Honda mower oil amount. General Equipment Company Blog

Answer: Check According to the Honda Developed Procedure.

Note: This eHelp! only applies to the General 330H, 343H and 357H Hole Digger powered by the Honda GXV140 and GXV160 engines!

Filling the engine crankcase with oil will require a level working platform of sufficient size and appropriate height. As an alternative, the transmission driveshaft can be securely in a suitable bench vise.

CAUTION: Running the engine with insufficient oil can cause serious engine damage.

Need help?Call us at 800.533.0524, oremail: support@generalequip.com.

Steps below to check oil level.

• Do not check oil level with the engine running!
• Place the Hole Digger on a level surface.
• Wipe any dust or dirt from the crankcase dipstick/filler plug area.
• Remove the oil filler cap/dipstick and wipe clean.
• Insert the oil filler cap/dipstick into the oil filler neck as shown, but do not screw it in. Remove it to check the oil level. FIGURE 1.
• If the oil level is near or below the lower limit mark on the dipstick, fill with therecommended oil to the upper limit mark, DO NOT OVERFILL. FIGURE 2
• Screw in the filler cap/dipstick securely. Wipe off any excess spilled oil. Properly dispose of any spilled oil.

WARRINING: Failure to follow correct procedures can give an inaccurate oil level reading.

The correct oil capacity for the Honda GXV160 engine is.65 Liter or 23 US fluid ounces. Refer to the Owner’s Manual supplied by Honda for additional information including type and weight. Service related problems as a result of improperly filling the engine with oil are NOT covered by the Honda warranty program.

To download the Honda Owner’s Manual, (for the GXV160 engine), type or copy and paste theURL: http://engines.Honda.com/pdf/manuals/31ZE6030.pdf into a browser.

If you have any questions or Комментарии и мнения владельцев, please feel free to contact us. Telephone: 800.533.0524 | Email: support@generalequip.com

Leave a Reply Cancel reply

You must be logged in to post a comment.

Honda mower oil amount

The Honda GX390 is a popular engine that is used in several different applications. However, if you are the new owner of one, you may need to know how much oil it takes and what kind of oil to use. We did the research to bring you the answer.

The Honda GX390 engine requires 1.16 quarts (1.1 liters) of oil. The type of oil that should be used in this engine is 10W-30 motor oil. Consumers should change the oil every 6 months or 100 hours, whichever comes first.

In order for your Honda GX390 to perform at its best, it is important to use the correct type and amount of oil. If you still have some questions about this small engine, don’t worry. In this post, we’ll discuss the topic in more detail. In addition, we’ll answer other frequently asked questions about the Honda GX390 engine, so keep reading!

How Much Oil Does The Honda GX390 Engine Need?

The Honda GX390 engine can be found in a variety of applications, such as generators, pressure washers, and water pumps. Like any engine, oil is required for proper lubrication and cooling. The Honda GX390 engine takes 1.16 quarts (1.1 liters) of oil.

A general rule of thumb is to change the oil every 6 months or 100 hours, whichever comes first. However, if you use your Honda GX390 engine in dusty or dirty conditions, you may need to change the oil more frequently.

It is important not to overfill the oil, as this can cause damage to the engine. If you find that your Honda GX390 is smoking when starting, then that is a sign that too much oil has been added.

Even if you don’t use your Honda GX390 engine often, it is still a good idea to change the oil at least once a year. This will help to prevent any buildup of debris or sludge that can occur over time.

Oil degrades over time, so it is also important to use fresh oil. If you are unsure of how old the oil is, it is best to err on the side of caution and change it.

How Do I Know If My Honda GX390 Engine Is Low On Oil?

If your Honda GX390 engine is low on oil, you may notice some of the following symptoms:

• Engine runs louder than usual.
• The engine produces more smoke than usual.
• The engine is harder to start.

If you notice any of these symptoms, check the oil level as soon as possible. If the oil level is low, add more oil until it reaches the full line on the dipstick.

It is also a good idea to check for leaks. If you notice any oil leaks, have them repaired as soon as possible. By keeping your engine properly lubricated, you can help to ensure that it runs smoothly and efficiently for years to come.

What Type Of Oil Should I Use In My Honda GX390 Engine?

The recommended oil for the Honda GX390 engine is 10W-30 motor oil. This type of oil provides the best protection for your engine, even in tough operating conditions.

If you are using your Honda GX390 engine in a cold climate, then you may want to use 5W-30 oil instead. This type of oil is thinner and will flow more easily when the temperature is cold.

It is important to avoid using oils that are not designed for engines, such as hydraulic oil or transmission fluid. These oils can damage your engine and void your warranty.

If you are still unsure of what type of oil to use, consult your Honda GX390 owner’s manual.

Does Oil Viscosity Matter In A Honda GX390?

Just like vehicle engines, small engines need the right oil viscosity to run correctly and efficiently. But what is the oil viscosity, and why does it matter?

Oil viscosity is a measure of how easily the oil flows. The higher the viscosity, the thicker the oil.

Thinner oils are typically used in cold weather because they flow more quickly and can provide better protection for engine parts. Conversely, thicker oils flow more slowly and are better suited for warmer weather.

For example, if you have a generator equipped with a Honda GX390 engine and start it in sub-freezing temperatures, you will want to use an oil with a lower viscosity.

However, if you are starting your generator on a hot day, you might prefer an oil with a higher viscosity.

Can You Use Synthetic Oil In A Honda GX390 Engine?

Yes, you can use synthetic motor oil in your Honda GX390 engine. First, however, you should check your owner’s manual to see what the manufacturer recommends.

In general, synthetic oils flow more easily than conventional oils and can provide better protection for engine parts in extreme temperatures.

They flow more easily at lower temperatures and can provide superior protection against wear and tear. Synthetic oils can also help prolong your engine’s life by keeping it cleaner for longer.

Whether you use the engine a lot or a little, synthetic oil can help to keep your Honda GX390 engine running like new.

How Do I Change The Oil In My Honda GX390 Engine?

Even though the Honda GX390 engine can be found in different types of equipment, the process for changing the oil is generally the same.

• First, you will need to locate the oil drain plug and remove it. Be careful not to lose the washer that is attached to the plug. Once the plug is removed, allow the oil to drain into a catch pan.
• Next, you will need to remove the old oil filter. To do this, you will need an oil filter wrench. Once the old filter is off, wipe any debris from the mounting surface.
• Now you can install the new oil filter. Be sure to use a new washer on the drain plug and screw it back in.
• It is now time to add the new oil to the engine. First, check your owner’s manual for the recommended amount and type of oil. Once the oil is added, start the engine and check for leaks. The oil level should be checked when the engine is cold and on a level surface.
• Finally, start the engine and let it run for a few minutes. This will help to distribute the oil evenly throughout the engine.
• Once the engine has been running for a few minutes, shut it off and recheck the oil level. Add more oil if necessary.

If you are not comfortable changing the oil yourself, you can always take it to a local dealer or mechanic.

How Often Should I Service My Honda GX390 Engine?

In addition to changing the oil, it is important to perform other routine maintenance on your Honda GX390 engine.

The frequency of servicing will depend on how often you use the engine. However, as a general rule of thumb, you should service your Honda GX390 engine every 6 months or 100 hours, whichever comes first.

If you use your engine in dusty or dirty conditions, you may need to service it more frequently.

Some of the things that should be done during service include:

• Cleaning the air filter.
• Checking the spark plug.
• Checking the fuel filter.
• Checking the oil level and quality.
• Checking for leaks.
• Lubricating moving parts.

If you are unsure of how to service your Honda GX390 engine, consult your owner’s manual or a local dealer.

By following these simple tips, you can help to ensure that your Honda GX390 engine runs smoothly for years to come.

What Are Some Signs That My Honda GX390 Engine Needs Service?

There are a few signs that may indicate that your Honda GX390 engine needs service:

• The engine is making unusual noises.
• It is vibrating more than usual.
• The engine is producing more smoke than usual.
• Finally, the engine is harder to start.

If you notice any of these symptoms, it is good to take your engine to a mechanic or dealer for service.

Final Thoughts

As you can see, the Honda GX390 is no different from any other engine because it needs proper care and maintenance to function correctly. That includes regular servicing, using the right oil, and checking for leaks.

Hopefully, this article has provided you with the information you need to make sure your engine stays happy and healthy. By following these simple tips, you can help to ensure that your Honda GX390 engine runs smoothly for years to come.

Made it to the end? Here are other articles we think you’ll enjoy:

Should You Power Wash Your Garage Floor?

July 12, 2021

What Wall Color Goes With Gray Tile In The Bathroom?

June 24, 2022

What Is The Standard Preparation Hole Size For A Door Knob?

April 20, 2022

STIHL Rotary Saw Not Starting – What To Do?

December 30, 2021

Onan 5500 Generator Won’t Start – What To Do?

January 13, 2022

How Much Oil Does a Lawn Mower Take?

Manufacturers such as Troy Bilt make lawn mowers in both residential and commercial versions ranging from small to big. On top of this, you can buy a Troy Bilt with an engine from Briggs Straton, Honda, Kohler, or even their own. This huge selection of lawn mowers can make it challenging to work out how much oil your mower needs. So, where do you start when trying to work out lawn mower oil capacity? Well, let’s take a look at where you need to look to figure out how much oil to put in your lawn mower.

How Much Oil Does a Lawn Mower Take? (The Short Answer)

Lawn mower engines vary in size and power. The oil requirement differs depending on the specification of the engine. There isn’t one specific volume of oil that suits all lawn mower engines. Oil requirements can range from 15 oz to 70 oz, depending on the lawn mower’s oil capacity.

Oil Capacity is Not Universal: It Varies According to the Type of Mower You Have

Oil capacity all depends on the specific engine. Lawn mower manufacturers, product names, and model numbers are not enough to work out the capacity. For example, Briggs Stratton is a huge engine manufacturer that provides engines for several big-name lawn mower manufacturers. They have 5 engines in their range with 32 total variations that have 5 different oil capacity requirements. Now, if you wanted to include their sister company, Vanguard, which also makes lawn mower engines, this number would nearly double.

So, if you add all the manufacturers, lawn mower types, and engine variations, you end up with hundreds, if not thousands, of different lawn mowers. As a result, there’s a vast range of different oil capacities and not one universal answer.

Here’s the Briggs Stratton engine range to give you an idea of the number of engines they manufacture and how the oil capacities vary.

Briggs Straton Engine Range

The Easiest Way to Know How Much Oil to Put in Your Mower

The first thing you need to know when it comes to figuring out how many quarts of oil does your lawn mower take is the name and model of the engine. Most engines will have the manufacturer’s name and the specific model number printed directly on the engine. Once you have this information, you can either search directly on the manufacturer’s website or in the manual if you still have it.

Usually, when you buy a new lawn mower, you’ll be provided a manual for the actual lawn mower itself and one for the engine. If you happen to buy a mower like a Toro, a manufacturer that makes both their mowers and engines, the oil capacity could be in the same manual. But Toro also uses other manufacturers’ engines, so the engine’s oil capacity could be in a separate manual.

Basically, find the printed information specific to your engine since things can easily become very complicated.

How to Make Sure You Add the Right Amount of Oil to Your Mower (Step By Step)

Once you get hold of the correct information on how much oil goes into your lawn mower, it’s time to either top it off or give it a complete fill depending on your situation.

As you use your lawn mower, the oil degrades. The oil will burn off during this period and need to be topped off. Once a set period has passed, the oil will need to be changed. The period of how often to change your lawn mower oil can vary on several factors, including hours of use and how hard the mower has been working.

The common factor between topping off and oil changes is that the oil must be filled to a specific level at all times. Here are the steps you’ll need to follow to make sure you fill the engine with the right amount of oil.

Adding Oil to Your Lawn Mower the Right Way

Regardless of whether you are topping off or filling the engine from dry, the method used is the same. So, grab the following tools and parts, and let’s get started.

Tools Parts Needed to Add Oil to Your Lawn Mower

Locate the Dipstick

The first step in checking your oil is to check the oil level. The level is checked using the same method regardless if it’s low or empty. So, located on the engine is an oil dipstick. Some lawn mowers have an individual dipstick, and some have a dipstick as part of the filler cap. So, if you can’t find the dipstick, take a look inside the oil filler cap.

Remove Clean the Dipstick

After you have found the dipstick, remove it from the engine and give it a wipe-down. You want to use your shop cloth and remove all the oil from the end of the dipstick so that it’s ready to test the oil level.

Replace the Dipstick

Take your clean dipstick and place it back into the engine. Now, some engines require you to replace the dipstick completely, and some want you only to replace it until you feel resistance. So, I’d recommend that you have a look in the manual and check what your engine requires.

Remove the Dipstick Check the Oil Level

The next step is removing the dipstick. Pull the dipstick out of the engine, being careful not to touch the end of the stick on anything, as this is where you need to check.

If you take a look at the bottom of the dipstick, you’ll see some markings. Low and full. If you are topping off,the oil should sit between these two marks. For you guys who are filling the engine from dry, you won’t need to check the dipstick at this point.

Adding Oil to the Engine

Once you have researched how much oil your push mower takes or how much oil your riding lawn mower takes, it’s time to fill or top off your engine. So, take your funnel and begin to pour the oil into the oil filler.

If you are filling your engine from dry, then I’d recommend that you fill 75% of the capacity. So, if your engine needs 20oz, fill it with 15oz, then check the level. For you guys who are topping off, just add 1oz at a time. It’s much easier to add oil than it is to remove it. So, take it nice and slow.

Check the Oil Level Fill as Needed

Once you think you have 75% of the engine filled, check the oil level using the dipstick the same way you did when you first checked the level. Now, add more oil in single oz fills. Doing it this way is going to avoid overfilling. Repeat this process until the dipstick reads between the low and full marks. You should be aiming for closer to the full level, but definitely not over.

Run the Engine

Before you put the tools away, you should run the lawn mower for a couple of minutes. This pushes the oil around the engine getting into all the different areas. If you have just changed your oil filter, this process will help fill it up.

After the mower has been running for a while, switch it off and let it cool down. This allows the oil to settle back in the bottom of the engine so you can get an accurate level check.

Re-Test the Oil Level

Once the engine has cooled down, recheck the oil level. You’ll probably find that the level has gone down and the engine needs more oil. This is because the oil found its way into all the nooks and crannies of the engine when you turned it on. So, if you need a little more oil, add it the same way as before.

Why Adding Exactly the Right Amount of Oil is Important

Keeping an eye on your oil level is a job you should do every time before you use your lawn mower. There are telltale signs when you use a lawn mower with low oil and when using a mower that has been filled with too much oil. Here’s what you should look out for.

Problems with Overfilling Engine Oil

• Engine Seal Damage
• Engine May Overheat
• Engine Might Lock Up
• Engine May Not Run Well and Blows Smoke
• Engine May Blow Gaskets

Problems with Under Filling Engine Oil

About Tom Greene

I’ve always had a keen interest in lawn care as long as I can remember. Friends used to call me the lawn mower guru (hence the site name), but I’m anything but. I just enjoy cutting my lawn and spending time outdoors. I also love the well-deserved doughnuts and coffee afterward!

Leave a Reply Cancel reply

Copyright © 2010. 2023 LawnMowerGuru.com, All Rights Reserved.

Affiliate disclosure: As an Amazon Associate, we may earn commissions from qualifying purchases from Amazon.com. You can learn more about this here.

What Type of Lawn Mower Oil Should I Use

kurhan/Shutterstock

Your lawn mower needs the right kind of engine oil used in the right way. Read on to learn about different lawn mowers and the oil they need.

Our editors and experts handpick every product we feature. We may earn a commission from your purchases.

Why Lawn Mower Oil Matters

Like all internal combustion engines, lawn mower engines need oil to run. Even simple engines have many moving parts, often designed to work at extremely high speeds and temperatures. This is why the lubricating and cooling action of oil is essential. Without it, your lawn mower’s engine would quickly overheat, seize and be ruined.

Lawn Mower Oil Types

Motor oil comes in different grades, based on viscosity and how the oil behaves at different temperatures. Most mowers have what are called four-stroke engines. This means they burn straight gasoline as it comes from the service station pump, but they also require motor oil to be added separately to the crankcase of the engine. 10W30 is a common motor oil grade suitable for many lawn mowers. Your owner’s manual will tell you the exact grade required, but in almost all cases 10W30 is the right stuff for a four-stroke engines.

Any brand of oil that’s suitable for cars or trucks will work fine in your mower. All reputable oil includes a service rating in addition to a viscosity rating. Look for oil that’s designated SF, SG, SH, SJ or higher.

• Single Grade Oil: A single grade level oil typically without additives to change its viscosity and represents only at higher temperatures (100°C).
• Multi Grade Oil: A multi grade level oil that uses additives to provide better viscosity at a range of temperatures.
• Synthetic Blend Oil: A mixture of regular and synthetic oil with additives to help perform at colder temperatures without the cost of a full synthetic oil.
• Full Synthetic Oil: An artificially created lubricant with a wide range of benefits designed for use in high performance and commercial engines

Some lawn mowers have two-stroke engines, and these require oil in a different way than four-stroke engines. All two-stroke engines burn gasoline and oil at the same time. In the case of lawn mowers, two-stroke engine oil is mixed with the gasoline before it goes into the tank. Mixing ratios of gas to oil vary, but usually range from 30:1 (4-1/4-oz. of oil to one gal. of gas) to 50:1 (2-1/2-oz. of oil to one gal. of gas). The owner’s manual for your lawn mower lists the mixing ratio of gas to oil.

Two-strokes are becoming less common because of emissions regulations, but they’re still around. How do you know if you’ve got a two-stroke or four-stroke engine in your lawn mower? Your owner’s manual is the best source of guidance.

How to Choose the Right Lawn Mower Oil

Family Handyman

Some experts say that more expensive “small engine oil” is the only type of oil you should put in your mower with a four-stroke engine, but that’s not true. Standard engine oil made for cars and trucks is the highest quality available today and it works optimally with all four-stroke engines. Got a two-stroke engine? Any two-stroke motor oil made for air-cooled engines, such those in chainsaws, water pumps and weed eaters, will work perfectly in your two-stroke lawn mower engine.

• SAE 30 Oil: Engine oil best suited for warmer temperatures. Try top rated Pennzoil SAE 30 Motor Oil.
• SAE 5w-30 Synthetic Oil: Synthetic mower oil good for warm and cold weather use. Try top rated Castrol Edge 5W-30 Full Synthetic Motor Oil.
• SAE 10w-30 Synthetic Oil: Synthetic oil that can help in colder temperatures. Try top rated Mobil 1 Advanced Full Synthetic 10W-30 Motor Oil.
• SAE 15w-50 Synthetic Oil: Synthetic oil typically used for high end and commercial engines. Try top rated Mobil 1 Advanced Full Synthetic 15W-50 Motor Oil.

The best way to mix gas and oil for a two-stroke engine is to put the required amount of oil into your empty gas can, then go to the gas station and fill it up. Before using the mixed gas, give the can a shake to so the oil and gas are properly mixed.

What is Synthetic Oil and Should I Use It In My Lawn Mower?

Synthetic oil is superior to lubricants made from crude oil, and your lawn mower engine may last longer if you use synthetic. Essentially, it is a synthetic lubricant made up of chemical compounds designed to give engines the performance and protection that natural oil may not be able to provide. According to Briggs and Stratton, one of the world’s largest manufacturers of small engines, the use of synthetic oil does not alter required oil change intervals. Regular, non-synthetic oil works well, too. I’ve used non-synthetic in some of my small engines for 30 years, and these motors still start and run as if they were new.

How Often to Check and Change Lawn Mower Oil

Only lawn mowers with four-stroke engines have oil that can be checked and changed. Tuning up a lawn mower at least once a season, which includes changing the oil, is essential for maximizing fuel economy and extending the life of the engine. Aside from that:

If your four-stroke engine lawn mower is new, change the oil after the first three to five hours of use. As parts of a new engine wear initially, the internal movement of parts releases tiny metal filings into the oil that will cause excess wear if left there.

• Walk-Behind Mowers: Change oil in mower at least once a season or every 50 hours of use.
• Riding Mowers: Change oil in mower at least once a season or every 100 hours of use.

The owner’s manual for your lawn mower lists the amount of oil required, but you’ll do fine following the dip stick or oil level mark that’s part of every four-stroke lawn mower engine.

How to Check Lawn Mower Oil

Before each mowing session, you should check your lawn mower’s oil level and top it off if necessary. To do so:

• Place your lawn mower on a level surface and let it sit idle for a few minutes so that the engine oil can settle.
• Remove the oil cap and wipe the dipstick off with a clean cloth. Put it back into the oil tank and tighten the cap.
• Once again, remove the cap and check the oil level on the dipstick. The level should fall between the “full” and “add” marks. There may be differences in the appearance of these marks depending on the brand of mower you own. Some dipsticks may have only two holes to indicate “full” and “add”, or a cross-hatched pattern. Either way, you want the oil level to be between the two holes or marks. As close to the “full” side as possible without exceeding it.
• Whenever more oil is needed, add it in small increments and repeat this process between each addition to prevent overfilling the engine.

How to Change Lawn Mower Oil

When looking to change the oil in a lawn mower, follow these steps to check off this simple and easy maintenance check.

How Much Oil Does a Mower Take?

Depending on the make and model of lawn mower, push mowers have an oil capacity ranging between 13-1/2-and 22-ounces and riding mowers between 48-and 64-ounces. A mower’s operator’s manual will always list the proper amount of oil recommended for its engine.

What Does SAE Stand For in Oil?

SAE is the acronym for the Society of Automotive Engineers. They are an organization that sets global standards in a variety of fields related to transportation and aerospace. It is the responsibility of the SAE to ensure that automotive oil is standardized throughout the world.

Can You Use Car Oil in a Lawn Mower?

Yes. As previously stated, engine oil made for cars and trucks is the highest quality oil on the market and it works optimally with nearly all four-stroke engines.

Steve Maxwell is an award-winning content creator who has published more than 5,000 articles, shot countless photos and produced video since 1988. Using his experience as a carpenter, builder, stone mason and cabinetmaker, he has created content for Mother Earth News, Reader’s Digest, Family Handyman, Cottage Life, Canadian Contractor, Canadian Home Workshop, and many more. Steve lives on Manitoulin Island, Canada with his wife and children in a stone house he built himself. His website gets 180,000 views each month, his YouTube channel has 58,000 subscribers and his weekly newsletter is received by 31,000 subscribers each Saturday morning.