinding lifting, preventing it from gone to the side.

To do this, use the previously made template, in the lateral part of which a hole is drilled and the nut is welded. When working, homemade knock is put on a profile, a bolt is screwed into its nut and the device is pressed to the profile surface. Corner grinder with a disk through metal is carried out, slightly pressing the disk to the side surface of the device. It is clear that with prolonged operation the edges in stupla gradually grind, and although the process occurs simultaneously on all edges, some errors will appear over time. Therefore, the device is best made from solid wear.resistant metal to increase its service life and get a more accurate tool.

Selection of household saws: Einhell RT-CS 190/1

The main features are an ergonomic handle, due to which even a beginner will be able to cope with the tool. Including, and therefore, it is convenient to use the saw as possible when solving household problems. The master can easily replace the saw canvas thanks to the key and fixing the spindle. It is not necessary to purchase the key additionally, as it is included in the kit. It will be possible to work with equipment at home, as it differs in low noise and vibration levels.

This reliable and inexpensive circular saw has a dusting device with a special adapter, which is connected to the vacuum cleaner. Using this functionality, you can maintain the workplace clean. The gear of the gearbox is made of material of increased hardness and strength, which is distinguished by wear resistance and a long service life.

The manufacturer made sure that the work was facilitated, it also became possible thanks to the practical cable clamp. Among other things, it excludes damage and cable curls. The size of the disk is 190 × 30 millimeters, the number of teeth is 24. At an angle of 90 degrees, the operator will be able to delve into the material by 66 millimeters, as for 45 degrees, the cut depth will be equivalent to 48 millimeters.

The longitudinal cut of the logs

Before the cut of the logs, the optimal method is chosen, which depends on the size of the necessary lumber, the desired quality of the surface of the boards, wood of wood and technical capabilities.

They start the cut only after examining the logs, after which it is freed from the bark and branches. If there are no flaws on the log, then the processing is faster, and lumber is more of high quality.

Depending on the orientation of the annual rings, different types of cutting logs are used:

Radial species. the cut passes along the radius of the annual rings. Receive high.quality lumber that is not deformed.
Tangential view. a log is sawn down on the one.year.old rings. Pilomaterial is low strength.
Parallel species. the cut passes parallel to the fibers of the tree.

For sawing in the direction of fibers, the simplest circular cut. First of all, they cut off the hump. After that, the log is rotated by 180 degrees, and then cut the second hump. To receive boards, the log is constantly being turned.

For high.quality sawing, logs use general rules in different ways:

so that the log does not move during processing, it is reliably fixed; If the sawing is made by a chainsaw, then use a chain for longitudinal processing

So that the cut is even, and the saw does not take the saw, the chain should be well sharpened and not sag; For sawing manually, they try to choose a log of small length; Before sawing, the log is marked with a certain type of sawing; The logs on the boards begin with the cut of the hump on the boards; Particular attention is paid to security measures at all stages of sawing logs. The cut of logs is performed on their own using various cutting tools

The cut of logs is performed on their own using various cutting tools.

Electric or gasoline saws

The gasoline saw has advantages over the electric model:

the workplace is not attached to the power source;
higher power;
Thanks to the smooth start and speed adjustment, the danger of the rupture of the saw chain is reduced;
Continuous work for up to an hour, there is no need to interrupt the cut so that the saw is cool;
you can work with any humidity, for example, during the rain.

How to cut steep bevel without a table saw, steep bevel cutting jig for circular saw

Disk mini.pylorama

As a cutting element, one or two discs are used, separated by an insert.

Such a saw machine is widely used due to its advantages:

simple design equipped with an electric or gasoline engine;
simple use;
accuracy of the cut of the logs;
high performance when sawing logs.

The main requirement for circular saws is a strong bed and a powerful engine.

The peculiarity of the independent longitudinal cut of the logs is clearly visible on four simple ways.

Purpose and use of tools

Disk saws are equipped with many different elements and additional functions. For example, quite often on the tools there is an additional handle. It makes no sense to talk about her appointment. it makes work with a tool more conveniently. The only thing that should be noted is this element of 2 types. The most convenient, according to user reviews, is the handle installed on the saw platform. Most often, tools are equipped with an additional mushroom shape.

The disk saw is necessarily equipped with a protective casing. This element consists of two parts. The lower one is mobile, the upper is motionless. In the upper part there is a special hole through which sawdust is removed during the work. The hole may have different shape. If you do not connect a vacuum cleaner to your saw, then you can not pay attention to the shape of the hole. If the vacuum cleaner is connected, it is better to select a tool with a round hole, otherwise you will have to additionally look for a special adapter.

Disk saws are necessarily equipped with a crumbling knife. It is designed so that the disk does not clamp in the process. This element is attached with a pair of bolts. To make it more convenient to install and remove, there is a special hole in the upper saw cover. But there are models without such a hole. In such a situation, to obtain access to fasteners, the saw must be installed in a position that corresponds to the zero drink. The knife has to be dismantled quite rarely. Typically, the need for this arises when the workpiece has to be sawed from the middle, and not from the edge.

It is important to be able to work with the instrument start button. In discs, she was not quite simple

This button is associated with a protective mechanism that eliminates the risk of randomly turned on the saw. That is, you cannot press this button until you click on the unlock button. Thanks to this solution, a disc saw is as convenient to use as possible. The button may have a different size. It is more convenient if it is big.

Another important element of the structure is the mechanism of blocking the spindle. He makes the process of installing a discoster. It is found in most cases exclusively in expensive models of imported production.

Rolled curtains in the nursery: choosing tips

It is important to be able to handle a network cord. At first it seems very simple, but if the saw is used outdoors in cold weather, it is better that the power cord is in rubber insulation

This option is preferable than plastic, t.to. The rubber is more flexible and its elasticity does not decrease at low temperatures.

Quite often, modern models of disk saws are equipped with various electronics. It facilitates the operation of the tool and makes it more convenient. Most often there are functions such as smooth start, protection against overload, control of revolutions, maintaining a constant speed level.

Quick Start Control List

This is the first time you are going to do carpentry? If so, it means that you still do not have the necessary tools. We recommend trying a universal and affordable tool that feels comfortable in your hands. This will help you get some experience, and then you can choose a specific model or model in accordance with your needs and requirements.

When you are a newcomer, it is best to start with simple wood work and move on to more difficult tasks when you feel more security. When you have a tool at hand and you are ready to launch it, the best way to overcome your fear is to fulfill several tests to feel how it works. After that, you can start your first job.

When using a circular saw, it is very important to follow the safety rules, so here is a small control list for reading:

You should remember two important points: safety and protection. Although modern saws are designed to be compact and safe, this tool still requires your complete attention.
Before each use, check the saw to make sure that it is not damaged. Make a check of the safety of the blade and replace it if you see broken or broken teeth.
Inspect the cable and, please, do not forget to disconnect it from the network before performing any operations with the blade, such as cleaning or replacing.
The quality and speed of cutting depend on the state of the blade. To achieve the best results, make sure that the size of the sheet is smaller? Inches behind the edge of the board. Too deep adjustment of the blade can lead to a forced sawing and give a push back.
Never use a rusty or damaged blade! The choice of sheet is important, and you will find more information on how to choose a good sheet for carpentry products below.
Check if the sharp blade is enough, and if necessary, sharpen it. A sharp blade is safer and works more efficiently. On the other hand, a stupid blade could join the tree and overheat.
Make sure that the blade sits correctly and that the protective casing moves easily to cover the blade when it is not used.
Be sure to place the saw in a safe position. There are no strict rules regarding the direction of cutting, but you must keep the saw engine oriented towards most of the board; This will provide better support for the saw slab.
Make sure the blade is turned correctly.
Check your sheet or board to see if there are nails or nodes before reduction.
Remove all the cables from the cutting area and make sure that they are not damaged.
Put on a mask or protective glasses to protect the skin and eyes from damage.
Long sleeves in addition to gloves (gloves are necessary) will provide your hands with additional protection.
There is a risk of dust inhaling, so the use of a respirator or mask can be useful.
Hearing protection can be considered, since some work may not be so quiet.

Disco.saw for wood: choice and rules for working with tools

There are a large number of wood processing tools. In this article we will consider the disc saw. This tool quickly and efficiently performs wood processing. High.speed disc saws allow you to saw any wooden materials. Let us consider in more detail this electrical tool.

Manual models

Circular manual saw is an effective and safe tool. But still, the use of such equipment requires compliance with some operational rules:

Electric power connection. When using a saw on sections remote from the mains, an extension cord is often used. It must fully correspond to the power of the circular tool. Before connecting it, you should check the integrity of cable insulation. When connecting a saw to the network, check that the switch on the device is turned off.
Material fastening. The wood intended for the saw should be well fixed on a flat surface. For this, the material is placed on the workbench and fixed until its full stability.
The installation of the depth drank. The required indicator is determined using a special scale on the tool. When cutting the bar, the disk should not protrude beyond the material, otherwise the workbench may deteriorate. Therefore, it is recommended to fix the depth of the cut slightly less than the required value.
After installing all the necessary parameters, the cutting mechanism should be set in motion. Start the cut only with a rotating disk. The movement of the saw along the material should be smooth and even.

Angle rip cut with the circular saw and DIY guide

At the end of the working process, a manual circular tool should be disconnected from the network.

Hand disk saw

Such electric saws are designed for the exact direct saw of wood materials of small thickness. The manual circular device has small sizes and is most often used to work at home.

Small.sized equipment for cutting wood is necessary with the interior design of houses. Often manual circular saws are used during repairs to cut a laminate or finishing material for walls.

Read replacement of the oil pump on a chainsaw

Circulation table

When making a table for circular, the main thing is to choose the right material. For household needs, you can make a design of thick boards or plywood and put it in the garage. If you have to work with a large volume of materials, then the frame is better to build from a metal profile.

Any material that is used in manufacture must meet the following requirements, be durable, reliable, resistant to vibration, and also:

When arranging a table, it is necessary to provide grounding. If these conditions are not met, then the circular saw, at any time can be slowed down due to a broken drive or a jammed disk. As a result, the appearance of chips, a spoiled detail, and even the injury operator. The disc circuit saw installed in the table should be no more than a third of its diameter.

For the simplest version of the table design, take a sheet of plywood cut a rectangle on which a long drink is made. The end will move on it. On top of the width of the working plane of the circular saw, 2 guides are screwed. They can be from an aluminum corner. 2 stands are screwed to the plywood sheet from below. Their height should be equal to the depth of sawing the existing model of the saw. The instrument will go to this guide. From how the guide is fixed, it will be possible to make an accurate cut at any angle. A simple table is ready.

Specialists with the help of a circular saw cut parts of any form regardless of complexity. In order not to spoil the material and do not cause injuries, you should follow the safety rules. If you listen to the advice of experienced craftsmen, correctly configure the tool and arrange the sawn blanks, then at the output you get almost ready.made building material with the necessary parameters.

TOP-10 best circular saws according to customer reviews

The choice of a disc saw

The circular should meet the requirements of safety precautions, be clear to use. The profile of the teeth and their number on the saws must correspond to the type of work performed. The disk must be flat, without surface distortion. Before work, the disc plane is inspected by a ruler. For a flat mowing fishing line cutting, sharpening saws plays a decisive role. The sharpened teeth of the saw should not gleam at the corners. The presence of shine reads the missing amount of the polished metal. Burrs, breaks and spinners should not be on the cutting edges of the saw, the presence of these iron formations pulls the spoilage of wood.

We will see in more detail the aspects of which you need to direct attention before buying equipment.

The most important aspect when choosing a saw is its power. A large power indicator is required for wood files, the powerful tool will serve longer when performing its own work. When buying a saw, calculate for what work it is needed for you. Saws with high power have a lot of weight, making inconvenience during work. When performing light, short.term cuts, a saw with small power is suitable. It is light and small, with its help you will work rapidly and effortlessly. The power of the disc saw varies between 1200 watts and 2000 watts.
The subsequent aspect when choosing. this depth drank a disk saw. Modern circuses are able to make cuts at an angle of 45 degrees, when buying, you need to consider that in a straight drain there will be even more than at an angle.
A large selection of disk saws are another criterion. When choosing a circular, purchase a saw with a limiter for even removal of the edge of the boards. With this function you can cross the boards, making it trimmed.
It is necessary to pay attention to the number of teeth on the saw disk, the cleanliness of the cut of the board depends on their number. The more teeth, the cleaner the slice. If you need to cut a laminate or wood.fiber slab, choose a saw with 48 teeth.

Read gas station refueling oil and gasoline

Sticky tape for cut

So that there are no chips on the material, and the veneer retains its original appearance, you can use the sticky or differently-molar tape. It will not leave traces on a wooden board, and also protect the tree from visible mechanical damage.

The tape is attached in the place where the cut will pass. Next, you should carefully cut the board, after which you can remove the molar tape. It can only be dismantled from the cut and at right angles. The main thing is not to pull the tape up so that the plywood does not spread.

The main characteristics that cost first of all

The most common models on the market have engine power from 0.8 to 2.2 kW and revolutions 4.5-5.5 thousand per minute, weight varies from 3 to 7 kg

When choosing these 3 parameters are the most important, they need to pay attention to them first

Power

The higher the power, the better. But it should be remembered that the greater the power, the higher the cost, weight and consumption of electricity. Therefore, most often users dwell on medium.power options, from 1.0 to 1.6 kW. The exception is cases when the tool is bought to solve not entirely standard, “average” problems. for sawing only thin or thick material. In the first case, the lowest option is enough, in the second, on the contrary.

Disk rotation frequency

The higher the speed of rotation of the disk, the more accurately and cleaner it drank. However, according to the laws of physics, “increase in speed, reduces strength”. Therefore, with the same engine power, a more “fast” disk rotates with less force.

The scatter of the most popular models and manufacturers is small, from 4.5 to 5.5 thousand rpm, so there is no particularly noticeable difference in work. Nevertheless, experienced experts notice the difference in the speed of rotation of the disk.

The depth of the cut

The indicator directly depends on the distance to which the saw disk comes out of the bed (support platform) at right angles. With inclined sawing, the depth decreases. For example, with a tool with a depth of 54 mm depth, you can saw a beam with a cross section of 100 mm if you do a drink on both sides of the beam.

Changing the angle of inclination

Almost all disk saws of this type are equipped with this function (from 90 to 45 degrees)

When choosing, you should pay attention to the quality of the execution of the node. The screw clamps should be quite reliable, better metal (plastic clamps on budget models are often broken off)

The turn of the rotation of the rotation at the angle should be made of a sufficiently durable metal so as not to bend.

Saw disk

In practice, each manufacturer produces saws for discs of its size. It is not always possible to choose a suitable disk from a saw of the same power of another brand. Coincidences are, but not always.

The differences in the planting and external diameters of only a few mm lead to the fact that the “alien” disk is not suitable.

As a result, instead of sharpening and further use, they have to be thrown out and buying new. Whereas the teeth of the standard shape can be undermined, several times increasing the service life.

There are a lot of information on the saw disk, the numbers have the most important. one. Manufacturing firm. 2. Model and type of disk. 3. Dimensions. four. Type of tool used. 5. Type of sawn material. 6. Disk size. 7. The number of teeth. eight. Landing diameter. 9. Maximum turns. ten. Direction of rotation.

How to use

Disk saws are created for direct cuts, so using them is quite easy. The workpiece itself is not without fail to fix it with an irreplaceable, rather pressed with a knee to a stool and cut it off in a suitable place. It should be noted that for work it is fundamentally chosen by a suitable saw disk. To do this, you should know the three parameters:

disk diameter;
the dialect of the landing hole;
Suitable type of disk.

A-wood-brown slab, aluminum, plastic.
B. universal woody wheels with the highest quality of sawing.
C-for solid and soft wood, also wood-fiber slab, wood-bruise.
D. universal discs for brisk and rude sawing.
E. for high.quality cut of soft wood.
P. for frisky and rough cutting of soft wood.

Safety

Table disk saw. one of the most dangerous tools in the workshop. Rotating with a speed of more than 4000 rpm, a disk with sharp teeth, the number of which reaches 112, can directly or indirectly cause an accident. Directly when the fingers are in the immediate vicinity of the disk; indirectly, when the workpiece is pinched or the air trim is thrown out.

Protection from such dangerous situations is a slotted wedge and a protective casing, which are included in the set of each desktop saw. Some disc saws are additionally equipped with a safety coupling that protects the machine and working with it in the case of a sudden blocking.

A slotted wedge, located behind a sawing disk and on one axis with it, protects the part from entering the gap of cut parts. The distance from the wedge to the disk should be small to ensure the optimal openness of the gap.

Protective casing

The casing is placed above the sawing disk. When the parts supply to it, the casing is only slightly lifted, and after its passage, it again lowers to the table. Thus, the very probability of an accidental clash of fingers with a cutting disk is excluded.

In the photo on the right, the casing is missing. But this is done for clarity to show how to use this or that device, as well as a saw in the process. Of course, devices are used for a folded casing.

The protective casing allows you to hold your hands at a safe distance from a sawing disk; Sloping wedge prevents the pinches of the part.

Purpose and use of tools

It is important to be able to work with the instrument start button. In discs, she was not quite simple

Rolled curtains in the nursery: choosing tips

It is important to be able to handle a network cord. At first it seems very simple, but if the saw is used outdoors in cold weather, it is better that the power cord is in rubber insulation

This option is preferable than plastic, t.to. The rubber is more flexible and its elasticity does not decrease at low temperatures.

Working rules

Circular is a useful tool. It is necessary to work with it depending on a number of factors:

If the size of the cut is excessive, you can damage a strong workbench. It will not work on it later.

Do not remove the lower casing. When trying to remove it, the disk is excessively enters into the part and damages not only it, but also the surface of the workbench. You should first carefully consider how the tool will behave in the process of work.
The disk should not touch the workbench. To avoid this, slightly lift the cutting part. Infusks in the wood should if there are large revolutions. This will prevent the risk of losses and will allow you to quickly cut the part.
The material should lie on the desktop. In an suspended state, it is not allowed to work with him.
Firmly hold the tool, avoiding the wagging from side to side.
Before the start of the operation, fix the workpiece. With non.compliance with safety regulations, the part moves along with the tool, which is not acceptable.

Before starting work, carefully inspect the workpiece. Make sure that there are no nails, screws and other such interference in the surface. If such devices are present in the surface of the part, the saw may break, the disk is jammed. Also, this can lead to an injury or to other unpleasant situations.

The importance of compliance with safety precautions

Working with the circular, you need to be careful. Thoroughly season the clothes, turning the protruding parts and starting the belt and laces.

Keep the tool well. If he is wagging in the process of work, this situation can lead to a number of troubles: damage equipment, desktop and injure.

Cut dry wood with a saw. With non.compliance with the rules, you can quickly disable the tool. The circular will burn the motor.

After the end of work, you can put the saw on the workbench. She should stop completely.

Do not touch the bare wire, do not use the failed tool so as not to injure.

Subject to the rules to work with a manual circular saw will be simple and safe.

Sources:

https://rubimsrubi.ru/instrumenty/kak-rovno-pilit-cirkulyarnoj-piloj.html
https://101benzopila.ru/kak-pilit-rovno-cirkularnoj-piloj-rucnoj/
https://domdetaley.ru/kak-pilit-cirkularnoj-piloj/
https://domdetaley.ru/kak-polzovatsa-rucnoj-cirkularnoj-piloj-po-derevu-tehniki-pravilnoj-raboty-dla-nacinausih-pravila-bezopasnosti-i-zasita-osnovy-raspila-bez-verstaka/
https://benzo-electro-instrument.ru/kak-polzovatsa-rucnoj-cirkularnoj-piloj-po-derevu-tehniki-pravilnoj-raboty-dla-nacinausih-pravila-bezopasnosti-i-zasita-osnovy-raspila-bez-verstaka/
https://astfisher.ru/dekupazh/kak-pilit-cirkulyarnoj-piloj.html
https://101benzopila.ru/kak-pravilno-pilit-rucnoj-cirkularnoj-piloj/
https://101benzopila.ru/kak-raspilit-dosku-vdol-diskovoj-piloj/
https://sense-life.com/poleznye-sovety/kak-raspustit-dosku-ruchnoj-cirkulyarkoj/

Electric Saws board, disc