What Oil to Add to a Lawnmower Trimmer
Internal combustion engines used in lawn mowers are two and four stroke. When changing engine oil in lawn mower engines, the question arises for the owners – which engine oil to fill in the lawn mower? Today we will analyze this issue in detail and start first with four-stroke engines.
Features of lawn mowers
The engine oil in the engine of the lawn mower is distributed using the crankshaft: scooped out of the crankcase and sprayed onto the parts. Due to this design, the viscosity of the lubricant must be sufficient to hold the oil film on the parts, at the same time it should not be too thick to interfere with the movement of the parts or form a hard crust.
On the other hand, lawn mowers operate mainly at positive ambient temperatures and the load on their engines is not as serious as that of automobile engines. Most often, lawnmowers do not need a “cold start” in the cold, which greatly reduces the life of the car engine and requires low-temperature lubrication properties.
The first refueling is designed to break in the engine – after five hours of operation, it is replaced, after which you can work on the new lubricant all season. In the future, the replacement is done according to the regulations after a certain number of hours, or it is drained at the end of the summer season and the next year they fill in a new one.
General recommendations for choosing lawn mower oil
Based on the above design features of engines, it is best to use a special oil for lawn mowers for lubrication, and it must meet the temperature conditions in which the unit will be used. The best option is a specialized lubricant of class SAE 30. It is used at temperatures above 5 degrees.
If the special is not available, then you can use automotive lubricants of the class:
- SAE 15W-40
- SAE 20W-50
These lubricants are also designed mainly for positive ambient temperatures and maximum values above 35 degrees.
By type of lubricating fluid – mineral and semi-synthetic are allowed. Fully synthetic will be too expensive. API performance level – SF, SG, SH, SJ and higher. For four-stroke engines of garden equipment, the label must bear the label “4T".
Recommendations for choosing oil of specific manufacturers
The manufacturers of lawn mowers must indicate in their instructions the type that is used in their equipment, as well as the frequency of oil changes, usually in engine hours. Typically, manufacturers indicate their branded lubricants and should be used if you want to maintain a warranty on the equipment. But often, manufacturers indicate the general characteristics of lubricants, and then similar lubricants can be selected from more widely available automotive oils.
The best for any engine is considered recommended by the manufacturer. World famous Shell Helix Ultra . Shell has been developing a new technology for producing synthetic oil from natural gas for 40 years. Pureplus technology has resulted in an improved base oil formulation. On its basis, with the addition of the necessary additives, the leading manufacturers recommended for their technology get.
Replacing two-stroke engine oil in a lawn mower
Video: What Oil to Add to a Lawnmower Trimmer
A two-stroke engine is usually mounted on trimmers (manual grass clippers). These devices have small dimensions and weight, so the number of parts in them is minimized. They do not have a separate oil tank and need to prepare a mixture of gasoline with oil. Here initiative is no longer appropriate – you need to use only the special for two-stroke engines and mix it with gasoline in the proportions indicated in the instruction manual for the trimmer.
We pay attention once again – markers “MUST be indicated on the canisters with oil for two-stroke engines”2T"!
The fuel mixture for two-stroke engines is prepared as follows:
- The exact amount of gasoline is poured into the canister (for example, for a trimmer of 5 liters),
- Then, using a dispenser, add oil (semi-synthetic – 100 milliliters)
- Close the lid mix well
The finished fuel mixture can be stored for no more than two weeks in a metal or polypropylene container.
Do not use plastic bottles for storage! Polyethylene dissolves in gasoline and then, getting into the combustion chamber, increases carbon deposits in the engine. During prolonged storage of the fuel mixture, it loses its properties due to chemical reactions. The risk is increased that the engine will not start on old fuel.
We hope our review has helped to answer the question of your concern – what kind of oil to fill in the lawn mower? Please share your experience on replacing motor oil in lawn mowers under the review in the comments below.
Everyone knows that the car engine requires special care, which will ensure a long and trouble-free life for the motor. The same rule applies to the gas mower engine: depending on whether you have a trimmer or a large four-wheel mower, you will encounter the problem of choosing an oil. So what are the basic requirements for oil for lawn mower engines?
How to choose a lawn mower oil?
As with any machine, there is a manual for the lawn mower, which not only describes the main characteristics of the tool, but also the rules for caring for it. So, in the instructions it will be written that for lawnmowers it is necessary to use only specialized oil. And some manufacturers even insist on using the same brand of oil as the mower itself.
In fact, this fact turns out to be just a marketing ploy of manufacturers, and both automobile and motorcycle engine oil for four-stroke engines can be suitable for a lawn mower. It is enough to simply observe the basic rules:
1. The oil should be mineral or semi-synthetic. A fully synthetic oil can burn the engine, so it is best not to use it at all. During operation of the lawnmower, a lot of sludge is formed on mineral oil, so we advise you to choose semi-synthetic oil. In addition, mineral oil is difficult to find today.
2. The viscosity of the oil must not exceed SAE 30 or 10w30, and the quality category vary between SE and SJ. A more viscous oil can disrupt the engine, however, it also applies to less viscous oil. All these indicators must be indicated on the package.
3. Choose the oil according to the temperature conditions. If you mow in cold weather, the viscosity of the oil may be higher than the above, but the next time you turn it on you will have to replace the oil with the right one.
In lawn mowers with four-stroke engines, oil is poured into a special crankcase and never mixed with gasoline, since the design of such a gas lawn mower does not imply a mix of oil and fuel. On the contrary, it can cause engine damage. It is enough to change the oil once a season, as usually the crankcase holds from 450 to 600 ml of oil – this is enough to handle large areas. However, do not be lazy to check the oil level before each use of the tool.
How is oil used in two-stroke engine lawn mowers?
As a rule, a two-stroke engine is mounted on trim tabs, and since their design does not imply the presence of extra parts, a separate oil tank is not provided. What to do in this case? Prepare the fuel mixture.
For two-stroke engine lawn mowers, the same rules apply as for their larger counterparts, with one exception — you need to buy oil for units with a two-stroke engine.
On each trimmer (or in the instructions for it), the proportions of mixing fuel and oil are indicated: from 1:32 to 1:35. This rule applies only to mineral oil! And since it’s quite difficult to find it now, and it can scare off the cost, semi-synthetic or even synthetic oil is most often used. Note that the mixing proportions in this case change, and become – 1:50. If in doubt, carefully examine the oil packaging; this data is usually indicated on it. You should focus on them. To prepare the mixture, it is enough to pour 100 ml of oil into five liters of gasoline, this should be enough for a whole season of regular beveling. If not, repeat the procedure.