BOSCH Electric Coat how to change a fishing line for a trimmer. The cost of repairing trimmers Bosch*

Bosch Art 23 Easytrim Trimmer Trimmer

Trimmeres users, both gasoline and electric, sometimes have problems with the cord. “Advanced” Kosilov owners can easily cope with the difficulties, realizing why this is happening, and for beginners, this is a problem that does not have a rational explanation. But in fact, everything is solved quite simply. The most common problems that happen to the fishing line are the following.

Large cord consumption

Basically, the cord quickly ends if you often knock on the ground with a semi.automatic head or press it hard. The coil unlock occurs, and the fishing line for the trimmer, lengthening, is cut off with a knife. Another reason that the cord quickly ends is the improper operation of the device with an automatic head: the user during kosbe often drops engine speed. But as we recall, the automatic head is arranged so that it is with each reduction in the revolution that a new portion of fishing line is supplied, so it is quickly consumed.

How to remove and disassemble a coil

Before proceeding to the process of replacing the cord, users of trimmers need to remove and disassemble the coil. Consider how to do it.

The mowing head of a trimmer for grass consists of several parts: a casing, springs (not in all models), bobbins with a cord and cover.

Attention! Before proceeding with any actions to maintain an electric unit, it must be disconnected from the network. Trimmers most often use 2 options for fastening a mowing head

Trimmers most often use 2 options for fastening a mowing head.

Option

In this version, the head is twisted onto the gear shaft. To remove it, you need to fix this shaft. To do this, in such trimmers, for example, in the Huter and Champion devices, a hole is provided through which you can insert either a thin screwdriver or a metal rod.

So, to remove the bobbin, take 2 simple steps.

• Insert the screwdriver into the hole and stall the shaft.
• Take the head of the head and start twist it clockwise. It should be twisted in this direction for the reason that the thread cut on the shaft is left.

Cords of cord

If a trimmer fishing line is often torn, this can cause the following reasons:

• Stones, small branches and other hard obstacles come across the grass;
• The user mows the grass back to the fence, and if he is mesh, then this breaks the “antennae” even faster;
• poor quality of the cord (it is recommended to purchase high.quality);
• The output holes are worn out in a mowing head, which is why the fishing line for a trimmer is erased on the sharp edges of the bushings and breaks off (a complete replacement of the part will be required).

We repair an ethletric trimmer for Bosch grass.

This material will be a continuation of the post already published on the blog in which I told how I bought a trimmer ethletric for Bosch grass and literally after a short use of use it broke.

Now I will tell and show in photographic materials how to repair the “pimpochka” on the rotating part of the engine of this electrimmer. The weakest place in this unit, just the “pimpochka”, with which there is a compulsory renewal (throwing out) of the fishing line when it hit the surface of the soil, tonsured turf or another hard surface during a haircut.

A little backstory, just in case, for the new visitors of the blog After several haircuts (as much as I did not count), with the next renewal of the fishing line (stroke about turf), the “pimpochka” jumped out of the fixed hook on the stiletto and bounced so far that I had to look for it in grass.

Then I decided to publish a post about the unreliability of the electrimmer with this design of the Pimpochka and, by the way, saved many readers of my newsletter for many readers of money. But some subscribers have already bought such a “unit” and were upset that the material was published late, otherwise they would have never bought this trimmer for the grass.

Well, dear friend, I don’t know who and what he uses in his cottage or personal plot. I had such an incident with this electrimmer, and I hastened to tell about it. Who was lucky and they read that post before buying this model of a trimmer for grass, then saved! Who was not lucky. my fault is not here.

Nevertheless, there is a way out of this situation. this “Pimpochka” can be repaired and it is not so difficult and much cheaper than buying a new trimmer for grass. I suspect that the design features of this model were designed initially in such a way that in the case of a slight breakdown, it could not be repaired, and the purchase of a new trimmer for the grass was required, which brought and brings great profit to the manufacturer.

No, I in no case do not want to stipulate the Bosch company, it has almost the entire power tool of excellent quality. For a number of years I myself have been using a peorator and a screwed company Bosch and I am delighted with their uninterrupted and high.quality work. But in the case of the electrimmer, the designers still need to finalize all the nodes and parts so that they could quickly be repaired.

Now, in fact, to the matter.

After the “Boshevsky unit” broke down, I quickly bought an ethletric trimmer for the grass, because the grass cannot explain that, they say, not to grow up from me a trimmer for the grass is broken. The new trimmer cut grass on the site, and Bosch lay in the garage and dusted. How many heads I did not puzzle over his repair at home, or as they say “on my knee” now, nothing happened to me.

Then I decided to call my brother and ask him to think about the repair of this “pimpochka”. The point here is that the fishing line for a trimmer with a drum is freely fixed in the casing of a rotating site, as before. But without a hook with this “pimpochka”, a fishing line for a trimmer from the drum pops up (flies) spontaneously and it is impossible to cut it.

The brother agreed to help with the repair, and we brought him our poor fellow. After successful repairs, by making constructive changes in the attachment of this “pimpochka” to the rotating platform of the trimmer for the grass, I was able to use it and use it to this day. True, you have to update a fishing line for a trimmer, releasing the drum of their hook with the site.

Now read carefully and thoughtfully if you are going to repair such an unit. I will try to explain everything intelligibly in words and reinforce them with pictures, since I do not have rollers on this topic, as there is no cylinder drawing, with the help of which an e.it.aletric trimmer was repaired for grass. My brother did everything myself, I did not participate in the repair.

This is what the fastening of the “pimpois” assembly looks like.

This is how the hole with the gut in the head “Pimpochka” looks like.

In the photo below, the bolt with the gathering (secret head). The total length of the bolt is 8-10 millimeters. The shape of the hat should be just like that, because then the bolt itself does not protrude from the head and the height of the cut grass will be minimal.

If the bolt hat will even protrude several millimeters above the head, then this ledge will constantly cling to the soil and mowing will be very inconvenient. Since all the time it will be necessary to raise a trimmer for grass from one site, and move it to another, and pulling up vertically up and lowering it also vertically.

Whereas with such a bolt shape and its location flush in the Pimpochka head, the movement of the trimmer for the grass is glued to this very “pimpochka” along the grass horizontally. That is, the haircut will be produced as if a new trimmer for the grass.

Defective electric trimmers for grass

As already mentioned, manual electrical trimmers for supply grass can work from the network or from the battery. The former are limited in motion, and the latter are designed for a certain charge, that is, have time restrictions. In addition, existing devices are divided by the location of the engine:

• An electric trimmer for the grass of the lower trimmer for grass is automatically released from a rotating shaft or cable. As a rule, this design has low.power tools or batteries. The battery in this case is located on top to maintain the required balance.
• The upper lawn mower has great power. This design is better distributing the mass.

Removing and disassembling the coil

The braid trimmer head consists of a casing, a spring (not in every model), bobbins with a cord, cover. Before proceeding to disassemble the coil of the electric unit, be sure to turn off the trimmer for the grass from the network. The disassembly method depends on the mounting of the mowing head. First option:

• To remove the lid covering the inside of the head, click on the latches (latches), which are located on its two sides.
• Remove the lid under which you will see the spool. remove it from the body. Some trimmers have a spring under the bobbin coils, which should also be carefully pulled out.
• Removing the bobbin, you will see the screw in the center of the case. Unscrew it with a screwdriver.
• After extracting the fasteners, take the case body and, shaking it in different directions, remove the gearbox from the shaft.

In the second version, the head of the trimmer for the grass is twisted onto the shaft of the gearbox. To remove it, you need to fix the shaft. To do this, in such devices there is a hole through which a thin screwdriver or metal rod is inserted. Brief Instruction:

• Insert a screwdriver into a special hole, then stall the shaft.
• Get the body of the head and start twist it. This should be done clockwise, t. to. Larva shaft thread.

Types of trimmer heads

A mowing head for grass is a cylindrical case in which a coil (bobbin) is inserted with a fishing line in it (cord). This design can be installed both on gasoline and electric trimmer. The heads differ in the method of refueling and supplying the cord and there are 3 types.

• Automatic. The cord is supplied after the user reduces engine speed. Although the automatic supply of the fishing line is convenient if large volumes of work are performed, such rods have one drawback. a large thread consumption.
• Semi.automatic. Using this type of head does not require complicated manipulations from the user. The principle of their operation is arranged so that the cord is automatically lengthened at a time when the device works at full speed. It is enough to slightly hit the trimmer’s head for the grass on the ground (this removes the cord lock), and the fishing line for the trimmer, due to the centrifugal force, moves out of the bobbin, after which it is cut to the desired length with a knife located on a protective casing.
• Manual. For lengthening the cord, the device is required, after which the fishing line for the trimmer is handed out manually.

Based on the above, semi.automatic bobbins are the most optimal option. It should also be borne in mind that the coils for a trimmer for grass are one.built (used only to trim the grass) and two.string, which are used to mow high grass and small, with thin stems of shrubs.

Method 2. two segments

fundamentally no different from the method.The only difference is the two wound segments of the fishing line, instead of one.

There are two special fixing nests on the coil (see drawing above).

How to replace the fishing line for a trimmer in a mowing head, coil of the motorcycles Stihl FS 55

They hook it previously formed on the fishing line, and begin to wrap a fishing line for a trimmer.

Winding is carried out in a special order

The winding needs to be carried out in the following order: first the lower fishing line for the trimmer, t.e. that which is closer to the fixing holes at the bottom of the coil, and only then the upper one, t.e. the one that will overlap the lower section.

The tips are made in the holes of the corps of the rogue trimmer for the grass. They are pulled to a click, which means that the fishing line for the trimmer

The tips are torn into the holes of the corps of the rogue trimmer for the grass

The coil is fastened into the case. Lines for a trimmer

Preparation for the replacement of fishing line

Before replacing the fishing line, you need to pull out, and then disassemble the head. It usually includes a casing, a spring (on some models), a bobbin with a fishing line, a lid. It is necessary to turn off the electric trimmer for the grass (or drown out gasoline) from the network, and then proceed to remove the coil. It can be recorded in two different ways: in the first case, it is necessary to completely disassemble the head, and in the second. just remove the gearbox from the shaft, to which it is attached.

Find the latches on both sides, press and remove the lid to open the internal device of the head;

A bobbin is located under the lid, it must be carefully pulled out of the case (sometimes a spring is hidden under it, it should also be carefully removed to the side so as not to lose);

• After removing the spool, it becomes noticeable in the center of the case with a fixing bolt (or screw), which must be unscrewed in a direction opposite to the clockwise movement;
• After removing the fasteners, it is necessary to hold the body with a swaying movement to remove the coil from the gear shaft.

The second method involves the following actions. Coil head is worn on the gear shaft. To disconnect it, you need to lock this shaft. Typically, in braids, for example, the brand “Champion” or “Stihl”, for this a hole is made into which a nail, rod or screwdriver is inserted. After fixing the shaft in a fixed position, you need to, holding the body, start rotating the head clockwise, since the thread on the shaft is usually applied to the left.

Now that the head is removed and dismantled, it is necessary to determine what thickness the cord should be. You can find out the suitable diameter for your trimmer for the grass by looking at the user’s guide or on the squash itself, it usually indicates such information. Another way is to insert the thread into the hole from which it is served. If the Sruna is without difficulty, it can be used to work.

The dimensions of the fishing line

The diameter of the trimmer fishing line is the most important parameter of the mower. Indeed, in the working part of the tool there are holes of certain dimensions, and not every fishing line for a trimmer will crawl into them. If the line for the trimmer is selected incorrectly, then this leads to increased loads on the drive.

Consumable materials with a diameter of 1.4 mm to 4 mm are presented on sale. The diameter is determined by the model of the trimmer for the grass and its power:

• For compact units with a capacity of up to 1 kW, processing small areas, fishing lines with a thickness of 1.4-2.4 mm are recommended.
• Elektokos or trimmer for grass working on gasoline is equipped with thicker cords-2.4-3 mm.
• The most formidable devices that can clean large areas of the aboveground part of shrubs and young trees have a vein of 3-4 mm.

How to change a fishing line for a trimmer on a trimmer Bosch Easy

The main advantage of Bosch Easygrasscut 26 is compactness and low weight. The trimmer for grass is disassembled into several parts and placed in a very small box of 47x22x14 centimeters. That is, it can be easily transferred to a bag or backpack, but I liked it exactly once. when I carry a box for 30 seconds from a store to a car, it is always assembled in the country, although it is possible to whom it is important and important.

The trimmer is assembled for grass easily and in collected form it does not look like a toy no longer. The weight of a trimmer for grass is only 1.9 kilograms and this is a really excellent indicator. when working with it, you practically do not get tired.

Lower engine location, a protective plastic casing includes. everything is standard. Many complain that holes are clogged for ventilation and even put on a trimmed 5 liter bottle for protection. until this problem has been encountered

The engine power is 280 watts, the engine speed is 12500 rpm, as the index is in the name of the mowing width of 26 centimeters. A trimmer has been produced for the grass of course in China

As in my previous trimmer, a fishing line for a trimmer comes out only on one side of the coil, but if the Bosch Art 26 ComBitrim has an automatic bobbin, which allows you to quickly lengthen the trimmer fishing line just by pressing the ground to the ground, then this opportunity does not need to be pressed on the button on the coil. Trimmer fishing line in the kit is good, durable with diameter 1.6 mm, but only 4 meters long, but it is one, and there were two of them on the Bosch Art 26 Combitrim. ordinary and reinforced.

The handle is adjustable and convenient. there are no complaints about ergonomics

This model is not in vain called Easy. in the end it turned out to be a very light, but low.power and simple trimmer for grass that is easy to work, but it is not at all suitable for large areas and high grass. there is not enough power. It is intended exclusively for swinging, but in principle, for this purpose, it was bought with the cashbacks it turned out about 2 thousand. Given the characteristics and experience of using the Bosch Art 26 ComBitrim (more powerful and comfortable, although heavy), I can’t definitely recommend for purchase. Only if the main weight is for you and you will not mow grass on a large area, you can look at the model, in other cases, choose something more powerful.

We fill out a fishing line for a trimmer trimmer for grass.

I want to devote today’s article to the sore topic of summer residents and gardeners of the entire post.Soviet space “How to refuel a fishing line for a trimmer in a trimmer for grass”. Not many trimmers manufacturers in their operating instructions answer this question. Therefore, it is hard for ordinary gardeners to figure out how to do it right.

I want to start with a brief description of the technical characteristics of trimmers.

So, trimmers for grass are electric and gasoline. The cutting element of trimmers can be a fishing line for a trimmer and a knife. The fishing line for the trimmer is ordinary, four. Pyathedral and intertwined (in the form of pigtails). Knives are from 2, 3 and four lobed knife. Knives are also plastic and metal.

The system for feeding fishing line from a trimmer for grass is manual, semi.automatic and automatic.

Development engineers who create new models of trimmers clearly calculate the diameter (thickness) of the fishing line for the trimmer and the number of knife blades, according to the power of the trimmers. Otherwise, the engine is overloaded, which as a result leads to its breakdown. And these are additional and significant costs.

Today, the market is presented on the market: the grass:

With one nozzle. only Leskova. With two nozzles-Leskova and three-four-blade knife. With one nozzle-only a three-four-blade knife.

Our Kulibins have long learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacement of fishing line with a metal cable, or fishing fishing line for a trimmer. But at the same time, they do not think about the safety of their loved ones, because as a cable with the power of a working trimmer for grass can easily break out and not only injure the mower and others, but leave a cripple for life. The use of a fishing fishing line can and gives the best effect, I have never tried personally than a fishing line for a trimmer for a trimmer for grass, but such work has a number of inconvenience: when in contact with solid objects, it is located or may simply be pulled out of the reel.

So, what is called closer to the topic. I give an example of how to refuel a fishing line for a trimmer in a trimmer for grass (a trimmer for Bosch Art 30 grass). Everything is very simple. Started.

After you have chosen a fishing line for a trimmer for refueling, you need to cut off the required amount of fishing line, because, as the entire fishing line for a trimmer in a skein is not wound into a coil.

Remove the coil and a protective casing from the coil.

Removed. We fix one end of the fishing line in the gap and neatly and evenly wrap the fishing line for the trimmer.

The amount of fishing line should be so that the protective casing of the coil closes and the fishing line for the trimmer on the coil is slightly unwound.

The second end of the fishing line is seated in the hole on the protective casing.

Next, take the coil and the protective cover of the coil. We sit the end of the fishing line from the coil into a metal hole on the protective cover of the coil. Put a little fishing line for a trimmer.

We put it all on a trimmer for grass. Turn the coil clockwise to click.

Fastened. Now we connect a trimmer for the grass to the network. Put a trimmer for grass in the original position for work. We turn on a trimmer for grass. Excess fish length will be cut off on the trim blade.

Such a coil for a trimmer for grass is attached as well as a coil with an ordinary fishing line.

How an electric trimmer works for grass

When connecting the device to the network outlet, an alternating current socket is supplied, which is straightened and smoothed out by the built.in rectifier and capacitive filter. Runned circuit breaker supplies electricity to the stator winding and brush. An electric trimmer for grass is put into effect, and its rotor begins to rotate under the influence of an activating electromagnetic field.

If the engine is located on top, the rotating force is transmitted to the cutting tool through the shaft and gearbox. In the lower position of the engine, everything happens directly. As soon as the garden electric trimmer for the grass reaches the maximum speed, the operator can start work. High speed and small cross section of the cutting part are prerequisites for good cut.

Instructions with a step.by.step description how to wind the coil of a trimmer for grass and lawn mower

In order not to make a mistake with the choice of a suitable fishing line for your tool, you should first disassemble the head and look at the side wall of the coil. This information is usually presented on a tip, which will not allow us to make a mistake using the appropriate equipment.

If the information on the coil about what diameter the fishing line for the trimmer can be refueled, then this information can be clarified in the instructions. Having decided on the thickness or diameter of the equipment, it remains to figure out how to charge it. There are two ways for this, but not for all they are applicable. Consider both methods in details, and already depending on what models and trimmers you use, you are determined on your own which option is suitable.

It is interesting!The principle of how to wind a fishing line for a trimmer for a tip of motorcycles is appropriate not only for autonomous benzar groups, but also for electric trimmers.

Defective electric trimmers for grass

A mowing head for grass is a cylindrical case in which a coil (bobbin) is inserted with a fishing line in it (cord). This design can be installed both on gasoline and electric trimmer. The heads differ in the method of refueling and supplying the cord and there are 3 types.

• Automatic. The cord is supplied after the user reduces engine speed. Although the automatic supply of the fishing line is convenient if large volumes of work are performed, such rods have one drawback. a large thread consumption.
• Semi.automatic. Using this type of head does not require complicated manipulations from the user. The principle of their operation is arranged so that the cord is automatically lengthened at a time when the device works at full speed. It is enough to slightly hit the trimmer’s head for the grass on the ground (this removes the cord lock), and the fishing line for the trimmer, due to the centrifugal force, moves out of the bobbin, after which it is cut to the desired length with a knife located on a protective casing.
• Manual. For lengthening the cord, the device is required, after which the fishing line for the trimmer is handed out manually.

Based on the above, semi.automatic bobbins are the most optimal option. It should also be borne in mind that the coils for a trimmer for grass are one.built (used only to trim the grass) and two.string, which are used to mow high grass and small, with thin stems of shrubs.

The first way

To correctly determine how many meters of the fishing line are required for a specific coil, it is necessary to wind it on the bobbin so that the skein does not exceed the diameter of the sides. If the fishing line for the trimmer will look out beyond the edges of the coil, you cannot insert it into the casing. After you have decided on the length of the material, it must be tucked in a bastard, so do the following.

It is necessary to fold the fishing line for double so that one end is 10-15 cm longer from the other. Please note that the bobbin is divided into 2 parts by the central side, from which charging begins

Find a groove on it and insert a cord into it, bent twice, putting a slight effort

It is very important to determine in which direction the fishing line for a trimmer is wound on the reel. If you look closely, you can find an arrow on the bobbin or an inscription with an arrow indicating which direction the winding should be carried out

There are times when there is no arrow on the coil. In such a situation, you can look at the arrow drawn on a mowing head, and wind the cord in the opposite direction. Winding should be carried out carefully, a turn to the turn, with maximum thread tension. After laying the cord is completed, you will need to fix it first the short end of the fishing line, inserting it into the groove suitable in diameter on the side of the coil. The second end, the one that is more authentic, is attached into the groove on the opposite side of the squash. After fixing the fishing line, cut its ends, leaving the allowances about 10 cm. Next, it is necessary to install a refueling coil in a mowing head. To do this, alternately inserting and pulling the thread into the weekends of the head, place the bobbin in the casing, after which, by applying the required force, pull the fishing line for a trimmer from the fixing grooves and tighten it. Now you can put on the lid and fix it with the help of latches.

The cord is not served, the coil does not spin

Automatic or semi.automatic head should serve a fishing line for a trimmer without stopping the unit. But if it does not come out, then the reasons may be as follows:

• The fishing line for a trimmer in a coil is incorrectly wound, which is why the latter does not spin;
• The cord is wound unevenly, and the thread can get stuck between the turns (the thread should be wrapped neatly, the turn to the turns, without distortions);
• Too short ends of the threads come out of the holes, as a result of which there is not enough centrifugal force to extract them, and the fishing line is not supplied for the trimmer (it is recommended to always adjust the length of the cord before starting the unit, slightly pulling it up);
• The fishing line for the trimmer is sticking together (it will be considered later).

The structure of the inertial coils

Undoubtedly, in order to fix the coil, you need to represent its structure and the principle of operation. Without exception, all inertias gather in factory conditions from the same type of nodes, differing depending on the dimensions of the mechanism with their sizes. The main components are the following parts and details of the product below:

• frame;
• toothed drive;
• brake friction;
• rotor;
• renefter’s support;
• rear.direction switch;
• rogue mounting rod;
• Lesko.laid with an arc and a roller;
• gear with an arc.

Depending on the modification and the purpose of the inertia, or as it is also called fishermen, the meat grinder, it can be supplemented with a specific functionality inherent in a certain model.

How to unscrew the coil on the trimmer video

The most wear.long element in the design of a trimmer for grass is a fishing line for a trimmer. How to replace the coil with a fishing line with a cutting knife on a benzo trimer. The video is more useful for beginners. How to wind a fishing line for a trimmer to a trimmer coil for grass. photo and video as. Therefore, it is principle to know how to choose and wind it on the coil. All details in the article

How to change a fishing line for a trimmer in a trimmer and which one is better to choose

Since the choice of a trimmer for the grass we saw in the previous article, now we will tell how to correctly refuel a trimmer for the grass with a fishing line, and which is better to choose based on the criterion of work.

After you purchased a trimmer for the grass and began to use it intensively, at some point the question will arise about the substitution of the fishing line, since this is the most weary element in the tool, the rich operation of the trimmer for the grass will often lead to substitution of consumables.

There are fishing lines with advanced aerodynamics with appropriate dentes, scales and notches, a similar product makes less noise, but they use it only on benzos, since the output from the reel is difficult, it is used in most cases with discs, into which segments are inserted into which segments are inserted. This video is devoted to how to change the air filter on the trimmer (motorcycle) Husqvarna. The shortcomings of this product are its fragility.

Usually, the diameter that can mow young grass does not exceed 1.6 mm. I have on a similar trimmer how to remove a coil from a trimmer for grass, and the garden, meanwhile, overgrown. The thicker the thread, the more rough the grass it is able to overcome.

There are fishing lines with sharpened faces in the form of a sprocket or square, such an option is more adapted to mowing dry grass just due to the existing sharp faces, but it is more wear and tear and it is inferior in strength to the round cord.

Specifications

Initially, the fishing line for the trimmer was produced only a round shape, but other modifications soon began to appear. square, hexagonal, in the form of a star and others. They are still different in color, but the color does not affect anything, except for the visibility of cutting equipment during operation.

The shape of the string affects the type of mowing grass. In the shape of the cord there are:

• Round is a common form that is still considered universal. The round shape of the string is divided into smooth and with turns. If a smooth string is characterized by noisiness of work, then twisted on the contrary works quieter, but its accelerated consumption is observed
• Square and hexagonal. the presence of sharp corners provides a more effective cut of vegetation, which must be taken into account when processing large areas
• Ribbed and in the form of a star. even more effectively cut different types of stems, and reduce the load on the engine

Some craftsmen, when spent on the fishing line, replace it with a steel wire or metal string, which is unacceptable. The wire is not only capable of cutting the dense shoes of the roeer, but can also be wound on the head, which will lead to its jamming with the shaft. The jammed head will entail the wear of the gear ratio and the power unit.

Materials:

From point of view. hacksaw canvases should not be completely red.hot.

Everything that is needed for the manufacture of the nozzle

First you need to make the base of the nozzle. For this, from a metal plate

Cut the square with a side of 100 mm. You need to mark it in such a way that there is a hole exactly in the center (at the intersection of the diagonals). To do this, from the center of the selected opening perpendicular to the short side of the plate, we measure a distance of 50 mm and plan the trimming lines.

Cut the excess and get a square of 100 mm x 100 mm. Now it is necessary to twist the corners a little and drill the central hole for the shaft of a trimmer for the grass.

Twist the corners and drill the central hole for the shaft of a trimmer for grass

Cut the canvases for metal, measuring from each end 8 cm. We get 4 blanks with finished holes.

As a result, we get the knives of the same weight and size, they can be sharpened a little on one side. Now all parts of a home.made nozzle for a trimmer for grass are prepared, you can start assembly.

The end of the screw must be blown up so that the nut does not fly.

The nozzle is ready. It is installed by nuts to the ground and fixed in the same way as a three.lobed knife that comes with a trimmer. In a collision with a stone, the knives fold and go a little inside.

When working with a trimmer, it is important not to forget about safety precautions using any nozzles, and especially homemade. We offer to familiarize yourself with dry flowers: names and photos, descriptions of species and varieties

We offer to familiarize yourself with dry flowers: names and photos, descriptions of species and varieties

trimmer for grass Bosch Art 23 Fishing Law

In this review, I want to talk about the Bosch Art 23 SL electric trimmer purchased at the online trad.RU. I have been using a similar tool for about 15 years in a summer cottage. Used different models of other manufacturers. But Bosch bought a trimmer for the grass for the first time. I’ll tell you about my impressions.

A trimmer for grass is supplied in a proprietary cardboard box, which has an unexpectedly compact size and low weight. It is easy to transport it. you can even just put in a large plastic bag that offers online trad.ru when buying, and convey in a package. This is what the box looks like from different sides.

The box indicates the main characteristics and features of the trimmer for the grass. I will call the main. Power 280 watts. Weight 1.7 kg. The diameter of the overwhelmed spot is 23 cm.

Inside the box there is a trimmer for grass with a disassembled condition, a protective casing, a fastener (it lies in a bag, which is talked on tape to the casing), a set of paper documentation. Everything is packaged reliably and neatly.

Among the documentation there is a thick book. It mainly contains rules for the safety of working with a trimmer. The procedure for assembling and preparing a trimmer for the grass for work is not described, but there is a series of detailed pictures at the end of the book.

It’s easy to figure it out for them, even if there is no experience.

But nevertheless, I want to talk a little about the order of assembling a trimmer for the grass. I also note that the book also has a list of accessories for the trimmer: cartridge, fishing line for trimmer and protective glasses. To them are given numbers by which you can accurately choose to replace.

We will return to the cartridge and fishing line later.

So, pull out a trimmer for grass from the box. It consists of three parts folded.

These parts cannot be separated by each other, since the wire passes inside the bar. Remove rubber traffic jams at the ends of the bar. They are needed to transport a trimmer for grass in a folded state. Collect a trimmer for grass and snap stop buttons. I note that collecting a bar is easier than then to disassemble. For disassembly, you need to drown the buttons and disconnect the rods again. Be careful. do not damage the wire. No need to use force. If only a little in dosed quantities.

Now you can remove the cardboard on the handle of a trimmer for grass. And fix the network cord as shown in the photo. Such a mount is useful, since the loop on the cord will prevent damage to the cord from grinding and if you sharply pull the cord.

The trimmer for the grass is launched by pressing the red button on the handle of a trimmer for grass. To work, it must be kept in a pressed position. The button is not tight. it does not require it to hold it. At the same time, the button cannot be pressed by accident. Ergonomics of the pen is well thought out.

Next, you need to fix the protective casing at the bottom of the trimmer for the grass. It is inserted into special grooves and rotated by about 90 degrees. Then it is fixed with a screw that is supplied in a bag on the casing.

Finally, you need to remove the protective layer of tape from the knife on the casing. This knife automatically cuts out (aligns) a fishing line for a trimmer after being pulled out of the cartridge and launching a trimmer motor for grass.