How to make a tile cut out of a grinder. What is required for the manufacture of tile cutter

DIY tiles from a grinder

This procedure is performed without any problems, just follow the manufacturer’s instructions.

• Outline the cutting line. This can be done with a felt.Tip pen or pencil, marker. Depending on the surface of the product. For models with a laser pointer, this item can be skipped;
• The tile is fixed on the platform so that the cut line and the wheel are combined as accurately as possible. If you need to make a diagonal incision or at an angle, it is convenient to use a model with a square and an angular marking. If the simplest device is used, without supporting corner sides, the tile is simply unfolded into the right position;
• Moving the carriage, an even incision is carried out to the end of the tile;
• Lower the lever, thereby pressing on the tile on both sides of the incision. Ceramics split along the cutting line.

If the exposure of the lever is not enough, you can put the tile on the floor by arranging a narrow bar under the cut line, and at the same time press (step with your feet, put heavy objects) on both sides of the cut.

Important: Increasing the distance from the cutting line to points of the load application, of course, increases the lever and reduces the force of exposure. But at the same time, this increases the risk of a fracture of the panel not by cut, but arbitrarily

• The incision is performed once, several times should not be carried out in one place. The collapse will be uneven, with jagged edges;
• The force attached to cut the glaze should be strictly dosed, as well as the impact on the lever for breaking the panel. It is better to practice waste or unnecessary trimming before performing responsible work;
• The backlash of the cutter (wheel) and its incomplete mobility (sequel, jerking) are unacceptable, the device must be adjusted and lubricated before starting work;
• Before sharp, check the cleanliness of the platform (the presence of garbage, fragments, large dust) and its stability.

Cutting porcelain tiles should be on the same principles, making an amendment to the greater strength of the material. It may be necessary to make more efforts to perform the cut and break the panel.

In addition, a short video on how exactly works manual tile cutter of a standard design.

What is required for the manufacture of a home.Made tool

The electric device is much more expensive in manufacturing than mechanical, but it is more convenient to work with it, and the quality of cutting tiles will be much higher. For its manufacture, the following will be needed:

• Table or workbench
• A grinder with a diamond disk;
• Metal platform;
• Two steel pipes;
• Fasteners;
• Clamps.

You can save on the equipment if you buy a cheap cutting element, but this is not recommended to do this, since the quality of the cut and productivity of the work depends on it.

Instrumentation tips

A tiles from a grinder is a simple tool in operation, but, as in the case of any electrical equipment, when working with it, the following safety regulations should be followed.

• Cut the tiles in the direction from yourself, without creating too much pressure.
• It is recommended to start cut on the outside of the tile.
• If you need to cut the tile, then it is better to fix it with special forceps. This will allow you to do work better.
• It is strictly forbidden to work with the instrument while intoxicated or after the adoption of antihistamines, since this can cause injuries.
• If you have never worked with such equipment before, then before cutting the tiles it is recommended to practice a little so as not to inadvertently spoil it.
• So that the cut line is perfectly flat, you need to draw a straight line on the tile with a simple pencil.
• Cut the tiles in the goggles to prevent dust or fine crumbs.

Types of homemade tiles

Depending on the design features, these devices are divided into 2 types:

The mechanical is a platform on which the tile will be fixed and cut. Usually take a thick board with a flat surface for this. The guides and the cutting element are attached to it, as which they usually take glass cutter and change the cutting head to the blade. You can see a home.Made mechanical tool in the figure below:

The electric device has a more complex design, but it is more practical to use. The principle of its work is similar to the functioning of the grinder. It will also require a flat platform for its manufacture, on which an electric tool is fixed instead of glass cutter. So that the grinder does not vibrate and cut the tiles evenly, for its fastening it will be needed by steel pipes. Electric glass cutter looks like in the next figure:

It is worth noting that on sale there are equipment for cutting tiles with water cooling. Undoubtedly, such devices are the best, since they have more performance, but it is impossible to make them on their own at home. Therefore, this article will consider the process of manufacturing an electrical device. It does not require large financial costs, and every person will be able to cope with its manufacture.

What disk to cut ceramic tiles with a grinder?

At least 6 varieties of disks are distinguished, suitable for use with an angular grinding machine. The quality of the work and the achievement of various results at the request of the master will depend on the choice of the nozzle.

Stone discs

Sharp nozzles are most often made from stone. They are a strong base with a thickness of at least 6 mm. Thanks to a massive basis, stone discs are ideal for sharpening tools, with which ordinary thin nozzles are not able to cope.

As a rule, stone cutting discs are not suitable due to their large thickness. But they can make more sharp improvised tools with them without much effort. A stone circle with glued petals of sandpaper is suitable for grinding work work. Tile stripping is recommended to be carried out with a soft abrasive with marking No. 120, 150, 180.

Steel discs

Steel is a complex alloy of iron with carbon and impurities in the form of silicon, sulfur, manganese and phosphorus. Carbon component, the content of which does not exceed 2.14%, gives steel high indicators of strength and hardness. This allows you to use metal as a basic material for the production of cutting discs for a grinder.

Another option for covering steel nozzles is electrocorund. This is an abrasive of crystalline clay or synthetic corundum that increases the sawing properties of the disk. Such nozzles are marked in blue and used to cut a variety of metal elements. Profiles, sheets, corners, reinforcement and pipes.

Such no longer can handle such nozzles without difficulty, even if you have to work with very thick floor tiles and porcelain tiles.

Segmented dry cutters

The disk of this modification is also made of steel, but differs from the standard nozzle by the presence of slots. They are located along the edge of the product towards the central part and divide it into equal segments.

Segmented disks-dryers are used to process a very durable tile made of porcelain tile and natural stone material. Due to the presence of segmented slots, the nozzle serves longer than other models. Increases the life and air cooling during cutting.

5 Ways To Cut Tile. Everything You Need To Know For Your First Tile Project

The only drawback of dry cutters is the high probability of chips formation.

Continuous dry cutters

The nozzle of a continuous type, despite the name, is used for wet cutting. It is devoid of incisions responsible for thermal unloading, therefore it requires the use of coolant. Water supply to the cutting area. Due to the tendency to overheating, continuous dry cutter is constantly working for no longer than 15 seconds. On idle it is left for another half a minute for cooling.

Failure to comply with this rule will lead to the fact that the silver solder will be weakened, the diamond coating will be erased, and the circle will lose its original shape.

Continuous dry cutting provides a better cut. The most important thing is not to forget about the water supply. Its admission can be provided by connecting the hose or fastening of a specialized device.

Combined disks models

Disks for cutting tiles with a grinder received a similar name due to the ability to work both on dry and wet move. This is an intermediate option between segmented circles and dry cutters:

Diamond circle

A lawsuit for cutting ceramic tiles for a grinder with diamond spraying is the most expensive, but at the same time the highest quality option for a grinder. What is capable of cutting a diamond circle:

Carbonly spraying on the nozzles has different stiffness and composition.

Cutting tiles with a grinder with a diamond circle is allowed only by those diamond discs, the spraying of which is compatible with tiles.

Diamond nozzles for a grinder are also continuous and segmented. Highlight another variety-turbo-circles. They are used where you need to cut the tile at an angle with a high speed.

How to make a machine for cutting tiles with your own hands

Ceramic tiles are one of the most non.Impudent coatings. She is not afraid of moisture and a sharp change in temperature conditions, easy to care and styling. True, installation work involves pruning tiles. In order for the sections to look neatly, it is necessary to use special equipment called the tile cutter.

Types of tiles

To date, the market presents several options for machines that are designed to cut the tiles. Conventionally, they can be divided into two groups: mechanical and electrical. The former are used if we are not talking about an industrial scale of work.

Say, for repair in your apartment, just arm yourself with a mechanical tool. But if repairs are professional activities, it is better to purchase a good electric tool once.

When using a mechanical tool, a power source is not needed. All work is carried out by a person, acting a simple mechanism. Such machines are not recommended if the thickness of the tile is more than 1.5 cm. There are models designed to work with ceramic tiles, the length of which does not exceed 40 cm.

As a rule, such a tool can easily cope with wall tiles, the width of which is an average of 8 mm. But the slices are far from ideal. There are multifunctional machines, with which you can not only cut the tiles into parts, but also cut round holes.

It is advisable to use electric machines if you need to work with thick tiles or work is not limited to circumcision of 10-20 tiles. Electric tiles have a fairly large weight, which complicates their transportation.

When choosing electrical equipment, you should pay attention to the presence of water container. If there is no one, then during the cutting of ceramic tiles there will be a lot of dust. The presence of water container partially solves this problem. In addition, such a tool will serve longer.

Teling cutters have a different pricing policy. This is a tool on which you should not save. Cheap machines will not be durable. And the cut made on such machines does not look very aesthetically pleasing. If you do not want to give a tidy amount, then you can make a tile cut with your own hands. Over, you can make both a mechanical machine and electric.

We make mechanical tiles with our own hands

Manual tiles is a safe tool, and does not require connection to the electric network. These two factors ensure the popularity of this model. In addition, such a tool, due to a small weight, is easily transported and you do not have to spend a lot of money on its manufacture.

Manual tile cutter consists of a platform on which the ceramic tile, guide, cutting element and handle, must be located directly, with which the entire mechanism is driven by the entire mechanism. The main structural element is the cutting element.

As the latter, it is advisable to use the most ordinary glass cutter. But, from it you need to first remove the head on which the cutting element is located directly.

In addition to the cutting element, it is necessary to prepare:

• 2 bearings and shaft for them;
• A tube of steel, the diameter of which is identical to the diameter of the shaft;
• 2 steel corners, size 40×40 cm and 4 corners in size 20×20 cm (the length of each element should be an average of 60 cm)
• Material for the manufacture of a working surface;
• Rubber and glue.

In addition to building materials, you need to arm yourself with a welding machine. Without it, it will not work to make a mechanical tile cut with your own hands.

From 1 corner with dimensions of 40×40 and 2 corners of 20×20 dimensions, half of the required device is built. We take a larger corner in size and to its ends on the outside we weld smaller corners. Similarly, you need to make the second part of the device.

The first and second part of the tile cutter should be symmetrical in relation to each other. These elements are fixed on the platform. They need to be fixed in such a way that the cutting part of the structure moves freely between them.

A hinge element is used to install them. Since the cutting element will fall below the ceramic tile itself in the middle of the platform should be a recess.

Otherwise, the platform will be damaged by the first use.

The last stage is the creation of a cutting structural element. To the steel tube, it is necessary to weld the handle on one side, and on the other. A latch for a cutting element. By and large, the work is practically completed on this work. When pressing the handle, the diamond disk should reach ceramic tiles.

Then, smoothly moving the mobile part of the structure for the same handle, the diamond disk leaves an even incision on the tile. In order for the design to move freely the movable part must be equipped with bearings. For better fixation of the tile on the working surface of the equipment, you can glue the rubber strips at its edges.

We make an electric tile

Making an electric tile cutter with your own hands is much easier than it seems. You need to prepare metal and cutting electric tool. As the latter, it is better to use a grinder. Start work with the manufacture of the work surface. The most ordinary table may be the latter.

You can cook the table yourself. In this case, the countertop is made from a sheet of metal. Since the circle from the electrical device used will act as the cutting element, there should be a recess in the center of the working surface. It will move the cutting element and at the same time not damage the platform. Such a tool will turn out to be stationary.

Practical recommendations

First of all, a metal sheet is attached to the working surface. But before that, it is necessary to cut out the gap into it, which will be included in the tile cutter disk. The size of the sheet, more precisely, its width, should be selected so that even the largest tile can accommodate under the disk. The entire cutting process is controlled by the hands, that is, the tile is moved on the table forward under the cutting element itself.

The Bulgarian is attached to the table (both in the first and second cases) with the help of clamps at the expense of nuts and counter.Hawks. In order for the body of the grinder to be left without damage, it is recommended to place clamps in rubber or polyhlorvinyl tubes. In advance, the clamps are adjusted in the shape of the diameter of the future tile cutter.

It should be remembered that with a vertical installation of a grinder, it remains without a protective casing, since it cannot be put on, it means that working with such a device is extremely dangerous. Therefore, it is better for the operator to be on the right or left side during the entire process, and in addition to use the protective equipment. Glasses, respirator and gloves.

If the home workshop is in one of the rooms of the apartment, then it is recommended to connect such a tile cutter to the vacuum cleaner. To do this, the bell of the leaving hose is fixed to the place where the cutting disc is located. And then during cutting, a grinder and a vacuum cleaner are turned on at the same time, which will help get rid of the outgoing materials of the entire process.

The Bulgarian for the base of the tile cutter is quite advisable, since the minimum of additional components are used for this. In addition, thanks to this tool, it is possible to achieve the required number of revolutions of the cutting edge in one minute. Otherwise, you will need to look for an additional gearbox that can give an indicator of 4000-5500 about./min.

For the cut to have a more perfect indicator, on the table surface, adhering to the parallelity of the disk, a metal corner is installed. Thus, adhering to it, you can achieve a high evenness of the cut.

Why is the Bulgarian needed exactly? With the help of a grinder, an automated tile is made. Manual models, including glass cutters with lobes, can form microcracks. This often becomes the reason that the tile is cracking during tapping. While the use of a tile cutter based on a grinder helps to avoid such defects.

To insure yourself, you can in advance with a pencil the future cut line. Further, a shallow incision is made on it with glass cutter, and only then a full.Fledged cutting is performed.

Install the grinder

You can fix the greenhouse to the bottom of the countertop in different ways. Make sure that the mount is hard and strong. This is important, because otherwise, when cutting tiles, the grinder can jam in the slots of the countertop. Also, when installing a saw, consider the possibility:

To exclude the twisting of the bolt, the spring washer of the grover is placed under its head.

The puck of Grover

Also, the tile cutter is attached to the countertop with clamping clamps made of strip steel made according to the drawing of the table. For laying between the “body” of the file and the table use wood bars. They should be made in the form of a grinder.

Self.Manufacture of tile cutters

When there is a large amount of work with ceramic products, you can make a tile from a grinder with your own hands. The most practical home.Made device that can be made from the Ushm is an electric.

The tool itself should be fixed on the machine so that the working disk is located vertically or horizontally. You can choose any. The main thing is that it is convenient to work with tiles. It is necessary to provide limiters for tiles so that it does not move off when cutting.

The table is suitable for the role of the machine. You can use the available or manufactured from metal corners. A sheet of metal is suitable for the working surface, divided in the middle into two parts. The groove should be mounted on the section of the section for the course of the working circle. It is recommended to make it so that it is possible to fill in water. This will help reduce the amount of dust and will cool the disk, which extends its service life.

Some craftsmen use an electric motor to mount a tile cutting device. But making a tile cutter from a grinder is much easier and more profitable, since this tool independently gains momentum, and a gearbox will have to be selected for the electric motor.

In order to cut a tile at home, it is not necessary to purchase a special device. Greener, heads on the shoulders and some improvised materials are enough.

To work with tiles, you can create a tile cutter with your own hands. Using this tool, the most accurate cutting of tiles is performed. The simplest tool option is a tile from a grinder.

In order to make a tile from a grinder with your own hands, you must first understand the features of this tool. It is helped to cut all types of tiles. Thanks to this tool, the highest quality tile section is made.

To carry out cutting, it is necessary to install a diamond or corundure disk on the tool. They must be reliably fixed in the tool.

How to Cut Tile for Beginners

Many people ask how to make tiles with their own hands? For this purpose, it is necessary to correctly install a grinder that is equipped with an appropriate disk. If the method of horizontal fastening of the grinder is used, then it is necessary to provide a strict vertical location of the working disk. When cutting the tiles, it is necessary to ensure that it is located in a perpendicular position to the cutting tool. The disk cutting process in this case is carried out on outstretched hands.

Tiles from a grinder

When laying tiles of a house, sometimes it becomes necessary to cut off unnecessary pieces from it, which is simply impossible to do without special equipment. If you do not have such an electrical device, then you can go to the store and buy it. But here one problem arises: too high cost, which imposes additional financial costs. Therefore, if you do not have specialized equipment, then you can make it with your own hands from a regular grinder.

Types of homemade tiles

Depending on the design features, these devices are divided into 2 types:

Mechanical is a platform on which the tile will be fixed and cut. Usually take a thick board with a flat surface for this. The guides and the cutting element are attached to it, as which they usually take glass cutter and change the cutting head to the blade. You can see a home.Made mechanical tool in the figure below:

Electric The device has a more complex design, but it is more practical to use. The principle of its work is similar to the functioning of the grinder. It will also require a flat platform for its manufacture, on which an electric tool is fixed instead of glass cutter. So that the grinder does not vibrate and cut the tiles evenly, for its fastening it will be needed by steel pipes. Electric glass cutter looks like in the next figure:

It is worth noting that on sale there are equipment for cutting tiles With water cooling. Undoubtedly, such devices are the best, since they have more performance, but it is impossible to make them on their own at home. Therefore, this article will consider the process of manufacturing an electrical device. It does not require large financial costs, and every person will be able to cope with its manufacture.

What is required for the manufacture of a home.Made tool

The electric device is much more expensive in manufacturing than mechanical, but it is more convenient to work with it, and the quality of cutting tiles will be much higher. For its manufacture, the following will be needed:

• Table or workbench
• A grinder with a diamond disk;
• Metal platform;
• Two steel pipes;
• Fasteners;
• Clamps.

You can save on the equipment if you buy a cheap cutting element, but this is not recommended to do this, since the quality of the cut and productivity of the work depends on it.

Production algorithm

If there is all the necessary materials at hand, then everything will be quite simple to do everything yourself. For fastening it is better to use Working trim with a large working surface. If one is not at the disposal, then it can be boiled from metal. Two metal sheets are perfect as the base, between which the gutter will be located.

The manufacture of the tool occurs in the following sequence.

• A special mount is fixed on the workbench, with which the tool will hold.
• Metal plates are installed on the working surface with the help of metal corners, between which 1 centimeter is left.
• From the side of the working surface a mobile limiter is installed. With it, you will move the tile along the work surface, and he will also not allow her to move aside when cutting.
• Lastly, a grinder is installed, which is fixed using a latch and clamps.

To make it more convenient to work with the tool, the grinder can be fixed on Mobile bracket. But this will be very difficult to implement due to a too complicated design, especially if you have no experience of performing such work.

There is another method of manufacturing, in which the grinder is attached under the table, it is simpler in implementation, but the convenience of operating equipment is preserved at the same time. For the manufacture of such a tool you will need a table with a large working surface, in the middle of which a hole is cut out. Its size should be enough for the disk can rotate freely. Next, the grinder is mounted using bolts. Two guides are fixed on the sides of it, along which the tiles will move during cutting.

The next video clearly demonstrates the process of manufacturing a tool for cutting tiles at home with a lower mount. Be sure to look at it, and you will succeed:

Instrumentation tips

A tiles from a grinder is a simple tool in operation, but, as in the case of any electrical equipment, when working with it, the following safety regulations should be followed.

• Cut the tiles in the direction from yourself, without creating too much pressure.
• It is recommended to start cut on the outside of the tile.
• If you need to cut the tile, then it is better Fix with special forceps. This will allow you to do work better.
• It is strictly forbidden to work with the instrument while intoxicated or after the adoption of antihistamines, since this can cause injuries.
• If you have never worked with such equipment before, then before cutting the tiles it is recommended to practice a little so as not to inadvertently spoil it.
• So that the cut line is perfectly flat, you need to draw a straight line on the tile with a simple pencil.
• Cut the tiles in Glasses, To prevent dust or fine crumbs.

How to carry the walls under the wiring?

Like any other construction and repair work, stroke can be carried out manually or mechanized.

• Chisel. A universal tool for working with any solid materials, from wood to stone. Used paired with a hammer. For mechanized stroke, a chisel for a perforator is used;
• Scarpel (female clan) or a shutter similar to a chisel and chisel tool for work with solid stone, concrete, brick and so on. It is also manual for power tools.

Since manual stroke is convenient only in small areas and not too hard materials. Otherwise the task becomes excessively laborious. Most often they use a universal and specialized power tool:

• Punch with a chisel or scarf installed in it. Depending on the material of the construction structure, the selected type of nozzle (including the width and material of the working part) and the drum of the perforator, you can perform more or smaller furrows. However, they are always uneven, with broken edges. It is also possible to fall out fragments of masonry/monolith/plaster in the process;
• Drill. Here, the work is carried out in several stages. First the holes are drilled (as usual) to the depth of the strob with a step of 1.5 2 mm. It is advisable to choose a drill with a diameter close to the required width of the strobe. Next, using the spatula, “choose” the material between the holes. The disadvantage of the method is the same as that of the perforator, a sloppy appearance and uneven edges of the furrow. In addition, a change in the mode of operation (lateral loads instead of axial ones during a spatular operation) can lead to a quick breakdown of the tool;
• Bulgarian or angular grinding machine. In both cases, special disks designed to work on concrete (brick, aerated concrete, and so on) are used to work. They cut out the edges of the grooves at the desired distance, after which, using any other manual or electric tool, remove the material between the cut through the cut through. In this case, even when working with a perforator, the edges are quite even;
• Strobores. This is a professional and quite expensive tool, rarely used by home masters, but it is it that allows us to make a maximum effect and quickly carrying out a stroke. Almost always this device is provided with an industrial vacuum cleaner.

Making mechanical tile cutter

The process itself does not take much time and does not require many details.

Materials

• Handle from the old drill or punch;
• 30x30mm corner made of metal with holes Ø 8mm;
• Two nuts 8mm;
• One nut 6mm with a stopping ring made of nylon;
• Washer 6mm;
• One bolt 6 and 8mm, 30 and 60mm long, respectively;
• Set of wrenches;
• Cutter.

Assembly (step by step)

• Insert a bolt (8mm) from the inside.
• Wrap a nut from the outside with an effort.
• Wind up a nut to another bolt so that it remains about 3 cm from the edge.
• Screw up to this level a bolt into the handle from the drill and tighten.
• Insert the bolt corner into the hole outside (6mm).
• Toward the cutting element from inside, put the puck and tighten with a nut with a stray ring from nylon.
• Check the rotation of the cutting element on the absence of a backlash.

DIY hand.Made tool is able to cut the tile up to 10mm thick. Due to the convenient handle, you can use great efforts during operation, which provides the quality of the section.

Small dimensions of tile cutter allow you to work in places with limited space. When working, you need to follow the safety rules, as well as use protective equipment (glasses and gloves).

How to make a tile cut with your own hands: the necessary materials for the tool

As already noted, often for working with tiles, people use home.Made tile cutting, but before using it, it needs to be done. As practice shows, it is not as difficult as it might seem at first.

Consider, What materials need to be taken to make a cutting cutting with your own hands for cutting ceramic tiles:

• The metal sheet is used to create the base of the tile cutter. The desired thickness of such a sheet varies from 4 to 50 mm.
• The Bulgarian most often acts as a tone roller for cutting ceramic tiles.
• The diameter of the clamps should be at least 0.8 mm and no more than 10 mm. This is a prerequisite.
• Nuts.
• Ring.Ups.

With the help of this simple set, you can collect your own tile cutting at home at home. At the same time, get an electric tool equipped with water cooling. Water in this case is necessary in order to cool the disk of the grinder, which always heats up when working to cut ceramic tiles. A similar type of cooling can be found in large saws serving for the cut of stones, for example, nephritis. In order to do everything correctly, the drawings of the tool with a description of each part are necessary and, preferably, with a detailed algorithm of the work itself.

How to choose an engine

If you are confident in yourself, then we start the process. For the manufacture of a tile cutter using an autonomous electric motor, you need to choose and mount a gearbox that helps install the necessary disk movement. From the technical side, this solution is quite complicated, so it is recommended to resort to another solution. To use a small grinder equipped with a manual regulation of the speed of the disk.

We make mechanical tile cutter

In order to make home.Made tile cutting, you need to prepare a platform on which the tile will be attached and the action is performed. You can make it from the board. The main flat surface without humps and depressions. The cutting element and guides will be mounted on the platform. As a cutting element, glass cutter with a removed head is mainly used, to which the blade is attached.

After the main details are collected, you need to find additional. If in your garage you have many spare parts from other devices, it will be easier to choose the rest. What will be needed:

• Glue and rubber;
• 2 small bearing and shaft for their work;
• Steel tube with a shaft diameter;
• Steel corners in size 20×20 (4pcs) and 40×40 (2pcs).

If you have a welding machine. Very good. If not, you can use the glue for metal. What is it for? In order to fasten the corners with each other and make a tile for a tile cutter with your own hands. In appearance, 2 P-shaped symmetrical details should be obtained. As you already understood, for this we need welding. You need to fix these spare parts on the platform so that the cutting element can move freely in the middle.

The tree is not particularly durable, therefore, metal strips are additionally installed on it, which are placed on hinges. In the middle, the board makes a recess that serves a groove for the cutting element. We need this groove so that during operation it is not to damage the platform with a glass cutter, which will fall below a little tile.

When everything that is described above is already ready to fix the blade. To do this, a steel tube is taken, to which the blade fixer is attached on one side, and on the other. The handle. The glass cutter blade is a diamond disk that takes to the tile on the platform when pressed on the handle. To create a cut, the handle must be carefully moved along the surface of the tile. Bearings are needed so that the mobile part of the device moves smoothly and smoothly. Check if the tile is assembled correctly. Lastly, the elastic bands should be attached along the edges of the board. The fact is that the tree slides, and the tile can move along the work surface. In order not to happen, rubber strips are attached. With your own hands, you can start operating with your own hands.

We make an electrical device

Electric tiles more perfect. Its cost is greater than mechanical, but it also works faster. In addition, it does not require the use of physical strength. The main thing is to observe all safety standards. Actions are on the principle of a grinder, therefore, the basis can be used by such a tool. The purpose in this case is the correct consolidation of the grinder on the platform. If in the previous version a glass cutter with a diamond disk is attached to the platform, then in this, according to a similar principle, you need to fix the grinder.

For a flat course of the grinder, it must be fixed on steel pipes. Between themselves, pipes are welded according to the type of fastening of steps on a stepladder. So you can adjust the height for different tile thicknesses. The last action. At the desired height, you should fix the ring in which the grinder will be clamped. It is advisable to fix the ring adjustable in diameter, for the possibility of changing the grinder. Do.It.Yourself tiles from a grinder is ready.

Option 1

The tile on the plank is served under a strictly fixed grinder under the table.

• This technical solution is the simplest, since it involves reliable consolidation of the cutting disk from the bottom of the countertop and the installation of the guide rail (HP) with the possibility of its regulation;
• Under the table you can put a bucket of water, which will slightly capture dust, and cool the disk.

What is required for the manufacture of tile cutter

The main element of a home.Made tile cutter is a grinder. Since there is no need to cut thick material, it is more convenient to use power tools with a small disk. Ushm is perfect for 115-150 mm. Over, a disk will be required with diamond spraying. It is impossible to cut the tiles with other.

Small Ushm is more convenient to adapt to a tile

If there is a finished table, it is used instead of a bed. Otherwise, it will also have to be made from a piece of steel slab. The device frame is welded from tubes or profiles. To fix the grinder itself, bolts, clamps will be required.

Additional upgrade

The tool can be supplemented with a dust collector. To do this, on the underside of the textolite base, a stroke is made about 4 cm wide and 1 cm deep. It begins next to the edge of the cutting circle, ends on the opposite side of the base, a few centimeters to the edge. A hole with a diameter of 3-4 cm is drilled in this place. A metal plate with a hole with a hole is mounted on top of it with the help of screws, which is welded by an adapter 4-5 cm long, cut off from a metal pipe. The diameter of the pipe is equal to the inner diameter of the duct of the vacuum cleaner, which is put on the adapter. Now, when the vacuum cleaner is turned on, all dust will be sucked out of the work area.

You can make the simplest guide device for a tile cutter, due to which the accuracy and quality of the resulting cut will increase significantly. For this, a metal plaster rule is used the required length. It is fixed using clamp on the tile (two.Sided construction tape is also suitable) at the right distance to the cutting line. Resting on the smooth edge of the rule, the tile cutting moves along it and makes a perfectly straight section.

DIY tiles from a grinder

You can make a tile cutter with your own hands from an old, unnecessary grinder to anyone. The manufacture of electric homemade tile cutter, just like manual, begins with the creation of its base. Given the risks of working with a grinder for health, the base of the glass cutter should be securely fixed to the table. During operation, it should not depreciate or fidget it.

Holders for a grinder are installed on the sides of the bed, and the power tool itself is fixed on them in such a way that it can freely move along the entire base, and its circle is free to reach the cut.

To make a tile from a grinder with your own hands or ordinary glass cutter, you will have to make a lot of effort and fantasize on this topic. Perhaps you have to add something from yourself, since today there is an Internet where you can watch a video about home.Made glass cutters, find its size and design.