Assembling the cutters of the Brait 80 walk-behind tractor
single-axle tractor Brait BR-80
The Brait BR-80 walk-behind tractor is produced in Russia, which affects the availability of not only the model itself, but also the component parts for it.
Due to its budgetary cost and reliable power unit, the device is widely popular among consumers.
Description
The petrol uniaxial tractor Brait BR-80 is used privately by farmers for plowing the land, processing crops and transporting goods. This is possible due to aggregation with additional attachments.
- the single-axle tractor Brait BR-80 is equipped with a four-stroke single-cylinder engine with a capacity of 7 horsepower and air cooling. This motor is designed for long-term use and high loads.
- The milling width can be set from 80 to 120 cm for optimum performance.
- The transmission is made of high-strength metal and transfers torque to the attachment with minimal loss of power.
- The gearbox of the Brait 80 walk-behind tractor is made of cast iron of a large thickness and is able to withstand intense loads.
- The gearbox has 3 positions: 2 forward and one reverse.
Service
The manufacturer recommends refueling the Brait BR-80 uniaxial tractor with AI-92 or AI-95 gasoline. Fuel must be clean, fresh and free of sediment.
The frequency of changing the engine oil is chosen by the owner himself. If heavy work was carried out with a heavy load on the motor, then the lubricant must be changed after 25 hours of operation, if the device was used in a gentle mode, then the replacement can be done after 50 hours.
General information, purpose and features of operation
Brait BR 80 has been produced for a long time. Over the years of its production, many competitors have appeared, but despite this, the single-axle tractor in question is still relevant. The machine has a time-tested design that has been well studied by service technicians. The dealer network for the Brait BR 80 walk-behind tractor is widely developed throughout the post-Soviet space. At least in terms of this indicator, this model is not inferior to more recent counterparts.
The main advantages of the walk-behind tractor are its reliability, maneuverability, outstanding off-road capabilities, as well as suitability for a wide range of tasks. The machine can be used for soil cultivation in a variety of ways. For example, depending on the installed equipment, a single-axle tractor is capable of plowing and hilling the soil, planting and digging up roots and other vegetables, transporting goods, pumping water, forming beds, etc. a single-axle tractor is designed for any application that will satisfy the owner of the equipment And despite such extensive capabilities, the Brait-80 model is one of the most affordable in its price category. In addition, the single-axle tractor is developed from fairly high-quality imported components.
The disadvantage of the walk-behind tractor can be considered its basic configuration, in which there are no attachments. However, other competing motoblocks, including more high-class equipment, also sin with this drawback. On the other hand, the lack of hinged options can be considered an advantage. Firstly, this significantly reduces the cost of a single-axle tractor, and secondly, it allows the owner to choose the necessary equipment himself based on his needs.
This video review demonstrates the assembly process of the Brait BR-80 walk-behind tractor:
Alexei:
“I bought a single-axle tractor for processing my site and for 3 years there were no special problems with it. The advantages include low fuel consumption, if you do not overload the engine of 7 horses, which starts up very quickly. Sometimes it stalls, but it’s not scary. Corrosion has appeared on the bottom, but this does not affect its performance. “
Sergey:
“We carry out transportation of goods within our rural area only on a walk-behind tractor. At maximum load, the flow rate increases significantly, but in this mode the device is not always used. I bought the necessary attachments and, depending on the need, I use it. I carry out minor repairs myself. “
Vadim:
“Digging potatoes and plowing in the garden has become easier, while gasoline costs are only 1 l / h. Among the shortcomings. noises in the engine, tight clutch. I have been using the device for 3 years already, but there were no significant breakdowns. “
Attachments
As you know, Brait-80 has a primitive basic configuration, as befits a budget walk-behind tractor. But from the factory, he already has a lot of places for fastening various equipment, with which the machine turns into a full-fledged mini-tractor and cultivator. But as practice has shown, for the model under consideration, only certain attachments are in demand:
- Cultivator cutters
- Potato digger
- Potato planter
- Plow
- Tiller
- Ground hook
- Rotary / friction mower
- Snow blower
- Brush
- Shovel blade
With these options, you can unleash the full potential of the walk-behind tractor. Many people prefer to purchase a car immediately with attachments, since this allows the low cost of the product itself. The manufacturer recommends purchasing only branded options compatible with Brait-80. But as experience shows, some devices may well come up from other competing motoblocks. The manufacturer does not officially report this for obvious reasons.
Features of the Brait BR-80 walk-behind tractor:
- Equipped with a 7 horsepower engine.
- Has excellent cross-country ability on any ground, which is carried out thanks to a powerful engine and wide pneumatic wheels.
- a single-axle tractor is designed to perform a wide range of functions when using additional equipment. It should be noted that almost all known attachments can be attached to the presented model. On it you can not only plow the soil, but also huddle seedlings, harvest potatoes, pump water, and also transport goods.
- Three-speed gearbox makes it easy to maneuver in the field and handle even hard-to-reach places.
- Wide fenders protect the operator and power package from dirt and water lumps.
- During soil cultivation, the plowing depth can be increased up to 15 cm, and the width can be changed from 80 to 120 cm.
- Thanks to the modern 4-stroke gasoline engine, the single-axle tractor is quite economical and its consumption ranges from 1 to 2 l / h at maximum load.
Description
The petrol uniaxial tractor Brait BR-80 is used privately by farmers for plowing the land, processing crops and transporting goods. This is possible due to aggregation with additional attachments.
Power Barrow for walk-behnd tractor (2nd-generation type)
- The single-axle tractor Brait BR-80 is equipped with a four-stroke, single-cylinder engine with a capacity of 7 horsepower and air cooling. This motor is designed for continuous use and high loads.
- The milling width can be set from 80 to 120 cm for optimum performance.
- The transmission is made of high-strength metal and transfers torque to the attachment with minimal loss of power.
- The gearbox of the Brait 80 walk-behind tractor is made of cast iron of a large thickness and is able to withstand intense loads.
- The gearbox has 3 positions: 2 forward and one reverse.
Utility trailer mounting to walk-behind tractor
in Russia
Neva MB-1B-6.5, Yenisei MB-820, Superintendent GT 709 SK, Energoprom MB-820 and others.
The frequency of changing the engine oil is chosen by the owner himself. If heavy work was carried out with a heavy load on the motor, then the lubricant must be changed after 25 hours of operation, if the device was used in a gentle mode, then replacement can be done after 50 hours.
single-axle tractor Brait BR-80
The Brait BR-80 walk-behind tractor is produced in Russia, which affects the availability not only of the model itself, but also of the component parts for it.
Due to its budgetary cost and reliable power unit, the device is widely popular among consumers.
Features of the Brait BR-80 walk-behind tractor:
- Equipped with a 7 horsepower engine.
- It has excellent cross-country ability on any soil, which is carried out thanks to a powerful engine and wide pneumatic wheels.
- a single-axle tractor is designed to perform a wide range of functions when using additional equipment. It should be noted that almost all known attachments can be attached to the presented model. On it you can not only plow the soil, but also huddle seedlings, harvest potatoes, pump water, and also transport goods.
- Three-speed gearbox makes it easy to maneuver in the field and handle even hard-to-reach places.
- Wide fenders protect the operator and power package from dirt and water lumps.
- During soil cultivation, the plowing depth can be increased up to 15 cm, and the width can be changed from 80 to 120 cm.
- Thanks to the modern 4-stroke gasoline engine, the single-axle tractor is quite economical and its consumption ranges from 1 to 2 l / h at maximum load.
Description
The petrol uniaxial tractor Brait BR-80 is used privately by farmers for plowing the land, processing crops and transporting goods. This is possible due to aggregation with additional attachments.
- The single-axle tractor Brait BR-80 is equipped with a four-stroke, single-cylinder engine with a capacity of 7 horsepower and air cooling. This motor is designed for long-term use and high loads.
- The milling width can be set from 80 to 120 cm for optimum performance.
- The transmission is made of high-strength metal and transfers torque to the attachment with minimal loss of power.
- The gearbox of the Brait 80 walk-behind tractor is made of cast iron of a large thickness and is able to withstand intense loads.
- The gearbox has 3 positions: 2 forward and one reverse.
Alexei:
“I bought a single-axle tractor for processing my site and for 3 years there were no special problems with it. The advantages include low fuel consumption, if you do not overload the engine of 7 horses, which starts up very quickly. Sometimes it stalls, but it’s not scary. Corrosion has appeared on the bottom, but this does not affect its performance. “
Sergey:
“We carry out transportation of goods within our rural area only on a walk-behind tractor. At maximum load, the flow rate increases significantly, but in this mode the device is not always used. I bought the necessary attachments and, depending on the need, I use it. I carry out minor repairs myself. “
Vadim:
“Digging potatoes and plowing in the garden has become easier, while gasoline costs are only 1 l / h. Among the shortcomings. noises in the engine, tight clutch. I have been using the device for 3 years already, but there were no significant breakdowns. “