How to choose a gasoline vibration pile for a home. Why are such devices intended

Choose a vibration plate: electric vs gasoline

Vibration fuels are indispensable where it is impractical or impossible to use large machines, for example, during the construction of a private house. In the article we will talk about gasoline and electrical vibration stages (site vibrators). Although among professionals the latter have not been in demand for a long time, ordinary consumers continue to show interest in them because of their affordable cost. But whether it is justified and whether it is worth choosing between electric and gasoline models?

Electric vibration stations. Unfortunately, they are very rigidly attached to the source of energy, and therefore limited in use. if there are no electricity on the site or interruptions with its supply are possible, such vibration fuels become completely useless. They can only work where there is the possibility of a reliable connection to the network. when carrying out landscape work on a personal plot, for trammeling paving slabs or for work in the room. In addition, such a vibration plate due to relatively small weight is designed only for tamping of sand or light soil to a depth of not more than 250-300 mm.

Gasoline vibro.fuels do not have such restrictions. they can work anywhere, both indoors and open construction sites, used in the repair or laying of the road surface in small areas, where the traditional asphalt rink simply will not be able to maneuver. With the help of gasoline vibration fuels, you can trim any, even complex soils.

Due to its versatility, a gasoline vibro-plate is much more profitable and more functional than electrical, moreover, its use will cost cheaper-the cost of electricity exceeds the cost of gasoline.

Design features of gasoline and electrical vibration pages

The principle of operation of both gasoline and electrical vibration plate is to supply vibration to the surface with the help of eccentrics, fixed directly on the plate itself. When the engine is launched and the set of working revolutions, the centrifugal clutch is turned on and the rotation of the eccentric (debalan) shaft begins. It is this shaft that creates the vibration of the foundation plate.

The design of both types of vibration fuels is relatively simple and consists of the following elements:

• Supporting. the main part of the machine. It should have a mass enough for efficient operation, optimal working surface and high wear resistance. The quality of the seal depends on the mass and area, and at the same time they significantly affect the weight of the vibration plate. Typically, the working platform is made of sheet steel with a thickness of 8 mm, specialized rental or cast iron with special additives to give it more elasticity. If the vibration plate is used to lay paving slabs, a special rug made of rubber or polyurethane is put on its sole. The workplace is usually enhanced by stiffeners and has rounded edges to give smoothness to the movement.
• Eccentric. This is the element that creates vibration. It is a shaft with a shifted center of gravity, the principle of action of the eccentric resembles the principle of action of the flywheel. its movement around the circumference makes the trim slab vertically move. When the eccentric passes through the lower part of the circumference, the effect of pressure occurs, and along the upper part. upward movement and horizontally forward, which gives the vibration to the ability to move along the surface. It is from the movement of the eccentrik that noise arises during the operation of the unit.
• Engine. It is he who is the main constructive difference between gasoline and electrical vibration pages. The force depends on it, which allows you to move the vibrating plate on the surface. The more powerful the engine, the easier and faster the plate moves, the higher the performance of the unit will be. Most electrical vibration fuels are installed by engines with a capacity of 0.25 to 1.5 kW. In gasoline devices, there are usually much more powerful engines, which means it is easier to work with them, and the area of ​​a compacted surface in the same time will be much larger. In addition, the operation of the electric motor will cost more than his gasoline counterpart (we have already talked about this earlier).

With the similarity of most of the structure, the gasoline plate still has significant advantages over the electrical primarily due to the engine power.

Which is most important when choosing a vibration plate? First of all, quality. After all, no one wants to pay for the tool that will work for one year, and the next one will already refuse to turn on. The next list includes high.quality models that not only last for a long time, but also allow you to quickly tamp the soil.

Zitrek Z3K50

Budget option for those who do not want to spend a lot of money on the purchase of vibration stages. At the same time, the low price did not affect the operational qualities of the device. Ease of use is ensured by the control lever located on the handle.

Using the oil sensor, the owner will know exactly how many lubricant mixture remains in the crankcase and whether it needs to be changed. The drive belt is reliably protected from mechanical exposure thanks to a special casing.

• Can be conveniently moved around the site due to the presence of the wheel.
• Shock absorbers reduce the load on the handle and the motor.
• The ability to easily control the amount of the remaining lubricant mixture due to the oil sensor.
• Compact.

TSS TSS-WP60L

The model is great for rammed and bulk soils, including sand and crushed stone. It can be used not only for landscape, but also road construction work. With the help of gasoline vibration plate, the owner will easily prepare the foundation and ram the tracks.

The powerful engine engine has high reliability and is resistant to breakdowns. Low gasoline consumption is provided due to the direct injection system.

• It works quietly enough.
• Excellent maneuverability even when driving on narrow space and clay soil.
• The device can be used for a long time without harm to health due to the low level of vibration.
• Simple management.

VP-35 Huter, 74/6/1

This gasoline vibrating plate will cope with the sealing of sand and gravel. It can also be used to build roads and create foundations.

Excellent performance is provided by a powerful engine. The operator’s hands will be a minimum load due to the low level of vibration.

• Small dimensions allow the device to drive between close buildings in the summer cottage.
• There is an oil drain hose.
• Low.soured engine, so it will not distract the owner from work with loud sounds.
• Perfectly trim the small and large fraction.

Elitech PVT 60BVL

High performance allows the use of a vibration fuel not only in civil, but also road construction. It is convenient to use thanks to an ergonomic handle.

Modest dimensions make it possible to easily tamp the soil in small territories. Conveniently located tank will allow the owner to easily refuel the device.

• High performance makes it possible to quickly complete the work in the summer cottage.
• Stylish design.
• Will serve for a long time thanks to the assembly of excellent quality.
• Fast launch.

DDE VP90-SK

In the manufacture of gasoline vibration fuels, quality materials were used, so it will last a long time. It installed a reliable Loncin G200F motor.

The handle has a system of extinguishing vibration, reducing the load on the hands of the operator. If necessary, protect the processed surface, the owner can attach a rug.

• There are wheels that facilitate the movement of the device.
• Low vibration level.
• The model is easy to master due to intuitive management.
• Solid power.

Champion PC1151FT

If you have to compact sand, gravel or paving stones from stone, then this model will be a great choice. The modest size of the vibration plate makes it very maneuverable.

An important plus of the model is that its handle only vibrates slightly. Therefore, even after a long use, the operator will not feel fatigue in his hands.

• The drive belt is covered with a casing that protects it from damage.
• Easily rolls on the ground thanks to convenient wheels.
• Small dimensions.
• Reliable and durable one.cylinder motor with air cooling.

Patriot VT-100LB

The model has a powerful four.stroke motor, allowing it to move at a speed of 20 m/min. The tank is located on the upper part of the vibration plate, so the owner will be able to easily pour gasoline into it.

The design of the model provides a hose that supplies water to the tamped soil. Due to this, the effectiveness of the sealing of the site increases.

• The rounded base of the device simplifies access to the corners of the rammed surface.
• The drive will not be clogged with sand or earth, as it is closed by the case.
• The handle can be removed, so when stored, the unit will not take up a lot of space.
• It is convenient to move along the ground thanks to two wheels.

Champion PC9045F

High reliability and power of the model allow it to be used as professional construction equipment. The throttle control is located on the device handle, which greatly facilitates the operation of the operator.

To protect the vibration fuel from corrosion, the manufacturer applied special paint on its case. There is a loop in the protective frame with which you can catch the model and move using a lifting mechanism.

comparison table

To make it easier to choose a gasoline vibration, we recommend paying attention to the next table. It indicates average and the most important characteristics of the previously considered models.

Design and principle of operation

All modifications of the tampings have a similar design. It includes several main mechanisms:

Sole. the main working body of the device. For high.quality tamping, the shoe must have optimal indicators of weightyness and wear resistance. The working platform is made of cast iron or steel. Making various additives to the alloy allows you to increase the resistance of the plate to mechanical loads, increase its wear resistance.

The vibrator includes a debalase shaft installed in special supports. The principle of its work is similar to the flywheel. The design also provides a frame for mounting a motor and a handle with which the operator controls the unit.

The principle of operation of the equipment is simple. when it is launched, the engine is gaining working turnover, after which the centrifugal clutch is turned on, and the debalase shaft begins to rotate. It creates vibrations that are transmitted by the working platform of technology. Due to oscillatory movements and weightyness, the shoe affects the processed material, contributing to its compaction.

Modern models

Vibrram gasoline vibrors are convenient in work, maneuverable and compact compared to electric or diesel units. Thanks to a significant set of advantages, such equipment is in great demand.

Below are the most popular models of gasoline vibration fuels with an optimal ratio of assembly quality, cost and functionality.

• Champion PC1645RH. Production device with a 4-stroke engine with a capacity of 9 liters. With. The technique is universal because it has the possibility of a direct and reverse passage. Its advantages include the quiet operation of the motor (Honda GX270), economical fuel consumption, convenient management.
• DDE VP160-HK (American development, the assembly of which is carried out in China). Equipment with a reverse function equipped with a Honda GX200 engine with a capacity of 6 liters. With. Allows you to compact the soil up to 50 cm in 1 passage. The equipment is reliable and durable due to the equipment of the rotor of the vibrator with reinforced bushings.
• Zitrek CNP 25-2. Czech.made trafficer. Equipped with the Chinese engine Loncin 200f 6.5 liters. With. The unit provides for a direct and reverse move. Equipment platform is made of durable cast iron. The model is distinguished by budgetary, ease in management. The disadvantages include a small depth of seal. no more than 30 cm.
• Mikasa Mvh-R60e. Small Japanese Tram as a 69 kg. Equipped with a Subaru EX13 engine 4.5 l. With., maximum torque 8.1 nm. It has a return function, equipped with a built.in water tank, so that the unit is allowed to be used when laying the asphalt canvas. The disadvantages of the model include its high price.
• Redverg RD-C95T. A Chinese-made vibr-trafficker weighing 95 kg, equipped with a 4-tacte gasoline engine Loncin 200f with a capacity of 6.5 liters. With. Seal depth 30-35 cm. The device provides a system of irrigation, which allows you to work not only with loose, but also with bitumen materials. The disadvantages of the model include the absence of a reverse passage.

Domestic manufacturers offering reliable vibrors are included by TSS company. Everything manufactured under this brand has a strong case that protects the internal nodes of the device from mechanical damage, the penetration of construction waste. The technique has a low level of vibrations, which simplifies its operation.

Types of vibration fuels and their price

By operational mass, all vibration stations are divided into the following types:

• Ultra.light (less than 75 kg). not suitable for asphalting, but can be used in laying paths from paving stones or other small landscape works. These are amateur cars that can compact soil with a thickness of not more than 150 mm.
• Light (75. 90 kg). are considered universal, as they are already rallying a layer of 200. 250 mm thick, and therefore are actively used in laying large volumes of paving slabs and in the dimple repair of the roadbed.
• Medium (90. 140 kg). are able to compact a layer of up to 300 mm, are used in reverse filling of foundations, layer.by.layer compaction of road bases. Models of this category are no longer suitable for laying tiles.
• Heavy (more than 140 kg). Machines whose weight exceeds 200 kg are suitable for the definition of industrial equipment, as they are actively used when taming large layers of any type of soil, gravel, and other bulk materials on construction sites.

Trailed

You can turn on any vibro.accumulator that is unable to move independently, but requiring a separate driven device.

We are talking about models that drag a tractor, truck or other suitable equipment.

Hinged

Used, as a rule, as a hinged equipment of excavators.

These are hydraulic vibration stations, that is, those powered from the standard hydraulics of construction equipment, have a rotary hydraulic motor, have large dimensions of the trim base and weigh more than 500 kg (more often than 1 ton).

Deck

Rearranged from place to place of lifting equipment.

Self.propelled

Fully independent models collected on a steel base controlled by the operator.

The latter of the above vibration fuel are the most widespread, and in turn they are:

• Non.reversible. exclusively direct.flowing models that are preferable to operate in places that allow you to perform a turn. Another name is one.way vibration pages, since they are able to carry out only progressive movements in one direction.
• Reversing. can move both forward and backward, that is, it is a direct and reverse machines. Most often we are talking about options weighing more than 100 kg, which increases their mobility.

In addition, such a vibration plate is actively used in places with limited space, for example, trenches.

Electric

The lowest options, but at the same time the least expensive.

Such machines are tied to the network, and if you plan to carry out work far from the source of electricity, it is better to immediately purchase and the corresponding generator.

However, for field conditions, such models are simply inappropriate to buy.

As a rule, this is a paving vibration plate, the capacity of which will simply not be enough to perform serious work.

Minimum prices. about 18. 20 thousand. rubles.

Gasoline

The most popular due to simplicity of maintenance and operation options.

Among the advantages, one can note the average price category and irreplaceability when working in hard.to.reach places.

Models can be equipped with four.stroke engines with various power indicators.

Average, there are copies and for 20 thousand.

Diesel

Have high operational characteristics due to all the advantages of the diesel engine, which is installed, as a rule, on the most difficult models.

These are the most expensive vibration stages, because the majority among road services and construction companies are common.

.

In addition to classic self.propelled models with a folding handle to control traffic, vibro.shields with remote control are made, which allow the operator at a safe distance from the place of work.

NOTE:

Road vibrating plate, designed to compact asphalt and bitumen mixtures, necessarily goes with a tank into which water is poured. This is necessary so that the material does not stick on the base of the apparatus, which implies periodic wetting of this surface. There are models with water supply in automatic mode, which greatly simplifies the workflow. Such a system of irrigation is driven by turning the crane.

In addition to buying a factory vibrational machine, its fully fully option can be made from a walk.behind tractor, or rather, based on its engine.

The simplest vibrors for concrete can be assembled from the penetrator, equipping it with a nozzle with a flat rectangular or square base.

What is the difference between the vibration plate and the vibrors?

The main differences between the vibration stove and the tamping is:

• Volume of work. Vibroophytes are basically suitable for performing work of any complexity and volume, and are often used where the operation of large.sized trams is inappropriate. Vibrogram is used to perform light sealing work.
• The role of man in the process of work. The vibrating plate requires only human control in the process, while the tamping must be constantly kept in an upright position.
• Work in difficult places. In this indicator, vibrors wins, as it has compact size, and most importantly. a small trim surface.
• There is no need to clear space under the vibration, and it does not take up much space.

Simply, then the difference lies in the fact that the area of ​​the working surface of the vibro.trams is much smaller than that of the vibration stations, and therefore the first is taken to deep places with a small surface, and the latter for wide and long areas.

I share my experience with a vibrating plate. How to choose? Where to get? What to look for?

I share my experience with a vibrating plate. How to choose? Where to get? What to look for?Last fall, he finished the blind area and parking with a natural stone. It was necessary to trigger large areas with crushing and gravel.Buy a vibration fuel for these works is very expensive. Plates cost from 50tr and above. And it is not required often and, in principle, for the self.builder this option will never pay off.Some make vibrrams with their own hands. This happens in cases where there is no construction point of the construction tool in the settlement and the nearest district, and the main details for the construction of the device of the vibrating plate, there are and hands from where it is necessary. This option is also not very suitable for me. Since there are no details, I would have to buy everything, but there is just there.

over, I live in the vicinity of a large industrial city and we have rentals in every area. And the presence of competition allows you to select a rental item at the most acceptable and conditions. And I was lucky. In the area of ​​the city, through which we enter, we go to the city, there is just such an office and the rental conditions are convenient. For example, you can take a vibrating plate for a couple of weekends, and pay like for one working day. And you don’t have to go far, everything is comfortable, on the way to my site.There were three options for which stove were three. Conditionally: “cheap and angry”, “cool in quality, but moderately in price” and “very powerful, hard and expensive”. I chose the average option. It turned out to be the Wacker Neuson 2050 plate, which is called “honeycomb” in colloquial. This platform weighs about 100 kg. In order to bring it, you do not need to order a manipulator, you can simply immerse your car into the trunk. At the same time, it is powerful enough to punch a thick layer of bellows and minimize the number of aisles in one place and thus reduce the working hours. Therefore, I did not take the lightest and slightly cheaper plate.For the day of working with this stove, I pull for myself three obvious moment: 1. If you are not very limited in time or the site is not large, then it makes no sense to take too heavy the plate. There are enough hundreds, if there is an opportunity to drive one section 3-5 times and break through a depth of more than 50 cm. In some places, “400” can slip or sink in the ground. And you can’t take it on yourself. It is necessary to order delivery. And with maneralism at the “hundred” everything is in order, easy to hammer in the corners.2. If the plate begins to jump, the surface underfoot vibrates in the beat of the plate, like an overlap, and traces on the ground from passage are almost invisible, then this shows that everything has already made it good. I still had a wilting. And after 4. 5 drives, after the stove, drops of water began to be released. The effect of pushing moisture is noticeable.3. If you correctly calculate the work and give the plate to the stove at a minimum, very decent areas can be loosened in a day. But, I was humane, I was noisy up to 19h and again began in 9. A total of about 9 hours.

Rating of high.quality vibration stamps with diesel drive

This type of equipment is poorly started in frost, and the functioning process is accompanied by a noise. However, among the main selection criteria that the buyer pays attention to first of all, there are such aspects:

• Independence from external power sources.
• High operational period.
• High degree of reliability.
• Simplicity in management.

Husqvarna LG 204 D 500 mm

A popular product from time.tested Swiss brand. For most people, this concern is known as one of the best manufacturers of motorcycles. Including the manufacturer is assembled by the assembly of garden equipment, and vibration fuel in particular. One of the best products from which side cannot be seen, except that the price bites. However, the cost is more than justified due to the durability, multifunctionality and reliability of the tool. The engine is not installed the most powerful (4.3 liters.With.), but the impact power of the product is 38 kN, which is considered a more than high indicator.

The declared speed of rotation is 3,000 revolutions per minute, and the depth of ramp 40 cm. Indicators are not the highest, but allow you to work in high loads. Ergonomics deserves special attention. The handle is mobile, so it can be adjusted to any growth. The manufacturer applied a complex innovative system of extinguishing vibrations, which will be appreciated by those operators who had to work with equipment of this type.

How much is the kit? Buying will cost 420,000

• ergonomics;
• build quality;
• vibration damping system;
• hardy engine;
• professional model;
• durability;
• practicality.

Shatal PC-2014D

If necessary, the model can be ordered online directly from the manufacturer’s website. First of all, when describing a product of their own production, manufacturers make Accent on the most important, in their opinion, criteria. A feature of the design is considered to be a pre.installed (unique) system of extinguishing vibrations. The parameter is no doubt important, since the convenience of using the equipment as a whole depends on it.

A high vibration indicator will make the operator the operator, which means a short. All the company, without exception, work on the solution of this problem, but they have not yet been able to realize the engineers of Shatal. The stove functions without complaints, however, according to users, the point is not in the length of the sole, but on the average engine power. The vibration was reduced due to the flexible connection of the tubular handle to the base. Here the manufacturer had to donate the assembly quality.

• a unique system of extinguishing vibrations has been applied;
• duration of work;
• Ease of use;
• the ability to replace individual components;
• ramp 25 cm of the surface in one pass;
• High.quality engine judging by the photo offered by the brand.

Zitrek CNP 330A-3 AES

Characterized by the presence of the latest control system. Country. Product manufacturer. Czech Republic. On the territory of the country, it is considered an unspoken leader in the production of high.quality vibration stages and other garden and production tools equipped with diesel drive. A model worthy of consideration, which will become a practical solution to the problem. Among the same products has an acceptable price tag. What is it due to is not clear.

The declared technical characteristics are beyond praise. Installed engine with a capacity of 13 liters.With., and the possibility of tamping material up to 1 m deep. The impact force reaches the mark of 40 kN. Within an hour of continuous operation, the unit will process over 650 square meters of the site. The indicators are high, compared with models of a similar price category. Top was rightfully in the top, but many are embarrassed by a high indicator of power. The design is high, even for laying asphalt. There are not so many cases in which the use of a particular model is needed.

What are the vibration stages for?

The main purpose of the vibrating plate is the tamping of bulk materials. Exposure to the surface is carried out due to the flat metal bottom of the large mass, on which the vibrational effect is carried out. Weight paired with vibration allows you to easily trim the loose surface.

Equipment is used both when laying the foundation and in the improvement of garden paths. The vibration plate is indispensable in the repair of the road surface, the tamping of paving slabs and in other cases when you need to quickly and efficiently compact a loose base.

Vibrooper rating for paving slabs

Tiles are used not only in urban improvement, but also when laying garden paths. The technique for its tamping should be quite easy and with a system of extinguishing excess vibration.

Wacker Neuson MP12

Compact construction equipment with a weighing of 64 kg copes with bulk crushed stone and sand, mixed and dense soils, as well as with paving slabs and stone. A feature of the model are its small dimensions that allow you to use the plate in narrow places of the summer cottage.

Wacker Neuson DPS 1850h Basic

The universal vibro.plate for tiles, sand and paving stones is equipped with a water tank, supports the force of an 18 kN strike and is able to process up to 660 m2 for an hour. The mass of the model is 114 kg. For interaction with paving slabs, it is necessary to equip the unit with a special anti.vibration plate.

Wacker Neuson MP20

The unit reliable and affordable in cost is designed to compact gravel-sand reflection, loams, asphalt, can work with paving slabs and stone. With a mass of 83 kg, it has good power, does not destroy fragile types of coating and is used for construction and repair purposes.

TOP-10 budget models of vibration fuels

For private use in a suburban area, they rarely purchase expensive construction equipment. Of greatest interest are budget, but functional models of vibration fuels.

VibroMash Wu-05-45

A 500 W electric unit works on a household outlet and compacts the soil of 30 cm. It interacts well with sand and gravel, can be used for asphalt, but it will be much slower to trample it. For road works, the model does not have enough performance, but for a summer cottage it suits well.

STEM Techno SPC 152

Inexpensive vibro.fuel flies from a gasoline engine with a capacity of 2.5 liters. With. With a mass of 50 kg, it is able to compact materials by 20 cm deep. Use the stove when laying tracks and embankments, the speed of moving the unit is 15 m per minute, the reverse in the design is not provided.

Zitrek Z3K 90

A rather powerful vibro.plate with a gasoline engine of 6.5 liters. With. Sealing soil, gravel and sand by 30 cm. Economically consumes fuel, is easy to manage. The inexpensive model does not have a reverse, however, wheels are provided that simplify maneuvering. The unit is used to arrange small garden paths, where it is required to lay pebbles, sand or crushed stone, and to care for lawns.

TSS WP60-L

A 10.5 kN gasoline vibro.plate supports 25 cm tamping depth and has a capacity of 6.5 liters. With. It is equipped with direct cold without reverse, the dimensions of the unit are compact, so there are no difficulties in the garden using the device. The weight of the plate is small. only 60 kg.

Zitrek Z3K 50

The vibration plate with a tamping depth of 20 cm works due to the gasoline engine, supports the force of the blow of 8.2 kN and successfully compacts soil, sand, pebbles and crushed stone. With a mass of 53 kg, manual control is easily succumbing and does not cause quick fatigue in the operator.

Zubr ZVPB-8.5G

A professional.type gasoline unit has a direct.flowing structure, supports a power of 2.5 liters. With. Can compact sand and soil by 20 cm, users include the average noise level 79 dB. Most vibration fuels emit a loud rumble during work.

Redverg RD-29142

A straightforward unit with a gasoline engine of 6.5 liters. With. equipped with an irrigation system and is suitable for asphalt work. Supports a depth of 25 cm, the shock force of the model is 11 kN.

Patriot VT 50 LB

Inexpensive gasoline vibro.plate with a 10.kon strike provides a tamping of the soil into 20 cm deep. It is used in summer cottages for processing lawns and arranging tracks, copes with the compaction of bulk materials. The mass of the unit is small, only 51 kg, and the power is only 3 liters. With., But for private purposes, this is quite enough.

Zitrek Z3K 81

The budget but powerful unit flips the soil of 30 cm with a force of 13 kN, is equipped with a 6.5 liter gasoline engine. With. With a mass of 81 kg, it has a smooth and easy move, does not cause difficulties in managing.

The price of Zitrek Z3K 81 is on average 24,000 rubles

Redverg RD-29140

Direct gasoline vibration plate provides a 20 cm seal. With a small mass, it copes with soil, sand and small gravel, the speed of moving the device is 25 m per minute. The shock force of the model is average. 8.2 kN.

Rating of the best, high.quality diesel models

Such devices on which diesel ICE are installed have excellent operational characteristics. It is worth noting that heavy vibration plates are equipped with diesel engines.

In addition, some of their models with a diesel engine can cost more than 1 million. Are the most expensive vibration stoves. As a rule, such devices are used by road services, as well as construction companies when performing repair work.

It is a reversible vibration stove, which is designed to perform both road and construction work of any complexity related to the seal of various coatings. Equipped with a powerful, reliable diesel engine. Thanks to this, Zitrek CNP 330-3 AES can be used when performing construction work even in the field. It is equipped with a spacious tank for 5.5 liters for storing fuel.

The duration of continuous work without refueling is about 4 hours. Fuel consumption is 0.6 liters per 1 hour. Thanks to the battery and electric steam, this device can be easily launched under different weather conditions.

Dimensions of the sole. 820×480 mm. Tommy area. 650 square meters per hour. It is equipped with a reverse. ICE volume. 406 cubic cm. The value of incoming efforts is 38 kN. The mass of the device is 250 kg. The power of the device is 5.7 kW, engine. 7.75 l.With.

• Durability;
• Build quality;
• The plate is made of high.quality, durable steel;
• Mobility;
• Simplicity and convenience of control;
• Suitable for difficult work.

This device is equipped with a special two.shall vibrator, which, thanks to an increased inter.service interval, is able to create a greater pressure force even in the case of work in an inaccessible place. Additionally equipped with a special motorcycle counter.

Has good maneuverability and is able to overcome even cool climbs. This device can also be used for tamping soil on slopes (angle of slope of the soil surface up to 30%). It can be equipped with a variety of additional options. a plate bruis, a volcanic rug, an electric steamer.

The total weight of the device is 391 kg. When using a loss of 75 mm, the weight reaches a mark of 413 kg, when using a bruiser by 150 mm, the total mass is 424 kg. Plate length. 450 mm. Equipped with a motor for 6.6 kW/9 l.With. Fuel consumption indicator. 1.6 liters per hour. Fuel tank volume. 5 liters.

• The ability to install additional options;
• Low fuel consumption;
• Assembly quality and components;
• The ability to adjust the height of the control handle;
• The ability to install anti.vibration mats.
• );
• The weight;
• Equipment (all additional options are purchased separately);
• Some users note that fuel consumption is higher compared to the standard indicator, which is indicated by the manufacturer.

This German production model is designed to lay paving stones, tamping such bulk materials as sand or gravel. Can be used to lay asphalt on the roads. The guide handles are automatically folded, which greatly simplifies transportation and reduces the risk of damage during movement.

In the manufacture of the supporting plate of this device, a high.strength cast iron with spherical graphite was used. Thanks to this, it has high strength indicators at the fracture and low level of wear. Thanks to a powerful diesel motor, Wacker Neuson DPU 6555HEAP can reach high speed and performance when performing the tasks. Has a small level of vibrations, which positively affects the level of comfort when operating the device.

It is equipped with a 9 motor.6 l.With. It is equipped with a reverse. Square dimensions 900×600 mm. The level of impact force is 65 kN. The maximum depth of compacted soil is 650 mm. Fuel consumption in continuous functioning is 1.9 liters per hour. It is equipped with a tank for storing fuel with a volume of 6 liters. Weight. 497 kg.

• Assembly quality and components;
• Reliability and performance;
• Functional;
• The quality of the slab;
• Small fuel consumption as a model of this class.
• High);
• The weight;
• The warranty period is only 1 year (for such equipment insufficient warranty period).

Rating of the most reliable electric drive models

Vibration plates equipped with an electric drive, compared with diesel or gasoline analogues, have low power, but they are much cheaper. For the functioning of such units, it is necessary to connect to the mains.

To perform work in places where there is no way to connect to the network, you will have to use the generator. As a rule, such devices are purchased for laying paving slabs and performing simple soil compaction work. Minimum

Reliable, high.quality electric vibrating plate, which is suitable for rammed, compaction of bulk soils, as well as laying paving slabs. Is a mobile, economical and compact device. To control this unit, only one operator needs even in a limited space. It is perfect for soil compaction near the basements of buildings, arranging borders on the roads. Also, this model is often used to lay small width pedestrian paths.

Equipped with an electric engine with a power of 0.55 kW. Dimensions of the sole. 500x300mm. The amount of effort is 11.3 pr. The total mass of the device is 80 kg.

• Low);
• Functionality (suitable for performing a wide spectra of simple tasks);
• Dimensions;
• Assembly quality and components;
• The sole is made of strong steel;
• Light weight.
• Low power (suitable for performing only simple tasks);
• Some users note that after prolonged functioning, the electric motor begins to heat up hard.

A compact device designed to compact various types of bulk soil, as well as a coherent road surface. It is perfect for both amateurs and professionals. Thanks to the use of IE-4509 and you can compact sand, gravel, asphalt concrete, conduct a variety of construction and repair measures. Suitable for completing tasks in conditions of limited space. The functioning of the electromechanical type is responsible for its functioning with a capacity of 0.25 kW.

Seal depth indicator. 200 mm. Device weight. 40 kg. Operates on a network, with a voltage in which 220 V is. Squire dimensions 400×320 mm.

High.quality, productive, according to buyers, an environmentally friendly device that has a low level of outgoing noise. Can be used to compact soils, as well as during laying cold or hot asphalt. Shatal PC-1443 can be used even in small areas with very difficult access.

Equipped with a reliable, high.quality electric motor, the power of which is 3 liters.With. Thanks to this, it is able to affect the surface with a force of 1400 kg. In the manufacture of the housing of the vibration plate, high.carbon steel was used, which has an increased level of strength. Thanks to small dimensions, this unit can be easily transported even in a passenger car. The mass of the entire structure is only 88 kg. Trump dimensions. 400×500 mm. Impact force. 13.7 kN. General performance level. 625 square meters per hour.

• High performance as for units of this class;
• Reliability;
• Power;
• Compactness;
• Low weight;
• Functionality (can be used to perform even complex tasks).

Electricity devices

VibroMash Vi-99 in

Ideal for a home craftsman. Many users say that there is no need to buy a tool in full configuration and assembly. It is quite possible to collect it with your own hands, moreover, for these purposes, you will not have to have engineering knowledge in the field of electricity and technology. The key detail of the device is the presented vibration engine.

He has two eccentrics of closed type on his sides, which are attached to the central shaft. When the latter begins to rotate, eccentrics shift their center of gravity, due to which vibration occurs. It is enough to take this electric motor, install it on the base of cast iron or metal, then attach the handle, and you can start work.

• A fairly reliable electric motor that is able to last a long time;
• High quality manufacturing and assembly;
• Unpretentious in work and maintenance.

Stroymashservice IE-4509 a

I would like to first say that the presence of an electric drive imposes certain restrictions on equipment of this type. In particular, the electrical vibro.plate is low in power, needs to be constant to connect to the network. With the help of this tool, it is possible to compact the soil of the average makeup to a depth of about 15-20 cm. At the same time, the power of the electric motor is low. the device consumes only 250 watts. This allows you to connect it even to worn wiring, you do not have to pay too large electricity bills.

The design of the device is very simple, there is only one relatively complex element here: the knot of the flexible hitch of the handle with the stove itself. The device is equipped with a stove of steel, the thickness of which is 2 mm. This is enough that the base does not be crumpled for a long time.

• Acceptable cost;
• Minor equipment capacity;
• The minimum amount of electricity consumed;
• The design is elementary. there are practically no complex nodes, so if necessary, the device can be repaired on their own;
• The device can trim loose soil to a depth of 15-20 cm.
• The insignificant mass of the device needs that additional efforts will need to be made to it;
• Small thickness of a steel vibrating plate.

Shatal PC-1443

In third place in this part of the review of the best electrical vibration fuels is a very high.quality Chinese production model. The company produces both electric and gasoline and diesel equipment options, and in overall dimensions these products are practically no different from each other. According to the developers, an original system of reducing vibration is installed here. The seal speed is very high. in the sand it can reach 25 m per minute. The maximum force of the device is 13.5 kN, the power of the electric motor is 3 horsepower.

The case is high.quality, reliable, no complaints about the assembly of the apparatus arise. Unfortunately, the device is quite expensive, so it is unlikely that every owner of a private house will be able to afford such a purchase.

• The presence of a unique vibration reduction system;
• High speed of work;
• Decent engine power;
• Good build quality.

Red Lighthouse VU-05-45

It has compact dimensions, domestic equipment, can be used even for professional work. In particular, the vibration plate is also suitable when laying the roadway, where the load on the equipment is the highest. However, the manufacturing company approves in the instructions for this device, which is best suited for a private house and cottage. The tool copes with any loose soils, as well as sand or small gravel. The material will be compacted to a depth of 15 cm.

The power of the electric motor is 0.5 horsepower, consumes a little electricity, so the device can be powered through the most ordinary household outlet. The length of the power cable is short. it is only 2 meters.

• It is quite suitable for individual construction and professional work;
• It copes well with any bulk materials;
• Connected to the network through a conventional outlet;
• Consumes a minimum of electricity.

VibroMash WU-05-45 220V

Another apparatus of domestic manufacturing. It is equipped with an electric motor, the power of which is 0.5 kW. this makes it optimally suitable for homework and individual construction. In principle, you can find the same model, only with a kilowatt engine. Regardless of the modification, the device is connected to a household electrical network. The depth of the tamping is quite decent. on particularly loose soils, it can reach 30 cm.

Sand and small gravel are almost instantly, but with asphalt or asphalt crumbs you will have to tinker. According to the manufacturer, such a device is perfect even for professional road works. The bed is made of rather thick metal, so when using the device you do not have to make serious efforts.

• Acceptable cost;
• Long service life;
• It is possible to buy a modification with a more powerful engine;
• A rather long supply cable;
• Can be used for professional purposes.

Gasoline units

Masterpac PC 5018

The apparatus of Chinese manufacture is characterized by the highest quality and insignificant fuel consumption, although the technically characteristics are very high. The nominal power of this vibration plate is 5.4 horsepower. this is much more compared to any electric model. The impact force during operation is 18 kN. Using this indicator, it is possible to trigger soil to a depth of 20 cm.

The handle is weak: it is made of stainless steel, but the walls of the tubes are quite thin. It does not provide any management elements. It is most convenient to work in a summer cottage with this tool. In principle, theoretically, you can use the design for the tamping of large crushed stone and asphalt, but you will have to spend a lot of time and effort on these processes.

• Autonomous work;
• Insignificant fuel consumption;
• Effectively showed his useful qualities in summer cottages;
• The soil can be triggered to a depth of 20 cm.

Champion PC6337F

One of the cheapest autonomous tools of this type. The equipment was developed by Chinese engineers and is produced at the enterprises of the same country. The device will be very useful for people who want to equip a track from any materials on their summer cottage. The working area of ​​the base is small, but this is done not so much from the savings of metal as so that the tool is as convenient as possible to work. With a vibro.fuel, it will be possible to easily climb even into hard.to.reach places, arrange areas of complex shape, for example, with turns.

Such a device is able to cope even with asphalt coatings. The capacity of the equipment is 5.5 horsepower. The productivity of the tool is at a very high level. in one shift you can process up to 500 square meters.

• Good tool performance;
• Decent power of the vibration element;
• A small workplace allows you to carry out work even in conditions of limited space;
• Acceptable cost.

Wacker Neuson VP 1550AW

Characterized by a reliable and durable engine. He is able to work without a break for a long time. The motor is made by the world.famous Honda company. The assembly is simply excellent. The case perfectly protects the internal details of the vibration plate from atmospheric moisture. The control handle, if necessary, can be adjusted in height. this allows you to work with the device as comfortable as possible. Engine power is 5.5 horsepower.

Users in their reviews claim that the motor almost never fails. If the engine maintenance is regularly carried out, then it will last several decades. The workplace is also small, which makes the tool very maneuverable. it is convenient for them to use in small areas.

• A reliable engine. can last several decades;
• The case is qualitatively protected from moisture;
• Decent power of the device;
• The handle is adjustable in height.

Zitrek CNP 330-A2

Today, products from this well-known Czech manufacturer are considered one of the best in the world, although it is quite expensive. The assembly quality is really excellent, the engineers in the development of this device carefully thought out its configuration. This gasoline slab operates on the AI-92 fuel, can easily withstand even quite high loads. In general, as users say, this model should be attributed to a professional tool. For a summer cottage, the device will be excessively powerful, since it is best for asphalt coatings.

The maximum depth of the material is 90 cm. The power of the engine installed here is as many as 6.5 horsepower, the highest impact force reaches 38 kN. In just one hour of work, the device is capable of processing up to 650 square meters of base.

• Very high power of the device;
• Suitable for professional purposes;
• Decent depth of the basis of the base;
• Significant speed of work;
• Increased power of the electric motor and increased impact energy.

TSS-WP160L

This technique is characterized by expensive price, but it has increased functionality, which allows us to talk about the optimal ratio of price and quality. This device belongs to the group of professional technology. The power of the gasoline engine is 4.8 kilowatts. The maximum depth of the seal can reach 50 cm. In just one hour, the equipment can process up to 570 square meters of the surface of any type.

The value of the working base is not too large. only 78×48 cm. The impact power in the tool is 30.5 kN. Such a constructive solution allows us to largely increase the productivity of the apparatus. In addition, users note the highest reliability of this equipment. The plate is reliable, resistant to abrasion. All elements except the engine, domestic manufacture, so replacing the failed part will not be the slightest problem.

• The optimum ratio of price and quality;
• The plate is capable of compacting soil to a depth of 50 cm;
• Significant power of the blow;
• The small size of the working base makes the device very maneuverable.