How to mow a motorcycle trimmer with curved handles. How easy it is to wind a fishing line for a trimmer to a trimmer head

Trimmer for grass. Types and device. Work and how to choose. Safety

The garden technique of o, which will be discussed, consists of four main elements: engine (electric or gasoline), long bar, control handles, cutting head. Due to the differences in the translation, these devices often appear under different names: a trimmer for grass, a grass carp, a lawn mower, an electric lawn mower, an electric cos, a haymaking and even a lawn mower. Because of this there is a confusion. Lawn mowed. a device for the care of the lawn, the main purpose is to maintain a neat appearance of the lawn.

The term electric lawn mower contains indications at once two types of engines. gasoline and electric, which is also not entirely correct. In fact, all types of braids are more logical to call trimmers for grass, which are divided into electric (electric cos), gasoline (motorcycles or lawn mowers) and battery.

You should also not be mistaken that a trimmer for grass is a tool for creating a decorative lawn. Pot the plot in no access for the lawn mower. The trimmer for the grass can. At the same time, it is unlikely to be able to rush the lawn using a trimmer for grass. The lawn in this way in appearance will give way to the result of work with a wheel mowing. But mowing the thickets of weeds with a trimmer can be easily and pleasant.

Technique of work with fishing line and disk

The technique of work with a trimmer with a string and a disk has some differences. So, the fishing line for the trimmer cuts the grass with the very end, but with too fast the movement is used for the entire length. As a result, the stems are not cut, and the grass is wound on the cord, which is why the engine is overloaded. Therefore, you need to choose the optimal wiring speed. In addition, when mowing high and hard grass, a fishing line for a trimmer is consumed faster than when cutting the lawn.

On a note! If you need to process the slope of the hill, its peak should always be on the right. You need to rise gradually at a distance equal to the width of the scope.

There are several simple recommendations, the implementation of which will make mowing more efficient and effective.

It is convenient to bite the garden paths, flower beds and the edges of the Lujaiks with a trimmer with an engine below. The plane of rotation of the coil of such a device can be placed perpendicular to the ground.
Thick thickets, large weeds, bushes must be mowed with disks or special nozzles.
When cleaning large areas, the device must be tilted to the left, in the direction of scope.
To mow grass around flower beds, shrubs and other objects, you should rotate the head of the trimmer for the grass with a casing to them. So it will turn out to bake objects themselves and not damage them.

It should be remembered that the bobbin or the disk should not touch the ground and any obstacles except grass and branches that need to be cut off.

Subtleties of working with a trimmer on an even relief

If you produce mowing according to a flat relief, then you should be especially careful about the direction of rotation of the coil. Firstly, it is important for both your personal safety and the safety of others. Secondly, taking into account this nuance will allow you to facilitate the work performed.

In principle, with the first moment everything is clear. Because knowing which way various small objects (for example, pebbles) fly away, you can always warn and avoid a possible trouble. But the second point, perhaps, requires explanation.

Explain. If, with mowing, you do not take into account the direction of rotation of the coil, then the mowed grass may be in a nodel area. As a result, you and your unit will have to make more efforts to mowed grass that has been under a herbal dump. over, the quality of kota in such conditions will significantly decrease.

That is, the direction of mowing must be selected, given the direction of rotation of the coil. So that mowed plants fly to the already processed territory.

Instructions on how to use a gasoline trimmer learning to start a tool

Before working as a tool, it must be initially started. How to get a lawn mower, consider in detail. First, the tool should be placed on a flat surface so that the disk fixed to the shaft does not cling to anything. After that, we proceed to the launch of the engine of the lawn mower:

Initially, fuel should be swollen into the launch system. To do this, press 4-5 times on a primer (soft hemisphere on a carburetor)

The above instructions for starting the engine and trimmers are appropriate for a cold start. If in the process of operation the tool was a pause, then when re.starting the non.surviving engine to close the throttle, there is no need. It is required to simply turn on the ignition, and pull the starter handle.

It is interesting!If the lawn mower is new, then do not forget that it is impossible to work at full power until the running.in procedure passes. This is important to consider, otherwise the engine details will quickly be worn out and will fail.

The first launch of an electric trimmer for grass

It is also not difficult to set up and running a trimmer ethletric for grass. To do this, it must be assembled and launched, but not to work right away. It will be best to start the device several times (3-5 will be enough) to make sure of the easy start. If the device starts without problems, you can run it for five minutes on the lawn grass, without strong loads.

Almost all modern electric trimmers for grass are designed for operating mode 20/20, t.e. Twenty minutes of operation and twenty minutes of rest. The latter is necessary for the engine to cool down a little. If you operate such a trimmer for grass for more than 20 minutes, preventing it from relaxing the necessary time, then the engine’s resource may decrease sharply, as it experiences an increased load.

The continuous operation mode in the electric trimmer is not provided, but, nevertheless, if you do not run into it correctly, gradually increasing the load and operation time (up to 20, but no more, minutes), the device can work incorrectly, delivering trouble to the owner with constant breakdowns and failures At work.

It is important to remember that the running.in and commissioning of the device is an integral part of the proper care of the technique. Thanks to this, the device will last much longer. Its further work largely depends on what the first launch will be. Do not rush, even if the volume of work is not small, it is best to give the electric motor a rest, because it will last much longer.

Gasoline gas mowing gasoline with butter

Before mowing grass with a benzo.leggos, it is necessary to season the tool with fuel. As fuel, gasoline with butter is used. However, take into account that mixing gasoline with oil is needed only for two.stroke engines. Four.stroke engines operate on pure gasoline, since their design has a separate container. oil crankcase. There are no 2-stroke gas crankcases in the design of the 2-stroke gasolimers, so you need to pour exclusively gasoline with oil into the tank.

As gasoline, it is recommended to use AI-92 brand fuel. In order not to make a mistake in choosing, you need to read the instructions offered by the manufacturer. Often, most manufacturers recommend using the AI-92 brand fuel, and only some recommend filling AI-95.

Gasoline must be diluted with a small one in a proportion of 1 to 25. This means that 40 ml of two.stroke oil must be added per 1 liter of gasoline. However, not everything is so unambiguous here. The proportion 1 to 25 is universal, but each tool model has its own values. These values are also indicated by the manufacturer in the instructions. details about how to properly dilute gasoline with butter into a lawn mower is described here. After breeding gasoline with butter, pour a full tank, and start work.

It is interesting!If a four.stroke lawn mower is refuel, then pure gasoline must be poured into the tank, and engine oil is added to the oil container to the maximum level.

Rules for working with a trimmer with mowing grass

When you select equipment for working in a summer cottage or in your garden, it is not necessary to run for the most expensive types of equipment that have great power. It is clear that power accelerates the work. But the fact is that power is always a large weight, large fuel costs, as well as the cost of the device. But here the problem is not the problem.

If you are the owner of a small garden, where shrubs and trees are growing compactly, and there is also a flower bed, then choosing a large lawn mower for a summer residence will be inappropriate. There will be no place to turn around. You will often cling the trees and accidentally cut off the branches on the bushes. The best option in this case is to buy an inexpensive trimmer for grass. They are always pleased to work, since the technique is easy to operate even for those people who have never worked with mowing grass.

A trimmer for the grass has a small motor, comfortable handles for holding and a fishing line for a trimmer, which is directed in a bastard.

If your site has only six acres and less, it is appropriate to use an electric trimmer for grass that works from the network. With the help of such a device, it is convenient to mow grass near the curbs, near the house, under the benches, around the trees. It is convenient to work with a trimmer in greenhouses and greenhouses, removing weeds.

Of course, the power cable on the trimmer is not large, but it can be continued by the extension cord. But if the requirements are not met, then you can find a trimmer for grass on a gasoline engine. There are also batteries for grass. The battery is enough for no more than an hour. But this is enough to row the grass in the garden or near the house.

Varieties of trimmers for lawns

There are trimmers for grass that have engines from above and below. Where the engine is located below, is called a lower.in.vigulative trimmer for grass. On uneven surfaces, it is best to use trimmers for grass with the upper location of the motor. There will never be a short circuit from moisture if the motor is in the upper part of the device.

It is very convenient to use a trimmer. However, there are still some rules for using this country equipment, which must always be observed in work.Before you start using a trimmer for grass, you need to check if there are stones, glass and other items on the site. When working, they can bounce and injure the operator.

The second rule is the installation of the cutting system. There are trimmers for grass that are not very powerful. The grass is mowed in them with a fishing line. But there are also such models whose engine power reaches one kilowatt. There are already installed knives. If large weeds are visible on the site, then you need to unscrew the nut on the mount and install a knife instead of a fishing line.

Starting work, you need to protect the chapter with glasses, since even the absence of foreign objects does not guarantee security. Shards of grass may fly into the eyes. If the trimmer for the grass works from the network, then we turn it on in the outlet. Battery devices require battery charging. If there is a fastening on the shoulders, then we dress them.

The cutting mechanism on the trimmer rotates counterclockwise. Mowing grass is very simple: you need to move the device from right to left. If you mow a lot, then it is necessary to divide conditionally the area with squares and walk “on squares”. If the site has a slope, then you need to mow from below, moving up parallel to the slope.

Trimmer care for grass

After the work is completed, you need special care for a manual trimmer: the equipment must be cleaned of the remains of the grass, and then carefully folded it until the next time.

A fishing line for a trimmer is wound on a bobbin, which performs a beard of herbs. Its edges are always visible outside. In order not to damage the fishing line for the trimmer, you do not need to close the head of the trimmer for the grass to the curbs, to fences and other hard objects. The bastard itself should not touch the earth, on which the fishing line for the trimmer is attached.

Mow grass with the ends of the fishing line. this is how a greater effect is achieved. If you mow grass with the entire length of the fishing line, then the motor overheats. If the grass is high, then you do not need to try to cut it at a time. At least you need to go twice. Otherwise, the grass will be wrapped in a coil. If this happens, then the motor begins to overload. Occasionally you need to stop the work and clean the head of the trimmer for the grass. Meanwhile, the engine will be able to cool.

Lubrication of the gearbox of a gasoline trimmer for grass

If the grass is very hard, then the fishing line will be quick. However, if you work carefully, fulfilling all the rules and requirements, then the fishing line will be minimal.Today, to buy a trimmer for the grass, just contact any garden center, where experts will help you choose the right equipment.

How to mow a tall grass with a trimmer

At least some owner of a suburban house, as it is also called a summer cottage, knows that in the summer and weaper, you need to take care of the lawn everywhere, in another way, he will lose his own external, pretty view. Therefore, some owners of giving are wondering how to correctly mow grass with a trimmer with a fishing line. And before you start learning to mow, it is necessary to choose a suitable tool for the site and only later to use it on the lawn.

The trimmer management can be thought by many, not an easy task, and nothing special (there is no complicated personal computer) if you correctly observe security measures and know how it is true to control it, if a garden inventory, the cutting of which is an iron disk.

Mowing a mower with a fishing line is much safer than a trimmer with a equipped cord, but not every time it is normal and profitable. The cutting basic element (mechanism) must be selected for considerations of the garden plot and weed height.

Previously, we considered how to mow a lawn mower with a fishing line in automatic or automatic mode and manual. In the automatic mode, the main cutting element (fishing line for trimmer) is released after each institution of the device of the device. That this is profitable, but on the other, it is not entirely economical, for example, your garden area of an unusual shape. there are uneven corners, zabins and each subsequent transition to different places, you need to turn off the device, and then turn on the ground. It is advisable to use the 2nd, automatic version under such circumstances. This is when the supply of the fishing line in the trimmer is carried out with the pressing of a special button located at the very bottom of the drum (in the cutting grass). It is quite easy to press the end on the ground and the fishing line for the trimmer will throw out.

How to set up a trimmer for grass, how to mow, than to refuel

If you are an operator, you need to realize that the length of the tips of the cutting element (fishing line) is placed on the drum in an elongated (working) state should not exceed not only 15 cm. This length should be enough for the average power of trimmers to mow grass.

What you need to solve, so that it is true, simply and rapidly mowing grass with a trimmer with a fishing line if you set the target itself, the device has served for you for a long time ordinary.

Try to keep the main drum (coil) from the ground at least 5 cm.
When you mow a slightly increased weed, the beginning of everything to mow its top, and later, pick up the stems to protect your own skill from a breakdown and prevent a breakdown of a mowing.
During the mowing of the grass, it is certainly necessary to introduce the cutting element (trimmer for grass) in which the coil is spinning about that direction.
Lawn grass, which is placed near the walls of the garden in the role of decor, is most perfect to mow, using only the edges of the fishing line so as not to overload the engine and not wear it very much.
Every processed for 15-20 minutes, let’s the device “relax”.

It is better to mow the highest grass in your own garden plot with a massive trimmer using a thick fishing line for a trimmer.

Alas, probably, they will probably agree that the Earth is almost always, where weeds are located, there will certainly be uneven, under the influence of which various garbage and various pebbles arise in the owners of such garden plots.

So that your precious device (trimmer for grass) does not fail the bevel of the highest grass is much better and safer to mow in two approaches. T.e. The beginning of all we cut the entire top of the grass, identify more complex sections of the mowing and pass by the mitch 2 times.

How to mow hard grass with a benzoca. Lifehack

When you are going to weed (using a trimmer for grass) to prepare for hay, and you acceptly understand your own area, then there is an option to predict the course of the bevel of grass in advance. this will be more frequent, more convenient and easier for you. The main thing under these circumstances is not to rush in the mowing, but good with the “cold head” approach the case.

During the bevel, try not to overload the mechanism.
If the highest grass is confused on the fishing line, then turn off the mechanism here so that the motor does not burn out.
If your trimmer for grass works on gasoline, mowing wet grass is only prohibited.

The device should move correctly for yourself and strictly from right to left, since the grass you mowed will certainly fall on the already mowed area, which will give you the opportunity to first mow the tops of the grass. Then you carry out the rotational movement, through which you will begin to remove the remaining processes of the grass to our client.

While working with large sections of the lawn, it is most ideal to divide the work by several steps, visually dividing the area into squares. During the bead of grass, you need to move on the outside, which allows you to additionally do not trawish the grass with all this, without complicating the bevel function for yourself. To work, it was easier to move in the best way to move from below, going parallel to the already processed area, then twisting back.

In this version, you can simply use a trimmer for grass with a fishing line during mowing the grass around the trees planted in this area, carefully bypassing them and at the same time, without loading the devices. If you mow the grass specifically with this method that we advise above, then you can easily lower the possibility of expansion of grass around, providing yourself with a more frisky and easy processing.

Help of hay is a trimmer

What is the term of the project what is your trimmer for the grass you need to prepare in any case before the work starts. If the trimmer for the grass is electronic, we need to charge it, or include 220 volts to the network and so start working. If you use a trimmer for the grass for begging grass with gasoline fuel, then season the tank.

Based on the design, prepare and check the cutting element. It will be useful to check the safety of a trimmer for grass. While working with the device, it must certainly be hung on the body and hold on correctly by the handle. Use a bevel of protective glasses or a special grid (protective) helmet at one time.

How to mow tall grass properly with a trimmer

Ideally, high grass can be mowed with a powerful trimmer with a thick fishing line. But, you must admit, the land where weeds grow is not always even, often among landowners in plots there are shrubs and all kinds of garbage, stones. In order not to ruin an expensive equipment. it is better to produce mowing in two approaches. That is, first we cut off the tops of the stem, look through the territory, analyzing the “complex areas”, and then we already carry out a complete mowing procedure with a gas station.

In a situation, if you have to prepare grass on hay, and you are more or less oriented in a state of earthen plot-then you can more easily predict your work. Any technique intended for mowing grass can also cope with high thickets. The main thing is not to rush and competently approach the process itself, which we clearly demonstrate in practical video.

Do not overload the mechanism;
When the grass is confused, instantly turn off the device;
Do not mow moist grass even a gasoline trimmer.

Buy a coil for a trimmer for grass, knives and discs. you can always with us, in a Kosikos store.

We season with a motorcycle

To refuel the chainsaws, not pure gasoline is used, but a working mixture that needs to be prepared in certain proportions.

The combustible mixture consists of gasoline with an octane number of 95 and high.quality oil intended for two.stroke air cooled engines.

The proportions should be 25 parts of gasoline per part of the oil.

It is better to mix components in a separate container, from which, using a funnel, then pour the mixture into a fuel tank.

After refueling braids for grass, you need to wipe the entire surface dry in places with traces of spilled liquid.

The first launch of an electric trimmer for grass

It is also not difficult to set up and running a trimmer ethletric for grass. To do this, it must be assembled and launched, but not to work right away. It will be best to start the device several times (3-5 will be enough) to make sure of the easy start. If the device starts without problems, you can run it for five minutes on the lawn grass, without strong loads.

Almost all modern electric trimmers for grass are designed for operating mode 20/20, t.e. Twenty minutes of operation and twenty minutes of rest. The latter is necessary for the engine to cool down a little. If you operate such a trimmer for grass for more than 20 minutes, preventing it from relaxing the necessary time, then the engine’s resource may decrease sharply, as it experiences an increased load.

The continuous operation mode in the electric trimmer is not provided, but, nevertheless, if you do not run into it correctly, gradually increasing the load and operation time (up to 20, but no more, minutes), the device can work incorrectly, delivering trouble to the owner with constant breakdowns and failures At work.

Security tips

Before starting work, it will not be superfluous to make sure that you have a protective equipment. For the most part, it is safe to work with a trimmer for grass, but there is always a chance that the machine will begin to throw garbage. At least wear goggles and closed clothes. Long trousers and thick gloves are suitable for the way. Before starting work, it will not be superfluous to inspect the trimmer for the grass to make sure of good working condition.

How to mow grass with a trimmer with a fishing line correctly?

Practical garden tools are increasingly popular. With the acquisition of a new assistant, questions are inevitable how to properly mow grass with a trimmer with a fishing line. To begin with, this is an excellent addition to an existing lawn mower. She can be entrusted with large areas, and finish work will be done by a trimmer for grass with fishing line. We clarify that the trimmer fishing line is designed to cut weeds and delicate branches. For more rough work, models equipped with metal blades or chain are used.

Safety precautions during work

The technique of work with a trimmer with a string and a disk has some differences. So, the fishing line for the trimmer cuts the grass with the very end, but with too fast the movement is used for the entire length. As a result, the stems are not cut, and the grass is wound on the cord, which is why the engine is overloaded. Therefore, you need to choose the optimal wiring speed. In addition, when mowing high and hard grass, a fishing line for a trimmer is consumed faster than when cutting the lawn.

There are several simple recommendations, the implementation of which will make mowing more efficient and effective.

It is convenient to bite the garden paths, flower beds and the edges of the Lujaiks with a trimmer with an engine below. The plane of rotation of the coil of such a device can be placed perpendicular to the ground.
Thick thickets, large weeds, bushes must be mowed with disks or special nozzles.
When cleaning large areas, the device must be tilted to the left, in the direction of scope.
To mow grass around flower beds, shrubs and other objects, you should rotate the head of the trimmer for the grass with a casing to them. So it will turn out to bake objects themselves and not damage them.

It should be remembered that the bobbin or the disk should not touch the ground and any obstacles except grass and branches that need to be cut off.

Shindaiwa trimmer head replacement

Safety precautions when working with motorcycles are to fulfill the following requirements.

Do not use trimmers in the rain or with increased humidity.
People and animals should be at a distance of at least 15 m from the working device: trimming of grass, small garbage and stones fly out from under the cutting head at high speed and may injure.
It is better to put on the grass trimmer to a dense fabric that completely closes the arms and legs.
You need to work in protective glasses, gloves, headdress, closed shoes, special headphones or Berushas.
The wire of the network trimmer for the grass should be behind the mower.

So, the use of manual vehicles for mowing grass allows you to maintain order on a small area. It is more convenient to use a mower in vast areas. In addition, a trimmer for grass is relevant when harvesting hay and restoring order in the territory: small herbal scraps can be mulched strawberries and other useful plants. You can clearly see the mowing process with this tool on the video.

Unlike a disk. to mow a trimmer with a cord is safer, but not always optimal. As they say, it is worth choosing a cutting mechanism for the features of your work site or using complex systems, where you can operate both the disk and the fishing line for the trimmer, if necessary, installing the first or the second or the second.

As we already wrote, a lawn mower with a fishing line is automatic, semi.automatic and manual. In the first case, the cutting element is “thrown away” after each new launch of the apparatus. This is very convenient, but not economical enough, for example, if your site is irregular in shape, and contains corners, zabins, and with a long transition to each of these areas, the mechanism must be turned off and turned on.

It is important for the operator to understand that the length of the ends of the fishing line, which he sees in front of himself in an elongated state is exactly the diameter that will mow the device. You can read the rules for refueling the fishing line in a coil in one of our articles, but the main thing is to remember: the length of the ends of the fishing line should be optimal to conduct competent mowing.

How to mow a benzoca? This must be done so that it serves you as long as possible:

keep a coil at a height of 10 cm from the ground;
when working with high grass. mow its top, and then by the stem to protect yourself from its winding to the device;
Drive the device in the same direction in which the coil rotates;
lawn grass, especially at the walls and garden decor, it is better to mow the fishing line with the tips so as not to overload the engine;
every 15 minutes take a break to the device.

Any answers to questions about braids you will find in this section of the site, but we will propose the spare parts for lawn mowers among another assortment for a benzo tool.

Do not overload the mechanism;
When the grass is confused, instantly turn off the device;
Do not mow moist grass even a gasoline trimmer.

Buy a coil for a trimmer for grass, knives and discs. you can always with us, in a Kosikos store.

Safety precautions during work

Safety precautions when working with motorcycles are to fulfill the following requirements.

Do not use trimmers in the rain or with increased humidity.
People and animals should be at a distance of at least 15 m from the working device: trimming of grass, small garbage and stones fly out from under the cutting head at high speed and may injure.
It is better to put on the grass trimmer to a dense fabric that completely closes the arms and legs.
You need to work in protective glasses, gloves, headdress, closed shoes, special headphones or Berushas.
The wire of the network trimmer for the grass should be behind the mower.

Important! You can’t stretch your hand or foot to the cutting head!

How to use a trimmer

Tips on how to mow grass

Mowing grass when it is not very large. This will allow you to cope with work much easier and faster than if you mow a strongly overgrown lawn or yard. A large mass of grass, weeds, plants and trimmer will be hard to grind. In addition, a lot of chopped grass will lie on the surface, which must either be cleaned, or wait until it dries, or while it becomes compost, which is not very beautiful and can cause various diseases of the grass.
Avoid mowing not grass, but fences, stones, bricks, any other hard objects, as this will greatly accelerate the wear of the fishing line and it will require its more common replacement.
Some will have to wear an orthopedic corset (although it may seem stupid). Back support allows you to maintain performance longer and feel more comfortable.

Ryobi String Trimmer Head Replacement 311759014

Warning how to use a trimmer

Trimmer for grass, like a twin.franc grinder, chainsaw or garden tractor is unreasonable for what it is not intended for.

Keep a trimmer for the grass away from yourself so as not to cut off your fingers or leg.

Do not mow a trimmer in water or wet grass. If you have an electric trimmer for grass, you may hit an electric shock. If you have a gasoline trimmer for grass, you can pollute water and grass with fuel and exhaust gases.

You will need things to mow grass

Pants. Preferably strong working jeans without holes. You can mow grass somewhere, so if your legs are not protected, soon you will feel how several thousand ants crawl along your legs and bite you. Sometimes a weed can scratch to the blood or stuck strongly, thrown back on the mower.
Gloves. wandering, leather, it does not matter. If you mowed grass without gloves, then by the end of the kota you will not be able to move even a little finger without pain. The weight of the grass through a trimmer for the grass presses in the hands and abrasions and scuffs will appear on their hands if they were not in protecting gloves.
Protective glasses. you cannot mow grass with your eyes closed, because small pieces of grass fly in the face. One good hitting your eyes will convince you that protective glasses are mandatory. This applies to one of the main rules how to use a trimmer.
Have a sufficient amount of drinking water at hand. Even if you think it will not be hot, think again. You need to mow grass with a vibrating trimmer for a long time.
Have a spare fishing line for a trimmer or a seasoned trimmer head to replace if it ends.
If you have an electric trimmer for grass, you must have an additional extension cord. If you have a gasoline trimmer for grass, you must have a supply of fuel.
Rake to rake mowed grass or weeds.
Headdress if you work in the sun.
High boots (pants are best tucked into boots).
If you plan to work at dusk or later, make sure that you have a spray from insects and a lantern.

How to mow tall grass properly with a trimmer

Do not overload the mechanism;
When the grass is confused, instantly turn off the device;
Do not mow moist grass even a gasoline trimmer.

How to use a trimmer for grass

Garden trimmers for grass are effective. Beginners believe that working with the lawn mower is quite simple, because you just need to connect it to the outlet or season it with fuel, but this is not so.

The effectiveness of garden tools and their service life directly depend on operating conditions. Therefore, before using a trimmer for the grass, it is necessary to perform preparatory work.

Thoroughly inspect the lawn that can mow grass. Be sure to remove glass and large stones. Having flew out from under a working mower, they can injure a person. The wire is removed from the lawn, because it can be wound on a rotating element, breaking the mower.

Then go to the installation of the cutting system. On sale there are small power trimmers for grass that use only a fishing line for a trimmer. Designed for mowing lush and soft grass. But there are models with a capacity of more than 1 kilowatts that are equipped with metal knives. They cut out the sown thistle and other hard weeds and cut out young shrubs.

To replace the cord with knives, it is necessary to unscrew the mounting nut, install the cutting element. Then the nut must be returned to the place, tighten the wrench.

The operator must take care of his safety. Mow grass in thick protective clothes. To protect the eyes, special glasses are used that will protect from dust, grass and flying fragments. Cover your hands with gloves.

Read how to choose the right mitch for the lawn

The electric trimmer for grass is connected, and the batteries are charged a few hours before use. Fuel is poured into a gas mower.

The lawn mower is held so that the coil or knife is parallel to the ground. When the tool is installed in the correct position, start the engine. After mowing the grass, the lawn mower turns off.

The first start

Before the first launch, the operator collects a lawn mower, the procedure is described in the instructions attached to the product.

If the trimmer for the grass is gasoline, it must be checked before use. The fuel tank is filled to the neck.

The engine should operate on fuel, so at the first launch it should work for several minutes without load. Then start mating grass.

How to season a gas trimmer for grass

Gasoline braids for grass are supplied with two.stroke and four.stroke engines. The first option is much more common. What are the differences between them:

Trammers for grass with a two.stroke engine respond faster to pressing the food lever (for this reason, the brush machines are mainly equipped with this type of engine);
A tool with a two.stroke engine will be much easier, as well as easier to maintain;
Fuel consumption in a two.stroke engine is higher than in a four.stroke engine with a similar power by about 30%;
The 4-stroke engine is more environmentally friendly, because the fuel in it burns completely and is not thrown into the atmosphere, and its noise level is much lower;
And the most important distinguishing feature is the refueling: the two.stroke engine is equipped with one common tank into which gasoline mixed with butter is filled; The 4-stroke engine has a separate gas tank and engine oil tank.

For refueling, it is necessary to use fresh gasoline AI-92 or AI-95 and high-quality motor oil for garden equipment (for 2- and 4-stroke engines, manufacturers produce different types of oil). You can use mineral, semi.synthetic or synthetic oil.

The ratio of gasoline and oil for trimmers with a two.stroke engine can be found in the operating instructions for a particular model. Usually it is 50: 1, in some cases a ratio of 25: 1 or 40: 1 is recommended. The fuel mixture should be prepared in a separate container with accurate proportions. Never pour fluids “on the eyes” right into the tank without having previously mixed them. Detailed instructions for mixing gasolis, with video and description, can be found on our website here.

Works in

Lawn mowers should be launched before the start of work. The operator turns on the engine; It should be for a while. It is necessary to ensure that the engine does not overheat, there should be no load.

When the mowing is operating, the load increases gradually. If you run at high speed, the engine will work poorly, which will affect the further operation of the lawn mower.

At the first launch, there is no need to fully develop a temporary resource. After the engine is idling, you can start processing the lawn. The lawn mower should operate for no more than 15 minutes, after which the engine turns off, it must cool.

If you want to run an electric trimmer for grass, first collect the belt. Then perform a trial launch at least 3-5 times. If the engine works fine, go to the comment. At first they work no more than 5 minutes, then the duration of work gradually increases.

How to wear a belt

If the tool is installed on the shoulder, it hangs on the shoulder before use. A trimmer for grass is attached to both shoulders if he has a backpack.

The model with a bicycle handle holds both hands, the D-shaped handle turns around the palm. The belt needs to be worn so that it is comfortable, then the back will not get tired.

How to cut a lawn so that it is even

To evenly cut the grass, lower the lawn mower as low as possible during operation. The plot should be divided into squares. You need to work clockwise. In this case, hay will always lie on the left without interfering with your feet.

Spear under hay

It is better to mow not a fishing line, but a metal disk. Grass is cut under the root, maintaining its length as much as possible.

Mow high grass

If you need to mow high grass, this is done in a few passes. Heals the lawn 2-3 times. The rotating part is lowered from top to bottom, and in this case the grass is not wound on the reel.

The operator must remember that the injured grass around the coil causes the engine. If this happens, the bureau is turned off, and the bobbin is cleaned.

Most effectively mow the grass with the ends of the fishing line, and not along the entire length. In the second case, the tool works worse, engine overload is possible. If you need to cut the grass on a large area to increase efficiency, a trimmer for grass should be tilted to mow.

Wet weather

Electric mowers should not be used during the rain, a short circuit is possible. When the rain stops, you need to wait until the grass dries.

Sources:

https://pridesaratov.ru/selhoztehnika/kak-rabotaet-elektricheskij-trimmer.html
https://tehnostroiplus.ru/sad-ogorod/kosit-travu-trimmerom.html
https://protechniky.ru/dlya-sada/trimmer-dlya-travy/instruktsiya-po-ekspluatatsii-benzinovogo-i-elektricheskogo-trimmera-pervyj-zapusk-obkatka-tehnika-kosheniya-mery-bezopasnosti
https://mzoc.ru/prochie/kak-kosit-travu-trimmerom.html
https://pridesaratov.ru/selhoztehnika/kak-kosit-travu-trimmerom.html
https://zsm-miass.ru/avtobrendy/kak-pravilno-kosit-trimmerom.html
https://ss-p.ru/remont/kak-pravilno-kosit-travu-trimmerom-s-leskoi.html
https://ss-p.ru/remont/kak-pravilno-kosit-travu-trimmerom.html
https://nomadcar.ru/selhozmashiny/kak-polzovatsya-benzokosoj.html

Grass Trimmer easy, handles, motorcycle, trimmer