How much line to reel on the Stihl trimmer reel

How to thread the line into the Stihl trimmer spool

How do I load the line into the trimmer spool? Video instruction

The guaranteed output of the factory trimmer refueling will inevitably require a line change. Having a very rough idea of ​​how to thread the line into the trimmer reel without the help of others, the newcomers are reluctant to take up this business. How to wind the line on the trimmer reel, how to thread the line into the trimmer reel. Autocut for stihl fs 55 trimmer line threading into the trimmer reel 2 part line winding on. But with some abilities, mastering this simple science does not present any difficulties, and the similar annotation presented below will greatly facilitate this process.

Coil with one working tendril

The simplest option and uncomplicated sequence of actions:

Stihl X Line Versus Stihl CF3 Pro Verse Oregon Platinum Gator Line

  • The dimensions of the reel and the length of the original factory winding determine the recommended length of the line for winding. 2. 5 m.
  • One end of the line is inserted into the fixing technological hole located inside the spool.
  • The fishing line is wound on the drum in the opposite direction of the spool rotation on the trimmer product. as a rule, on the inside of the reel, an arrow indicates in which direction the winding is carried out.
  • A small section of the line is left free to bring it out. it is fixed in a specialized groove on the inner side of the bobbin, designed to hold the winding when assembling the bobbin into working condition.
  • The left end of the line is passed through the hole in the outer part of the reel.
  • The bobbin halves are assembled and put on the trimmer bar.

We carry out the winding of the fishing line

Automatic line winding on a spool

There is a type of reel in which the automatic mechanism winds without the help of others. from the user it is enough to just fill the line correctly. How do I load the line into the trimmer spool? Video instruction. How to remove the spool from the trimmer? How to wind the line in order to tuck the line. The fishing line is passed through a hole on the inside of the body, its antennae without winding are threaded through the hole on the outer body, the reel is assembled, and when the winding button is rotated, the fishing line is wound from the inside without the help of others. In such a spool, it is unrealistic to make the winding wrong: the mechanism itself will determine the correct direction, since it can only rotate in one direction.

The warranty production of the factory trimmer refueling will inevitably require line replacement. Having a very rough idea of ​​how to thread the line into the trimmer reel on their own, beginners are reluctant to take up this business. However, with some skills, mastering this simple science does not present any difficulties, and the similar instruction presented below will facilitate this process as much as possible.

Preliminary preparation

First, to wind the fishing line, you need to remove the spool (bobbin, spool) from the trimmer. certain actions will depend on the complexity of the configuration and the type of the product itself:

  • small electronic trimmers with a working position of the motor and coil at the bottom usually have side buttons on both sides of the bobbin. When pressed at the same time, the upper part of the reel, together with the inner content for winding the line, is detached, while the lower part remains on the trimmer. It is better to parse the bobbin on a flat, smooth place so that the spring included in the structure does not jump out and is not lost;
  • electronic and gasoline trimmers with a curved shaft without the ability to install a knife, usually have spools with a special wing: in similar designs, hold the spool in a fixed position with one hand, and turn the locking reel on the shaft with the other wing nut counterclockwise. How do I fit the line into the trimmer? How to thread the line into the trimmer spool. It is clear how to load the line on the trimmer. After disconnecting the nut, the entire bobbin is removed.
  • electronic and gasoline trimmers with the ability to install a knife on a straight bar (for example, Stihl trimmers) have a hole under the reel. For the rod to remain stationary, a screwdriver or other suitable object is inserted into this hole, and with unhurried rotation, such mutual placement is achieved when the screwdriver goes inside the hole and the bobbin is fixed. After that, the coil body is scrolled clockwise (with a left-hand thread) and removed from the trimmer.
READ  How to Repair a Starter on a Trimmer Wizard

For the second and third options, the coils, depending on the design, are disassembled by different methods. In bobbins with a lamb, a lamb is turned inside out, in coils with latches, the latches are pressed and one part of the coil is released from the other. How to fill the line in how to properly cheap line. 2. On your site. If the halves of the bobbin are connected by thread, then it is enough to turn them by hand in the opposite directions until they are completely unscrewed.

Coil with two working tendrils

In this type of spool, you should determine the number of grooves for winding the line, lying on the inside of the spool:

  • one groove. both antennae are wound together in one groove;
  • two grooves. each antenna is wound on an individual groove.

For both cases, a line with a length of 2-3 m is taken.In single-groove reels, the line is pulled into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the opposite direction of rotation of the bobbin on the rod side. inside the arrow usually indicates the correct direction of winding. If there are fixing grooves, the ends of the fishing line are threaded through them or held with the fingers of the free hand, they are threaded into the through hole of the outer half of the bobbin, the spool is closed and attached to the trimmer bar.

The difference in line winding in double-groove spools is that initially a 2-5 m long line segment is folded in half (to determine the middle fold), and the fold loop is inserted into a special groove between the grooves. Both antennae of the fishing line are wound each along its own groove, fixing the antennae and assembling the coil is similar to the above option with one groove.

The first execution of this procedure, perhaps, will seem long and rather laborious, but with time and experience this task will be solved much faster and easier.

The video below will clearly show how to thread the line into the trimmer spool and wind it correctly. this operation is not difficult and with some patience it will certainly be crowned with success:

Coil with one working tendril

The most common option and easy sequence of actions:

  • The dimensions of the reel and the length of the unique factory winding determine the recommended length of the line for winding. 2. 5 m.
  • One end of the line is inserted into the fixing technological hole located inside the spool.
  • The fishing line is wound on the drum in the reverse rotation of the spool on the trimmer product direction. usually, on the inner side of the bobbin, an arrow indicates in which direction the winding is being carried out.
  • A small section of the fishing line is left free to bring it out. it is fixed in a special groove on the inner side of the bobbin, created to hold the winding when assembling the bobbin into working condition.
  • The left end of the line is passed through the hole on the outside of the bobbin.
  • The bobbin halves are assembled and put on the trimmer bar.

Preparing the trimmer spool for winding

Initially, as a rule, the coil is installed to the head of the device itself. The coil consists of two parts. a cover and a spring.

  • Whichever company you have a trimmer, the preparation steps are the same for all types. Disassemble the device, or rather, remove the coil from the trimmer head. To do this, press the latches located on the sides of the head body until it stops, and turn the head clockwise.
  • To open the mowing head without any problems, press the side latches, if you cannot do this with your hands, use a flat screwdriver to help. We take out the coil from the head.
  • In order to choose the right line for your equipment, on the inside of the reel, digital designations must be applied, which indicate the thickness and type of acceptable line. All designations are indicated, as a rule, in millimeters.
  • If you did not find any numbers, then the maximum allowable diameter of the fishing line can be determined by the through hole for inserting the fishing line. The line should run smoothly back and forth.

A couple of tips

If the line was wound correctly by you, then when you press the bobbin button, the cutting element should be automatically pulled out. The line for your mowing device is one of the most important elements, without which the trimmer can lose all its functionality. You could say that the line (cutting element) is the heart of your mower. Therefore, when buying a fishing line, pay attention to its quality first. When purchasing a fishing line of this or that company, be sure to compare it with the quality of the old fishing line.

The process of winding the line on a reel

  • After all the preparatory steps, we need to correctly determine how exactly the fishing line will be washed on your device, by turning the lid or in the opposite direction.
  • We measure out about 7 mm of cutting material and insert it into the hole of the bobbin with one end. It is worth noting that the line is wound exactly on the model of style mowers from both sides. The direction of winding the line in such models is indicated on the bobbin itself.
  • The line is brought out to about 17 cm freely so that weeds can be cut off with the ends. We add that it is not worth winding the line on a reel of great length. Leave a distance of about 5 mm from the line to the edge of the bobbin.
  • The two ends of the line are inserted into the holes in the bobbin. Both of these ends must be securely attached to the device body.
  • The springs removed from the coil (if any) are inserted in the same way as they were removed, i.e. into the bobbin and the head body itself.
  • To determine if you have correctly inserted the line into the trimmer, you need the element itself (bobbin) to be easily inserted into the head body of your device. If necessary, pull the free ends of the line outward. To achieve this, you need to pull the line out of the groove with a sharp movement through the holes in the bobbin.
READ  How To Use A Stihl Chainsaw

So, let’s say you figured out how quickly, and most importantly, to correctly wind the line on the Stihl trimmer reel. All that remains for you is to insert everything correctly into the grooves and fix the main cover to the device. Then you can press on the bobbin itself and make counterclockwise movements until you feel the stop. If you do not feel the emphasis, then most likely you have not tucked the line correctly and you will have to start everything from scratch.

How to thread the line into the Stihl trimmer spool

The trimmer is one of the most common tools that you can use to quickly and easily cut grass, small shrubs, lawn grass and other weeds. It’s not a secret for anyone that in order for the mowing of grass to be successful, it is necessary to use the tool correctly and correctly handle individual cutting elements.

In trimmers, it doesn’t matter what fuel they run on, special cutting attachments (knives, discs) are used, and some trimmers are supplied to the market in the heads of which such a cutting element as a fishing line is installed, and therefore many are wondering how to fill the line into the Stihl trimmer coil if there are no skills as such.

  • Cutting attachments in the form of knives can be sharpened, but the fishing line (also cutting elements), but tends to be consumed. Below we will talk about how to properly thread the cutting element into the Stihl trimmer spool. fishing line.

articles

What can be used instead of fishing line

much, line, reel, stihl, trimmer
  • If instead of a special cutting element, say a fishing line, you install a metal cable, then your trimmer can “turn” into a real dangerous weapon not only for you and your eyes, but for all the people around you nearby. This is due to the fact that while the trimmer is in operation, the steel cable will constantly work, which will lead to entanglement, and small pieces of it can scatter on all sides with great speed.
  • The same can happen if you use copper wire instead of a steel cable, but in this case the pieces of separation from the copper wire will be slightly larger and can cause you even more injury. And if God forbid, you accidentally catch such a cutting element on the leg, then after that a deep cut in soft tissues is 100% guaranteed, and in some cases, all this can lead to amputation of small limbs (fingers) of the legs and even hands. Therefore, our advice to you, do not use any other cutting elements, except for the fishing line, for your own safety and those around you.

How to wind the line on a trimmer spool: winding methods and video

Any garden owner knows how quickly weeds can fill an area. A trimmer will help to defeat them without undue effort. This incredibly useful device is an indispensable tool for trimming and mowing grass.

It is no secret that an ordinary lawn mower cannot be used everywhere. In contrast, the trimmer can handle even very difficult areas. This is especially true for those tools in which the cutting element is not a knife, but a fishing line.

How to insert line into the trimmer?

There are 2 common ways of winding the cutting line around the trimmer reel, depending on the type of mowing head. To choose the right method, you need to study the design features of the spool. this will help you understand how to quickly and easily insert the cutting line into the trimmer spool.

much, line, reel, stihl, trimmer

How to reel fishing line?

Many anglers, in the process of preparing spinning tackle, are faced with a common problem: how to correctly.

How to catch more fish?

  • Single string. In the modification of such a trimmer there is only one working line. This unit is used mainly for small jobs, such as trimming the grass.
  • Two-stringed. They can be both automatic and semi-automatic. The package here includes two strings. This trimmer is used for mowing and clearing areas.

Instructions for correctly winding the cutting thread onto the trimmer spool:

How to Rewind the Spool on the STIHL AutoCut® C 6-2

  • First of all, you need to disassemble the head. To do this, press the latch and turn the cover to the side. Next, the spool is removed.
  • Measure out the required amount of cutting thread and insert it into the slot.
  • Wind the line on both sides in the direction of the arrow.
  • Leave the ends 15 cm long uncoiled.
  • These ends fit into opposite slots.
  • Then the ends are fixed in the hole on the head.
  • After that, the spool is carefully inserted into the body, for this you need to slightly press on it.
  • If necessary, you can pull the remaining ends of the thread out. To do this, first pull one end of the thread, and then the other so that they can easily pass through the slots on the head.
  • Now you need to collect the grooves on the body and screw the cover.
  • Then press the spool and try to twist it all the way. If you hear a click, the spool has clicked into place.
  • Next, you need to pull the free ends of the thread to the end.
READ  How to Sharpen a Knife From a Trimmer

Trimmer head with automatic line threading

Trimmer head types

Some models on the market have a reel with an automatic winding mechanism. It is enough for the owner to properly thread and fix the ends in the head, and the winding operation will be performed by the tool itself when it is turned on. It is almost impossible to wind the line incorrectly in a trimmer with such a head, since the coil independently determines the position of the antennae. The advantages of an automatic trimmer head include ease of threading the line, and the disadvantages are frequent breakdowns of the mechanism due to the complexity of the design and high cost.

Winding the line to the trimmer

Measured and accurate dismantling of the spool from the spit coil makes it possible to go directly to the winding of the line. The design features of the head, the number and location of the fixing holes dictate the sequence of actions when performing this operation, and also determine the methods used. Today there are several types of reels, depending on the number of line antennae and the methods of threading it:

  • Trimmer head with one working mustache;
  • A bobbin with two line tendrils;
  • Auto winding reel.

Threading the spools with thread of different types of bobbins

With two-string automatic heads:

  • First you need to press the clamp until you hear a click, remove the cover.
  • Rotate the spool carefully so that it can detach from the holder. Extract her.
  • Measure out two lengths of cutting thread of the same length. To make further work easier, the ends of the line must be cut off at an angle. Take one end and push it into the special hole in the coil. It can also be slots, grooves, clamps, etc.
  • Further, in the direction of the arrow, you need to wind the fishing line, and quite tightly and evenly. It is necessary to fix the end of the fishing line in a special eyelet on the reel.
  • Subject the other half of the line to the same operation, only on the other half of the reel.
  • Next, install the coil into the trimmer head. And thread the rest of the line through the hole in the head.
  • Then carefully straighten the thread and close the lid. If the line turns out to be long, then it is better to cut off the excess. There should be about fifteen centimeters left on each side.

On the semi-automatic head:

  • The thread is threaded through the hole that is inside;
  • Fix the ends of the thread in the grooves on the body.
  • The coil is assembled and a special button is pressed;
  • After which the line itself begins to dangle in the right direction.

It is necessary to very carefully and carefully thread the cutting thread into the unit, because not only the cleanliness of the garden area, but also personal safety depends on the correct winding of it.

How to wind the line on the trimmer spool. the first way

For heads of the first type, the dividing edge between the upper and lower compartments has a recess and does not close into a ring.

The fishing line is wound on such reels in the following order:

  • First you need to cut a 6-meter piece of cord from the common turn. The resulting segment must be bent in half. As a result, one side of the line should be 15 cm longer than the second;
  • Further, the cord, in the place of its bend, will need to be inserted into the recess provided on the edge between the upper and lower compartment of the coil. As a result, one part of the cord should be in the upper, and the second. in the lower compartment of the head;
  • Then you need to start winding the cord onto the trimmer. This should be done exclusively in the direction shown by the arrow on the reel. In this case, the cutting line should not be intertwined, and its lower and upper parts should be wound into the corresponding sections of the spool. After that, 15 cm of free cord should remain in each compartment;
  • In the upper compartment of the reel there are recesses for fixing the fishing line. The ends of the cord must be inserted into these recesses. as a result, they must be located opposite each other;
  • The operator must then assemble the mowing head and place it on the trimmer.

How to Rewind the Spool on the STIHL AutoCut® C 26-2

Before using the lawn mower, the operator must extend the free ends of the cutting line so that they are taut. This ensures that the line feeds evenly from the spool when mowing grass, without delaying the operator.