Trimmer Huter Get 600 How To Remove The Head

Trimmer Huter Get 600 How To Remove The Head

Model operating instructions

The above-described gasoline trimmer “Huter” should be used taking into account the safety rules, which are prescribed in the instructions. From them you will be able to learn that it is unacceptable to use the equipment for persons who are under the influence of alcohol or are physically tired. Before starting work, it is necessary to arm yourself with special protective equipment, among them appropriate clothing, goggles, mittens or gloves, a helmet and headphones should be distinguished. The equipment must not be used in the vicinity of flammable and explosive substances. This also applies to conditions under which high humidity remains.

A lawn is quite an attractive element of the site today. However, it will look good if you take care of it. To do this, water the area regularly, feed it with fertilizers and cut the grass weekly. If you neglect the last condition, then rather quickly the territory will turn into dense thickets.

Need a trimmer. The cost of spare parts for a trimmer

No matter how good the tool is, you may need spare parts for the Huter trimmer. Some of them will be discussed below. For example, a clutch drum with a housing will cost the consumer 860 rubles, while the clutch housing bolt costs only 5 rubles. A flexible shaft for a trimmer costs 600 rubles, but a container for preparing a fuel mixture will cost a symbolic amount. 50 rubles.

Reviews of electric trimmers brand GET 1200SL

If you want to buy the Huter electric trimmer, then you can pay attention to the model that was mentioned in the subheadings. Its cost is NOT so high and amounts to 5000 rubles. The equipment, according to buyers, can be used for treating a lawn in a personal plot, as well as treating small areas. You can use the tool to cut grass even in hard-to-reach places such as along a fence or under a bench.

The power of the unit is sufficient to perform tasks in everyday life and is 1.2 kW. The bar is collapsible, which, as buyers emphasize, simplifies not only storage, but also transportation. This example is an ideal solution for women and elderly people, because the equipment is lightweight. Weight is 4.5 kg.

Reviews of the main features and advantages of the model

  • Vibration damping system;
  • Structural strength;
  • Long service life;
  • The location of the controls on the handle;
  • Easy start.

The trimmer “Huter 1900” has a fairly impressive power, which is 1.9 kW. A knife or fishing line is used as a cutting element. The tank capacity is 0.7L and the line thickness is 2mm. Before purchasing this equipment, you should take into account that its weight is quite impressive. Many novice users claim this. Equipment weight is 7 kg.

Trimmer Repair: Carburetor Adjustment

The Huter trimmer repair can be done by you when you need to adjust the carburetor. But first, the equipment should be serviced, for this it is washed, as for the engine, and then the spark plugs are changed, eliminating minor defects. You will need to wash the foam filter element using warm soapy water. If the adjustment is carried out on a dirty filter, then after cleaning the fuel mixture will become leaner, which will lead to poor performance or engine damage. The next step is to install the trimmer head with the largest possible cord, its length should be standard.

The tool starts up, warms up for 10 minutes, and then the left and right needles are turned to the middle position and set between the twisted and off position. There will be three adjusting screws: bottom, left and right. The right one will regulate the richness of the mixture at low revs. It is important to find the maximum idle speed and return the right screw. Then this screw is turned clockwise. Idle speed control will be considered correct if a cold engine is idling and a hot engine is NOT too high. The Huter trimmer carburetor is correctly set if the engine accelerates smoothly and quickly.

Reviews of the main features and advantages of the model

  • Vibration damping system;
  • Structural strength;
  • Long service life;
  • The location of the controls on the handle;
  • Easy start.

The trimmer “Huter 1900″ has a fairly impressive power, which is 1.9 kW. A knife or fishing line is used as a cutting element. The tank capacity is 0.7L and the line thickness is 2mm. Before purchasing this equipment, you should take into account that its weight is quite impressive. Many novice users claim this. Equipment weight is 7 kg.

Model operating instructions

The above-described gasoline trimmer “Huter” should be used taking into account the safety rules, which are prescribed in the instructions. From them you will be able to learn that it is unacceptable to use the equipment for persons who are under the influence of alcohol or are physically tired. Before starting work, it is necessary to arm yourself with special protective equipment, among them appropriate clothing, goggles, mittens or gloves, a helmet and headphones should be distinguished. The equipment must not be used in the vicinity of flammable and explosive substances. This also applies to conditions under which high humidity remains.

Reviews of electric trimmers brand GET 1200SL

If you want to buy the Huter electric trimmer, then you can pay attention to the model that was mentioned in the subheadings. Its cost is NOT so high and amounts to 5000 rubles. The equipment, according to buyers, can be used for treating a lawn in a personal plot, as well as treating small areas. You can use the tool to cut grass even in hard-to-reach places such as along a fence or under a bench.

The power of the unit is sufficient to perform tasks in everyday life and is 1.2 kW. The bar is collapsible, which, as buyers emphasize, simplifies not only storage, but also transportation. This example is an ideal solution for women and elderly people, because the equipment is lightweight. Weight is 4.5 kg.

A lawn is quite an attractive element of the site today. However, it will look good if you take care of it. To do this, water the area regularly, feed it with fertilizers and cut the grass weekly. If you neglect the last condition, then rather quickly the territory will turn into dense thickets.

The cost of spare parts for a trimmer

No matter how good the tool is, you may need spare parts for the Huter trimmer. Some of them will be discussed below. For example, a clutch drum with a housing will cost the consumer 860 rubles, while the clutch housing bolt costs only 5 rubles. A flexible shaft for a trimmer costs 600 rubles, but a container for preparing a fuel mixture will cost a symbolic amount. 50 rubles.

Need a trimmer. Trimmer Repair: Carburetor Adjustment

The Huter trimmer repair can be done by you when you need to adjust the carburetor. But first, the equipment should be serviced, for this it is washed, as for the engine, and then the spark plugs are changed, eliminating minor defects. You will need to wash the foam filter element using warm soapy water. If the adjustment is carried out on a dirty filter, then after cleaning the fuel mixture will become leaner, which will lead to poor performance or engine damage. The next step is to install the trimmer head with the largest possible cord, its length should be standard.

The tool starts up, warms up for 10 minutes, and then the left and right needles are turned to the middle position and set between the twisted and off position. There will be three adjusting screws: bottom, left and right. The right one will regulate the richness of the mixture at low revs. It is important to find the maximum idle speed and return the right screw. Then this screw is turned clockwise. Idle speed control will be considered correct if a cold engine is idling and a hot engine is NOT too high. The Huter trimmer carburetor is correctly set if the engine accelerates smoothly and quickly.

Electric trimmer Huter GET-1000S. model package

The out-of-the-box utility mower features a robust and environmentally friendly motor, comfortable D-handle, wear-resistant aluminum gearbox, and a curved, collapsible boom.

This model is well suited for small areas where it can handle leveling lawns, lawns, trimming flower beds, and removing grass under benches and near trees.

Model parameters include:

  • Built-in motor power. 1 kW at 7600 rpm;
  • Possible coverage when mowing with a fishing line / knife. 35/23 cm;
  • Maximum sound impact. 85 dB;
  • Weight. 5 kg.

The engine of this trimmer is equipped with a 3-level factory protection against moisture, dust and overheating, which significantly extends its practical life.

Petrol trimmer Huter GGT-2500S. model parameters

This professional Huter lawn mower is one of the most powerful garden tools from the German manufacturer. The model successfully combines high build quality, maximum endurance, which, with relatively modest fuel consumption, makes it possible to use it for caring for large garden plots.

The basis of the lawn mowers is a gasoline 1-cylinder internal combustion engine with a cylinder volume of 51.7 cm3. The extended stroke range of the standard forged piston significantly increases the torque reserve, which makes the trimmer a reliable assistant in the fight against numerous large weeds.

The factory parameters of this professional mower include:

  • Built-in engine power. 3.3 HP C. At 9500 rpm;
  • Fuel tank. 0.7 l;
  • Possible coverage when mowing with a cord / knife. 43 / 25.5 cm;
  • Maximum sound impact. 96 dB;
  • Weight. 7 kg.

The basic trimmer includes a split bar that can be folded down for easy transport or storage.

Petrol trimmer Huter GGT-800T. description of lawn mowers

The advantages of this Huter household gardening tool include lightness, ease of maintenance and daily use, as well as high maneuverability compared to other models.

This Huter mower is well suited for small areas with many hard-to-reach areas. The upper position of the internal combustion engine improves the balance of the model, and the comfortable rubberized grip increases its maneuverability.

Mower factory parameters include:

  • Built-in engine power. 1 HP C. At 9500 rpm;
  • Fuel tank. 0.7 l;
  • Possible coverage when mowing with a fishing line / knife. 40 / 25.5 cm;
  • Maximum sound impact. 90 dB:
  • Weight. 6.5 kg.

This Huter lawn mower is equipped with a rubberized 2-hand grip, the right hand grip is equipped with a lock to protect the tool from being switched on unexpectedly.

Petrol trimmer Huter GGT-1500T. lawn mowers capabilities

This self-contained semi-professional Huter lawnmower stands out for its good selection of components, supplied with balancing, and also for its long service life. Due to this, the model successfully copes with mowing young and woody shrubs, as well as dense dry growth.

The basic trimmer equipment includes a 2-stroke proprietary internal combustion engine with a standard cylinder volume of 42.7 cm3. The manufacturer initially increased the piston stroke, which significantly increased the engine torque reserve.

The instrument’s factory parameters include:

  • Built-in engine power. 2 HP C. At 9500 rpm;
  • Fuel tank. 0.7 l;
  • Possible coverage when cutting with a fishing line / knife. 43 / 25.5 cm;
  • Maximum sound impact. 96 dB;
  • Weight. 6.9 kg.

To transmit the force generated by the engine, a rigid drive shaft is included in the equipment of the model, placed in a collapsible metal rod.

Electric trimmer Huter GET-1200SL. mower parameters

Among the advantages of this electric mower are high engine power, reliability and excellent factory build quality. The trimmer is equipped with a durable starting system, an all-metal aluminum gearbox, and protection against inadvertent activation.

The force generated by the engine is transmitted through a rigid drive shaft, protected from damage by a straight chrome-plated rod. Attached to the boom is a durable plastic handle that can be adjusted to suit operator preference.

Model parameters include:

  • Built-in motor power. 1.2 kW at 800 rpm;
  • Possible coverage when mowing with fishing line / knife. 42/23 cm;
  • Maximum sound impact. 90 dB;
  • Weight. 5.3 kg.

This Huter electric mower can be equipped with a plastic reel with line up to 2mm thick, as well as replaceable metal knives.

Petrol trimmer Huter GGT-1300S. model advantages

This popular household trimmer performs well on regular maintenance of 5 to 15 acres. The model is equipped with a high quality 1-cylinder petrol engine with a forged piston and a chrome-plated wear-resistant cylinder. In the production of GIS, proprietary technology was used, aimed at reducing fuel consumption without losses in engine power.

Torque force from the internal combustion engine to the gearbox is transmitted through a rigid drive shaft placed in a split metal rod. A 2-handed bicycle-style handle is attached to the bar that can be moved up or down. All buttons and switches necessary for operation are built into the right handle of the handle.

Mower specifications include:

  • Built-in engine power. 1.7 liters. C. At 9500 rpm;
  • Fuel tank. 0.7 l;
  • Possible coverage when cutting with a fishing line / knife. 43 / 25.5 cm;
  • Maximum sound impact. 96 dB;
  • Weight. 6.8 kg.

The Huter 1300 trimmer is equipped with a translucent fuel tank, which gives the operator the ability to constantly monitor the remaining fuel required for work.

Petrol trimmer Huter GGT-1900S. model characteristics

This lightweight semi-professional tool has its counterparts with an improved system for easier and smoother engine start, a modified muffler and an effective anti-vibration system. These factory options make garden tools easier to use and more resistant to increased wear.

The branded equipment of the lawn mowers consists of a proprietary 1-cylinder internal combustion engine, a rigid drive shaft, a straight collapsible rod, and an aluminum gearbox housed in a durable metal case. 2.Metal handle, protected from rust by chrome plating.

The main factory parameters of the mower include:

  • Built-in engine power. 2.5 liters. C. At 9500 rpm;
  • Fuel tank. 0.7 l;
  • Possible coverage when cutting with a fishing line / knife. 43 / 25.5 cm;
  • Maximum sound impact. 96 dB;
  • Weight. 7 kg.

All internal parts of this model are made of forged hardened metals, which increases their resistance to rust and high temperatures.

Trimmers Huter (Huter)

Electric and gasoline streamers from Huter successfully combine high efficiency on the site and minimum fuel consumption. When developing each trimmer, the manufacturer uses proprietary innovative technologies aimed at increasing the endurance and comfort during operation of the equipment. This makes the Huter garden tools one of the most high-tech on the market, and makes it possible to use them successfully in almost any working environment.

Foundation and development of the Huter company

The German company Huter is one of the world’s most famous brands producing high-quality household and garden equipment. The history of the brand begins in 1979. It was then that the first plant of the company began to operate in the German city of Nordhausen.

Since the launch of its production, the company has embarked on an active development and gradual implementation of its own technologies. As a result, by the 90s of the XX century, the brand managed to become one of the most popular world manufacturers of electrical equipment, as well as high-quality appliances for household and economic use.

Today, Huter is known largely for its electric and petrol trimmer. Garden tools of this brand are characterized by high productivity, low fuel and energy consumption, as well as ergonomics and a pleasant modern design. Ease of operation and maintenance makes it possible to start using Huter trimmers Not only for experienced gardeners, but also for novice gardeners.