How to cut polypropylene leaf along. Required tools

Polycarbonate cutting

At the moment, polycarbonate is one of the main materials used in the construction and arrangement of private households, personal plots and greenhouses. Work with him begins with cutting, and not only the appearance, but also the strength of the structure made of polycarbonate depends on how correctly it is performed. Therefore, it is extremely important for each summer resident or owner of a private house, how and what tools to cut this material.

Polycarbonate is a hard transparent or translucent plastic, which has high strength and, compared with glass, less mass.

There are two main types of this material.

for cellular polycarbonate

Table. The main sizes of polycarbonate sheets.

Polycarbonate density

In this article you will find everything you need to know about the density and other characteristics of polycarbonate! In addition, we recommend reading an article about what thickness polycarbonate is best used for a greenhouse.

Polycarbonate cutting tools

One of the advantages of this material is that tools for working with it can be found in almost every house.

The following tools are successfully used for marking and cutting polycarbonate:

• stationery/construction knife;
• electric jigsaw;
• corner grinding machine, better known as the “corner grinder”;
• a circular saw;
• Kryazuvka for metal.

From industrial equipment for these purposes, milling machines with numerical management and special types of lasers are suitable for these purposes.

Polycarbonate cutting tools: hacksaw, circular saw, tape saw

Along with this, there are tools that in no case can be used to work with polycarbonate, otherwise there will be a risk of damaging the sheet and get extremely unsatisfactory results.

• Kryuzovka on wood. its teeth are too large, they are not so much cutting polycarbonate as they tear. As a result, you will have a lot of zazubin, burrs and cracks at the edges.
• Building scissors or scissors on plastic. they are suitable exclusively for thin monolithic sheets of material. Otherwise, when squeezing polycarbonate (especially cellular), on both sides, the sheet is deformed near the cut.

Now we will consider in more detail the preparation and the process of cutting the most popular tools.

Scissors for plastic pipes

The tool with a ratchet of mechanism belongs to the class of scissors, only the cutting canvas in this case one. The return element is the supporting arcuate platform, to which a pipe is pressed at an angle of 90 degrees. In its design, the device also resembles a pistol, since a trigger is a little more palm long as a lever.

Scissors with a ratchet mechanism

Scissors are used for cutting plastic pipes with a diameter of up to 63-75 mm. Standard products are designed to shorten workpieces with a diameter of up to 42 mm. The ratchet mechanism allows you to add a minimum amount of effort to the lever. This tool can provide an accurate cut. But it is important to maintain the blade in a sharpened state so as not to deform the pipe. And there is also a risk of a defense of the angle of 90 degrees.

A simpler option for cutting plastic products are lever scissors with a spring mechanism. The inconvenience of using such a tool is that with one hand it is easy to work with products of not more than 25 mm in diameter. In other cases, you have to act in two, which does not allow to hold the pipe at the right angle. But you do not need to press the trigger many times, since there is no gear mechanism.

Lever scissors with a spring mechanism

Selection of a particular type of polypropylene pipes for certain conditions

For cutting pipes from polypropylene material, scissors are selected in accordance with the specific value of their diameter value. Today, manufacturers represent the material of the pipes in four versions:

Read how to cut large ceiling plinths

Important! The choice of type of polypropylene pipes should be made carefully, taking into account the temperature and water pressure in the system, since these factors directly affect the life of the pipeline!

In addition to various polypropylene pipe products, manufacturers produce many fasteners and composite elements. The latter are often equipped with extruded brass inserts with internal or external threads. Metal inserts allow you to easily install dense connections and switch to other materials.

Remember! Only professional, high.quality modifications of the cutting tool are able to effectively cope with sharp polypropylene pipes, regardless of their thickness and diameter!

Tools for cutting panels without defects

To adjust the length or width of a pair of lamella, enough ordinary hacksaw. But if there are many sheets, you should choose a more powerful tool.

2 types of cutters are used.

• Mechanical. cutting is produced, putting physical effort. The speed is completely dependent on the capabilities of the employee. This method is preferable to figure cutting, since patience and accuracy are required here. Mechanical include hacksaws, knives, cutters, manual jigsaws.
• Power tool. the employee directs the cutting blade, but does not make his own efforts. Thus, you can cut a much larger number of panels. Representatives of the category: circular electric saw, corner grinder, electric.

Manual tool is cheaper to use. Electric requires connection to the network, but it is much more efficient.

For cutting, they take a stationery, construction and even a kitchen knife. The best option is construction, as it is better balanced for such work. When using a stationery, for example, you will have to cut under the square, which is not too convenient.

For cutting along 3-4 sheets, the painting knife is most suitable. He has a very thin and sharp blade, a fishing line for a trimmer cut is also thin and neat. However, across the lamellas with a molar knife, it will not work to cut.

Hacksaw

Manual hacksaw is ideal for work. The fishing line for the cutting trimmer is thin, without chips, since small cloves do not grab the fiber. You can cut along and across, diagonally, since the speed here is determined only by the applied efforts, the risk of temperature melting panels is extremely small.

Electric

Allows you to perform a cut along and across several sheets at once. The tool has the advantages of manual, but when using it, the employee is much less tired. However, due to the speed of the teeth, figure cutting with it is extremely difficult to do with it.

You need to work at minimum power so that the plastic from heating does not deform. If the tool is heated, you need to stop and wait until it cools down.

Corner grinder

For cutting panels, the angular grinder is not suitable: the speed of rotation of the disk is very high, the material heats up during operation. Therefore, they take low.power models and the thinnest disc. 0.8 or 1 mm. Undoubted plus: a thin and accurate razm, regardless of the temperature of plastic and weather conditions. Corner grinding can cut the lining in the cold. Minus: highlights a lot of dust.

Circular

The circulation saw is also designed to work with a large volume of material. The tool provides a perfectly even cut several sheets at once. Cutting in any direction is allowed. For a file, you need to take a special disc for plastic or model for soft wood, plastic and aluminum.

Prevention of errors, safety precautions

When cutting plastic panels at home, it is important to observe the rules for handling the material. Otherwise, a flat cut cannot be achieved.

• The panels are placed with the front side down. As a rule, the outer side of the panels reproduces some kind of structure, has a relief. During direct cutting, the texture is crushed, cracks and dents appear. Such defects are also possible on the inside, but they remain invisible and do not affect the user characteristics of the material.
• Before the work, a fishing line for a trimmer cut is marked on a pencil or felt.tip pen. This noticeably simplifies processing, especially if the cut should be done figured. The marks are easily erased from the smooth surface of the material.
• It is forbidden to cut plastic in the cold. The panels immediately after transportation or transfer from the cold are left in a room with a temperature of up to 10 ° C for a day and only after that begin work. When cooling, the material becomes fragile and it will be very difficult to cut it.
• To reduce the preparation time, several sheets often cut at once. You can do this, but at the same time you need to follow some recommendations. Sheets must be laid on a two.point support so that they do not bend during operation and do not sag. Put the panels tightly and accurately. It is advisable to rest the opposite edge of the pack into the wall to avoid the displacement of the sheets relative to each other.
• During cutting, a fairly large amount of dust is released, so it is better to perform work in a respirator or in a gauze bandage. In addition, the appearance of small crumbs and fragments is possible. Their edges are not too sharp, but can cause an injury. When cutting, you need to wear glasses, protect your hands with gloves.

The appearance of microcracks from the wrong side, some manufacturers consider the norm.

polypropylene sheets cut in size and shape

The Plastic People can provide you with a number of strong, but light polypropylene sheets with outstanding thermal, mechanical, chemical and electrical properties.

One of the most inexpensive engineering thermoplasts in the world. These types of polypropylene sheets have excellent resistance to acids, chemicals and corrosion.

Since polypropylene does not respond with water, detergents, acids or alkalis, it does not break easily and withstands daily wear.

over, this universal plastic material provides excellent impact resistance and exceptional resistance to cracking and voltage even when bending. In fact, polypropylene is almost impossible to break.

Operating temperature range from.20 ° C to 80 ° C, so it is reliable in various types of environment.

Our high.quality polypropylene sheets are available to various thicknesses and two brands: copolymer and homopolymer.Homopolymer. This is pure polypropylene, available in black, white and natural color. Below are all our homopolymer sheets. If you need flexibility, impact resistance and a wider selection of colors, ask us about the polypropylene block.

For convenience, simplicity of use and minimizing losses, all our polypropylene sheets can be made in strict accordance with your requirements, including pruning in size, shape and drilling.

Our high.quality polypropylene sheets are available below in several thicknesses and in one class: copolymer.If you need a homopolymer, contact us and we will help. Both types of polypropylene are used in many cases, but the copolymer provides greater flexibility and better resistance to cracking under voltage. Learn more about the differences in our questions and answers below.

Why is the polypropylene sheet used?

In fact, white polypropylene. This is a type of plastic, which is known for its high strength and chemical resistance. Polypropylene sheets are multifunctional, and the advantages listed above make them suitable for various commercial applications.

For example, its high strength and chemical resistance make it a popular industrial component, especially in chemical production and mechanical engineering.

In addition to these industries in general, you will also find that polypropylene sheets are often used to facing walls in hygienic rooms used to store and production of food products. This is because it has a high level of water absorption and can work in a wide temperature range.

Polypropylene is also not uncommon in prosthetic materials. This shows to what extent the enterprises can rely on this product in order to meet the requirements of industrial standards.

How to cut polypropylene sheets?

Cutting polypropylene sheets on straight lines. A very simple task if you use the right tool for work (and there are several such opportunities).

In most cases, a saw with small teeth is suitable. Always clamp the plastic in a static position when sawing on a pre.marked line.

The saw you use depends on you. Sometimes a circular saw is a safer option. Paise between the cuts, if you can (since prolonged sawing can cause friction heating and melt the plastic).

The cutting process can be completed in seconds. With a minimum disorder.

Where to get polypropylene sheets

Simply because polypropylene is usually used for production. Do not think that it is difficult to buy on the Internet.

In The Plastic People, we are proud that we supply polypropylene sheets carved by exact or shape.

You can familiarize yourself with our assortment of polypropylene sheets below.We supply natural, white and black polypropylene sheets for a variety of purposes.

Just use our calculator above to get a price offer for cutting in size or form.

Polypropylene film for casting and blowing

Hofer Vliesstoffage 2015.

Hofer Vliesstoffage 2015 Advanced Polymer Film Control Systems for the Analysis of the process and output optimization, complete integration into production.Michael Collurt Mondi Gronau GmbH

Treofan packaging films

Treofan P A S I O N O V A T I O N PACCESS Assortment Product Review Treofan, who are we Treofan Group. Leading manufacturer BOPP, offering the most complete assortment

How to create a sox

Co.sealing film structures from PLA and EVOH, represented by: Pablo J.Garcia, Cuuray America Inc. Description of the Eval Business Prerequisites and PLA and Evoh Method and Materials Results

Ve tekni̇k özelli̇kleri̇

Çok katmanli ambalaj fi̇lmleri̇ ve tekni̇k özelli̇kleri̇ muharrem demir www.Apack.com.TR 2 Katmanli Pa 30 microns PE 70 microns PA = polyamide (foundation-base) PA / PE 30/70 PE = polyethylene (sealing layer) 5 katmanli additional information

Unique technology from Kuraray

Evoh barrier film unique technology from Kuraray Kuray Co., Ltd. He is the world leader in the production and development of EVOH resin (copolymer of ethylene-vinyl alcohol) under the Eval trademark. Eval

Wiring and cable guides

The guide for wires and cables of the ELVAX resin area with low M of vinyl acetate, usually from 9 to 15%, are well suited for adding to the initial insulation of construction wires of the XHHW type included in the UL list,

North American stainless

Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 Introduction Types 2205 and 2304 are duplex stainless steel brands with microstructure

This presentation is kindly provided

This presentation is kindly provided by the CPP Expo Presentation “Achievements in the Flexible Packaging”, September 2005. Nancy Smith program basic types / functions of adhesives used in flexible packaging additional information

Dupont Kapton HN.Polyimide film

Dupont Kapton HN Polyimid Film Technical Passport Universal film Dupont Kapton HN is successfully used at temperatures from.269 ​​C (-452 F) up to 400 C (752

Hostaform C 9021 Rumor

Description Chemical reduction in accordance with ISO 1043-1: POM Formation mass ISO 9988- POM-K, M-GNR, 03-002 Copolymer POM standard casting under pressure with high stiffness, hardness and shock viscosity;

Our undivided attention.

Our undivided attention. ECDEL elastomers Eastman are proud of its health care obligations. Supplying plastics and chemicals for medical devices since 1935, Eastman built

Bioplasty and stability

Seminar for Bioplastics and Sustainable Development Packaging for food products on a biological basis Francois de Bi 29.06.2015 Corbion Purac Pla from a cradle to a life cycle 2 bioplasty on the market today Albert Heijn Flex Pack 100% Pla Coca-Cola

Fishing line for a trimmer of innovative packaging Pen

An economical, universal fishing line for a trimmer of innovative packaging foam Cell-aire Poopolioli-polyethylene of low density, representing the Cell-Aire foam penulasts Packaging material from Cell-Aire Penomaterial. cleaner and more effective

3M Ionic Liquid Antistat FC-4400

Technical data September 14 3M Ionic Liquid Antistat FC-40 Introduction 3M Ionic Liquid Antistat FC-40. Antistatic supplement of high purity, compatible with various highly effective polymer systems,

North American stainless

North American flat rental of stainless steel sheet of stainless steel T409 NAS 409 introduction. This is a stabilized ferritic stainless steel with m 11% chromium.It is not so resistant to corrosion or high.temperature oxidation

HKAS666O nylon antistatic film

Technical characteristics HKAS666O Nylon antistatic film HKAS666O. This is a nylon film of a special composition based on polyamide resin nylon 6. This strong universal film is ideal for demanding physical exertion

Polymer additive General review

Polymer additive Dupont Fluoroguard General Review Dupont Fluoroguard. This is a series of chemically inert polymer additives without color, smell and smell based on fluorine synthetic oil.Fluoroguard developed

Makeup epoxy glue

A series of basic materials Epoflex MSC Polymer AG offers flexible basic materials from simple unilateral flexible boards, flexible and hard applications to very complex multi.layer boards. Dielectric

Notes for the review of the polymers reoology

1 Why Reoology is important? Examples of its importance of the summary of important variables describing the equations. Laminar VS.turbulent. The number of Reynolds. Determination of viscosity

Disco cleaning procedure

1 of 6 Disco cleaning procedure Click for printing. To obtain additional information, write to us at: [email Protected] Disco cleaning procedure for extrusion coating of resin for packaging Surlyn resin from nucleic acid copolymer

Foam film FLEX-WRAP pipes

Flex-wrap Flamp Flex-Wrap Fleet Inexpensive is used to wrap all pipes with a concrete mixture. Satisfies UPC CODE SEC.315.7 provides true space for expansion between the pipe and concrete filling of the product size

Paam Commercial Private Limited

Metal packaging We at the Paam Group provide our customers with a wide range of packaging products in accordance with their preferences, needs and technical specifications. Provide all the necessary materials from metal

North American stainless

Sheet 430 (S43000) / EN 1 of stainless steel for North America.4016 Introduction: SS430. This is a low-carbon chrome fervorite stainless steel without any stabilization of carbon

New thermoplastic foam on a biological basis

New thermoplastic foam on a biological basis biomaterials for industrial use 22.5.2013 Startup Sauna, Espo Otaniemi Tero Malm VTT Center for Technical Research Finland 2 Brief Motivation Introduction

In order not to cut metal pipes or a sheet of iron in the eyes, some home builders use grinding machines to make home.made products, rigidly fixing them on a vertically installed spindle. When moving the tool from top to bottom, a stable uniform section of the part located under the disk occurs, if the metal guides are fixed on the machine bed, when applying the workpieces on them, any desired cutting angle can be obtained.

Cutting pipes of large diameter

The metal profile of large diameter has thick walls and a large weight, if for cutting thin.walled parts (wall thickness up to 2 mm) you can use thin discs in size about 1 mm, then 2 mm is taken for cutting thick.walled metal. Disk circles. Accordingly, it is more convenient to cut thick walls with a large diameter disk using a powerful large.scale construction grinding machine. Household appliances do not have enough power to quickly work, and their small discs are quickly polished.

When performing work, they are guided by the following rules:

• When cutting heavy pipes, they should be placed on a flat surface or on low supports, so that when cutting the last section it does not change its position or does not fall, not allowing the cutting tool to compress its walls.
• If the surface is flat, each line is completely cut, turning the part, with uneven support, the last jumpers are slightly cut off, which allows you to divide the workpiece under its own weight, after which the protruding area is crushed.
• When working with a grinder for cutting heavy metal elements, it is necessary to use a protective coating. The probability of disk stratification into individual elements is too high.

Other tools for cutting plastic pipes

They are rarely used when there is no pipeline at hand:

• Corner grinder. for cutting pipes, a cutting disk for metal will be required. The main point in the operation of the corner grinder is the exact regulation of the effort, it is impossible to crush too much on the tool.
• Electricity is the most convenient way in the absence of special scissors. It is likely to get an oblique cut, so for greater accuracy during operation, the pipe must be turned several times.

What is categorically not recommended to cut pipes:

• Ribbon saw. its blade moves too slowly and if it is not insufficient enough, the probability of damage to the internal diameter of the pipe is great, which leads to chips and cracks.
• Circular machine. Since plastic pipes are flexible, pushing them into the machine often causes a pipe displacement and blow, which is dangerous for a person producing a cut.

Polypropylene film for casting and blowing

Hofer Vliesstoffage 2015.

Hofer Vliesstoffage 2015 Advanced Polymer Film Control Systems for the Analysis of the process and output optimization, complete integration into production.Michael Collurt Mondi Gronau GmbH

Treofan packaging films

Treofan P A S I O N O V A T I O N PACCECTIONS Assortment of products Review of the use of the group Treofan Who are we Treofan Group. Leading manufacturer BOPP, offering the most complete assortment

How to create a sox

Co.sealing film structures from PLA and EVOH, represented by: Pablo J.Garcia, Cuuray America Inc. Description of the Eval Business Prerequisites and PLA and Evoh Method and Materials Results

Ve tekni̇k özelli̇kleri̇

Çok katmanli ambalaj fi̇lmleri̇ ve tekni̇k özelli̇kleri̇ muharrem demir www.Apack.com.TR 2 Katmanli PA 30 μm PE 70 μm PA = polyamide (foundation-base) PA / PE 30/70 PE = polyethylene (sealing layer) 5 katmanli additional information

Unique technology from Kuraray

Evoh barrier film unique technology from Kuraray Kuray Co., Ltd. He is the world leader in the production and development of EVOH resin (copolymer of ethylene alcohol) under the Eval trademark. Eval

Wiring and cable guides

The guide for wires and cables of the ELVAX resin area with low M of vinyl acetate, usually from 9 to 15%, are well suited for adding to the initial insulation of construction wires of the XHHW type included in the UL list,

North American stainless

Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 Introduction Types 2205 and 2304 are duplex stainless steel brands with microstructure

This presentation is kindly provided

This presentation is kindly provided by “achievements in adhesives for flexible packaging”. Presentation CPP Expo, September 2005., Nancy Smith. Agenda. The main types / functions of adhesives used in flexible packaging. Lamination

Dupont Kapton HN.Polyimide film

Dupont Kapton HN Polyimid Film Technical Passport Universal film Dupont Kapton HN is successfully used at temperatures from.269 ​​C (-452 F) up to 400 C (752

Hostaform C 9021 Rumor

Description Chemical reduction in accordance with ISO 1043-1: POM Formation mass ISO 9988- POM-K, M-GNR, 03-002 Copolymer POM standard casting under pressure with high stiffness, hardness and shock viscosity;

Our undivided attention.

Our undivided attention. ECDEL elastomers Eastman are proud of its health care obligations. Supplying plastics and chemicals for medical devices since 1935, Eastman has built its

Bioplasty and stability

Seminar for Bioplastics and Sustainable Development Packaging for food products on a biological basis Francois de Bi 29.06.2015 Corbion Purac Pla from a cradle to a life cycle 2 bioplasty on the market today Albert Heijn Flex Pack 100% Pla Coca-Cola

Fishing line for a trimmer of innovative packaging Pen

An economical, universal fishing line for a trimmer of innovative packaging foam Cell-aire Poopolioli-polyethylene of low density, representing the Cell-Aire foam penulasts Packaging material from Cell-Aire Penomaterial. cleaner and more effective

3M Ionic Liquid Antistat FC-4400

Technical data September 14 3M Ionic Liquid Antistat FC-40 Introduction 3M Ionic Liquid Antistat FC-40. Antistatic supplement of high purity, compatible with various highly effective polymer systems,

North American stainless

Flat stainless steel products for North America a sheet of stainless steel T409 NAS 409 Introduction. This is a stabilized ferritic stainless steel with m 11% chromium.It is not so resistant to corrosion or high.temperature oxidation

HKAS666O nylon antistatic film

Technical characteristics HKAS666O Nylon antistatic film HKAS666O. This is a nylon film of a special composition based on polyamide resin nylon 6. This strong universal film is ideal for demanding physical exertion

Polymer additive General review

Polymer additive Dupont Fluoroguard General Review Dupont Fluoroguard. This is a series of chemically inert polymer additives without color, smell and smell based on fluorine synthetic oil.Fluoroguard developed

Makeup epoxy glue

A series of basic materials Epoflex MSC Polymer AG offers flexible basic materials from simple unilateral flexible boards, flexible and hard applications to very complex multi.layer boards. Dielectric

Notes for the review of the polymers reoology

1 Why Reoology is important? Examples of its importance of the summary of important variables describing the equations. Laminar VS.turbulent. The number of Reynolds. Determination of viscosity

Disco cleaning procedure

1 of 6 Disco cleaning procedure Click for printing. To obtain additional information, write to us at: [email Protected] Disco cleaning procedure for extrusion coating of resin for packaging Surlyn resin based on nucleic acid copolymer

Foam film FLEX-WRAP pipes

Flex-wrap Flamp Flex-Wrap Fleet Inexpensive is used to wrap all pipes with a concrete mixture. Corresponds to the UPC SEC Code.315.7 provides true space for expansion between the pipe and concrete filling of the product size

Paam Commercial Private Limited

Metal packaging We at the Paam Group provide our customers with a wide range of packaging products, depending on their preferences, needs and technical characteristics. Provide all the necessary materials from metal

North American stainless

Sheet 430 (S43000) / EN 1 of stainless steel for North America.4016 Introduction: SS430. This is a low-carbon chrome fervorite stainless steel without any stabilization of carbon

New thermoplastic foam on a biological basis

New thermoplastic foam on a biological basis biomaterials for industrial use 22.5.2013 Startup Sauna, Espo Otaniemi Tero Malm VTT Center for Technical Research of Finland 2 Brief description of motivation Introduction

Black sheet of polypropylene cut in size | The Plastic People

Black polypropylene sheet

Order a black polypropylene sheet cut to order, cut for the size or shape you need.

Our black polypropylene sheets work miracles for various areas of application. wherever they are needed.

If you know the exact size of your order from black polypropylene, we will immediately provide you with a price offer.

All you need to do is enter your requirements in the calculator.

If you are not sure of anything related to ordering polypropylene to order, contact us.

In the meantime, scroll down to find out everything you need to know about black polypropylene. from properties to targets.

The main characteristics of the black polypropylene sheet

When it comes to black polypropylene sheets cut in size or shape, there are a number of key features that make them ideal for many different purposes.

High flexibility. Black polypropylene has elasticity in a certain deviation range.

High impact resistance. Black polypropylene sheets retain the shape after strong twisting and bending.

Light. Black polypropylene has a low density compared to other common plastics, which makes it desirable for manufacturers and distributors.

Insulation. Black polypropylene has very high resistance to electricity, which makes it useful for electrical components.

Low cost. Black polypropylene is an affordable alternative to other materials and is an excellent price ratio and quality.

Extremely durable. Black polypropylene is very durable and almost not beating plastic.

Good chemical resistance. Black polypropylene sheets are resistant to water and chemicals, as well as diluted and concentrated acids, alcohols, alkalis and mineral oils.

Low moisture absorption. This means that it is more than capable of withstanding almost any environment in which it is used.

Another important thing that should be noted is that our black polypropylene is approved by FDA. This means that this type of plastic is completely approved for contact with food products. Whether it is production or storage.

For example, this makes black polypropylene sheets ideal for wall cladding in hygienic rooms.This may seem like a very simple everyday task, but since not all plastics meet the requirements of FDA, black polypropylene in this case is a good and reliable choice.

And, when you can order a black polypropylene sheet made to order, which exactly meets your requirements. The possibilities are limitless!

How to order pruning in size or form black polypropylene

Order black polypropylene sheets with The Plastic People quickly and easy.

First of all, when it comes to custom.made orders of this kind, you need to have an approximate idea of ​​the size of the plastic that you need before you receive or place an order.

For orders in size, sheets are available in three different thicknesses (measured in millimeters, centimeters and inches).

You can also select the width (maximum 2440 mm) and the length (maximum 1220 mm) of the sheet, as well as any additional options.

These can be holes that need to be drilled, for example, in plastic.

The same applies to orders from black polypropylene. Only this will depend on the form you have chosen.

If you plan a different form compared to six default figures listed by default, you can download the drawing to show us your specific requirements.

In this case, instead of filling the calculator of the price higher, you can find more productive receipt of by e.mail. This will help us better understand what you need, and accordingly evaluate the work.

As for delivery. Standard delivery usually takes 3 days (although delivery of orders with additional additional services can take up to 5 working days).

Otherwise, you can make an order through our delivery service the next day or through the service delivery service, if you think this is a more convenient day.

To obtain additional information cm. Our delivery and return page.

If you have other special Комментарии и мнения владельцев, you can tell us about this in the “Комментарии и мнения владельцев” field when placing an order.

That’s all. If questions arise, we will contact you.

Related accessories

Unfortunately, at the moment there are no accessories for this product.

Help and consultation

To receive additional assistance, tips and examples of innovative use of plastic in the house and garden, why not visit our blog .

Technical description

High.quality cutting polypropylene pipes. How to cut polypropylene pipes? Types and features of tools, technology for cutting with precision scissors, recommendations of specialists

Due to the growth of popularity and prevalence of polypropylene pipes (propylene polymer) used to arrange water supply and other communications systems, the demand for a specialized tool that facilitates the work with the material has increased significantly.

Special, exceptional attention is in the right choice of a model of scissors cutting polypropylene pipe products. This greatly simplifies the preparation of the entire set of parts for the installation of wiring.

As a rule, direct segments (up to 12.0 m) are implemented on the market, although polypropylene pipes in the bays are often found, used to install a warm sex system.

Watch the video how to choose pipe cutting scissors

The main types of instrument cutting propylene pipes

All modifications of the equipment produced for cutting thermoplastic polymer propylene pipes are divided into several structural options.

Precision scissors-have a fairly simple, reliable crack-cutting mechanism. With this tool, you can dissect and fragment products with a diameter of 3.0–41.5 mm. The cutting tool has a steel blade (alloyed brand) with a jagged rail that allows you to perform quite light, even cuts of propylene pipes.

Using precision scissors, you can easily cope with one hand, however, with large volumes of fragmentation of the material, fatigue of the muscles of the hand, forearm and shoulder rapidly increase. Buying a tool involves the design of an annual guarantee that is valid only with the competent use of scissors.

The battery pipeline is an automatic tool for superbust (a maximum of 7.0 seconds), neat cutting of propylene pipes, medium thickness (8.0–29.5 cm). Compressive power of cutting surfaces provides a small, powerful electric motor.

Roller pipeline. convenient to work modification of the cutting polypropylers of the tool. Despite the uncomplicity of its design, the employee can perform an absolutely even cut. In this case, cutting of pipe elements is carried out at an even (90 degrees) angle.

Attention! Any retreat in the process of cutting from an even, right angle (90 degrees) can provoke a breakdown of the tool or deformation damage to the lines of the cutting!

Roller pipeline instruments are with telescopic elongation. Such tools are equipped with a ratchet and, in general, resemble ordinary scissors. This pipeline has, on the one hand, the C-Formen Walking, where the trimmed pipe is placed. The opposite side contains an acute cutting blade. It after closing the handles with a brush cuts off the pipe in a flat plane.

Guillotine pipeline device used to cut large diametral pipes (63.5–350.0 mm). The tool is characterized by the presence in the design of a high.strength, sharply bidden blade covered with Teflon. A flat installation of the pipe, as well as unhurried cutting with very sharp blades contribute to the maximum smoothness of the end surfaces. This greatly facilitates the implementation of subsequent electric welding without additional processing of pipe ends.

Recommendation! When there is no specialized tool for cutting pipes from polymer pipe, you can use a special hacksaw for metal or wood. It must be remembered that the slightest violation of such a technology can spoil the trimmed pipe. In addition, the end plane of the cut must be additionally cleaned from burrs and forming chips, and this takes a lot of effort and is spent extra time!

The choice of a specific type of polypropylene pipes to certain conditions

For cutting pipes from polypropylene material, the scissors are chosen for the specific value of their diametral value. Manufacturers today represent piping material in four versions:

-RN-10-choose to create a “warm floor” system and cold water supply. The coolant should not be hot 45.0 C, and intraurular pressure should be maintained at 1.0 MPa;

-RN-16-is suitable for wiring chilled water, as well as for conducting pipelines of a central heating system. The coolant is supplied at low pressure. not more than 1.7 MPa;

-PN-20 is a universal version of the pipe actively used to install hot, warm or cold water supply. Mandatory conditions for installing pipes PN-20: maximum internal pressure 2.1 MPa, and the temperature of the coolant is not more than 80 s;

-PN-25-pipe material reinforced with aluminum foil. This solution allows you to withstand the internal pressure of 2.6 MPa and the maximum water temperature in 95 s pipe walls. Such a type of pipes is perfect for the installation of central heating and hot water supply.

Important! The choice of type of pipe from polypropylene should be carried out carefully, with meticulous accounting of temperature and water pressure in the system, since the direct life of the pipeline depends on these factors!

In addition to various pipe products made of polypropylene, manufacturers make many connecting parts and combined elements. The latter are often equipped with up.up brass inserts with internal or external threaded cutting. Metal inserts make it easy to perform hermetic compounds and switch to other materials.

Remember! Only professional, high.quality modifications of the cutting tool can effectively cope with sharp polypropylene pipes, despite the thickness of their walls and diameter!

How to cut polypropylene pipes? Principles of choosing a good tool

First of all, when choosing a high.quality tool for cutting propylene pipes, it is necessary to build on the planned intensity of its subsequent application. Когда нужна одно- или двукратная резка, вполне сгодятся прецизионные или роликовые ножницы.

Which categorically cannot be used for cutting

Ribbon saw. the instrument disk is spinning very slowly for this work, and if the teeth of the saw are not acute enough, damage to the inside of the pipe is possible, this will cause cracks and chips.

How to mark and cut off the pipe exactly. Pipe marking.

Circular machine. polypropylene bends well. During pushing into the machine, there is a risk of bending the material, a blow is possible, which can lead to injuries of a working person.

A self.substituting knife (with cloves) is more difficult to work, the reason is that in the middle of the pipe there is a layer of aluminum. But if there is no other tool, you can prepare several segments.

The disadvantages of these methods are that when working, plastic begins to “shake”, parts of the material appear at the joints, they can subsequently get into the pipe and clog the filter during the operation of the system. And nobody needs it. To eliminate such shortcomings, use several additional tools.

• FACKOSARER. used to align the edge of the cut and as a result for the better quality of welding. It allows you to remove the edge or remove the upper part of the plastic along the diameter of the pipe;
• Calibrator. if during cutting you crushed the cut, and it became oval, this tool will allow you to level the end. For different diameters, you need to use your calibrator.

When planning the assembly of the pipeline from polypropylene pipes, you need to think over the process of work in advance and prepare the tool. The required set of tools is selected taking into account the complexity of the assembly, the diameter of the pipes and the size of the pipeline.

Rothenberger

Rothenberger pipelines are of high quality and convenient design. The cutter for polypropylene pipes can dissect products with a diameter of 0.6 to 4.2 centimeters. The cutting element of the device is very sharp and durable, which allows you to cut pipes with thick walls, without leaving any defects at the cut site.

The tool handles are equipped with a latch, which ensures the possibility of safe storage of the tool, and also allows you to carry it with you. On the handles there are rubber pads, which makes work with the tool more convenient. There is also a special button on the case, when pressing which the support and cutting rail return to the original open position. The disadvantages of these devices include a fairly high cost compared to analogues from other manufacturers.

Roller cutter

Before fixing the pipeline on the walls and the installation of its individual segments, the blanks must be cut into a single system, giving them a suitable size.

Use roller cutter gently. Consider some features of the operation of the pipeline:

• The workpiece should roll between the wide rollers and the cutting part;
• The cut is flat, therefore, when the pipes are installed, there is no damage to the rubber sealing ring;
• The procedure for cutting blanks using this cutter takes quite a lot of time.

The roller cutter is necessary when cutting sewer pipes of significant size. The tool is used when working with pipes, with a diameter of 50 to 110 mm.

Cutting is performed in a certain sequence. Immediately you need to mark the cutting place. Twist the screw, bring the bracket to the place of cutting. To fix the clamp, you need to slowly rotate the screw. At the same time, do not make excessive efforts. Otherwise, the pipe may be damaged. Next, rotate the cutter around the workpiece. A few minutes later the parts of the product will occur.

How to cut monolithic and cellular polycarbonate

For monolithic polycarbonate as a tool for cutting it, a disc saw with non.large teeth may be suitable.

In order for polycarbonate not to heat up, it will be optimal for the teeth of the tool to have special hard inserts.

• If the sheets are thin not more than 2 mm, the optimal and convenient solution will cut at once several somewhere from 10 sheets.
• If polymer plastic is thicker than 1 cm, then you need a hacksaw with diluted teeth.
• You can also use an electric corner grinder with a jigsaw, but at minimum speed.
• Cellular polycarbonate at home is also subject to cutting. But it must be done in several stages.

At first it is cut outside, then turned over and cut on the back, if a cut is possible along the ribs of stiffness. But if you need to cut off polycarbonate across the ribs of stiffness, then we do everything, the same, but we also carefully cut the partitions inside the third stage.

Polycarbonate cutting errors

Take into account this before you work with polycarbonate.

If there is no need to cut polycarbonate on an industrial scale, this can be done in private in your territory.

The above methods are absolutely not complicated, like tools that use as cutting polycarbonate in domestic conditions, you probably have to pout.