Mower conditioner HP requirements. Mower conditioner HP requirements

New hay mowers on the market

Case IH, Claas, and New Holland have all expanded their hay tool lineups by launching new mowers for 2022.

Title: New Products Editor Resides In: Des Moines, Iowa Hometown: Cedar Rapids, Iowa Education: Iowa State University Expertise: Agriculture machinery Contact: alex.gray@agriculture.com Background Alex has been with Dotdash Meredith since 2021, starting in the imaging department where they worked on magazines across the company’s entire portfolio. They joined the Successful Farming team in December 2021 as the New Products Editor. As a newcomer to the field of agriculture, they have been devoted to learning everything there is to know about farm machinery. Alex grew up in Cedar Rapids, Iowa, and graduated from Iowa State University in 2020. While attending Iowa State, they joined the Iowa State Daily, a professional student-run news organization, working as an arts and entertainment writer, editor, and digital managing editor for the organization. EducationB.S. degree in public relations, minor in english creative writing

Hay producers, start your engines, because Case IH, Claas, and New Holland have all announced new mower lineups for 2022.

Each lineup from the three companies has a variety of models to fit small or large operations.

Case IH DC5 series disc mower conditioners

Case IH is now offering new size options for center-pivot DC5 series disc mower conditioners, designed for higher performance in a smaller build. Other changes to the mowers are designed for better crop flow, faster dry drown, and no-tool adjustments to the implement.

The DC105 disc mower conditioner is a new configuration from Case IH with a modular cutterbar that has a width of 10 feet 1 inch. The conditioning system is available in rubber or flail style. A smaller center pivot and overall size is designed for easier road and small-field navigation.

The DC125 has a longer swath gate, with adjustments made to fins and wedges to enhance cutting and windrowing over previous models, and has a cut width of 11 feet 7 inches. The DC135 model is replacing Case IH’s DC133 in the company’s mower lineup. This model has a cutterbar width of 13 feet 1 inch, with eight discs. Both of these models have the option of rubber, steel rolls, or flail conditioning.

READ MORE: CASE IH DEBUTS DRIVERLESS AUTONOMOUS SPREADER

The new DC165 is replacing the DC 163, as well, with an even larger cutterbar at 16 feet 5 inches and ten cutting discs. This model is offered with rubber or steel roll conditioning.

The new DC5 series disc mower conditioners are available to order now. For more information, visit CaseIH.com.

CLAAS DISCO 9300 TREND Mower

The new Disco 9300 mower from Claas has a large working width available in either 29 feet 2 inches or 29 feet 10 inches configurations. Despite the size, the Disco has a lower profile, with 150 PTO HP power requirement, and doesn’t require a monitor for operation.

The cutterbar is designed to be maintenance free, with a bolted, torsion-resistant build. Each cutterbar has eight contra-rotating mower discs, uniformly spaced for an even cutting pattern. The one-piece base plate is made of 5 mm thick steel and creates a dirt-removing tunnel effect in connection with the skids. The intermediate pieces are shaped differently for converging and diverging mower discs to enable an effective cut as a counter blade and for maximum overlap.

READ MORE: CLAAS ANNOUNCES NEW TRACTOR AND COMBINE FOR 2023

The protective curtains on the mower fold out wide for access to the cutterbar for maintenance, and the build is designed to prevent the turning and attachment points from rusting. The mower bar is equipped with a quick knife change system, with color-coded blades to make changing them out easier, and the replacement blade box is divided into three compartments to keep them sorted.

For more information on the Claas Disco 9300 Trend mower, visit claasofamerica.com.

New Holland Discbine PLUS series

With the introduction of the new Discbine Plus series, New Holland focused on enhancing cutting and swath controls for its center-pivot disc mower conditioners. All the models in this series use a newly redesigned cutterbar, similar to the one featured on New Holland’s Durabine Plus disc headers on the Speedrower Plus windrowers.

The cutterbar has longer knives for a faster tip speed, designed for improved cut quality. The models have a 30% lower cutting height than previous models, to leave less behind in down and tangled crops. Reshaped rock guards help with crop-to-knife engagement.

The Discbine Plus’ conditioning system is sized for each model for uniform conditioning and fast drydown across the entire series. Conditioning options include intermeshing rubber or steel rolls. A flail tine conditioning system is also available.

READ MORE: NEW HOLLAND’S WINDROWER HAS A NEW LOOK FOR 2022

The swath gate is 5 inches longer, with adjustable crop spreading wedges to break up crop streams. These also have adjustable crop fins to make windrows as 3- to 8-feet wide. The forming shields are also 5 inches taller than previous models and work with the swatch gate to make a tunnel effect designed for more windrow control and neater swaths.

The Discbine 310 Plus has a six-disc cutterbar with a cut width of 10 feet 1 inch. This model can be equipped with a 540- or 1,000- rpm drive, and requires as little as 80 HP to operate. The 312 Plus has a 11 feet 7 inches wide cut, with a 1,000 rpm drive. The 313 Plus has a wider cut than the 312 with an additional 1 foot 4 inches to its width. The 316 Plus has the widest cut in the series at 16 feet 5 inches.

For more information on the New Holland Discbine Plus series, visit agriculture.newholland.com.

Kubota

For the ultimate experience in disc mower conditioners, you can’t beat the Kubota DMC8540R. Boasting a massive 13’ 1” working width and 12’ 6” transport width, this disc mower conditioner ensures you’ll cover ground and maneuver with ease as you work throughout the day. With the DMC8540R’s centrifugal force tines and adjustable conditioning plate, you can achieve your desired conditioning in any crop season after season.

DOWNLOAD BROCHURE

RELATED MODELS

Generous ground clearance and exceptional capability.

Expand your productivity on large hay-cutting operations.

A tight transport width and wide working width.

Cover more ground and dig in for the long haul.

A tight transport width and wide working width.

10 discs and 30 blades for the highest quality cut.

Expand your productivity on large hay-cutting operations.

Exceptional suspension and maneuverability makes for the best cut.

Professional attributes, professional results, easy to operate.

A heavy duty machine, gentle on fragile crops.

Expand your productivity on large hay-cutting operations.

Expand your productivity on large hay-cutting operations.

Easy adjustment and increased productivity.

Cover larger swaths of land and increase your productivity.

Cover more ground with less wear and tear.

KUBOTA SPECIAL OFFERS

Utilizing centrifugal force is what makes the Kubota SemiSwing conditioner stand out among other conditioning systems. It offers an aggressive conditioning effect with excellent tine protection and virtually no wear and tear. The conditioner plate can be set in 3 positions, according to the required conditioning effect. Depending on crop conditions and the amount of crop you are cutting, the plate is easily adjusted to achieve the desired conditioning.

The DMC8500 series offers a secure and convenient transport solution, including an integrated lighting kit for excellent road visibility. The transport width for DMC8536T and DMC8536R is 11’2, the transport width for DMC8540T and DMC8540R is 12’6, and the transport width for DMC8547T and DMC8547R is 14’9.

DMC8500 series models have a lifting height of 1’6 to ensure excellent ground clearance for transport and during headland turning.

All models can be fitted with an optional easy-to-use wide spreading kit. This enables crop to be cut and spread in one operation, saving both time and resources. Best of all, changing from swathing to wide spreading is a one-man-job.

Mowers can be fitted with the ‘Express’ system for quick and easy changing of knives. Simply place the lever around the bolt, release the spring by turning the lever and the knife is ready to be replaced with a new one.

The fully welded Kubota cutterbar with overlapping C-channels makes for a stiff and strong design, ensuring a high level of durability. The cutterbar’s design, with machined gears and large bearings along with low oil requirements, allows for a low working temperature for efficient oil cooling and lubrication of the entire cutterbar.

Rotating Three-Bladed Discs

With three blades per disc, Kubota mowers are constantly cutting. This means a third less load per blade, an even load on the drive and smoother power usage – which produces an even, cleanly cut stubble. Each steel blade is precisely angled to immediately discharge the cut crop upwards by both air flow and mechanical action.

A simple crank adjusts the whole cutterbar assembly up or down to a desired stubble height. Additional skids are available to increase cutting height.

The long spring design allows for excellent ground following ability. In uneven fields, the mower is able to adapt 19.7/-5.9 The suspension springs are fitted on the widest possible position of the mowing section to ensure even ground pressure. The weight on ground is stable and only approximately 88.110 pounds on each side. The suspension arms are fitted between the mowing section and mainframe so when an obstacle is encountered, the mowing section moves backwards and upwards to allow the object to pass. The mower will automatically return to its working position once the obstacle is cleared.

The complete mowing section, including the conditioner, is suspended independently from the main chassis by either two or four long adjustable suspension springs, allowing field tracks and contours to be closely followed. If an obstacle is encountered in the field, the mowing section will lift up and backwards, protecting the cutterbar from damage. When the obstacle is passed, the mowing section automatically returns to the working position.

The DMC8500 models are equipped with a center pivot drawbar for mowing both to the right and left side of the tractor. This important advantage in mower design allows operators to mow in one continuous pattern, without the need for constantly opening up new headlands. Consequently, time consuming short runs are eliminated and mowing capacity is increased.

Mower-conditioners

the outermost points of the overhead support frame enables very large pivot travel. Together with parallel adaptation, FZ mowers guarantee optimum ground adaptation, have a low impact on the sward and thus ensure high-quality.

disc mower KDTC series

Working width: 3.4, 2.6, 3 m

than 20 years of experience in manufacturing disc mowers Own design ofPerfectCUT cutterbar tested on markets across the world 2-year warranty Farmers’ trust than 1 000 KDTC mowers working.

disc mower DC series

Working width: 10’00, 11’00, 16’00, 13’00Power required: 80, 85, 90, 100 chSwath width: 6’00, 7’00, 10’00

widths. CENTER-PIVOT MODELS DC133 AND DC163 Long-Lasting Durability The cutterbar on the DC3 series center pivot mower conditioners features a combination of larger disc diameters and wider conditioning.

flail mower NOVACAT series

Working width: 3.04, 2.62, 3.46 mPower required: 80, 60, 70 chSwath width: 1.1 m. 2.7 m

by our NOVACAT rear mowers with centre pivot mounting. The NOVACAT rear mowers are available with working widths of 2.62 m / 3.04 m / 3.46 m / 3.88 m / 4.30 m. These mowers can.

drum mower F-FALCIATRICE 260 SARRACENIA

Working width: 2.55 m

The new Sarracenia front mower, with a 2.60 m cutterbar, is fitted with an innovative ground tracking system that reduces the impact of the cutter bar with the unevenness of the ground and guarantees both optimal cutting.

drum mower F-SARRACENIA 320

Working width: 3.24 m

The new Sarracenia front mower, with a 3.20 m cutterbar, is fitted with an innovative ground tracking system that reduces the impact of the cutter bar with the unevenness of the ground and guarantees both optimal cutting.

drum mower SARRACENIA 130

Working width: 1.3 m

Our Sarracenia 130 two-drum rear mounted mower has a cutting width of 1.30m. The whole range is equipped with a transmission system with helicoidal conical gears, which improve power transmission reducing consumption.

disc mower SILVERCUT 300 F RRC

Working width: 2.9 mPower required: 80 chSwath width: 1.4 m. 2.4 m

to the first disc. ROLLER RUBBER CONDITIONER (RRC) The profiled helix-shaped rubber rollers rotate against each other and compress stems lengthwise, allowing quick moisture loss. WIDE.

disc mower SILVERCUT 340 F RRC

Working width: 3.32 mPower required: 90 chSwath width: 1.6 m. 2.6 m

to the first disc. ROLLER RUBBER CONDITIONER (RRC) The profiled helix-shaped rubber rollers rotate against each other and compress stems lengthwise, allowing quick moisture loss. WIDE.

disc mower SILVERCUT 300 S FPC

Working width: 2.9 mPower required: 80 chSwath width: 1.4 m. 2.8 m

The construction of the SILVERCUT DISC 300 S FPC mower ensures optimal power transmission and efficient mowing. The mower follows the ground perfectly and provides complete control over mowing, regardless.

flail mower FROG series

Working width: 96 cm. 112 cmPower required: 15 kW. 20 kWPTO speed: 540 rpm

The Light flail mower mod. FROG is suitable for small tractors. The flail mower Frog is Rear mounted for 540 rpm on PTO, cut grass in small pieces (mulching) and is possible to cut small branches fitting.

rear-mount mower FOX series

Working width: 1,000 mm. 1,500 mmPower required: 25 kW. 40 kWPTO speed: 540 rpm

The flail mower mod. FOX is used for grass cut (Mulching) and verticut on grass fields. The flail mower Fox is Engineered to be mounted on light tractors three points linkage with low HP power and.

rear-mount mower FOX-S

Working width: 1,160 mm. 1,500 mmPower required: 35 kW. 45 kWPTO speed: 540 rpm

The flail mower Fox can be fitted with different flails for grass or small branches cuttuning. Rear Mounted Side Shift Flail Mower for 15 to 30 Tractor HP. The FOX S Side Shift Flail Mower.

disc mower 5-6 Disc Mower with Conditioner

Working width: 2,650 mm

Technicial Specifications. 5 Disc. 6 Disc Length. 1530 mm. 1530 mm Width. 4050 mm. 4460 mm Height. 1170 mm. 1170 mm Working Width. 2250 mm. 2650 mm Working Capacity. 2,3 ton /hr. 2,8 ton /hr Tail.

disc mower 5-6 Disc Mower Without Conditioner

Working width: 2,250 mm

Technicial Specifications. 5 Disc. 6 Disc Length. 1530 mm. 1530 mm Width. 4050 mm. 4460 mm Height. 1170 mm. 1170 mm Working Width. 2250 mm. 2650 mm Working Capacity. 2,3 ton /hr. 2,3 ton /hr Tail.

drum mower 195cm Drum Mower with Conditioner

Technicial Specifications. Mower interval. 1.950 mm Number of Knives. 8 Work cycle. 540 dev/dk Drum number. 2 Tail shaft speed. 8. 10 km/hr Length. 3.200 mm Width. 1480 mm Height. 1.100 mm Work.

disc mower TREX CP series

Working width: 290, 320 cmPower required: 90 chSwath width: 80 cm. 150 cm

obstacles without violent shocks, safeguarding the cutting system. ROLL rubber roller conditioner. Addictional wearproof skids (optional). Blades roller conditioner.

disc mower DMC TREX series

Working width: 245, 290 cmPower required: 90, 80 chSwath width: 65 cm. 130 cm

Disc Mowers with Conditioner series DMC-TREX 290 – 320. The drawbar can be hydraulically shift.ed and the block valve ensures a secure locking system. It is possible to choose between models without conditioner.

disc mower DMC ROLL series

Working width: 205, 245 cmPower required: 80 ch. 100 chSwath width: 75 cm. 145 cm

transmission to the rubber roller conditioner. Transmission by gears. The transmission system by gears allows to keep constantly in traction the two rubber rollers in case they touch.

disc mower KE series

Working width: 1,600, 2,000, 2,400, 2,800, 3,100 mmPower required: 30, 35, 45, 50, 55 chPTO speed: 540 rpm

Proven Designed Cutter Bar Long Lasting Knives Lowe Running Cost Clean Forage Cut Kayhan Ertuğrul Mak. San. ve Tic. A.Ş, reserves the right to modify the technical characteristics and specification of its products without prior notice.

disc mower NM 3200 F

Working width: 3.2 mPower required: 60 kW. 90 kWSwath width: 1.2 m. 1.8 m

Finally, a front mower conditioner with all the benefits of a trailed mower conditioner! The ELHO NM 3200 F front mower conditioner.

disc mower NM 3700 F

Working width: 3.7 mPower required: 70 kW. 100 kWSwath width: 1.2 m. 1.8 m

World’s widest front mower conditioner The ELHO NM 3700 F is the world’s widest single-beam front mower conditioner. With a cutting width of 3.7 metres, this model.

disc mower NM 2400 VC

Working width: 2.4 mPower required: 50 kW. 80 kWSwath width: 0.6 m. 1.4 m

Impressive flow through the unit with high driving speeds plus fast drying results! The ELHO NM 2400 VC (vertical centre) mower conditioner has all the important ELHO features built in! The centre-suspended.

disc mower KM-300L

Working width: 3 m

designed the KM-300L mower series with productivity and grass quality in mind for agricultural and contractor users. The KM-300L mower series is available in three build configurations – plain disc mower.

disc mower KM-600B

Working width: 9 m

The Keltec KM-600B butterfly mower-conditioner is the ideal solution for high capacity grass mowing and harvesting, when used in conjunction with a front mounted mower. The KM-600B butterfly.

disc mower KM-300T

Working width: 3 m

The Keltec KM-300T trailed disc mower with conditioner has been designed and constructed with Irish grass conditions in mind. The simple and strong design of KM-300T makes it a popular choice for many.

disc mower KD 2510 KOS, KD 2910 KOS

Working width: 2.85, 2.4 mPower required: 61, 88 chPTO speed: 540 rpm

durability. It facilitates easy hitching of the disc mower to the three-point linkage of the tractor, with high comfort and efficiency of work. Mower bar side suspension is simple, but makes the mower.

disc mower Rotex XR series

Working width: 2.05, 2.45, 2.85 mPower required: 40, 50, 55 kWPTO speed: 540 rpm

slopes or combined with front mowers. The cutter bar features a compact yet hard-wearing profile. The conditioner offset rollers achieve a better flow of the forage both when coming.

disc mower Rotex Avant NT R series

Working width: 2.45, 2.85 mPower required: 50, 55 kWSwath width: 1,200, 1,350, 1,250, 1,500 mm

The Rotex R Avant NT are front-mounted mower-conditioners with limited weight and dimensions for use on both traditional and isodiametric tractors as well as on special tractors configured for mowing.

disc mower NEVA R7 | R8 Avant

Working width: 2.85, 3.25 mSwath width: 1,350, 1,700 mmPTO speed: 970 rpm

The NEVA R7 | R8 Avant front-mounted mower-conditioners are designed for professional haymaking. Intended for the market of large surface areas and intensive agriculture, their strengths lie in their.

flail mower M series

Working width: 8.9, 9.8 mPower required: 180 kW

horsepower and cutting widths. Unique Front Mower and Conditioner The AUTOCUT pull-type front mower features a patented rail system, with an effective pivot point just above the.

disc mower SZF/SZL series

Working width: 60 cm

The Solo-Swing is a hydraulically driven swinging arm to mow around trees, posts and other obstacles. The SZF and SZL models are mounted onto the front of the tractor with a mounting plate; A front linkage is not necessary. The swinging.

disc mower SZX-850

Working width: 85 cm

The Solo-Swing is a hydraulically driven swinging arm to mow around trees, posts and other obstacles. The SZX is equipped with a headstock for front linkage; a version for behind the tractor is also available. The SZX is equipped with.

disc mower ZF2 series

Working width: 150, 180, 210, 240 cmPower required: 44, 50, 55, 65 kWPTO speed: 1,000 rpm

Extremely powerful side flail mower for intensive use. Large offset possibility to work far next to the tractor track; for example in ditch sides or in combination with a front mower. The ZF2 is a.

disc mower DEBORA

Working width: 1.6, 2, 2.4 mPower required: 30, 45, 20 chSwath width: 1.1 m. 1.7 m

MASCHIO GASPARDO disc mowers guarantee a high flow of forage with a low power requirement. Designed to meet the needs of smaller farms, DEBORA is reliable, durable and has a precise cut. Available with working widths.

disc mower R2 Series

Working width: 4.94 mPower required: 231 chWeight: 2,154 kg

The all-new MacDon R2 Rotary Disc Header and M1 Series Windrowers deliver a Knock-Out performance in a wide variety of crops and conditions. Featuring MacDon EvenFlow™ Technology, the R2 delivers the best possible cut, conditioning, and.

disc mower GXF P series

Working width: 315, 355 cmPower required: 82, 95 ch

JF cutterbar, strong and reliable with integrated stone guard. Quick change knife standard, reduced service time. Contour Float, perfect ground following and optimal cutterbar protection. Can be used with reverse-drive tractors.

drum mower CT42

Working width: 4.2 mWeight: 3,500 kg

Pull-type mower-conditioner CT42 with coverage width of 4.2 m can be aggregated with 1,4 cl. tractors on mowing grass with putting it in swaths. For high quality cleaning of different types of grass.

disc mower B9000

Working width: 8.56 m

McHale Pro Glide Mower Range to the world market. McHale will be exhibiting three new products from this range; the McHale Pro Glide F3100 Front Mower, the R3100 Rear Mower and the B9000.

disc mower Procut 3000 TC / 2600 TC

Working width: 3, 2.6 mPower required: 90, 100 chPTO speed: 1,000 rpm

All new Malone Procut trailed mower. Suitable from the farmer to the contractor. Features.Hardox Semi-Swing Steel Tines.Shear Hub Discs.Friction Clutch.Overrun Clutch.3 position conditioner.

disc mower TRIPLEX 660

Working width: 6.6 m

6 independent disks driven by hydraulic transmission. 3 conditioners with independent rubber rollers driven by hydraulic motors. Front-mounted mower conditioner.

flail mower WFM series

Working width: 1.25, 1.45, 1.75, 2.25 m

long grass and woodland rides, the WESSEX WFM FLAIL MOWERS are a real tough performer and are perfectly suited to the job. Hammer flails pulverise tough material while a full width adjustable rear roller.

disc mower MF series

Our disc mower and his design guarantees excellent durability and power absorption. The disc’s shape prevents hay build-ups and it can be easily removed and replaced without disassembling the entire cutting bar. The hydraulic.

reach your clients in one place, all year round

Your suggestions for improvement:

Filters: find the right products faster. Terminology: use the most common industry terms. Brands: a wider selection. Products: to improve the relevance of the collection. Other

Receive updates on this section every two weeks.

Please refer to our Privacy Policy for details on how AgriExpo processes your personal data.

With AgriExpo you can: Find a nearby distributor or reseller| Contact the manufacturer to get a quote or a price | Examine product characteristics and technical specifications for major brands | View PDF catalogues and other online documentation

are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

R1 Series

Don’t be limited by transport width. In just 30 seconds our Road Friendly Transport TM option, transforms both our 13 and 16 foot R1’s to a narrow 9 foot wide transport. This allows for quick, safe travel to, from, and between fields.

Some products and/or options may not be available in all markets. See your MacDon Dealer for availability.

No Mow Limitations

No matter what the harvest situation or conditioning need, the R1 lays down well-formed, well-conditioned windrows with the industry’s widest roll at 129” (328cm), and four interchangeable conditioning options. Don’t limit your harvesting possibilities, find out why more top producers trust MacDon for their harvest.

9’ Wide Road Friendly Transport (Optional)

Road Friendly Transport TM option is available on both models. This dealer installed option transforms the R1 to a road friendly 9’ (2.75m) wide transport. Switch from field to transport in 30 seconds, for quick, safe travel to, from, and between fields. Moving from a 10 to 16 foot mower can increase productivity by 60%, making this option ideal for operations where width restrictions are the limiting factor.

Clean Cut 3 Year Cutterbar Warranty

Our low profile forward mounted cutting discs provide a flat header angle resulting in a cleaner, smoother cut than ever before. And this new design is backed by MacDon’s 3 Year Cutterbar Warranty. That’s our way of ensuring worry-free harvesting performance.

Serious Conditioning

Featuring the industry’s widest conditioning roll at 129” (328cm), and 4 interchangeable conditioning options. Choose from Steel Inter-Meshing, Polyurethane Inter-Meshing, Finger Conditioner, or No Conditioner option. The R1 lays down well-formed, well-conditioned WIDE to NARROW windrows to suit a variety of conditioning needs.

Low Horse Power Requirements (PTO Completion Package)

Requires only 100hp for 13’ and 125hp for 16’ model. 1000 PTO 1.375” (35mm) / 21 spline or 1.75” (45mm) / 20 spline. Less horse power means less fuel consumption.

Polyurethane Iinter-Meshing Conditioning Roller Option

Conditioner Action

• A combination of the wide rolls (129”) which promotes a thin material mat and the roll profile (crush type) is ideally suited to such crops as alfalfa, alfalfa/grass mix
• Also effective for finer stemmed plants which usually have more solid stems like native hay, timothy and bermuda grass

Steel Inter-Meshing Conditioning Roller Option

Conditioner Action

• A crimp style is especially effective for stiff or solid plant stem material
• Produces well-formed windrows over a wide range of widths

• For high volume crops where aggressive feeding through header is an advantage, such as milo, sudan grass, and oats
• In smooth stemmed crops like timothy, the steel bars provide positive crop flow from cutterbar to the windrow
• For alfalfa producers, the steel inter-meshing roll action assists plant dry down by creating uniform crimps on the plant stem, without bruising the delicate leaves
• Able to provide consistent conditioning through uneven crop volumes
• In areas where crops and or conditions are considered to be abrasive
• Extremely durable requires minimal maintenance

Finger Conditioning Roller Option

Conditioner Action

• Crops and conditions where removal of stem waxes combined with fluffier windrows are able to achieve desired dry down times such as Coastal Grass and other mixed forages
• Requires the least amount of horsepower of the conditioner types