Where there are highspeed lawn mowers. Cleaning the tool after work

How the mower should move when mowing grass?

The lawn mower simplifies and accelerates the process of cutting the lawn. Unlike manual braids, this tool effectively cuts excess vegetation at the same distance from the surface of the earth, leaving behind a neat, beautiful green cloth. When working with these equipment, it is important to remember its potential danger. Failure to comply with operating rules can cause the operator’s injury, and the lack of competent maintenance leads to premature wear of important components of elements.

To achieve maximum productivity of the lawn mower, it is necessary to properly prepare the tool for work, in the process of the mowing, adhere to the recommendations of the manufacturer and safety measures. Consider how the mower should move when mowing grass, how to work with it, how to clean it after work, and also what to do in case of emergency situations.

How to Clean or Replace A Riding Lawn Mower Air Filter | Cub Cadet

Trimmer, or Motokos, the lightest and budget lawn mower, which allows not only to care for the lawn, but also to mow grass on complex reliefs. Such a device is quite possible to cope with high weeds. Motokosa works according to the rotary type. It can be equipped with steel knives that effectively cut thick stems. Almost such a mower repeats the shape of an ordinary hand braid, but with a rotating knife, which changes the technique of performing work.

The use of such a braid is accompanied by a maximum load, but still such devices are good at the places where more dimensional machines simply will not pass. The main drawback of such equipment is that all the mowed grass will remain on the lawn, and it will have to be assembled with a rake or blown away by a garden vacuum cleaner.

Trimmers can be battery, electric or equipped with a gasoline engine. It is very difficult to take care of a large area with such a device, since the load on the hands, shoulders and back is created. Without having experience and dexterity, you can get muscle stretching or crepe on the second day after mowing.


Such machines are more manufacturing. They are equipped with wheels, which significantly reduces the load when using such equipment. The device can work on the principle of rotor, cylindrical knives or segments. Almost all devices of this type have a prefabricated bag where mowed grass accumulates. Therefore, after performing the work, the lawn remains clean. Wheel machines are equipped with an electric or gasoline engine. They are in the form of a frame with a motor and rotor, which must be pushed, or equipped with a self.Propelled mechanism. In the latter case, it is the easiest to work. It is enough to direct the car, and it will move independently.

Wheel mowels on the most popular. With their help they serve home lawns, as well as rather large sites. This equipment is maneuverability, although it is naturally inferior in this criterion to the trimmer. It is more economical in terms of fuel consumption to use cars on a wheel frame, but if the plot is large or has a slope, then a self.Propelled mechanism is better.

Properly Cleaning your Zero-Turn Mower


The lawn mower of this type is used to maintain large sites. It is a self.Propelled machine equipped with a seat and a full.Fledged steering wheel of control. This allows a person to ride it, and not walk from behind. Ryders are equipped with a gasoline engine and allow you to maintain very large areas measured by hectares. Such mowers are always made of steel. They have a large operational resource. As a mowing mechanism, they use a rotor. The cost of riders is an order of magnitude higher than previous types of mowers, so they are not used to care for home lawn. This equipment requires a full parking space in the garage, which does not speak in its favor.

Mini tractor

It is an enlarged rider that provides for the rotor removal mechanism or the possibility of lifting it for the possibility of normal movement on complex surfaces. This is a more multifunctional machine that allows you to attach to it a small trailer for transporting grass, as well as garden equipment. This is a workhorse that will help to give a lift fertilizer, soil, etc. Required to care for the lawn. Often a mini.Tractor can be equipped with brushes to sweep garden paths. Sometimes there are mini.Tractors with cylindrical knives. There are cars with a segment mower, which is fixed from the back on the side and joins the power shaft. The tractor can be equipped with a gasoline or diesel engine. The diesel option is more powerful and economical.


Equipped with special knives, which additionally perform the function of the propeller. As a result, as a result of their rotation, the machine lifts up, looking up from the ground. Such devices are distinguished by remarkable maneuverability, they are not equipped with wheels, so various obstacles pass well. These are almost always gasoline devices, but there are also electrical. When using such machines, it is impossible to establish the height of the mowing. Air pillow mower is the most convenient for mowing on the slopes and tubercles, where wheeled vehicles will practically not advance. The only drawback of its use is that under the influence of air traction, mowed grass is scattered throughout the lawn.


The robotic mower is the most interesting and at the same time a convenient device, since it mophes the grass on its own. She works on the same principle as a robot vacuum. The action of such machines is thought out to the smallest detail. Before starting the device, it is necessary to manually lay a special cable, which will limit the boundaries of the site. The mower does not stop by the set borders. She remembers the places where she has already traveled, so she will not consume her resource. These are electrical devices that independently get to the place of their recharging. They are equipped with a rain sensor, as well as cameras. Thanks to this, having launched the mitch, you can be sure that the robot will drain the grass inside a given perimeter. Unfortunately, a robotic lawn mower is very expensive, so it’s a rarity.

The main attractions of the Disabled House

Particular enthusiasm for tourists causes the cathedral. It was built much longer than the main structure. According to Wikipedia, the height of the church is 107 m. The temple is characterized by serious facade proportions and chic internal design.

The walls and ceilings are decorated with frescoes, the room is decorated with stone and gilding.

The interior is divided into the royal part and the soldier. The royal has become a pantheon over time. Here, the last shelter Napoleon I, members of his family and generals of the Napoleonic army found the last shelter.

This is curious. 12 kg of gold came in handy for the design of the dome.

Visit lazy meadows, at high.Speed lawn mowers and in a nightmare cinema Fortnite

The organ of the 17th century was established in the soldier.

The inhabitants of the house of disabled people

In 1710. 1,500 people were provided with grain and full boarding. By the end of the XVIII century, 4,000 veterans lived in the house.

There were a lot of disabled people who needed help, the institution could not accept everyone. The military who served for more than 10 years settled in the house. After 1710., To become a resident of the royal almshouse, it was necessary to have more than 20 years of service. There were exceptions. Warriors distinguished on the battlefield.

there, lawn, mowers, cleaning, tool, work

The order in the house of the disabled was almost a military. Veterans were distributed into the companies that the officers ruled. There was a serious daily routine and the rules of conduct. The bedrooms were forbidden to make food, smoke, give ladies.

Older people had to work. There were workshops in the house, shoes, tapestries, engravings were produced in them. Those who allowed health were engaged in drill training. There was certainly a visit to the church.

In case of violation of the rules of veterans, they punished. For a small misconduct, they were deprived of food, and the offender ate some days at a loaf and water. For a harsh violation could be evicted.

Museum of modern history

The exposition of this museum clearly indicates what configurations took place in France in the 20th century. The collection consists of 5 hundred exhibits, in the middle of their picture, photo, engravings.

High.Speed lawn mowers

The next location, high.Speed lawn mowers (MOWDOWN), also belongs to the category of unexpectedly. It can be found in the northern part of the island, between the beach village (Craggy Cliffs), located in the E1, E2. F1, F2 block, and the fatal farm (Frenzy Farm), located in the F3 block, F4 on the Fordnite map.

The location is a racing highway, where law mowers with flags are in a row along the starting line. It will be difficult to confuse it with other locks. Land, raise the drop and move to the next zone. The nightmare cinema (Risky Reels).

Where the lawn mowers are stored?

An important question that should be answered, even before the purchase of equipment, is, where the lawn mmores are stored, because you can’t put such an apparatus on the street, and it is inconvenient to bring it into the room. In fact, we are talking about a separate branch that needs a serious solution, because not only comfort depends on this. In most cases, the lawn mowers have impressive dimensions, this is not the technique that will fit in the cabinet, it is on wheels and should stand, just like a car. But after all, it is not worth a separate garage because of this? It is not bad if there are several free square meters in existing outbuildings.

Lawn mowers can turn out to be quite heavy, the internal combustion engine used in their composition, a massive metal frame, bunker and other elements weigh a lot. The device rides along the processed area and also moves to the place of storage, for convenience it should be at the floor level or equipped with a comfortable lane for a small rise. A long handle helps to maneuver, but the trajectory is always limited, it is problematic to drive lawmakes in hard.To.Reach places for storage, this should be taken into account. Before you take the place somewhere in the depths of the garage, you should think about convenience behind the car and racks.

Not many have a country house (although many want to have it), but the cottage is much more affordable. Such a country house allows city residents to join the nature a little, relax, engage in garden or simply enjoy nature. The lawn mowers in such conditions also turn out to be necessary, because the site needs to be put in order, otherwise rest in the thickets of weeds will not bring any benefit or pleasure. In the country, the issue of storage is even more acute, because without supervision in a country bar or garage do not leave equipment.

Lawn mowers are transported to the city to store in another, more reliable place, most often it is a garage in some of the cooperatives, where a car, harvested and many other things are parallel. In this case, another one is added to the main aspect, it concerns the convenience of transportation, because the unit should be placed in the trunk of the car and if it is not about an SUV or minivan, then compactness gains great importance. Lawn mowers with a folding handle, disconnected by some elements and generally small size, are welcomed.

The lawn mowers work on the street, moisture conditions are often far from the ideal and therefore the manufacturer provides for various protection systems from such an impact. Some professional models can work at all in the rain or right after it, that is, moisture is absolutely not terrible. Lawn mowers who are not afraid of dampness should also be stored somewhere, following logic, it can be assumed that the device with water protection will feel comfortable in the open air at any time of the year.

However, despite the most serious protective elements, you should not throw equipment on the street, the constant effect of aggressive factors will significantly reduce the life of. It is recommended to clean the lawn mower after work and put in a dry place until the next use. Metal, plastic and rubber elements will serve for a very long time in this respect. In addition, do not forget that the lawn mowers are not taken into the room (even in their own yard), it is easy to kidnap, and they are expensive.

Lord, burn! Why are Turkish “Bayractars”. A great target for high.Speed air predators

From the first day of the war FOCUS I did not stop the work for a minute. Our team considers his duty to inform the reader about what is happening, collect and analyze facts, withstand enemy propaganda. Today the FOCUS needs your support, to continue your mission. Thank you for with us.

Today the whole world, all military experts, especially Ukrainian and Russian, are a little shocked by the consequences of the massive use of drum drones in Karabakh.

Read the best materials on the Focus page. Technology and science “On

Ours are jumping with delight, preparing public opinion for the purchase of a new large batch of Turkish “Bayractar”, Russian are sad according to the capabilities of the Russian/Soviet air defense, and We even agreed before the thesis about the inefficiency of tanks in the modern war, who are so great drones burning.

But drones burn not only tanks. Harness of howitzers, MLRS, locators, missile systems, infantry positions. Not surprising. Azerbaijan has complete dominance in the air.

That’s not news. It began a long time ago. Back during the First World War, when the first flying floors began to bomb the enemy troops. To fight them, anti.Aircraft guns and fighters appeared.

The history of military equipment and tactics developed in a spiral, as the eternal struggle of armor with a shell: bombers began to fly higher and faster. High.Speed fighters and high.Speed missiles appeared. Flights and sound location stations were replaced by radar.

Typical modern air defense system designed to detect and destroy a speed target type of fighter or cruise missile at heights from 100 meters to 18, and more than kilometers, with EPR at least 1 m.Sq.

And here, breaking stereotypes, slow.Moving “Bayractars” appear, flying at the speed of the first “floor” at altitudes of more than 8 km, and having EPR about 0.1 kV.M. That is, most locators do not see them, and the military air defense systems (those that the Armenians have in Karabakh) do not get.

The means of the electronic warfare, by the way, are also almost useless, because with the control center these drones communicate through a narrow.Minded beam, and interference is ineffective.

Wherein, “Bayractars” use exclusively controlled weapons. Corrected bombs and missiles with laser backlighting targets. That is, where the usual high.Altitude bomber had to be dropped a dozen two bombs in the hope of getting into one tank, drones cost one piece. And they do not risk, like attack aircraft or shock helicopters operating at small altitudes, where they can be shot down with small arms, or “needle”.

It would seem, cheers, victory, panacea. But no. Just another round of weapon development and military equipment. Over. In the opposite direction. And even a dead end.

First of allThere is simply nothing. Secondly,

Furthermore, It is best to use not even reactive fighters against low.Speed “Bayractars”, but piston light aircraft having a sufficient ceiling. A pair of infantry machine guns under the wings, and an inexpensive boat gigaucheal radar near the fuselage would quickly put an end to the rule of drones in the air. But this is also the Armenians.

So the question is not the effectiveness of drones, And in the inefficiency of the old air defense systems sharpened for other goals, and the absence of a fighter aviation of cover.

Robot Lawn Mower Review: 1 Year Later With A Fully Automatic Lawn Mower. Husqvarna Automower 315X

In the very near future drones will appear. Fighters of drones. There are quite high.Speed to quickly overtake victims, high.Altitude, armed with small.Caliber machine guns and miniature missiles, even shotguns, aviation grenades and lowered cables, as in the good old days.

Equipped with effective locators, and carrying on board the REB station. Detecting and destroying goals completely autonomously. Automatically. Impeccably. After all, the slow.Moving “Bayractars” is a great target.

And then the story will again go in the right (if I can talk about the improvement of methods and methods of murder) direction. Real unmanned aerial predators will appear.

there, lawn, mowers, cleaning, tool, work

High.Speed. Most High. Similarly. Intellectual. Cunning.

And it will be very soon. Will we be needed in this future. This is a question.

The better to refuel and how to serve a lawn mower?

Everything is similar to cars and motorcycles here. For refueling, ordinary gasoline AI-92 and above is used. Service includes periodic oil replacement, cleaning of air filters or replacing belts. Detailed information about the necessary work is always indicated in the instructions that are included in the set of documents.

Most modern lawn mowers provide the ability to adjust the heights of mowing. It can be produced in various ways:

With frequent operation, the second option will be optimal.

The adjustment itself is necessary because different types of lawns allow different sowing heights. It is usually recommended to cut no more than 1/3 of the height of the grass to avoid its yellowing and wilting.

What are the lawn mowers?

Mechanical wheeled lawn mowers Easy in management, electricity or gasoline is not needed here, but significant muscular efforts are needed. They are environmentally friendly, silent and allow you to regulate the height of the grass mowing. Cutting mechanism. A cylindrical knife with a wheel drive. Such a tool is good for caring for a young lawn, since the low speed of rotation of the knife prevents grass with a fragile root system.

Mechanical wheeled lawn mower

And we will consider gasoline and electric lawns below.


As you can see, the belt and direct drives are characterized by efficiency, the coefficient of useful action, weight, size and even price. But their main difference is reliability and wear resistance. Therefore, when choosing, you need to build on the conditions of operation of the lawn mower.

  • How often will you mow? If rare, the grass will be high and stiff. So, it is better to take a lawn mower with a reliable direct drive. For fast and frequent mowing, cheap belt drive is better. Over, with frequent operation, the belt will be worn out and burst quickly. It can be easily and simply replaced;
  • What is the area of ​​the lawn? For small lawns and lawns, there is no need to pay big money for a direct drive. For a large territory, you should spend money, because the mower will have to work for a long time, and a stable asynchronous motor with direct transmission is much more reliable and powerful.

In general, the direct drive, although slightly heavier, is more expensive, but it will last a very long time, without breaking. Especially if you clean the area from stones and thick branches before the mowing and take care of a stable tension. And if there is no way to engage in this type of cleaning, then it is quite possible to dwell on the lawn mower with a belt transmission.

The device of the lawn mower

Lawn mowed. A tool for mowing grass, which simplifies the care of the site. The device carefully cuts the grass at the same distance from the surface of the earth. This is a significant plus compared to trimmers. Using the tool, you can quickly and without much effort give the territory a neat, well.Groomed look. Using a manual braid, it will definitely not be possible to achieve such an effect.

The range of lawn mowers is very wide. Manufacturers produce tools with different technical characteristics, power indicators. Models differ in the type of nutrition, size, weight, cost. Before buying a mitch for the lawn, you should familiarize yourself with its device and constructive features. This will not only simplify the choice, but also facilitate the maintenance and repair of garden equipment.

Operation Rules

Before you start using mowers of any companies, including AL-KO, carefully read the instructions, check in what condition is located Corps, cable and knife. You cannot start work if there are damage. Then set a pen, a collection for grass and choose a mowing height. The best to mow all in special clothes and shoes. If the lawn mower is very noisy, it is advisable to work in headphones. After preparation, the engine is included.

All work is performed exclusively in daylight hours. You can’t mow when it rains. If there is an obstacle ahead, it is eliminated after the device is disconnected. After completing the work, deck and knives are necessarily cleaned from the ground and herbs. After each haircut, the grass collector is devastated. Then wipe the grille and body. Regular and correct courtship increases the service life of the lawn mower, and timely inspection will help to avoid breakdowns of mechanisms.


The installation of the robot was carried out in the cottage village near Moscow. As can be seen in the photographs, layout and arrangement of the territory, the closest attention is paid to. Two.Level plot. Divided into two “steps”. On the “Upper” there is an economic building fenced off by bushes (1). The rest of the space of this part of the site is occupied by the lawn (2), on which several lamps and trees are located.

In the “lower” parts there are various buildings, automobile and sports grounds, tracks and several lawns. Over, the owners were enough for the robot gazonocosel to process only one of them-the largest in area. “Upper” and “lower” lawns are connected by a wide passage so that the mitch can move along it. Passage and “lower” lawn are visible in the photo (3). The slope, although quite cool, is not a hindrance, Husqvarna Automower 420 has the maximum permissible slope value. 24 cm per meter. The total area of ​​these two sites is approximately 1200 m2. The mower was selected “with a margin”, “passport” value of the processing area. Up to 2200 m².

Other lawns on the site are relatively small in size and at the same time have a complex shape. Two of them. In the photo (4). In theory, you can install the mowing so that it partially processes these areas, but there was no similar task: the owners decided that it was easier to provide small lawns with ordinary lawn mowers. By the way, the mowing of grass throughout the site, taking into account breaks to empty the grass collector of an ordinary, “skate” mower, occupied them for up to five hours.

The most common problems

Here are the most common malfunctions:

21-inch Ryobi 40V HP Brushless Self-Propelled CROSSCUT Lawnmower Review

  • The engine does not start;
  • The motor stalls arbitrarily;
  • The engine does not gain momentum or does not hold them;
  • Immediately after the start of the mowing, the engine speed falls and it stalls or works with interruptions;
  • Smokes strongly;
  • It goes badly;
  • Does not stop even after the operator released the wheel drive lever;
  • Shakes hard;
  • Poorly cut the grass.

The engine does not start

Reasons for that, Why the motor does not start, quite a bit of:

  • Empty fuel tank;
  • A air filter is clogged;
  • A muffler is clogged;
  • The ignition switch is installed in the wrong position or faulty;
  • The air damper control lever is in the wrong position;
  • Faulty candle;
  • Broken or clogged carburetor.

Primary inspection

To establish the real cause of this defect, you must first carry out a full external inspection And make sure that the holes of the air filter or muffler are not clogged, there is gasoline in the tank, and the throttle control lever and the ignition switch are in the correct position.

If everything is in order with this, then it is necessary Perform pre.Launch work, including the cleaning of air or fuel filters, described in detail in the instructions for the operation of the braid, and then try to start again.

After making sure that the motor still does not start, the mowing is placed on the table and proceed to a more detailed search for the reasons.

First, the spark plug is twisted and tightly plug the candle hole with your finger, then smoothly, but quickly and strongly pulled the hand starter cable or pressed on the electric launch button.

The moving piston should create sufficient air pressure so that it pushes the finger and goes outside. If this does not happen, then the motor needs serious repairs, which is difficult to make at home, so it is better to take the mower to a specialized workshop.

After all, the reason that the piston does not move after the starter’s cable or rotation of the shaft an electric starter can be:

  • Damage to the starter, because of which he does not transmit the energy of rotation to the engine shaft;
  • The cut off the flywheel that connects the flywheel and the starter with the engine, and also provides the correct ignition angle.

To eliminate both malfunctions, not only tools, but also skill are needed, so those who do not have the skill of repairing any engines are better not to try to eliminate such problems on their own.

Further check

If the piston moves, then you must first check the fuel supply, for which the candle is thoroughly wiped with a dry clean rag, then screw it into place, and the regulator of the position with an air damper is placed in the “OFF” position, as during the start of the engine.

Then, the lever of the air damper is transferring to the “ON” position and the candle is unscrewed, which is carefully examined.

Wet contacts indicate that gasoline enters the engine and the problem of ignition, and Dry contacts speak:

In both cases, knowledge and equipment are necessary for proper diagnosis and repair, therefore, it is better to take the device to repair the apparatus to a specialized workshop.

If the fuel comes, then it is necessary to check the external condition of the ignition coil and the high.Voltage wire. If they have cracks or poor contact as between the wire and the coil, so at the place of connection of the wire with the candle tip, they must be replaced.

If everything is fine, then You need to check the spark, Why can you use both a deliberately working candle and a bolt suitable in diameter, which is inserted instead of a candle in a high.Voltage wire.

The candle is leaned with threads against the ribs of the engine cooling shirt, and the bolt is placed so that it does not come into contact with the mowing case or its engine, and the distance from it to the cooling shirt was 1-2 mm.

After that, disconnect any wire going to the ignition switch, then pull the lever of the manual starter or press the electric button and see if the spark will appear.

If there is no spark, then the device does not start for one of the reasons:

there, lawn, mowers, cleaning, tool, work

For the repair of these damage, skills and equipment are needed, so those who do not have them are better to trust professionals. If there is a spark, then the problem is in the spark plug, so after replacing it will work.

The motor stalls arbitrarily

The most frequent reasons why the engine stalls during operation are:

  • Dirty air filter;
  • Dirty fuel filter (only for models with a fuel filter);
  • Faulty ignition switch (does not completely open the ignition circuit);
  • Damaged insulation of the ignition shutdown wires;
  • Faulty air damper drive;
  • The tightness of the ignition coil is broken or its winding is broken.

The primary inspection is performed in the same way as described in the previous section. If outwardly everything is fine, then carefully inspect and feel all the wires suitable for the switch that blocks the operation of the ignition system, Perhaps the insulation is damaged somewhere and when in contact with the naked metal metal, there is a closing spark.

The main selection criteria before buying

In order for the purchased device to be useful and justified costs, even before the purchase, it is necessary to decide on the working conditions. These parameters include weed grass on the site, neglect of the processed areas, the possibility of regular mowing and the presence of a power grid. It will not be superfluous and taking into account the characteristics of the relief features of the area. Adequate assessment of the described working conditions will help you choose the right lawn mower model

Do not skimp, because an unsuccessful choice of an instrument for a mowing is a discarded money, since in the end you will have to buy again. It is better to immediately buy a quality and not cheap option than paying twice.

Instead of a preface:

Hello! My name is Vyacheslav Golitsyn, and I am geek! It still began at school, my friends from the physical education team planted on this. At breaks, stealthily in the toilet and around the corner of the school, we discussed new gadgets and schemes for bugs-radio transmitters. I thought I was just pampering, but then I could no longer jump off. The electronics that I was going to fix in the house no one had ever seen a working one, during the next enchanting revelry, I was cruelly killed by I killed the electronics 302 tape recorder. I was punished, but I could not completely abandon my pernicious habit, so I became a secret geek, but even in the radio club they didn’t take me for my own, yes, there are little noticeable in clubs, because of the pathos everything is upside down. When I exchanged my new snowman for a textbook A.Marchenko and the designer of the car receiver, I realized that I was swinging to the bottom! They began to recognize me in the face on radio markets and in electronics stores, I read “Youth Technique” and mediocre forums at night on Dialup’e. I started wearing glasses with simple glasses, t.To. Everyone called me “Ochkarik”. Even my own father once put me 3 in classmates. Finally broke when the girl threw me, then it suffered me I bought a new soldering station, and my account on Aliexpress began to demand blood Most of my modest salary.

Then life somehow got better Family, children, and for several years now I have been in the eyeballs, but every day I have been reading a habr (now Hiktayms). I am a very middle level manager, I am working in the office like everyone else. Alas, I have no technical education, but when I read an overview of the new gadget, mini-computer or automation board, a huge number of ideas are already being formed in the mind where it could be applied (the automation of the office toilet is not offered). After a short flight of imagination, you usually follow the order and the languid expectation of the foreign miracle of the wonderful. During the time the long.Awaited load passes all circles Ada Sorting centers of the Russian Post, romance gradually from a new model of modern genius of technical thought disappears. So it was with Raspberry Pi, Arduino, a small box with sensors and wires. But then pain appeared. Her name is a summer house, or rather a lawn in the country.

The best non.Self.Propelled models

Next will be considered gasoline gas mowers without a self.Propelled mechanism. Despite the significantly lower price, the given models are characterized by high reliability, so they will last more than one season.

Gasoline lawn mower Husqvarna LC 140 9676367-01

A relatively inexpensive Swedish mower is suitable for servicing small private lawns. The technique is compact, easy to manage and productive.


  • The capacity of the grass collector is 50 liters.
  • The height of the position of the cutting element is tuned from 25 to 75 mm. To choose the best position, there are 10 stages of adjustment.
  • Speasing width. 40 cm.


  • Large rear wheels diameter will provide passage on a complex landscape.
  • Combined grass collector, in which strength and light weight are combined.
  • Cutting deck steel, which prevents breakdowns in a collision with solid obstacles.
  • Easy engine start.
  • Briggs Stratton engine provides high power.
  • Low noise.


  • Not enough fitting to connect a hose.
  • The grass collector is instantly clogged with the mocking of high vegetation.
  • It develops inconvenient.

Gasoline gasoline Makita PLM 4626N

When you need to choose a lawn mower, quite strong, simple in circulation and inexpensive, we advise Makita technique. It has an affordable price, and there is no excess functionality in it. What else is needed to work in the country?


  • 7 steps of adjusting the height of the cutting element.
  • A combined grass collector contains up to 60 liters of vegetation.
  • Speasing width. 46 cm.
  • The mowing height is tuned from 25 to 75 mm.


  • Little.
  • Small weight.
  • The case is made of steel, ensuring reliability and durability.
  • Low content of a harmful exhaust.
  • Easy to get parts for repair.
  • Many service centers Makita.
there, lawn, mowers, cleaning, tool, work

AL-KO Classic 4 lawn mower.66 P-A Edition 119765

You can’t decide how to choose a relatively budget gasoline lawn mower for giving? We advise the technique of the German company AL-KO. This model for small areas is cheaper than all other mowers from our rating. Characteristics are enough for domestic needs.


  • The width of the mowing is 46 cm.
  • The model is designed for a plot with an area of ​​up to 1100 m 2.
  • The capacity of the container for the grass is 65 liters.


  • There is a window for the grass containers that allows the employee to track the level of fullness.
  • Wheels on bearings increase maneuverability.
  • The main folding handle, which positively affects mobility of the mowing.
  • Low price.

Rating of electric lawn mowers from 1,500 to 2000 watts

Medium-power devices are suitable for areas with an uneven surface with an area of ​​5-6 acres. They cope with high and tough shoots, many support mulching.

Gardena PowerMax 1800/42

  • Wheel lawn mower
  • Electric engine (1800 W) from the network cable
  • Width / mowing height: 42 cm / 20-60 mm
  • Speasing area: 800 m²
  • End of grass into a hard grass collector, back
  • Mulching
  • Weight: 14.3 kg

The rating opens a rotary electric lawn mower for a site of about 7-15 acres with a not very flat surface-large wheels will overcome irregularities. Small weight thanks to a plastic structure allows adolescents and women to work. The regulator of the position and height of the handle adapts it to the growth of any operator. A hard grass collector from durable plastic puts up to 45 liters of grass. Wide wheels from shockproof polymer do not leave strips on the lawn. The metal handle is covered with pleasant plastic does not cause discomfort. It is not cold, does not transmit vibration. Also, the pen is adjustable in height. There are 5 modes of mowing height.

  • Capacious grass collector;
  • Folding storage handle;
  • Wheels do not spoil the lawn;
  • Power is enough to cut high vegetation.

Blackdecker LM2000 QS

  • Wheel lawn mower
  • Electric engine (2000 W) from the network cable
  • Width / mowing height: 48 cm / 38-100 mm
  • Speasing area: 800 m²
  • End of grass into a soft grass collector, back

In second place of our Top, a powerful electric gas.Beam with an engine of 2 kW engine. Effectively fights any grass in three modes: mowing and collecting in a container, a mowing with a dump on the lawn and grinding with mulching. A 7-position mowing height regulator adapts the type of lawn to any landscape design project. The EDGEMAX system captures the grass on the side, getting rid of the need to use a trimmer. The launch crossbar makes it convenient to control the lawn mower with one hand.

  • Folding handle to reduce dimensions;
  • Central lever for adjusting the height of the cut;
  • Hull handles for transfer;
  • Three modes of the fight against grass.

Kruger Elmk-1800

  • Wheel lawn mower
  • Electric engine (1800 W) from the network cable
  • Width/mowing height: 32 cm/20-60 mm
  • End of grass into a hard grass collector, back
  • Weight: 7.5 kg
  • Case material. Shockproof plastic

A powerful electric gas mowing hook is characterized by ease of operation and maintenance, low noise level. Hard plastic grass collector with a volume of 50 liters does not need frequent cleaning. Compact dimensions and low weight allow you to easily transfer the tool from place to place and maneuver between trees and bushes. The ergonomic handle can be configured under the growth of the operator. A special coating of the handle smoothes vibration, so the operator’s hands even with prolonged use of the Kruger electric gas.Beam will not get tired. The manufacturer also has a 1900 watts model, which costs a little more, but has improved characteristics. For example, it sets a resistant induction engine in it. You can see more detailed information about the lawnical mower on the brand website.

  • Hard and voluminous plastic grass collector;
  • Three.Level mowing;
  • Acceptable price from 6990 rubles;
  • Thoughtful design.

Makita ELM4121

  • Wheel lawn mower
  • Electric engine (1600 W) from the network cable
  • Width / mowing height: 41 cm / 20-75 mm
  • End of grass into a soft grass collector, back
  • Weight: 19.5 kg

A productive lawn mower capable of maintaining about 6 acres of lawn. A quick.Set combined grass collector passes moisture and is easily cleaned. The container overflow indicator will notify the need to devastate. Dimensional rear wheels with a wide profile take on the main weight of the device with grass and do not crush the coating. Small front ones give a maneuverability apparatus. Belt gear will prevent engine breakdown when jaming a knife. The case is made of stainless steel, which gives the mower reliability.

From the reviews it is clear that a quite good unit for the care of the lawn, the main thing is to use for its intended purpose and not be surprised that it is impossible to shake weeds or virgin lands. Buryan must first go through a trimmer.

  • Neoprene lining that extinguishing vibration;
  • Safe inclusion function;
  • Folding handle;
  • Engine protection when jaming a knife.


  • Wheel (non.Self.Propelled)
  • Electric engine (1600 W) from the network cable
  • Width / mowing height: 35 cm / 25-65 mm
  • Speasing area: 500 m²
  • End of grass into a hard grass collector, back

A lawn mower with a unique technical solution PCG, which guarantees cleaning up to 99% of mowed grass. It consists in a special form of a knife and its aerodynamics. Air flows direct cut stems into a container. The central lever in a couple of seconds sets the required height of cutting of vegetation within 25-65 mm. The handle on the case will simplify the carrying of the device, and the folding handle. Its transportation to the country and storage. The cable holder will prevent taking the plug from the outer socket. Wide wheels do not damage the coating of the lawn.