Trimmer for stihl grass how to unscrew the lid. Method 1 – how to correct the fishing line for a trimmer…

Trimmer for STIHL FS 38 grass how to refuel a fishing line for a trimmer. Antirun.Ru

How to refuel a fishing line for a trimmer to a trimmer coil for grass? Video Instructions Warranty production of the factory refueling of a trimmer for the grass will be in demand for fishing line substitutions. Having a very approximate idea of ​​how to tuck a fishing line for a trimmer to the coil of a trimmer for grass without the help of others, the new ones without hunting take up this matter. How to wrap a fishing line for a trimmer to a trimmer coil for the grass, how to season a fishing line for a trimmer to a trimmer coil for grass. Autocut for a trimmer for STIHL FS 55 grass refueling the fishing line in a trimmer coil for grass 2 part winding of the fishing line on. But with some abilities, the development of this simple science does not represent any difficulties, and the similar annotation presented below will greatly facilitate this process.

The assortment of the company’s braids is diverse. The company constantly increases the efficiency of using its products.Consider the main features of the popular options for mowers of the presented company.

The cord spontaneously lengthens

There are situations when a user of a trimmer for grass notices a very fast fishing line consumption. At the same time, he never hit the ground with a button to lengthen the fishing line. The reason that the fishing line for a trimmer spontaneously lengthens, cutting off a special knife on the casing of the device, may be the absence of a spring in a mowing head. Often beginner users of mowers, trying to charge a fishing line for a trimmer into a coil, forget to install a clamping spring in the head, or completely lose it when opening the lid, and in the future, they do not even suspect its existence.

Also, a fishing line for a trimmer can lengthen without using a button if the spring is weakened. If the spring check confirmed this fact, then it is necessary to put several goals under it to strengthen its clamping properties.

Preliminary preparation

First, for winding the fishing line, it is necessary to remove the coil (bobbin, spool) from the trimmer for the grass. certain acts will depend on the difficulty of configuration and the type of product itself:

• Small electronic trimmers for grass with a working location of the motor and coils at the bottom, usually have side buttons on both sides of the bobbin. With the simultaneous press on their highest part of the coil, coupled with the internal contents for winding the fishing line is disconnected, while the lower one remains on the trimmer. The analysis of the bobbin is better to create in an even smooth place, so that the spring does not jump out and not be lost;
• Electronic and gasoline trimmers for grass with a curved rod without the ability to install a knife, usually have coils with a special lamb: in similar structures, you should with one hand with one hand to hold the rogue in a motionless position, and the other counterclockwise twist the fixing bobbin on the staging barack. How to refuel a fishing line for a trimmer trimmer for grass? How to refuel a fishing line for a trimmer to a trimmer coil for grass. It is clear how to charge a fishing line for a trimmer for a trimmer for grass. After disconnecting the nut, the whole bobin is removed.
• Electronic and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and with unhurried rotation, such mutual placement is achieved when the screwdriver enters the holes and the bobin is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

For the second and third options of coil, depending on the design, are versed in different methods. In the bobbins with a lamb, lamb is twisted, in the reels with the latches, the fixers are pressed and one part of the coil is freed from the other. How to refuel a fishing line for a trimmer in how it is a correct cheap fishing line for a trimmer. 2. On your site. If the halves of the spool are connected by thread, then they are quite turned with their hands in the back sides until they are completely developed.

How to wind a fishing line for a trimmer for an electric trimmer for STIHL grass

The last criterion to pay attention to. The composition of the equipment for a trimmer for grass. Motokos coils are made of plastic.

How to insert a fishing line for a trimmer into an electric trimmer for grass, mower.

But the fishing line for the trimmer can be made of a wide variety of materials. How to wind a fishing line for a trimmer for a trimmer for use for use price in grass using fishing line. Among them it is worth noting nylon. How to replace a fishing line for a trimmer with a trimmer for the STIHL FS 55 grass in the lubrication of a trimmer bearing for the STIHL FS 38 grass. The fishing line for a trimmer made of this material has high wear resistance, is able to withstand large temperature changes and increased loads. In addition, with prolonged storage, nylon does not relax and does not lose its operational qualities. All this directly affects the term of the fishing line.

I continue to experiment with a fishing line for a trimmer for grass. Today on tests: 1. Wire for knitting reinforcement in one layer 2. Wire for knitting reinforcement in two layers 3. Soft hacksaw clips 4. The solution is found. Does not bend, does not break. works. Look, subscribe. But don’t try to repeat it at home. This video, first of all, urges to think.

In general, in my video, I talk about construction at one helmet. I do everything myself. One head and 2 hands. The main directions are construction and repair with your own hands, but I also talk about the garden and garden, crafts and useful things for the house.

Interesting #13 House from SIP and heaving soils: https: // www.YouTube.COM/Watch?v = oe40fiijce0 #89 Winter water supply in the bath: https: // wwww.YouTube.COM/Watch?V = xEFDWRIA2O #88 WEAR CONTOR FROM SIP. Experiment: https: // www.YouTube.COM/Watch?v = u70zgwidamo #85 mice in the house from SIP: https: // www.YouTube.COM/Watch?v = m_3bsnhv0xc #84 Ventilation in a private house: https: // wwww.YouTube.COM/Watch?v = tnddwz9uqf8 #63 leaks of heated towel rails. Which heated towel rail to choose?: https: // www.YouTube.COM/Watch?V = O8YLQXKONLQ

At the moment, I am actively engaged in the decoration and arrangement of my house from SIP panels, which is located in the region.

I record all the stages of construction on the video, sharing my experience and my thoughts. Almost all work I do the first time.

I do everything for my pleasure, which I wish you!

Many users of mowers, both electric and gasoline engines, some time after using the purchased fishing line are asked: and how to replace it? If you exclude dangerous options (chain from a chainsaw, canvas from a hacksaw, wire, cable, string, etc.D.), which can cause severe injuries to the user and others, then a home.made fishing line for a trimmer from a plastic bottle is considered the best way out of the situation.

Fishing line for a trimmer for grass

The main aspect of a fishing line for a trimmer for grass is its diameter. How to make a trimmer for grass with your own hands from a corner grinder, (starter). As in the next figure. It can be 3.2, 3, 2.4, 2 or 1.6 mm. How to do it with and how to replace a fishing line for a trimmer. Horror story on an eternal theme. The thicker the fishing line is for a trimmer, the more thick plants can be mowed with motorcycles. popular and all.fought fishing diameter. 2 mm.

The thickness of the fishing line must meet the power of the engine of the trimmer for grass and approach the parameters to your model Motokos. For a low power unit, a fishing line diameter is 1.3-1.6 mm, and for a device designed to work with soft and hard vegetation. 1.8-2 mm.

If you do not know which diameter to choose, before purchasing, read the product passport. There the manufacturer indicates the optimal value of the diameter of the fishing line.

We save fishing line for a trimmer trimmer for grass! Super way!

Also look how easily you can make a spider for a fishing line of a trimmer for grass: a measured container

However, the option of acquiring fishing line per cut is also possible. Eternal “, because on a fishing line for a trimmer 1, you make a good trimmer for grass. It is suitable for those who use a braid infrequently, only for domestic purposes.

How to cut a bottle into a tape

Before proceeding with the manufacture of a home.made cord, you will need to prepare the material itself, namely the plastic tape of the required width and length. To dissolve the PET bottle on the tape, use various devices, the manufacturing algorithm of which can be found on the Internet. If you are going to mow large areas overgrown with grass, and you will need a lot of home-made cord, then, of course, it makes sense to make a more complex bottlecore from the corner or U-shaped aluminum profile. The process of manufacturing a bottle.cutter is shown in this video.

But if you are not interested in the mass production of a plastic tape, then from time to time to dissolve the bottle on the strips in a simple way.

Thus, the entire plastic container will blossom into the tape of the same width.

A version of a bottle.cutter, which you will always have at hand, can be made from a conventional sharpener for pencils, preferably made of aluminum. In detail how to make it, shown in this video.

Eternal fishing line for a trimmer for a lawn mower weight 410 grams, take the addition to the video https: // YouTu.BE/8VXQK2YFD3C

Imbalance, word symmetry speaks about something? the plates are the same, the holes on equal removal friend

Modifications of coils for a trimmer for grass

Coils (heads) for a trimmer for grass can be of various modifications. We fill out a fishing line for a trimmer trimmer for grass. On the example of a trimmer for the grass Makita UM 4030. How to refuel a fishing line for a trimmer trimmer for grass. To trim the lawn, one.built (with one thread of fishing line), and for clearing territories and mowing grass. Two.stringed, with manual adjustment of the length of the string or automatic supply of fishing line.

Modern manufacturers are increasingly producing universal motorcycles with two.stringed automatic coils.

Eternal fishing line for a trimmer for a trimmer for grass

Trimmer fishing line and a trimmer for grass: how to make the right choice

• If instead of a special cutting element, say fishing line, install a metal cable, then your trimmer for grass can “turn” into a real dangerous weapon not only for you and your eyes, but also for all people around you nearby. This is due to the fact that during the work of the trimmer for the grass, the steel cable will constantly work, which will lead to confusion, and its small pieces can fly to all sides with a huge speed.
• The same can happen if a copper wire is used instead of a steel cable, but in this case, the pieces of separation from copper wire will be slightly larger and may give you an even greater injury. And if God forbid, accidentally catch such a cutting element by the leg, then after that 100% is guaranteed a deep cut of soft tissues, and in some cases, all this can lead to amputation of small limbs (fingers) of the legs and even hands. Therefore, our advice to you, do not use any other cutting elements, except for fishing line, for your own safety and others.

How to wind a fishing line for a trimmer coil for a trimmer for STIHL grass

When spring comes, people often spend their free time in a summer cottage. They try to save their site from such a problem as weeds and grass with the onset of warm days. It is difficult to do this manually, especially if the territory is very large, so the lawn mower will help. Thanks to this technique, you can trim the grass and remove weeds. this is a suitable device to mow unnecessary plants near the fence, at home, between rows in the garden on a flower bed and so on. About how to choose a lawn mower, which is suitable for your needs, read here. The cutting element in this device is a fishing line for a trimmer (strong polyethylene thread), which is wound on a special element. a reel. But over time, the fishing line for the trimmer wears out and there is a need to replace it. The article will talk about how to refuel a fishing line for a trimmer to a lawn mower.

Which fishing line for a trimmer to choose to refuel a lawn mower

The thickness of the polyethylene thread depends on the model of the technique and varies from 1.2 to 4 mm. She may be:

• With a round section. this is the most durable material for mowing herbaceous plants;
• with curly section. used to mow soft plants;
• twisted. used for thin grass;
• professional type, is not suitable for all models of technology.

To change the fishing line for a trimmer on a lawn mower, it is necessary to purchase a cutting thread that will be ideal for a particular type of mower.

You can soak the thread in a basin of water for several minutes to increase elasticity and strength.

Instructions

In order to change the fishing line for the trimmer, you need to remove the old one (if it was). Coil. This is part of the design of a trimmer for grass, which is placed in the snuts of the head of the motorcosa, drum or bobbin. Depending on the manufacturers of the head can be different. But this article discusses only Patriot, although their mechanism is used by many other companies.

Annotation on how to promote a hand head on a trimmer for the grass described below.

• At first, it is necessary to clean the head of the dirt and sticking weed if it is pollution. To do this, you need to raise a motorcycle head upward and, holding the casing, remove a special protective lid dressed on the drum.
• The next step needs to extract the reel from the drum. The coil is simply removed even by one hand, since the drum is not fixed in any way.
• The drum itself is fixed in trimmers for grass with a bolt. This bolt needs to be unscrewed, after that you can easily remove the drum. To do this carefully, you should support the drum with a coil, at the same time twist the screw counterclockwise.
• Now you can pull the coil out. As mentioned above, it is not fixed by anything, not counting the hook with an iron shaft, so it does not need to be torn off with force. Neatly, radial movements should be removed from the drum.
• Now it remains to extract an old fishing line for a trimmer and follow subsequent instructions.

Installation of the coil and drum in its former place is carried out according to the revival method.

Before the process of refueling the fishing line, it is worth making sure that the thread suitable for a trimmer was bought. In this case, when the thread is not suitable, the fuel or energy consumption increases, the load on the motor motorcycle engine.

In order to change specifically the thread itself, you need to prepare a cut of the desired size. In most cases, this requires about 4 m fishing. A certain figure will depend on the characteristics of whining, for example, its thickness, also on the characteristics of the coil itself. If it does not come out exactly to find the length, you can do in the subsequent way: stick and wind the thread to such a state that the coil is one hundred percent charged (the level of the fishing line can be compared to be in the sides of the coil). You need to ensure that the fishing line for the trimmer sits in the coil exactly.

Annotation for refueling the fishing line in the coil is described below.

• The prepared thread must be taken and turned in half. It should be seen that one edge is longer than the other by 0.1-0.15 m.
• Now you need to take the ends in various hands. The one that is smaller needs to be pulled to more, so that it becomes 2 times shorter. When bending, the indentation should be maintained at 0.15.
• Find the cut of the snuffle septum coil. Gently carefully take the loop that came out earlier in this slot.
• To continue the work, you need to find the direction of winding the thread in the coil. To do this, just look around the coil. There should be an arrow on it.
• If the arrow-index could not be found, then it may be completely that there is a written designation. An example is given in the photo below. You need to look at the head of the coil. It has a direction indicator. But this is the direction of the coil movement. To get the direction of winding, it is necessary to wind in the back.
• Now you need to season the coil with a fishing line. It is worth attention that there are special guide grooves. When cheating, you need to follow these grooves, otherwise you can destroy a trimmer for the grass. At this step, it is necessary to charge the coil very closely.
• When the user is screwed up almost the entire thread, you should take a small end (you should not forget about the protrusion of 0.15) and stretch it into the hole located in the wall of the coil. Now it is necessary to repeat this action similarly to another end (on the other hand).
• Put the coil in the head of the coil, before that, extinguishing a fishing line for a trimmer through the holes of the snout of the drum.
• Now is the time to return the drum to your place. Then you need to take it with 2 hands by the ends of the fishing line and pull them to the sides. Then you need to put the lid in place (here you can safely have an effort until the corresponding click is heard).
• Remained to perform “cosmetic work”. You need to look at whether the thread came out very long. You can have a trimmer for the grass and check in practice whether everything is comfortable. If the thread came out little long, you can cut it with scissors.

Read what work is carried out after running a trimmer for grass

STIHL FS 38 Lawn Mushroom how to refuel a fishing line for a trimmer

STIHL produces a different cutting tool with gasoline and electronic engines: chainsaws and saws of special destiny, motorcycles, electronic braids for grass, blacksmiths, lawn mowers, and of course a drilling tool, washing, sprayers and other equipment. The company was founded in Germany and currently has consulates in 160 countries.

STIHL lawn mower will like different capacities and purposes more: from a light trimmer for grass to trim the lawn to a large massive professional tool. Next, several favorite models of the stihl gas station will be considered.

STIHL FS 38 light lawn mower of type “Portable trimmer for grass” is suitable for leaving lawns and mowing grass in small territories.

• Power. 0.9 liters. With.,
• Motor volume. 27.2.7 cubic meters. cm,
• The engine is two.stroke,
• mass. 4.1 kg,
• tank size. 0.33 l,
• Working part-Autocut C5-2 head,
• Showing width. 255 mm,
• Light starting system,
• Primer.

The rod is curved, there is also a D-shaped handle, which is simply regulated and installed in a rational position. Included. glasses.

The Stihl FS 55 lawn mower is normally suitable for household tasks in the suburban area: mowing of grass around trees, trimming lawns, battles with snowballs with weeds. She can mow old hard grass, nettle, reeds, thin bushes.

• Power Stihl FS 55. 1 liter.With.
• Motor volume. 27.4.5 cubic meter. cm,
• The engine is two.stroke,
• Weight. 5 kg,
• tank size. 0.33 l,
• working parts. a knife, a fishing line for a trimmer,
• Processing width. 420 mm for fishing line and 255 for a knife,
• Primer pumping fuel in a carburetor, for brisk launch after downtime.

How to correctly change #cord (fishing line for a trimmer) on a trimmer \

The kit includes a belt for two shoulders, glasses to protect the operator’s eyes. The bar is flat, the bicycle handle and is adjustable using the screw.

The STIIHL FS 130 lawn mower is armed with a 4-stroke 1.9-horsepower STIHL 4-MIX engine with a 36.3 cm working volume, which of course is refined by the consistency of gasoline and oil, as well as two-stroke engines. Such an engine emits less harmful substances into the atmosphere than two.stroke, with all this, it provides a low level of noise. Air filter with a long.term cardboard filter element does not ask for often service.

The weight of the device is 5.9 kg, the mowing is carried out by fishing line in other words by a knife. The width of the clock with a knife is 23 cm, fishing line. 41 cm. The Stihl FS 130 lawn mower has a straight bar and a “bicycle” handle, which simply turn to a right angle for storage and adjust in height, for this purpose it is necessary to unscrew the central screw. The kit includes a double shoulder belt and eyes to protect the eyes.

The Stihl FS 250 lawn mower is a powerful device of the semi.professional class, suitable for mowing dry and hard grass, large thickets, also cooles with shrubs and small trees.

• Power. 1.6 kW
• Motor volume. 40.3.2 cubic meters. cm,
• 2-stroke motor,
• mass. 6.3 kg,
• tank size. 0.64 liters,
• Tool. a knife that rolls grass for 255 mm, there is an option to install a head from 2.7 strings,
• Elastostart system for easy start,
• The primer for pumping fuel to the carburetor allows you to rapidly start the lawn mower even after a long downtime.

Stihl FS-38 common disease

The shoulder belt and glasses for protecting the eyes are included, the removable “bicycle pen”, which can be turned parallel to the storage rod, the bar is flat. The handle adjustment in height is carried out without additional tools, quite unscrew the screw. Our client remains nearby. on the handle.

As the main advantage of the Stihl FS 250 gas station, users mark the highest power and its ability to mow actually anything. Of the minuses, they call an awkward pendant ear, a large fishing line and strong vibration.

Range gasoline braid for the STIHL FR 131 T grass is a professional tool suitable for work in inaccessible areas and in places where the relief is complex. The shoulder belt simplifies the wearing of the apparatus, in the fulfillment of a long one, and greatly simplifies the work, because the tool itself is quite heavy. 9.6 kg.

• 4-stroke engine 4-mix,
• Power. 1.4 kW
• Motor volume. 36.3 cm3,
• Fuel tank. 0.71 l,
• Cutting element. a metal knife with a diane of 230 mm,
• Of course the primer,
• Ergostart lightweight launch system,
• Cardboard filter,
• Automatic decompression system,
• Anti.Vibration system,
• The radial handle allows you to mow in inaccessible and crowded places.
• Thanks to the collapsible rod in disassembled form, the Stihl FR 131 T lawn mower simply fits in a storage bag.

STIHL also produces electronic and batteries for grass, accessories and cutting tools for the current situation, personal protective equipment.

Motokos lure their own mobility. they are independent of the outlet, they are taken on their own even where there is no electricity, although this type also has its difficulties in shortcomings. In the middle of the stihl gas station, you can easily and simply find a suitable model for different tasks.

Removing the handle

Direct disassembly of the STIHL 180, begins with the removal of the handle, which is attached to the chainsaw housing using three rubber shock absorbers. To remove, it is necessary to remove the plastic plugs from the inner cavity of shock absorbers, after which with the help of a powerful screwdriver, squeeze the upper shock absorber first, then the one which is closer to the posterior handle.

A gas trigger is installed in the back of the handle, which is connected to the carburetor through the wire traction in order to disconnect the thrust from the gas trigger, it is necessary to unwind two screws and disassemble the handle.

When the handle remains on one shock absorber, it is necessary to turn the chainsaw housing from the inside of the handle and breaking to the side, remove the case from the last elastic band.

How to refuel a fishing line for a trimmer to a trimmer coil for STIHL grass

How to refuel a fishing line for a trimmer to a trimmer coil for grass? Video instruction

Warranty production of the factory refueling of a trimmer for the grass will be in demand for fishing line substitutions. Having a very approximate idea of ​​how to tuck a fishing line for a trimmer to the coil of a trimmer for grass without the help of others, the new ones without hunting take up this matter. How to wrap a fishing line for a trimmer to a trimmer coil for the grass, how to season a fishing line for a trimmer to a trimmer coil for grass. Autocut for a trimmer for STIHL FS 55 grass refueling the fishing line in a trimmer coil for grass 2 part winding of the fishing line on. But with some abilities, the development of this simple science does not represent any difficulties, and the similar annotation presented below will greatly facilitate this process.

How to lubricate a trimmer gearbox for grass / Gearbox gearbox / Reducer Motokosa

Lubricate a trimmer gearbox for the grass at least once a year, but it is better to inspect the lubricant after every 20-25 hours of work or when the gear noise in the motorcade gearbox appears. How to lubricate the gearbox gearboxes. For lubrication, at first you need to clean the cork itself and the place around the traffic jam and the remnants of the grass, so that they do not fall inside the gearbox when filling it with grease. Then you need to turn out the cork for the lubrication of the gearbox (for example, the Echo lawn mower is a key for “17”, in Husqvarna-a 6-garnet on “5”, for Chinese lawn mower-the key on “12”). It is better to use the same manufacturer as your trimmer for grass or just from world-famous brands, such as Oleo-Mac, Stihl, Husqvarna, Oregon, Liquimoly, Litol-24, Azmol 158 and T.D., If only it was not a fake! The tube, if new, print, removing with your fingers a cork or piercing the cover with the back of the lid in the nose of the tube. Then we put a trimmer for the grass on the left side, and rotating the knife with one hand (so that the gears are smashed and the entire volume is filled), squeeze the lubricant from the tube with the 2nd hand through the hole inside the gearbox before its full filling. Then we twist and clamp the trimmer gearbox for the grass and a tube plug with a lubricant. If the lubricant is not in the tube (and, for example, in the jar), take a honey syringe without a needle, take out the piston, fill the lubricant (with your finger) in the syringe, and then fill the gearbox of the trimmer for the grass from the syringe from the syringe.

First of all, to wind the fishing line, it is required to remove the coil (bobbin, spool) from the trimmer for the grass. specific actions will depend on the complexity of the configuration and the type of product itself:

• Small electric trimmers for grass with a working location of the engine and coils in the lower part, as a rule, have side keys on both sides of the bobbin. With the simultaneous press on them, the upper part of the coil, along with the internal contents for winding the fishing line, is disconnected, while the lower remains on the trimmer. It is advisable to analyze the bobbing in an even smooth place, so that the spring does not jump out and not be lost;
• Electric and gasoline trimmers for grass with a curved rod without the ability to install a knife, as a rule, have coils with a special lamb: in such structures, you should hold the spool in a fixed position with one hand, and rotate the fixing bobbin on the bar with a barack’s baracks. After disconnecting the nut, the whole bobin is removed.
• Electric and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and, with slow rotation, such a mutual arrangement is achieved when the screwdriver enters the hole and the bob is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

For the second and third cases, the coil, depending on the design, are versed in various ways. In the bobbins with a lamb, lamb is twisted, in the reels with latches, latches-fixers are pressed and one part of the coil is freed from the other. If the halves of the spool are connected by thread, then it is enough to turn them with your hands in the opposite directions until they are completely developed.

The nozzle of the cutting block

The cutting block is the main component of the Philips styler. He has short and sharp edges, and it is used to quickly and accurately trim the hair in length.

To remove the cutting block from the styler case, check the presence of the disconnection button on the styler case. If it is present, click the cutting block removal button.

If there is no disconnection button on the Stayler, place your finger under the teeth of the cutting block and put it out of the device. For re.installation, insert the lower part of the cutting unit into the styler case, and then push the part with the teeth to the click. Do not make excessive efforts; This can lead to damage to the device.

If you fail to install the cutting block, check the presence of foreign bodies in the styler case and try to clean it with a small brush or cotton wool.

No matter how well it works in a summer cottage or a country house that we have acquired an electric trimmer for grass. Sooner or later, the time will come when we need to get a head.up.trimmer for replacement or prevention. I will immediately make a reservation to replace the fishing line with a trimmer head completely do not need to remove. As part of this article, I will tell you how to completely remove or replace the mowing head on the example of an electric trimmer for BlackDecker GL716 grass.

Trammers for grass professional and light

It is sometimes impossible to make a choice in favor of a device without elementary information on the main technical parameters of equipment that interested the user.

It will be advisable to compare these two categories of devices, choosing two from a number of models, on an example of which you can trace all their similarities and differences. The most popular model from the group of low.power gasoline trimmers STIHL is FS 55.

The devices that are popular due to optimal power and performance and used for processing large areas include FS 250. The main differences characterizing these two units are laid down in the constructive features of the engines.

So, in a household trimmer for grass FS 55, an improved type 2 MIX, which ensures a decrease in harmful exhausts and increases the efficiency of fuel consumption, is equipped with a direct drive shaft. The engine is working on the oil bosinzin mixture.

The engine power of this model is 1 liter. With., and volume. 27 cubic meters. cm, which allows you to successfully use it not only in the garden, but also on small lawns.

The duration of the average working session of this device is 2-3 hours of work in an area of ​​up to 6 acres.

This is also facilitated by a tank for fuel with a volume of 0.33 liters.

The FS 250 device is equipped with a 2.15 liter with the previous model with a gasoline two.stroke 2 MIX engine. With. and with a volume of 40 cubic meters. cm.

The hard shaft and the piston group persistent to wear and significant loads allow the use of the unit in territories with an area of ​​up to 20-25 acres for 6 hours of continuous operation.

Fuel container contains 0.64 l of fuel. The trimmer for the grass copes with advanced vegetation in any climatic conditions.

Most often, equipment of this type is trusted by complex communal work on the improvement of the territories of city parks and forest parking zones.

The similarity of the engines of these models is the presence of a smooth starting system Elastostart. This allows you to minimize uncomfortable jerk.shaped movements at starting, loading the muscles of the hands and back of the user.

The presence of the fuel pump for the trimmers in question provides the ability to pump fuel to the carburetor manually, which greatly facilitates the launch of the engine after a long break in operation.

The ergostrat mechanism, which is equipped with the FS 55 model, is responsible for the light and quick start of the engine thanks to the spiral spring in the design of the starting device.

The FS 250 unit is equipped with an anti.vibrational STIHL system, using special rubber linings of the extinguishing harsh shocks and fluctuations that occur during operation.

Due to this, the high efficiency of the operator’s long.term work is achieved without the sensations of fatigue and stress. Also, the structural features of the described trimmer for a professional class grass include a special regulatory authority. a compensator.

It prevents the saturation of the fuel mixture when filter pollution by harmful substances, providing a long.term period of operation. The surface of the filter surface is required to reach the level of pollution in 80 %.

Both of the under consideration trimmers are not inferior to each other in terms of convenience of use. The multifunctional handle present in the models is equipped with all the necessary controls, which gives the operation an operational and effective move.

Attention! The handle here is T-shaped, double, providing maximum maneuverability and adjustability. It is this type of handle that is optimal for frequent mowing of grass in vast territories

Equipment component by practical shoulder diluted belts with soft pads allows the operator to work for a long time without fatigue. These belts are also equipped with a convenient carrying system.

If necessary, it is possible to use portable belts with a tool bag and the mechanism of quick removal and fixing the trimmer for grass. All STIHL technique is necessarily equipped with special glasses that ensure the safety of the operator during operation.

The described trimmers for the grass are close and in their overall indicators. So, the STIHL FS 55 model has a length of 172 cm without equipment, and the FS 250 device is 177 cm. Without tools, the weight of a light model is 5 kg, professional. 6.3 kg.

Both units have a straight bar, cutting head Autocut 25-2, the ability to equip a GSB 230-2 with a two-blade knife and fishing line. The width of the herbs mowing is, respectively, 30 and 45 cm.

Trimmer coil device for grass

Cassyle heads for trimmers come in different designs. both simple and complex. The figure below shows a semi.automatic trimmer head from the Husqvarna motorcycle (Husqvarna).

This type of head is present in the configuration of most benzocosyles and electrimmers such as Stihl (Stihl), Patriot (Patriot), Champion (Champion), Bosch (Bosch), Huter (Huter) and others. The device of the braid head is quite simple. It includes the following details:

• the base of the mowing head;
• button for semi.automatic supply of the cord;
• Spulk (coil), into which a fishing line for a trimmer is refuel;
• spring;
• eyes. through them a fishing line for a trimmer goes outside;
• trimmer head cover;
• Trimmer fishing line (cord).

Removing the flywheel

The flywheel of the Stihl 180 chainsaw is twisted with great effort, so to remove it, you will need a head with a metal gorge. The nut holding the flywheel is unscrewed by the head by 13.

To block the crankshaft from turning, you need to unscrew the candle and install the piston lock through the candle hole, if not, you can use the old lace from the starter, with nodes imposed on it and immersed in the cylinder through the candle hole.

It is strictly forbidden to hold the flywheel from turning by installing between its ribs and the body of the power screwdriver and other tools, with this method of blocking from turning, the flywheel blades are not able to withstand the loads and break off.

Repair trimmer for STIHL grass with STIHL FS 38

When operating the stihl benzotrimmer

Sometimes a cutting head breaks, it happens that a cable breaks.Repair.

After the piston in the cylinder is blocked, you can unscrew the nut of the flywheel. The thread in the nut is common, so you need to twist to the left side. Having loosened the nut, it is not necessary to remove it to the end, it is enough to twist it until the moment when its upper edge is equal to the tip of the shaft, after which the gap made of soft metal is installed on the nut and a sharp blow is made on it. Thus, the flywheel from a sharp blow jumps off the shaft and can easily be removed without the help of additional tools.

Adjustment and repair of the carburetor of the lawn mower

The trimmer for grass does not apply to complex household appliances, because most of its breakdowns are mechanical and are quite successfully eliminated with their own hands. Even if the motor refuses for severe reasons. damage to the piston ring, for example, the repair is reduced to the substitution of the part.

And with a relative design, such a device of the device as a carburetor needs to be adjusted.

Motokosa carburetor cleaning instructions: Fast method

Many people prefer to use a quick way to flush the carburetor of the lawn mower. This method is effective in the case when single malfunctions of the device are detected. Consider step by step how the process of disassembling and cleaning with your own hands occurs:

First you need to twist four fixing bolts from the primer.

After the carburetor is cleaned with compressed air, do not rush to put it on a motorcycle. Now you can check the serviceability of its functioning, or more precisely, how it pumps fuel. To do this, connect the hoses to the output fittings.

We lower the supply hose into the canister with gasoline, and download the primer.

If gasoline flows out of the return, then. work to clean the carburetor is completed successfully. Now you can install the part on the lawnical mower, and check the quality of the functioning of the tool. This is where the process of quickly cleaning the product is completed. In more detail, the entire cleaning procedure is presented in the video

We proceed to running the lawn mower

After starting, do not rush to immediately run the trimmer for the grass. Let the engine idle for 5 minutes. While heating is going on, adjust the air supply to the air damper with a lever so that the rogue with a fishing line or with a knife does not rotate. As soon as the tool warmed up, we completely open the air supply to the corresponding lever to the “ON” position and squeeze the gas trigger for 1/2 and hold the seconds of seconds 30. Then we drop the gas, let the trimmer work on xx 30.40 seconds. In this mode we continue 10 minutes 15. Then we mock and let it rest for 15 20 minutes.

Having cooled the lawn mower, we continue to run the engine according to the previous scheme. How to start Stihl, launch of the stihl chainsaw, how to properly start the Stihl 180 chainsaw first launch of the video Original chainsaw STIHL MS 180. Start a hot, a trimmer for grass should already be with an open air damper. Try not to hold the gas for a long time, since the movable details of the tool only rubbing each other. And do not let the engine work at idle for a long time as it can overheat.

The next stage is the run.in a gas reducer gearbox for grass. To do this, select a plot with soft young grass. Kosim 5 10 minutes with 1/2 2/3 from full gas. After we take a break for 20 25 minutes. Repeat the cycle 3 4 times.

In general, therapist for the lawn mowing according to the described algorithm is carried out until the fuel mixture in the tank is fully generated. After which the tool is ready for long.term work. In the process, follow the temperature regime of the gearbox and the motor. They should not overheat.

Possible breakdowns

Unfortunately, even competent and careful operation of high.quality gasoline lawn mowers does not completely exclude the risk of breakdowns. Consider the most common problems.

• The engine does not start. Perhaps the candle failed or the fuel does not enter the carburetor.
• Unstable work ICE at idle. One of the most common reasons in such situations is the wrong setting of the carburetor.
• The trimmer for the grass does not develop speed and does not provide sufficient power. Such phenomena are associated with the need to clean or replace the air filter, candles, as well as adjusting the carburetor and removal of soil in a muffler.
• Overheating of the engine, which can be caused by the use of low.quality fuel mixture.

Quite often, the owners of gasoline mowers have to face situations when they stall when pressed on gas. The most common reason in this case is the incorrect operation of the carburetor requiring adjustment. Most often this happens after a long.term storage of the device or as a result of its operation in difficult conditions.

When the gas is added, the fuel valve can be closed to the engine stop, which will need to be slightly weakened to resume the normal supply of gasoline. Often you have to face clogging of the cabin, that is, a check valve located in the fuel tank. Among other things, the reasons for the fact that the ICE of the trimmer for grass stalls, the cable sagging in the carburetor and stretching of the fuel hose can be sagging.

It must be remembered that timely maintenance, diagnosis and elimination of any malfunctions allows you to extend the service life of the Stihl lawn mower and reduce operating costs.