How to cut a thread curtain exactly. Upper section

How to cut the curtains: decature and processing of the lower cut. 122 photos of the correct cut of curtains

Sewing lovers often have to deal with problems related to the choice and calculation of the material, the preparation of patterns and drawings, as well as with the assembly and sewing of fragments of the product among themselves. Exactly cut off the edge of the fabric is one of the most difficult tasks even for experienced needlewomen. Especially if it concerns thin tissues, such as organza, veil, silk, chiffon, etc.D. It is necessary to cut thin fabrics when sewing curtains, bedding and decorative sewing products. The edges of the curtains are cut to change the interior or to eliminate defects that appeared over time during operation.

In some cases, the edge of the material has to equalize the edge of the sellers on your own relationship. When buying the fabric, carefully ensure that the seller carefully measured the length of the piece you need, especially if the canvas is very long.

What is the difficulty cutting off tulle

Tulle is a very delicate and fragile fabric, so you need to handle it extremely carefully. With improper operation, defects quickly appear on it in the form of vertical or horizontal arrows, puffs and holes. The difficulty of cutting a tuel canvas is that it slides over the surface. If the size of the piece of material is large, it is difficult to fold it in half and connect the edges symmetrically. For this, it is recommended to lay out tulle on a flat hard surface. Too thin fabric is pre.wetted, faded and sucked or pinned to paper. This method almost completely eliminates sliding during cutting.

Attention! Do not try to cut off the fabric by weight. This method will never give even edges.

How to fix thread curtains in the doorway

With thread curtains, you can decorate not only windows, but also rectangular doorways, arches or ceiling plasterboard structures, with which the room is zoned.

But it is not easy to attach a kitty in such places, since an ordinary cornice protrudes above the wall, and a thin profile one does not fit into complex curved forms.

It is for this reason that the ribbon-forming tape is most often used to decorate the arch. It consists of two parts. the so.called “mom” and “dad”. The soft half, or “mother”, is sewn to the back of Kiseya, and hard, or “dad”, glued to the structure. In this case, the location is in advance in advance. If the ribbon of the Velcro has no adhesive side, you can attach it with a glue gun.

Using Velcro, you can fix the thread curtain and on the window itself. To do this, its rigid side is glued directly to the frame, and soft, as in the previous case, is fixed on the curtain.

In addition, the thread curtain can be fixed on the doorway using:

• elastic bands (knitted lace) and nails. Gum or stretching cord are passed through the canto curtains, the curtain is slightly assembled. Two nails are nailed on both sides of the doorway, on which the edges of the elastic band are fixed;
• Kryuchkov and satin ribbons. Hooks are driven into the wall above the doorway at an equal distance. Kant of the queen of the curtain is folded several times and bandaged with ribbons. their number should be equal to the number of hooks. Each ribbon is fixed on the hook.

A way to fix thread curtains using the example of other curtains:

Operating procedure

Carefully measure the window width. Remove the limiters and chain mechanism from the curtains.

Place the detailed curtain on a flat horizontal surface. So that there is no trace of the knife on the table, take care in advance about the presence of a plywood substrate or wood.fiber slab.

In the upper and lower part of the panel of the roller curtain, set the required width and put the tags. Show maximum attentiveness, because even several millimeters of distortion will be clearly visible.

Cut the excess part of the upper tube onto which the canvas is wound with a hacksaw. If for this purpose you use a corner grinder, first cover the curtain with dense material, to prevent fabric burning with flying sparks.

Put the clamps and chain mechanism in place.

It is completely not difficult to shorten the curtains, the main thing is to show accuracy, measurement accuracy and impeccably observe the instructions that gives the understanding of how to correctly cut the curtains.

The story of curtains

For the first time, thread curtains appeared in the east. It was this structure of the canvas that protected from sunlight and provided unhindered hit of fresh air inside the room in a hot climate.

Hanging curtains in the interior gently dispel bright light, without obscuring the inner space. The translucent fabric, consisting of thin horizontal lines, creates a comfortable internal atmosphere, fenced from curious eyes.

Over time, this type of decoration has gained popularity far beyond the borders of the eastern countries. Residential premises and commercial establishments (cafes, restaurants, clubs) are designed to create a unique charm and mood with curtains.

Methods of fixing on the window

The window opening of absolutely any shape can be draped by with quanted curtains and for this you do not need to additionally purchase some special cornice. For example, if the old curtains hung on a regular (or flexible) pipe cornice, you need to do as follows:

• Check if there is a special textile -kulisk in the upper part of the thread of the thread;
• If it is not, but there is just a dense insert, then you need to sew the “” yourself. For this, Kant curtains are folded in half and stuck;
• Remove the cornice pipe, gently put into the “” and fix it in the same place.

I hang on the octhanage arches (doorways) I use as a canopy (light partition) I do not use them

If there is a cornice with rings in stock, then Kiseya can be hung on the window either using hooks or using clamps.

In the first case, a special curtain tape will need to be sewn to the threaded curtain. It can be both thin and dense. How it’s done:

• The length and width of the canta curtains are measured;
• a curtain tape is taken, the width of which is 1 cm less than the width of Kant, and the length is 6 cm larger;
• accessories are sewn from the back of the curtain and is ironed;
• hooks are inserted into a curtain tape at a distance of 10-15 cm from each other, after which they are fixed on the rings.

To fix the curtain on the cornice using clamps, which are sometimes called “crocodiles”, even easier. It is enough to calculate their number, evenly distribute the clamps on Kisa’s Kisa and hang a thread product.

Similarly, you can place thread curtains not only on the windows, but also in the doorways, inside which you can fix a thin profile cornice.

Methods of fixing on the window

The window opening of absolutely any shape can be draped by with quanted curtains and for this you do not need to additionally purchase some special cornice. For example, if the old curtains hung on a regular (or flexible) pipe cornice, you need to do as follows:

• Check if there is a special textile -kulisk in the upper part of the thread of the thread;
• If it is not, but there is just a dense insert, then you need to sew the “” yourself. For this, Kant curtains are folded in half and stuck;
• Remove the cornice pipe, gently put into the “” and fix it in the same place.

I hang on the octhanage arches (doorways) I use as a canopy (light partition) I do not use them

If there is a cornice with rings in stock, then Kiseya can be hung on the window either using hooks or using clamps.

In the first case, a special curtain tape will need to be sewn to the threaded curtain. It can be both thin and dense. How it’s done:

• The length and width of the canta curtains are measured;
• a curtain tape is taken, the width of which is 1 cm less than the width of Kant, and the length is 6 cm larger;
• accessories are sewn from the back of the curtain and is ironed;
• hooks are inserted into a curtain tape at a distance of 10-15 cm from each other, after which they are fixed on the rings.

To fix the curtain on the cornice using clamps, which are sometimes called “crocodiles”, even easier. It is enough to calculate their number, evenly distribute the clamps on Kisa’s Kisa and hang a thread product.

Similarly, you can place thread curtains not only on the windows, but also in the doorways, inside which you can fix a thin profile cornice.

What is Kiseya made of

In the production of thread curtains, not only textile materials are used. For decor, rhinestones, metal elements, feathers, beads, etc. are used. D. Jewelry and fibers can be combined, supplement each other.

Conditionally, curtains-nits can be divided into the following categories, depending on the material of manufacture:

• With solid fittings. It can be distributed along the entire length of the thread (through certain gaps) or act as the basis of the curtain: for example, beads strung by a continuous row, beads.

With solid fittings

It is easy to work with musical curtains (both at the stage of creating a decorative ensemble, and during operation). They are obedient: they retain the form set by them, do not get confused, do not think and do not deform over time.

• The last variety of curtains includes a combination of thin strips of fabric and decorative threads from forests with solid jewelry strung on them.

The minimum is the cost of the simplest plain product from artificial materials, increasing the price will provoke:

• use of natural fibers;
• firm jewelry;
• Weaving threads: decorating the surface with dense in texture butterflies, flowers, figures of animals;
• product size.

How the curtains are cut, cutting curtains-video

How to cut curtains and pick them up is an actual question for many housewives. Window decor is the final stage of the room. Indeed, today, more and more often, not only independently processes the fabric of curtains and curtains, but even sew these interior items.

How to cut off the fabric?

Needlewomen and just housewives are faced with difficulties, when purchased curtains are not suitable for the length, and they must be correctly trimmed. To do this, you need to know some nuances that will facilitate the process of reducing the length of the curtains.

First of all, the fabric should be laid out on a flat surface. The bottom of the curtains must be wrapped in the amount of fabric in centimeters, which is required to be cut off, while not forgetting to leave a place for the subsequent hem. Когда поверхность будет идеально ровной, сгиб следует пригладить, слегка надавливая на материю.

With one hand, you need to hold the folded fabric over the edge, which is located at the top (for reliability it is better to stab it with pins or needles), and the second can be proceeded by circumcision. In this way it is very easy to cut a roll curtain or other dense fabrics.

But if you need to shorten the synthetic fabric such as organza or tulle, then some nuances may occur. To do this, it is better to focus on the factory edge of the fabric, since in production it is always done even.

It is necessary to fold the fabric in half, leaving strictly along the edges. It will also allow you to notice if the curtains were already bought uneven. In cases where the edge is uneven, it should first be cut from both edges, then folded in half and combined with the center. Next, you need to make cuts on an excess in those places where the marks were previously made to coincide the fabric. After that, the fabric must be folded in 2 layers and connect the cuts on the edges and in the middle, outlining the fishing line for the trimmer with soap using a long ruler. The incision should be made on this line to determine the smooth edge of the matter. It will also be required in the same way to align the other edge of the curtain. Cut the fabric, not forgetting to leave up to 10 cm on the binder below.

The next stage involves folding the fabric in half in width, carefully combining all the edges, and then smoothing should be avoided to avoid creases and folds. It remains to cut matter on the bend and do the same with the rest of the pieces.

In order to shorten properly sliding fabrics, which are difficult to put and fix it, you should measure the required length, making a serif in the right place, and then pull out the thread gently. On the formed line and the curtains should be cut.

Switch processing methods

When the curtains or curtains were correctly shortened, they need to be bent. There are several ways in which the seams of various matters can be processed. Consider the main ones:

• Manual. secret seam. This is a rather laborious way that requires some experience.
• Machine. ordinary line. This is a universal and easiest way if there is a sewing machine.
• “Web”. using a special adhesive tape. Shortening in this way is allowed for those fabrics that strive only at low temperatures.

Basically, the processing of the seams depends on the density of the fabric and the use of the lining. For simple thin curtains, a double.bending method is suitable. But dense roller curtains are best borrowed with a single bend to avoid gross and voluminous seams. There is also a binder using a edging in the form of a oblique fiber, which should be purchased in advance in the store. To do this, you need to bend the tape in half, placing the edges of the curtain inside, fix it with pins, and then stuck out after the machine.

In addition to standard methods, there are still extraordinary solutions, for example, how to shorten the curtains without cutting them. In this case, you need to adhere to the next order of actions:

• First of all, you should hang the curtain on the cornice, after which, using a needle and thread, starting from the middle, make stitches with your own hands to the edges. In the lateral lines, you need to round a little, and the central seam is made 20 cm higher in comparison with the side.
• The top of the thread should be fixed.
• Pull the thread down until we get the right length.
• In conclusion, we fix the seams.

Another option of flat.to.cutting of edges without circumcision involves the use of non.woven tape. To do this, bend the curtain to the desired length, then glue the tape.

And another option for shortening the curtains is to use curtain magnets, ribbons, crabs and other items to fix the fabric.

How to cut curtains-niti?

Chisa curtains look very original and modern, so they are in great demand. But quite often such products are purchased with standard length, which does not correspond to the required size for decorating the window. Therefore, you need to know how to cut a thread curtain at home.

The cutting procedure of cutting curtains resembles hair haircut. The process consists of the following stages:

• If the curtains are horizontally, then it cannot be cut off exactly. Therefore, they should be hung on the cornice and wait a couple of days so that they are leveled and stretched out. When Kiseya hangs evenly, it can be cut with scissors.
• Curtains should be cut with scissors carefully on weight, while you do not need to pull the thread. Can be trimmed both exactly and creating a curly bottom. In order to manage to cut the curtains evenly, it is recommended to use a book or cardboard that will hold the threads for circumcision.
• Thanks to special weaving, thread curtains do not need further processing. That is, they will not fly over time.

If there are doubts that it will be possible to even cut the thread curtains, you can use a comb with rare teeth. The threads, like hair, will be passed through the teeth of the comb to the desired length, therefore, pressing them to the edge, you can cut off exactly the required length.

Tips on how to unravel the curtains of threads

Kisei curtains are many threads hanging with a beautiful direct waterfall. And in order to preserve this beautiful appearance, you need not only to wash Kiseya correctly and take care of it, but also take into account another important fact. Namely, the one that the threads of such curtains are so thin that it will not be difficult to get confused. How to unravel the thread curtains and will be discussed in this article.

So that Kiseya is not confused

When buying Kisei in the store, pay attention to the fact that they are tied with rubber bands along the entire length, so the seller gives a guarantee that they are not confused before you started hanging them. If Kisei lie in a bag simply in a large lump, it is better to return them back to the store, because they are originally already confused.

Kiseya with beads can get confused both in the process of use and in the process of hanging on the window. To prevent this from happening, follow our tips.

• When Kiseya is not unpacked to cut off all the hauls, and only one is the upper.
• After that, hang the curtain on the cornice.
• In turn, cut the hauls from top to bottom, while each time more and more straightening the pussy along the cornice.
• Having reached the very bottom of the thread curtain should be all over the width of the cornice and not confused.

If confused places have formed in the process of hanging, they should be carefully unraveling. And most likely the ropes here simply twisted.

Kiseya with glass or beads is sometimes sold in separate form, and jewelry is worn after hanging the curtains. And there are ready.made models, when hanging which it is necessary to pay special attention to ensuring that the threads do not get the beads.

To unravel the thread curtain neatly, you need without sudden movements, without pulling the threads, stretch one rope from a complicated knot.

If Kiseya is already confused

If your curtains are confused in the process of their operation, and tight nodes have formed on them, then such a curtain should be unraveled so.

• Remove Kiseya from the cornice.
• Lay out on the floor or bed.
• To avoid even more confusion, those ropes that have not yet formed the nodes collect in bundles and bind along the entire length.
• Take your knitting knitting needle to your aid.
• With its help, unravel the knot carefully pulling each thread. Do not pull the threads, but only slowly pull them in the right direction.
• Kiseya with glass or beads can also get confused, but most often the threads are simply entangled around the jewelry, without forming tight nodes.
• Tie the scythe with a scythe along the entire length and hang on the cornice.
• Remove all the screeds and straighten the product with your hands.

It is obvious that the process of unraveling the curtains is long and laborious. But in order to return the previous beauty to your beloved decoration, you should make efforts, show patience and accuracy.

Measures for the prevention of confusion in Kiseya

Everyone dreams of a miracle of thread curtains that will not get confused at all. We have some tips on how to avoid confusion in Kisei.

• Do not hang a long pussy in the nursery, where are still very young children. Indeed, during active games, your favorite curtains can fall under the distribution.
• If Kiseya hangs in the doorway, then it is better to collect it in two lateral grabbing.
• In the case when threaded curtains decorate the balcony door and interfere with its active use also use the curtain clamp and collect the ropes in the pickup.
• If you notice at least the slightest confusion on Kisei, immediately block them without waiting for the formation of large nodes.

We hope that our tips and recommendations will help you cope with unraveling the thread curtains and avoid their subsequent confusion.

Pruning of thread curtains

It is very difficult to cut down thread curtains, given the feature of this type of curtains. Their feature is that the curtains consist of a large number of vertical lines that are in no way connected. This significantly complicates the process of circumcision.

As in previous cases, it is initially necessary to lay the curtains on a flat surface, straighten the threads as much as possible so that they are at the same level. After that, it is necessary to apply a label, according to which later it will be necessary to cut off. Given the peculiarity of the curtains, it will be impossible to apply a label with an ordinary pencil or handle.

It is recommended to crush the curtains with any board as smooth as possible, and the circumcision is carried out with a clerical knife. This will allow the most evenly and carefully shorten this type of curtain.

It will not work to process the edges, given the features. In the photo cutting of curtains from threads, it is clear that then, most likely, it will be necessary to adjust the length in some places.

How to cut curtains and niti exactly

The formation of a flat lower edge The standard length of the curtain is up to three meters. Usually there is a need to shorten the product. It is not necessary to contact the studio and pay the master for work. At home, you can easily cut curtains-niti, both in length and in width of the product. What is required for this, we will consider below:

• Remember that in a horizontal position this procedure cannot be performed. The threads can get confused, and, in the end, cut them evenly. the product will be spoiled. To prevent errors, hang the curtains on the cornice, as they will hang after cutting.
• Three days, curtains should hang. This is necessary so that they stretch out. This is the only way to achieve that the threads will be located strictly vertical and parallel. This will create the most elegant effect as possible.
• Carefully check that the fabric is perfectly flat. Only after that proceed to cutting.
• Take the tailor’s scissors and carefully cut the curtains.
• The curtains made of quality material do not require additional processing.

To simplify the process, try to press the ends of the threads to the floor with a cardboard

Scissors for work should be sharpened, otherwise they will “chew” threads and can damage the appearance of the product.

Now that you know how to cut down the thread curtains without problems, feel free to get them, because, without exaggeration, they are able to adorn any room with dignity.

Pruning of thread curtains

It is very difficult to cut down thread curtains, given the feature of this type of curtains. Their feature is that the curtains consist of a large number of vertical lines that are in no way connected. This significantly complicates the process of circumcision.

As in previous cases, it is initially necessary to lay the curtains on a flat surface, straighten the threads as much as possible so that they are at the same level. After that, it is necessary to apply a label, according to which later it will be necessary to cut off. Given the peculiarity of the curtains, it will be impossible to apply a label with an ordinary pencil or handle.

It is recommended to crush the curtains with any board as smooth as possible, and the circumcision is carried out with a clerical knife. This will allow the most evenly and carefully shorten this type of curtain.

It will not work to process the edges, given the features. In the photo cutting of curtains from threads, it is clear that then, most likely, it will be necessary to adjust the length in some places.

What it is

Glue web. these are glue threads. Gluing the fabric surfaces occurs by warming up the tissue, as a result of which glue strings, melting, penetrate the structure of the canvas and glue it with each other. They play the role of a secret machine that are designed for hidden fabric fastening, but only adhesive option is cheaper, since it does not require the involvement of additional equipment. A web for fabric in rolls is produced. One such roll is enough for use at home for a long time.

When the curtains or curtains were correctly shortened, they need to be bent. There are several ways in which the seams of various matters can be processed. Consider the main ones:

• Manual. secret seam. This is a rather laborious way that requires some experience.
• Machine. ordinary line. This is a universal and easiest way if there is a sewing machine.
• “Web”. using a special adhesive tape. Shortening in this way is allowed for those fabrics that strive only at low temperatures.

Basically, the processing of the seams depends on the density of the fabric and the use of the lining. For simple thin curtains, a double.bending method is suitable. But dense roller curtains are best borrowed with a single bend to avoid gross and voluminous seams. There is also a binder using a edging in the form of a oblique fiber, which should be purchased in advance in the store. To do this, you need to bend the tape in half, placing the edges of the curtain inside, fix it with pins, and then stuck out after the machine.

In addition to standard methods, there are still extraordinary solutions, for example, how to shorten the curtains without cutting them. In this case, you need to adhere to the next order of actions:

• First of all, you should hang the curtain on the cornice, after which, using a needle and thread, starting from the middle, make stitches with your own hands to the edges. In the lateral lines, you need to round a little, and the central seam is made 20 cm higher in comparison with the side.
• The top of the thread should be fixed.
• Pull the thread down until we get the right length.
• In conclusion, we fix the seams.

Another option of flat.to.cutting of edges without circumcision involves the use of non.woven tape. To do this, bend the curtain to the desired length, then glue the tape.

And another option for shortening the curtains is to use curtain magnets, ribbons, crabs and other items to fix the fabric.

Cut the curtains yourself! With an adhesive tape from Ikea is easy!

I wanted new curtains in the room, but the height of the ceilings was not standard 2.20 m. Curtains in ikea or 2.50 m, or 3.00 m.

Shorten in the workshop- expensive and troublesome. Fortunately, I found out about this tape! And what can you shorten the curtains yourself!

The principle of action of a simple tape is a solid glue that melts under the influence of a hot iron and glues the fabric.

Shrinking: I tried to make a gap for shrinkage, but I had a curtain on the floor. I didn’t like it, and it’s not convenient to walk near the window. I decided at my own peril and risk, shorten to length, excluding shrinkage.