Threading The Line Into The Trimmer Head

Filling the line into the trimmer The line feed system from the trimmer can be manual, semi-automatic and automatic. Here is an example of how to thread the line into the trimmer (Trimmer BOSCH Art 30).

We fill the line in the trimmer.

I want to devote today’s article to the sore subject of summer residents and gardeners of the entire post-Soviet space How to fill the line in the trimmer. Not many trimmer manufacturers answer this question in their instruction manuals. Therefore, it is difficult for ordinary gardeners to figure out how to do it correctly.

I want to start with a brief description of the technical characteristics of the trimmers.

So, trimmers are electric and gasoline. The cutting element for trimmers can be a line and a knife. The line is ordinary, four. Pentahedral and intertwined (in the form of a pigtail). Knives come in 2, 3 and 4 bladed knives. There are also plastic and metal knives.

The line feed system from the trimmer is manual, semi-automatic and automatic.

The development engineers who create new models of trimmers clearly calculate the diameter (thickness) of the line and the number of knife blades, according to the power of the trimmers. Otherwise, the motor is overloaded, resulting in damage. And these are additional and significant costs.

Trimmers on the market today:

With one nozzle only with a line.
With two line nozzles and three-four-blade knife.
With one nozzle only three-four-bladed knife.

Our Kulibins have long ago learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacement of fishing line with a metal cable, or fishing line. But at the same time, they do not think about the safety of their own and their loved ones, because, like a cable with the power of a working trimmer, it can easily break out and not only injure the mower and others, but leave him crippled for life. Using a fishing line can and gives a better effect, I have never personally tried it than a trimmer line, but such work has a number of inconveniences: when it comes into contact with hard objects, it loosens or can simply be pulled out of the reel without limit.

So, what is called closer to the topic. Here is an example of how to thread the line into the trimmer (Trimmer BOSCH Art 30). Everything is very simple. We started.

After you have chosen the line for refueling, you need to cut off the required amount of line, because all the line in the skein will not be wound into the reel.

Cut off and start winding.

Remove the coil and the protective cover from the coil.

They took it off. We fasten one end of the line into the gap and carefully and evenly wind the line.

The amount of line should be such that the protective cover of the reel closes and the line on the reel unwinds a little by itself.

We put the other end of the line into the hole on the protective casing.

Next, we take the coil and the protective cover of the coil. We squirt the end of the line from the reel into the metal hole on the reel’s protective cover. We tighten the line a little.

We put it all on the trimmer. Turn the coil clockwise until it clicks.

They fixed it. Now we connect the trimmer to the network. We put the trimmer in the starting position for work. We turn on the trimmer. Excessive line length will be cut on the trimming blade.

Coil in trimmer

That’s all we start working on.

Material you can see

A little advice. Try not to let the line come into contact with hard objects when cutting. With this contact, the line will be cut. And since in this trimmer the line is not fed automatically, then every time you have to stop work, remove the reel and release the line again.

In addition to the standard lawn line, my trimmer has a thick line for cutting rough weeds. It has the shape of a pigtail, i.E. Three lines are tightly intertwined. This line has its own spool. Spare coil storage space

It is very simple to install such a fishing line into the reel according to the internal scheme inside the reel. We insert the center of the line with a metal mount in the upper part of the reel, and draw the ends of the line along the grooves and bring it out.

Heavy-duty line in a reel

Such a reel is attached to the trimmer in the same way as a reel with an ordinary line.

Material you can see

Spare coil storage space

Thick line

It is stored at the top of the trimmer body.

In addition to the standard lawn line, my trimmer has a thick line for cutting rough weeds. It has the shape of a pigtail, i.E. Three lines are tightly intertwined. This line has its own spool.

We fill the line in the trimmer.

I want to devote today’s article to the sore subject of summer residents and gardeners of the entire post-Soviet space How to fill the line in the trimmer. Not many trimmer manufacturers answer this question in their instruction manuals. Therefore, it is difficult for simple gardeners to figure out how to do it correctly.

I want to start with a brief description of the technical characteristics of the trimmers.

The line feed system from the trimmer is manual, semi-automatic and automatic.

Trimmers on the market today:

With one nozzle only with a line.
With two line nozzles and three-four-blade knife.
With one nozzle only three-four-bladed knife.

Our Kulibins long ago learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacement of fishing line with a metal cable, or fishing line. But at the same time, they do not think about the safety of their own and their loved ones, because, like a cable with the power of a working trimmer, it can easily break out and not only injure the mower and others, but leave him crippled for life. Using a fishing line can and gives a better effect, I have never personally tried it than a trimmer line, but such work has a number of inconveniences: when it comes into contact with hard objects, it loosens or can simply be pulled out of the reel without limit.

So, what is called closer to the topic. Here is an example of how to thread the line into the trimmer (Trimmer BOSCH Art 30). Everything is very simple. We started.

After you have chosen the line for refueling, you need to cut off the required amount of line, because all the line in the skein will not be wound into the reel.

Cut off and start winding.

Remove the coil and the protective cover from the coil.

They took it off. We fasten one end of the line into the gap and carefully and evenly wind the line.

The amount of line should be such that the protective cover of the reel closes and the line on the reel unwinds a little by itself.

We put the other end of the line into the hole in the protective casing.

Next, we take the coil and the protective cover of the coil. We squirt the end of the line from the reel into the metal hole on the reel’s protective cover. We tighten the line a little.

We put it all on the trimmer. Turn the coil clockwise until it clicks.

They fixed it. Now we connect the trimmer to the network. We put the trimmer in the starting position for work. We turn on the trimmer. Excessive line length will be cut with the trimmer blade.

Coil in trimmer

That’s all we start working on.

Heavy-duty line in a reel

This reel is attached to the trimmer in the same way as a reel with an ordinary line.

How do I fit the line into the trimmer? Operating tips

The trimmer is an excellent modern device designed for mowing unnecessary grass, and its main advantage is that this technique can be used in places where an ordinary lawn mower will simply not be able to reach due to its massiveness. It is necessary to understand in more detail what trimmers are, and how to choose the best option for a particular suburban area.

What is a trimmer?

This equipment is based on the following elements:

Motor, the main function of which is rotation of the cutting head at the end of the rod;
The head itself, consisting of a coil, on which either a fishing line or a knife can be wound;
Knives or fishing line rotating at high speed, which are the main cutting part of the device, how to load the fishing line into the trimmer will go a little further.

Threading The Line Into The Trimmer Head

An electric device is inferior in its power to a gasoline one, so it is ideal for working on a standard plot of land that is adjacent to a house with an electric power source. The main advantages of this technique are the absence of noise during operation, light weight, ease of use and, of course, environmental friendliness.

As for gasoline trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any area. It is not necessary to use electricity here at all, which positively affects the functionality of such an apparatus, the cutting attachments can be changed, working with weeds of various types.

One of the most common attachments is the fishing line, so you should dwell on this element in more detail.

Types of trimmer line

As a rule, line separation is based on different sample diameters, which can vary from 1.2 to 4 mm. The most commonly used material is a material with a thickness of 2 mm, but in no case should we forget that the choice should depend primarily on the trimmer model.

There is one main rule here: the more power the apparatus has, the thicker the line should be.

This element can also differ in the type of its section. So, it can be round (suitable for cutting plain grass) or square (for mowing soft green cover), sharp edges (tall grass), or be equipped with notches ideal for thin grass in diameter.

Do not forget that with the help of a fishing line it is allowed to mow only grass, and for other, coarser vegetation, it is imperative to use knives.

Next, you should take a closer look at the process of how to insert the line into the trimmer correctly. Indeed, it is with this procedure that many consumers often have difficulties.

How do I fit the line into the trimmer?

Any machine for mowing vegetation is necessarily equipped with a spool, which, in turn, may differ in different models by the filament feeding system (automatic, semi-automatic and manual). It is from this parameter that it is worth starting from before deciding how to thread the line into the trimmer.

In order to tuck the line into the trimmer, you need to take at least 5 meters of material, which is then folded in half. The center of the cutting element must be inserted into a specially designated place, and then the cutting attachment must be wound using the visual cues on the spool indicating the direction. At the end of all the work, the lid, of course, will need to be tightened.

Line adjustment

One of the main rules when replacing and adjusting equipment, any manipulations with the mechanism should be carried out exclusively with the engine off and the device plug disconnected from the mains.

Perhaps these tips will tell you how to tuck the line into the trimmer as correctly as possible and, accordingly, give your site a neat and aesthetic appearance. All that is required is to correctly select the cutting material required by the type and, of course, to determine the category of the trimmer used itself.

How do I fit the line into the trimmer?

Types of trimmer line

There is one main rule here: the more power the apparatus has, the thicker the line should be.

Do not forget that with the help of a fishing line it is allowed to mow only grass, and for other, coarser vegetation, it is imperative to use knives.

Next, you should take a closer look at the process of how to insert the line into the trimmer correctly. Indeed, it is with this procedure that many consumers often have difficulties.

What is a trimmer?

This equipment is based on the following elements:

Motor, the main function of which is rotation of the cutting head at the end of the rod;
The head itself, consisting of a coil, on which either a fishing line or a knife can be wound;
Knives or fishing line rotating at high speed, which are the main cutting part of the device, how to load the fishing line into the trimmer will go a little further.

One of the most common attachments is the fishing line, so you should dwell on this element in more detail.

How do I fit the line into the trimmer? Operating tips

Line adjustment

How to wind line on a trimmer reel: key points

A gasoline or electric trimmer is an indispensable tool in the arsenal of a modern summer resident or owner of his own home.

Thanks to these gardening devices, even a large garden plot can be mowed with ease. After purchasing this tool and performing several mows, many people think about how to properly wind the line on the trimmer spool. For an inexperienced user, the first operation to replace it will seem problematic and time-consuming, since the developers often do not fully reflect the instructions for replacing the line in the operating manual.

Trimmer head with two antennae

Double flute head

After removing the spool from the reel body, we determine the number of strands for winding the line (1 or 2). There is no fundamental difference between bobbins with one and two grooves, but if carelessly threading into the twin groove, there will be operational problems. Due to the likelihood of interlacing adjacent lines of the tool, a situation may arise when, after wear of the working antennae, it is impossible to remove new ones.

Regardless of the number of streams, a fishing line with a length of 1.5 to 3 meters is taken for refueling. Winding must be done in the opposite direction to the rotation of the head, since winding in the direction of travel will lead to the fact that the line will not be removed from the reel. After the fishing line is tucked into the trimmer coil, thread the free ends (15-30 cm) into special holes. Next, we assemble the head in the reverse order of disassembly and check the operability. Do not worry if the ends of the two antennae are very different in size, because when you start the trimmer, the knife installed on the protection will cut off the excess.

Winding the line to the trimmer

Measured and neat dismantling of the spool from the spit coil makes it possible to go directly to winding the line. The design features of the head, the number and location of the fixing holes dictate the sequence of actions when performing this operation, and also determine the methods used. Today there are several types of reels, depending on the number of line antennae and the methods of threading it:

Trimmer head with one working mustache;
Bobbin with two line antennae;
Automatic winding reel.

Preparing to wind the line

Before the winding process, it is necessary to remove the spool with line from the body. Depending on the manufacturer, power and type (electric or gasoline), there are three design types of trimmers:

Compact electric trimmers.

Straight bar trimmer

This model provides the ability to install a knife. Removing the coil in such models is done by means of two keys recessed into the coil body. To mount the trimmer knife, it is necessary to align the hole of the reel and the rod, and then insert the device in the form of a steel pin (screwdriver, iron bar). After fixing the coil, the body can be easily twisted clockwise by hand.

Single-barbed trimmer spool

Brushcutter reel with one antenna

Many owners and experts note the ease of use and ease of refueling the bobbin with one mustache. Depending on the manufacturer, the length of the threaded line can vary from 2 to 5 meters. The end of the line is inserted into the head into a special technological groove or hole, and the winding is done in the direction opposite to the working rotation of the bobbin. Most reels have arrow marks on the outside of the body that indicate the direction of travel of the trimmer reel.

After winding, you need to leave a free end of 15-30 cm to enhance the centrifugal force, which is decisive when removing the trimmer line in automatic and semi-automatic spools. We pass the left end through the working hole of the coil and assemble the head.

Trimmer head with automatic line threading

Types of trimmer heads

Some models on the market have a reel with an automatic winding mechanism. It is enough for the owner to properly thread and fix the ends in the head, and the winding operation will be performed by the tool itself when it is turned on. It is almost impossible to wind the line incorrectly into a trimmer with such a head, since the coil independently determines the position of the antennae. The advantages of the automatic trimmer head include ease of threading the line, and the disadvantages of frequent breakdowns of the mechanism due to the complexity of the design and high cost.

How to change the line in the trimmer and which one is better to choose

Since we considered the choice of a trimmer in the previous article, today we will tell you how to properly fill the trimmer with fishing line, and which one is better to choose based on the working conditions.

After you bought a trimmer and began to actively use it, sooner or later the question of replacing the fishing line will arise, since this is the most wearing element in the tool, then intensive use of the trimmer will lead to frequent replacement of consumables.

What types of woods are there

The most common type of line, suitable for almost all types of round cord reels. This is an ordinary fishing line, suitable for cutting succulent grass, but it will be much more difficult to cut dead wood with it, and even more so it will not cope with shrubs.

As a rule, the diameter that can be used to cut young grass does not exceed 1.6 mm. The thicker the thread, the more coarse grass it is able to overcome.

There are fishing lines with sharp edges in the form of an asterisk or a square, this option is more adapted to mowing dry grass precisely due to the existing sharp edges, but its disadvantage is greater wear and is inferior in strength to a round cord.

There are fishing lines with improved aerodynamics with characteristic dents, scales and notches, such a product makes less noise, but it is used only on petrol cutters, since the exit of such a thread from the reel is difficult, it is used most often with discs into which segments are inserted. The disadvantage of such a product is its fragility.

Most often in gasoline trimmers with an engine with an output of more than 1.5 hp. Use cords with a metal cable inside.

This thread is ideal for cutting dry grass and small bushes. The presence of a core has a positive effect on the wear resistance of this material.

The disadvantage of such a cord is its price, which is significantly higher than the above listed opponents.

How to remove or tuck the line into the trimmer

It will take about 10-15 minutes to wind the line. What is a trimmer coil? Plastic body with a cassette inside, which has a special hook for easy winding of the fishing line.

Almost all trimmer reels have a similar fastening principle, this is a central screw-button, when pressed, it becomes possible to pull out the line of the required length. Below are a few examples of different trimmer spools.

The bobbins of the trimmers, the motor of which is located near the ground, have a different attachment to the axis of rotation, they have two buttons on the spool located on the sides that need to be wrung out, otherwise the replacement of the thread is no different from other cassettes.

The principle of correct winding of the fishing line is similar in all of the above cases, therefore, for example, consider the standard version with two antennae.

To remove the spool with the fishing line, you need to unscrew the screw located in the center, but note that the thread is left there, so you have to turn it clockwise, this was done on purpose so that during operation it does not open under the influence of centrifugal force.

Next, using a screwdriver, disassemble the head and remove the spool onto which the fishing line is directly wound.

Having measured the required length and folded in half, you need to tuck the fishing line into the reel, eventually bringing its ends opposite each other (for this there are special slots for fixing).

After that, it is necessary to assemble the head in the reverse order, threading the ends of the cord into two corresponding holes.

If you have doubts or it is not entirely clear how to load the line on the trimmer, we recommend that you look at: how to properly wind the line into the petrol cutter.

In this video, step by step, the instructor will open the trimmer head, measure the required amount of line, usually from two to four meters, and demonstrate the assembly and installation on the trimmer.

How to quickly and easily remove the coil with your own hands

Remove the head before replacing the old line with a new one in the detachable trimmer reel.

The process is completely simple, even beginners can do the job:

Remove the upper retaining cover.
Take out the removable spool.
Take out the spring, if any.
Unscrew the bolt with a screwdriver.
Remove the housing from the shaft.

How to wind the line correctly: replacement features depending on the type of removable trimmer coil

To figure out how to thread the line into the detachable trimmer head, the following guidelines and instructions will help.

What are the trimmers and features of their use

The trimmer is useful for trimming small or difficult areas, such as near hedges, between beds and along paths. Today, manufacturers produce a wide variety of gasoline, electric and battery models, which can be selected for any owner’s request.

A fishing line is used as a cutting element of the trimmer. In the process of work, sooner or later, its length will end, and then the owner will have a question of how to correctly replace and fix the thread tucked into a removable coil.

Auto feed trimmer: how to wind the line into the removable spool

In some models of trimmers, a reel is installed, the line in which is refilled automatically. It is enough for the owner to fix the ends in the head, after turning on the equipment, the mechanism will perform all the winding manipulations on its own.

How to wind the line around the reel of the double barb trimmer

You can look before work, and also take into account the following recommendations.

If there is only one track, both threads are wound in parallel.
If there are two tracks, each section is wound in a separate groove.
Wind the threads in the opposite direction to the rotation of the head.
The length of the free ends should not exceed fifteen centimeters.
Thread the ends through the outlet holes.
Assemble the head and check the trimmer performance.

How to wind the line correctly on the spool of a single-barbed trimmer

Most often, a thread up to five meters long is used. The procedure consists of the following steps:

Bend the cord with a loop and insert into the groove of the head.
Wind the thread in the opposite direction to the marks on the body. They indicate the direction of movement of the head.
Leave the end of the thread up to fifteen centimeters long to increase the centrifugal force.
Thread the free end through the spool outlet.
Assemble the trimmer head.

Sources: