Alteration of the mitch to the single -based Huter tractor. The scope of the use of motor blocks Huter

Review of Huter motor blocks. Description of models, video work, reviews

It is important to understand that the attachments are not universal and for each motorbellum is selected individually. For example, a ceremonial is considered a mandatory purchase, since the wheels of a cultivator are often skipped when working with the soil

To choose the right option, you will have to proceed from the model of the walk.behind tractor.

Cutters

As for the milling cutter, they are divided into two types: Sable.shaped and “goose legs”. Manufacturers add the first variety to the engagement kit to the walk.behind tractor. It has different sections, due to which the width of processing changes, which can reach 135 cm. In general, such mills are good for work and are convenient to disassemble.

This is relevant during a breakdown, because it allows you to replace the problem part, and not the entire structure. These mills can be Natural, but the disadvantage of nozzles is the fact that they work well and for a long time only with soft soil. If the soil is dense and complex, it is more advisable to purchase “goose paws”. They are usually not included in the basic kit, but quite high.quality prepare the soil for planting potatoes.

When choosing a plow, it is important to consider the type of soil. For example, an option with one single.boxing type sip is good when the soil is light

If the soil is complex, it is worth watching a swivel product with two soup. It will plow the ground exactly with a one direction direction.

As for the preparation of the soil for planting and hilling, you need to take an option with a V-shaped plunder

It is also important to consider the power of the unit. For example, single.row cigns with a fixed width are suitable for a walk.behind tractor with a power of 4 liters

With. The rotary device does not need a hitch, since they are installed instead of a walk.behind wheel wheel.

Digging

Potato.cutter is chosen based on the type of root crop collected. Given that it is fan and roar, it is worth noting: the first is cheaper and less effective, since after it a little more than 10% of the crop remains in the ground. This is not scary in a small farm, since you can collect the remaining root crops manually. The variant of the vibrational type differs in lower losses (no more than 2%), works through vibration, shaking everything except the fruits.

Pitch and adapters

With regards to mowers, you will have to choose between rotary and segment. The former are more simple in maintenance, the latter work cleaner than rotary analogues. The adapter is embarrassed and steering. The first option is equipped with a seat, lifting lever and brake, it is cheaper, however, the working capabilities of the steering mechanism is significantly larger. He can perform the functions of a grader, mini-tractor, dump truck and arable unit.

Snowman

It is important to decide on the type of device here. It can be a dash shovel, a brush mechanism or a rotary thrower

The first option is cheaper than all varieties, and its width can vary in the range of 80-150 cm. In this case, for a larger size, it is worth purchasing a device with a higher power.

Motopopes

When purchasing such equipment, you need to take into account its performance. For example, the average range can be 20, or even 30 cubic meters per hour. The pressure that will be created in the process can be 4-5 m with an indicator of the suction depth of about 10 m.

Review of attached equipment

In order to perform the soil processing better, the Huter cultivator can be equipped with additional attachments. often, owners use such necessary devices in agriculture as:

Motobobes, the power of the engines of which is 7.5 and 9 horsepower, have more opportunities about the use of a particular attachment equipment. Installation of additional agricultural devices is carried out as quickly and simply as possible. Thus, you can not only expand the functionality of the unit, but also turn it into a snow removal machine, a device for sweeping, a pump and even a lawn mower.

On sale there are such types of hinged equipment for a Huter motor-cultivator as rotary mowers, harrows, water pumps, weighting, shovels, etc.D.

Self.manufacture

Surely the reader has already matured the question “but whether to make a mower to the Neva motornote with your own hands?”Well, nothing is impossible in this. Only in order to create a truly high.quality and relatively safe device at home may need months of hard work, plus tools and materials.

The main thing that needs to be made first is a strong metal frame. For this, iron corners are suitable that can be welded to each other. After that, you need to decide on the configuration of the future braid for grass and start working on the tool itself.

Variant of a homemade rotary mowing

• Two working discs are removed from the old grain tractor seeder, and a chain and a gearbox from a chainsaw are used as a drive.
• It is necessary to separately make blades with your own hands and, using the holes pre.drilled in the disks, fix them on the disks.
• The knives should be mobile so that there is less risk of damage if the braid for the grass “finds” a stone or another hard obstacle in your meadow.
• It should be noted that the discs of the braids should rotate towards each other. Otherwise even herbal rolls will not work.

As a result, something similar to this photo should be obtained.

How to make a finger mowing

• You will need to take two metal beams up to one and a half meters long and drill a dozen holes in them for bolts.
• The bolts between the bars will need to be fixed by the separately made rail with cutting edges.
• This whole design should be attached to the hard frame and stayed with two guides.
• Just like for the rotary unit, you will have to make a belt drive with pulleys and bearings.

Of course, the work is interesting for the Samodelkin, but the factory attachment equipment is almost always more profitable than its own.

If you want to choose a mower for the Neva MB 2 single tractor, study all the features of those areas on which you need to work. Universal tools, as practice shows, in this category there is no.

The most reliable criterion for choosing can only be the experience of those who themselves used such devices. In any case, the mechanization of the haymaking, especially if it is conducted in significant volumes only by one person, this is a significant plus for a personal economy.

Popular models

Domestic manufacturers produce these units in various configurations. A common braid is the one that is produced under the Zarya and Zarya 1 brand. the product of the Kaluga OJSC Kadi.

This multi.purpose model. It is distinguished by high production indicators, ease of management, ease of installation and maintenance. The mechanism of attaching the braid frame to the rotary node of the motor block is simple and universal, approaches almost all domestic cultivators.

Another model widely used by farmers is KR-80. It is suitable for operation in combination with the motoblocks “virgin lands”, “Neva”, “cascade”, “Oka”. You can mow grass, coarse shrub, cereal crops.

Similar characteristics are possessed by the rotational suspension mower KRN-1. Produced in the territory and Belarus. Installed on most leading units. It has modifications designed for industrial field processing.

Before acquiring an installed addition to the walk.behind tractor, it is necessary to find out the characteristics of their compatibility. Daewoo Daewoo Daewoo Cultivator is sometimes sold with additional nozzles from the same company. They easily combine with its leading mechanism. Cosocosers of other manufacturers may constructively differ, which will interfere or nullify the attempt to connect a walk.behind tractor with a suspended unit

When buying this or that agricultural equipment, it is worth paying attention to this issue

Homemade mower for a walk.behind tractor, characteristics and description

Usually homemade mowers for a walk.behind tractor are constructed, a front.type type: rotary mower, segment mower and braid wagon.

With independent manufacture of the basics for mowing, they often use the designs of factory models. Most details are purchased in stores and then used in their designs.

The welded frame is the basis for the segment and rotary mowing. It is made of metal corners, size 4x4cm. For a wheel axis, a hull of bearings on the frame is installed. Then the working part of the mowing of the selected type is made.

Necessary materials

As the source materials, they choose:

• Cypes for planting grains in an amount of 2 pieces.
• Chain from the gearbox of the chainsaw.
• Metal knives (8 pcs.).
• Shinka.
• Soshnik.

In addition, bolts, nuts and other small details that are usually in the garage of any owner may be required.

How to do it with your own hands

Collecting a haymaking on a one.axis tractor without experience in metalworking is difficult. Do not do this work when there is no desired tool and components at hand. But if you well understand the design, prepare the necessary drawings and work strictly on them, you can save and make equipment that will not be inferior to the factory.

Rotor mower

A complex option, since you need to find a drive due to which the design will work. It can be bought in the same place where finished products are sold, they usually trade in spare parts. It is necessary to collect in the following sequence:

• Find ready or make a new drawing. Think through the dimensions, features of attachment to the walk.behind tractor, a power transmission system from technology to a mower.
• Buy a drive for disks. He must ensure the movement of the axes towards each other.
• Choose metal disks in size. Any options are suitable, the main thing is that they are made of steel and have the same diameter.
• Boil the frame. Think about how to fix the mechanism on it. Attach the discs, for this you can make an axis from a thick.walled pipe or a metal bar.
• On the edges of the disks, fix 3-4 knives at an equal distance. They are placed on small axes so that during rotation they are advanced.
• Fix the pulley for the drive and the tension video. Here it is necessary to take into account the length of the belt, it is necessary to pull it well.

To fix the frame from the pipe or corner in front of the discs, if a stone comes across in the grass, it does not allow damage to the working parts.

Fix all parts firmly. Use high.quality fasteners, tighten the compounds with self.ending nuts, during vibration they do not unscrew. Color so that the metal does not rust due to high humidity and plant residues.

Segment mowing

Collecting it by an order of magnitude easier. But at the same time, you need to find an eccentric mechanism that will ensure the movement of the working part, it is difficult to make it with your own hands. You will need a welding machine, several rectangular pipes and bolts with a thickness of at least 8 mm. Do this:

• Find a drawing or make it from a finished sample. Accurately apply sizes.
• Boil the bearing frame. It will be attached to both the working part and the node with which the mitch will be fixed on the walk.behind tractor.
• Make guides on the frame in which the strip with knives will move. The easiest way is to make their P-shaped.
• Collect an element with knives, fix them on the bar. Check how it moves in the guides.
• Put two rods that will ensure the movement of the working part. Attach them to an eccentric mechanism. Put a drive through which power will be transmitted.

After assembly, check how the mower is placed on a single tractor. Put a belt, make sure that the video provides good tension. Take a trial launch at small speeds. If the movement is not straightforward, or there is some kind of backlash, understand and make changes to the structure.

Pitch-brewery

This option is easiest to make, since there are no complex components in the design. You can adapt as a wagon an adapter that is used for plowing and other agricultural work. But it is easy to collect it, observing simple recommendations:

• Make a drawing. Provide factors such as processing width and trolley length. If it is ready, then adapt the parameters for it.
• Put the wheels on the axis, weld the drawbar to connect to the walk.behind tractor. Put the seat and foot support on top.
• Make a mowing housing. Boil it from sheet steel with a thickness of 1 mm or more. The size of the box should be 10 cm larger than the diameter of the knife.
• Install a corner gearbox on top to rotate the axis through the pulley. Make a knife out of steel, fix it in the lower part.
• Screw the body with bolts to the cart. Provide the system of regulation of the location of the location.

Ensure the convenience of motor block management. An important part is a belt drive, firstly, the tension should be good, and secondly, it is better to put the casing from above so that the mobile part is closed. You can not do the seat, but put the wheels in the rear for the stop and work, as usual.

It is possible to assemble a mower for a walk.behind tractor with your own hands only when preparing a detailed drawing and the presence of all the necessary details. The rotation mechanism is easier to buy in the finished form, as it is difficult to make. It is necessary to accurately adjust all the elements to each other and connect them with strong fasteners, excluding the weakening of the compounds from vibration.

Design features

Devices produced by different companies can vary in external and some technical data. The principle of the functioning of such units is identical and dictates an integral list of nodal blocks included in the design.

Standard rotary braid for grass is made of:

• frames;
• subframe;
• balancing mechanism;
• cutter;
• field divider;
• traction fuse;
• racks;
• protection of the cutting apparatus.

Frame. element designed to attach the nozzle to the walk.behind tractor. Has two axes facing the sides. One of them serves to fix the frame on the lower rods of the leading apparatus. The second is attached to the second from the overload of the rod holding due to bolts and two nuts. An element with a bracket will join the frame, which allows you to install a subframe.

The subframe is a welded part connecting the frame and cutting element. It consists of a rectangular case. On the one hand, the tube with bushings introduced into it is welded. In the middle there are “ears” designed for fastening transport traction and device that regulates the height. The side of the bracket is on which the traction fuse is attached to. On the subframe, the drive itself and the protection of the belt transmission are fixed.

The balancing mechanism is designed so that the cutting device repeats the terrain relief. Thus, the best mowing of vegetation is achieved. Using this mechanism, the mower is also converted into transportation mode. Its adjustment is carried out by special tension bolts.

Cutting device performs mowing. Its body serves as a whole crankcase. The cutting elements are based on the soil through a special pallet installed below. The cutting device can have on its body how much rotors. There are usually two of them in the motoblock modification. Rotors are equipped with two knives. The transmission of mechanical effort from the motor to knives occurs by means of a belt of traction, gearboxes, a number of shafts and gears.

Field divisor helps to separate mowed and dwarf grass. It consists of their shield, springs and bolt fasteners. The spring mechanism allows the divider to move back at the time of overflow of the cut vegetation.

During the mowing process, the cutting mechanism may come across an obstacle. In order to avoid a breakdown in this situation, the rotary mower is equipped with a traction fuse. Using this node, a braid for grass can deviate from the working position to the moment established by the user.

The stand helps to hold the hinged unit in a convenient position at the time of its connection to the walk.behind tractor.

The assembly knives rotate at high speed. For the safety of a person using equipment, they are placed in a protective casing. It can be made of light metal or tarpaulin fabric.

Various modifications of rotary braids can differ in the presence of certain details. Some of them can be purchased, and others are made independently.

Service and storage

The duration of the uninterrupted operation of the mechanism of a motor.block braid for grass directly depends on regular maintenance. Within the framework of the service work, the device is cleaned from herbal residues, dirt and dust. The degree of tightening of the threaded joints is checked. the weakened are pulled up. The tension of the belt is measured. Knives of the cutting mechanism should be sharply sharpened. To do this, they must be periodically removed and undermined. In a hinged position, it is forbidden to do this. Adjustment of the balancing mechanism is carried out after each fact of operation. Its spring part is checked and regulated.

Details of nodes subject to high friction are subject to regular lubrication. The conical gearbox, the section of the cutting timber and bearings, especially need it, especially. Lubrication is carried out only through the corresponding oil openings.

It is not recommended to pour oil or apply thick lubricating material in the rubbing areas not equipped with oil.liner traffic jams. This will lead to the sticking of dust and dirt in greased places, increase the degree of wear of parts and reduce their service life.

The procedure and list of works carried out for preparation for long.term storage is determined by typical characteristics. The main nuances of such preparation include cleaning of dust and dirt, removal of moisture from metal surfaces, coating parts with special anti.corrosion solutions. An important factor is the right choice of suitable storage location. It should be dry, protected from mold, drafts and other aggressive influences.

Additional information on how to prepare a rotary mower for the off.season storage is in the operating instructions from the manufacturer.

Look at the rotary mower on the Neva walk.behind tractor in action in the next video.

Non.mounted equipment

Each manufacturer offers, together with his products, use auxiliary components. As for the Chinese motor blocks of Huter, they can be operated with the following equipment.

• Cutters. The assortment of these tools is quite wide, so the detail can be selected specifically for a particular task.
• Water pump. A very useful device that is relevant for use in large agricultural areas.
• Ground.spaces. The necessary part that increases the momentum and patency of the technique in severe types of soil. The use of this detail in the offseason and winter is especially relevant.
• Nozzle for removing the edges of plants.
• Harrow. Tool thanks to which you can make furrows in the ground. Subsequently, they are used to sow crops or watering plants.
• Hiller. Performs hilling of beds without using manual labor.
• Mower. A tool that allows you to prepare animal feed, as well as harvesting grain.
• Adapter. An auxiliary element that increases the maneuverability of the machine, and also makes it possible to use the unoic tractor together with the trailer.
• Plow. The most popular tool that is used in conjunction with motoblocks. During the operation and cultivation of land, plows demonstrates much greater efficiency in comparison with the milling.
• Snowman. This equipment can be manufactured by another manufacturer. Thanks to an additional device, a single.based tractor can discard snow over long distances.
• Clutch. The part responsible for fastening the mounted and trailed equipment to the machine body.
• Tears. Elements necessary for light equipment to ensure stability and good adhesion to the soil.

Subtleties of use

In order to use motor blocks on the farm as productively as possible, it is important to control the amount of oil in the tank. Since the lack of substance in the mechanism can lead to premature wear of mobile parts. For these devices, the manufacturer recommends using 10W40 brand oil, and pour it only at positive temperatures. The first replacement is needed after 10 hours of engine operation, the rest of the derive work will be required after every 50 hours of functioning of the unit.

As for gasoline, for Huter walk-behind tracts, you should use fuel not lower than the A-92 brand.

How to assemble an adapter for a walk.behind tractor with your own hands

Collecting the adapter on your own at home is not so difficult. In fact, it is an ordinary trailer cart. The trailer is designed in such a way that the center of gravity of the entire structure falls on the supporting frame. The most complex mechanism here is the clutch mechanism with MB, since its strength depends on how long the device will work.

The design of the standard device consists of the following components:

• frame;
• steering wheel;
• pair of wheels;
• operator sitting;
• hitch;
• lifting mechanism of the coupling device;
• brake mechanism.

In the drawings below, you can see drawings by which, in the presence of skillful hands, you can build a simple device with your own hands.

Rice 1. Drawing of the foot site and part of the frame of the attached trolley

In the manufacture, a metal pipe of a round or rectangular shape or a metal rod is usually used.

The clutch mechanism allows you to fix the hinged equipment trailer to the walk.behind tractor, provided that the connecting brackets of the walk.behind tractor and adapter are suitable for each other in diameter.

Step.by.step instructions for creating an adapter can be seen in the corresponding video:

What is included in a home.made mower

For assembling lawnmands at home, it is recommended to use an electric motor. The power of the lifting element should be more than 1 kW. As for the number of revolutions, their number should be at least 1500 per minute.

The size of the capture on average should be at least 5 cm. A power unit in the form of a motor can be taken from any old household appliances. For example, a vacuum cleaner, a washing machine and a chainsaw. The main requirement is the performance of the part.

In addition, the lawn mower is equipped with the following set of elements:

• Electric cord providing power;
• Maneuverable handle that allows you to control the entire installation;
• Knife. It will be used as a cutting part;
• Several wheels for installation mobility.

Experts recommend purchasing a protective casing that helps protect the user at the time of operation of the device.

As a cutting part, it is recommended to use metal knives that can be made of tool steel.

The width of such parts should be at least 5 cm, and their thickness is 3 mm. The photo contains an option to create a saw disk. As for the shape of the knife, it can be absolutely any.

The device of the mowing handle

You can use a metal profile as a handle for a home.made mowing, the length and width of which should be calculated taking into account the growth of the user.

In the process of moving the installation, a person should not bend and experience any discomfort. For the mobility of the installation, small wheels are used, which can be taken from furniture or baby stroller.

Do not use too large details that can disrupt the function of the lawn mower.

Poster-platform

Drawing of braids

This drawing shows the option of a mowing platform, which is effectively used in the summer for mowing grass and weeds, and in the winter-as a snowpliter. For cleaning snow masses, special nozzles in the form of stars are mounted on equipment, and in the summer. knives. This modification is similar to a rotary mower, however, it is difficult to execute. This equipment allows you to cut hard grass and remove snowy sediments with ice.

The design of this equipment created by yourself is two cylinders connected by hooks with a frame and conveyor tape. The chassis is created from the corner or any other metal that is found in the workshop. Wheels are installed on the chassis that can be taken from an unnecessary stroller, and a thick plywood sheet, although ideally it is better to use metal. The dimensions of the frame can be different, but it will be optimal 800×400 mm.

The main node consists of two cylinders (5), belt (3), frames (10, 16, 17, 18.20), brackets (19), corners of hooks (4).

Working cylinders can be made of large tin cans, in which it is necessary to cut the bottom and cover, and in their place to install two rounds of wood. Instead of cans, you can use a thin metal sheet and make 4 disks with an external diameter of 200 mm and 4 with an internal diameter. 170 mm from it. Using the bolts, connect small disks with large. Attach four knives to these discs from discs.

Since the knives should be easily rotated, when they are installed, it is necessary to observe between them and the disks of the gap of 1 mm. Nevertheless, it is necessary that all the mounts are reliable, so that when rotation or collision with random stones, the knives do not part. Drums are mounted on the frame, preliminarily you need to install bushings in them.

DIY frame. The equipment consists of the upper crossbar (10) and a metal strip with corners and backy bushes (16). For the crossbar, you can take a metal corner of 35×35 mm. The cylinders are interconnected by a belt, for the installation of which grooves 13 mm wide are drilled in the corners. For this, the lower sleeve of the leading drum is mobile fastened on the bar (15), and stretch corners (20) are installed on the upper axes of the cylinders. Tighting corners (20) is carried out to the ends of the transverse beam using the M5x65 mm screws. The drum belt is easier to make from the rubber strip, the ends of which are connected using a duralumin plate 2 mm thick.

Next, knit a mower with a power block selection shaft.

Rules for installing homemade equipment on a single tractor

Even if the mower is collected correctly, it still will not allow you to get the necessary result, if its connection to the power unit will be carried out incorrectly. When installing homemade equipment, certain requirements must be observed:

• translate the one.based tractor into a reverse mode;
• Any connection of the equipment to the power selection shaft is made by installing the connection unit in the hitch nest;
• fix the mount by means of a pitch with a spring. If the spring is absent, then this can cause the failure of the trailed mechanism;
• When installing it is necessary to close the knives with a protective casing;
• Speasing of the grass should start with small revolutions with the clutch coupling on;
• When working with a mower, all turns must be performed carefully without sharp movements, slowly.

Whatever type of equipment, rotary or segment, you prefer to your walk.behind tractor, for independent manufacture, the assembled device should be completely safe for the one who controls it and for others. Since the device works with fairly high speeds, with an unreliable attachment, a disc with knives, having broken, can cause a serious injury to you and others. Therefore, having decided to make such equipment with your own hands, you should weigh your strength well and decide if you have enough skills and experience for such work. It is possible to buy a finished device and save your strength and time better.