Husqvarna’s grass braid stalls hot. Cooper adjustment

Husqvarna stalls at high speeds

During operation, a situation arises when, when pressing the fuel supply key, the aggregate turnover begin not to increase, but to decrease. A malfunction of this nature can be caused:

• etching of atmospheric air into the combustion chamber;
• problems with the circulation of a mixture of fuel;
• clogging the saapun in the lid of the fuel tank (cleaning the hole with a thin sewing needle);
• Incorrect carburetor adjustment.

When air sunses, when I operate ICE, it is necessary to check the tightness of the pipes and the integrity of the gaskets in the CPG. The problem with the circulation of the fuel mixture can be solved by the elimination of blockages in the fuel pipes leading to the carburetor. If a vacuum occurs in the tank and not receipt of the fuel mixture to the carburetor, it is enough to clean the soundtress with a thin needle and blow it with air.

Why stalls the chainsaw when you give gas when pressed, and does not start under the load at idle

There are frequent cases when the owners of the chainsaw are faced with their breakdown and it does not matter what kind of technique of this kind of technique, since the nature of the breakdowns has almost everyone the same. Well, here the chainsaw was stalled and what’s next? Undoubtedly, the equipment can be attributed to specialized services that will fix your “iron friend” for a fee for a fee

But as they say: why pay more?

After all, you can personally disassemble the tool and repair it, since the breakdown can be insignificant, and in the service for this you will pay a lot. But naturally, in order to return the tool to life, you need to be able to understand the reasons for its breakdown and ways to eliminate malfunctions. So let’s study! In this article, you can find answers to questions regarding situations where the tool simply stalls after direct pressing for gas. So, let’s get down.

Sighting information about gasoline trimmers for Husqvarna grass

Husqvarna 128r. Negative experience of exploration. Problem with “penny” spare parts.

The choice fell on this model, as I heard a lot of good reviews about the Husqvarna brand. He has a chainsaw Husqvarna 142. very satisfied. Husqvarna 128r chose as the most popular on Yandex market. Bought in early May 2010. I used it five times with pleasure. Then in mid.August went on vacation. After a month and a half, downtime did not start. Did not bother. There were about 0 degrees at night. I decided that next spring everything will work itself. And here is the middle of June 2011, and my lawn grass is above the belt on the site in general overflows gasoline. the candle all the time is wet. I took from the cottage to the official service at a company store in Khimki closed for reconstruction. Turned to the office. Service on the street. Vasily Petushkova After visiting this service, the desire to leave a trimmer there for the grass for repairs disappeared there. located in the utility room of the store. They refused to regulate the carburetor with me. A lot of broken equipment. The queue will reach no earlier than 10 days. announced. for adjustment. 1000, for a new carburetor (just buy them and put it yourself). 2600 but press that it may be necessary to replace the piston 6000. 7000 spare parts for the carburetor. Disassembled at home. Zama carburetor Model C1Q-W41. By the nature of the malfunction (gasoline flows even with a non.working motor through the carburetor and further through the air filter) Most likely problems with the needle valve. You can’t buy spare parts anywhere. Only a carburetor assembly (3000). I dismantled the carburetor, cleared everything with a special spray for the carburetor. Collected. the same picture covered a bunch of sites on the Internet. Most of the Carburetor of this type (VALBRO) on the paraplaner player carburetor. There, the guys are clearly versed with needle valves and springs (the filling of the carburetor camera depends on the rigidity of the spring with gasoline), the spring slightly stretched out, collected it “Oh miracle. “After a little adjustment, I worked out like a clock for half an hour. Two weeks later, to the country and Again the same picture of a carburetor overflow. Starts with a closed damper and then stalls. It turns out without a new locking needle of the carburetor and the springs (there are less than 50 spare parts for cars) my braid for grass. scrap metal. As a result, I ordered Zama RB-47 Carburetor Kit Zama RB-47 Carburetor Zama at Ebay.com “. Marasmus. Services do not sell, in the markets. no. On the Husqvarna support telephone, the dispatcher can only say information on the website on the site, t.e. They are politely sent to official services as a result I am waiting for a carburetor remote assembly from America, and the grass is not a kosen!

Husqvarna 128r stalls when you press the gas

When purchasing a lawn mower, it is necessary to prepare for the fact that, as well as in any other similar tools, there are also breakdowns that will require repair.

But you should not immediately run to the service center and pay large funds to the masters convincing you in the assortment of severe malfunctions in the device.

The lawn mower stalls at high speeds

Perhaps more and more a widespread complaint associated with gasoline trimmers sounds like this: “The lawn mower stalls”.

This is a prerequisite for this you will like more and a fairly harsh malfunction. But in most cases, the situation is even easier than it seems immediately.

In order to cope with such an inconsistent, first, try to deal with its causes without the help of others, because, having found out the reason, it’s even easier to fight with the inconsistency, and when it is even self.destroyed.

In fact, circumstances, this is when the lawn mower stalls at large speeds, there are many of these circumstances.

Additional, this is the presence of defects in the power system.

Under such circumstances, the lawn mower will stall

At idle. Dilems with the power system leads to a cesspool or incorrect adjustment of the carburetor.

Trimmer for grass The lawn mower stalls when adding gas / Benzonase Trimmer Stalls When The Throttle

adding a gas. trimmer for grass does not pull. Trimmer for grass loses its turnover with a load.

The lawn mower stalls or suffocates when you press the gas

trimmer for grass gasoline stihl stalls at

Vibrations that take place in the process of operation of the lawn mower can lead to a reservoir.

Incorrect adjustment of the lawn mower can be fixed by simply adjusting it in accordance with the requirements specified in the operating instructions.

In addition, sometimes gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank cover just clogged or stick.

To find out, try using a braid by loosening the gas tank cover.

If in this mode the device works properly, clean the valve.

over, the lawn mower can stall

Due to the poor fuel intake in the carburetor

Why then the device starts up, ask you?

The reason for this is that at first the fuel gradually falls into the carburetor and is enough for work with increased power.

However, then it is produced and at large speeds the engine begins to stall.

As for the carburetor, here the problem may also be that its body is too pulled.

The reason that the lawn mower stalls at high gas speeds may also be an air leak.

We are talking about the possible presence of a place through which air can pass during the heating process of the engine.

Among other things, do not forget to check the fuel intake hose. The problem may be that it is weak or cracked at all.

Husqvarna 128r grass carburetor adjustment of a trimmer carburetor

Independent adjustment of the carburetor of the lawn mower with your own hands is impossible without preliminary work, cognition of theory, awareness of the device of the fuel system. Annotation for carburetor repair.

lawn mowers, like the entire bench tool for the garden, is not difficult to maintain equipment. Repair, configure without the help of others you can and necessary. For example, adjusting the carburetor of the lawn mower with your own hands. it is 5 minutes.

Husqvarna 128 Trimmer is not gaining momentum

This all.produced obstacle has a number of different circumstances. At one time of working with the device, there is an option to meet both obvious problems, the signs of which are correctly tracked, and with asymptomatic options. The 1st option is more simple from the point of searching for the task. If the trimmer for grass does not develop, and there are no exact signs of breakdowns, then you will need to alternately check more common cases of problems, and if the prerequisite is detected, remove it.

Non.disclosure when the lawn mower does not develop, occurs, acceptable, in gasoline engines. This is tormented by the technique of different models, for example, Husqvarna, Champion, Stihl.

With high.quality products, such problems are more frequent than with cheap ones from unknown manufacturers.

Part of the structural parts with which the obstacles will be associated with are available to visual examination, to verify the functioning of other components it will be useful to disassemble the motorcycle.

The trimmer for the grass does not develop momentum if refined with low.quality fuel. Therefore, the engine may not start at all as they call it to work “jerks”, changing the speed of rotation of the knife or fishing line.

To find the quality of gasoline used without the help of others, subsequent deeds are made.

• The candles are removed with a special key.
• Inspect their working contacts for the presence of a rabid brick color plaque: if it meets, then the fuel used contains significant inclusion of additives.

Candles in general often act as indicators that allow you to find problems with the combustion chamber of the internal combustion engine, since of course they are swiftly removed and look around.

If plaque is detected, you need to drain fuel in a tank and replace it with a high.quality. The gas mower used should be refuel only with those brands of gasoline, which are indicated by manufacturers in the operating annotation. Also, the candles should be cleaned from plaque before installing to the district.

Repair Motokos Husqvarna 128r Loss of power

The subsequent all.fought prerequisite for lowering the number of revolutions on the trimmer is the pollution of its air in another fuel filters. At the beginning, the inconsistent is that the fuel-air mixture entering the combustion chamber is not saturated with oxygen, and therefore not all the gasoline burns. This does not allow Motokos to develop the highest power.

Town as a goal of checking, although it will be an air filter, you must remove it (for previously promoting the cover for this purpose) and turn on the lawn mower. If it works fine, then the knocked.down filter element is knocked down you need to stick a new.

If the situation remains unchanged after the actions done, then it is necessary to note the fuel filter. The essence of difficulty is similar to a previous case, only a bidding of oxygen does not receive enough gasoline for the usual operation of the device. The elimination of this difficulty is also carried out by the usual change in the filter element. Air and fuel filters are cheap. It is not difficult to change them without the help of others, and all the work does not take extra time.

It should be noted that without a fuel filter, it is forbidden to operate a trimmer for grass by annotation, and a piston knot is useful to repair a piston node through a kutser.

With the invariable operation of the lawn mower, the spark plug is polluted and wear out. To check this, they are removed and inspected for the presence of a carbon. Of course, remove the problem with 2 methods: with the ability, return an old candle, or simply install the latest in its place.

• turn and wiped a candle from a fuel;
• dry it without calcination;
• Using the file of a different sandpaper in another way, they remove from a candle of soot and inspect the gap between the electrodes (occurs 1 mm);
• collect a trimmer for grass;
• Book a lawn mower.

If the candle does not give out a spark after restoration manipulations at a suitable distance between the electrodes, then you will need to check the quality of the units of the parts of the electronic circuit of the device. Когда с проводами полный порядок, то пригодится совершенно точно устанавливать новейшую деталь.

Changing candles is a light process that is inexpensive, if you can return old ones, then in general free of charge. Only the candle key and the superstil will come in handy for the work.

If there is a constant red pollution and wear of the candles, then it is necessary to find the case of these abnormal phenomena deeper.

If our client remains in order with fuel, filters and a candle of ignition, then the subsequent source will like an internal combustion engine. He will have subsequent mechanical breakdowns:

There is a small cable in the carburetor department. He can save and lead to the dilemma under consideration. Therefore, while engaged in a carburetor, you should mainly check the condition of the cable, and if it is necessary to tighten (however, not up to the maximum). The main thing is not to overdo it with a stretch so that he does not crack under load.

After it is necessary to check the operational options of the carburetor, which must be consistent with the characteristics given in the annotation. If they are installed correctly, but there is no suitable effect, then you should disassemble the part, wash, clean, blow the pump what remains to make our client and collect it back. The carburetor itself is without mechanical damage.

If it is impossible to independently restore the performance of the carburetor, it is better to replace it with the latest detail or resort to expert services.

If the passage, when the adjustment or change of the carburetor does not give the desired result, you need to clean the drive mechanism and grease the cable with oil.

The problems associated with the engine can be removed at home with the required abilities, but it is better to use the services of the service center for this purpose. Its specialists will conduct an all.encompassing diagnosis of a trimmer for grass and establish an exact cause of the speed of revolutions.

Violation of conventional circulation of fuel on the trimmer also leads to the fact that the lawn mower does not gain working turnover. You will like this more caused by such basic reasons:

Main reasons

The following reasons are possible why the lawn mower or trimmer for grass stalls when trying to re.start and continue the interrupted work:

• malfunctions in the engine;
• refusal to supply gasoline and oil;
• damage to pipelines (capillaries, hoses, pipes);
• malfunctions in the ignition system.

General description of problems with a scythe or trimmer is not enough here. Clear and immediate repair, high.quality maintenance is impossible without specifying the identified cause.

With gazeaming

You click on gas. and the trimmer for the grass stops working, does not develop momentum. The following alleged reasons are possible:

• The tuning of the carburetor was lost, which appears with an increasing load on the drive itself. after its long downtime or when working in extreme conditions;
• The fuel valve is clogged with deposits;
• The carburetor cable is weakened and sag;
• Excessively stretched, possibly torn off the fuel supply hose;
• The check valve (sapun) clogged with deposits. fuel does not enter the tank with fuel.

Important! Problems in the carburetor itself give themselves out the vibration of the lawn mower.

With an increase in speed

If the lawn mower (or a trimmer for grass) has stalled when the engine speed is added, check the device according to the following signs:

• clogging or sticking a valve built into the gas tank cover;
• valve adjustment violation;
• A failure in the work of pistons and cylinders. from vibration during the work of a braid for grass or a trimmer for grass, random blows directly in the session of the mowing of grass;
• violation of the supply of fuel mixture;
• excess air pumping into the motor;
• cracking of the fuel intake hose, weakening its compounds.

When the fuel.heating mixture is served with the right portions to the engine in a timely manner. it burns the amount that has managed to enter from the moment of the last gallpling, and he stalls again.

When working idle

Having launched a trimmer for grass or a motorcycle at idle, you find that the device is starting up. but it swallows, after working, say, 5-10 minutes. The reasons here may be as follows:

• clogging, violation of carburetor adjustment;
• Initially incorrect configuration of the valve mechanism of the carburetor;
• air filter clogging;
• reducing the speed of the gearbox (if any). the incorrect ratio of the fuel mixture;
• clogging the throttle;
• penetration of excess air into the fuel system;
• The fuel ends in the tank (and oil in the tank, if the engine is four.stroke).

If there are problems directly with the carburetor, the machine will stop both after a cold start and after launch on the already worked engine.

Immediately after the start

The stalling of motorcycles or a trimmer for the grass immediately after the start is due to the following reasons:

• impressive of previously adjusted valves;
• Initially incorrect setting of the valve mechanism;
• clogging with fuel supply valve;
• the hose is worn or poorly attached.

Due to the violated fuel injection algorithm, a lawn mower or a trimmer for grass is greatly vibrated in work.

In the process of warming the engine

If the engine heats up too fast, overheating. a lawn mower or a trimmer for grass works unevenly, as if jerking. After which she stalls. The reason may be as follows:

• boiling gasoline;
• The ignition wire was damaged (poor insulation);
• The coil in the ignition system has noticeably burned out, inter.seal circuits appeared.

The same heating is observed when using rotary (not disk) damper.

When opening an air damper

A lawn mower or a trimmer for grass stalls when raising the damper for the following reasons:

Ways to eliminate breakdowns

The following works are possible by carburetor:

• cleaning and adjustment of the fuel supply valve;
• similar work with a valve producing spent gases and pairs (after fuel burning);
• replacement of the spring weaker on the entrance valve;
• restoration of the tension of the carburetor cable;
• replacement of the fuel leaks hose, verification and strengthening of a weakened connection;
• changing the rotor damper disk;.
• Change of faulty wire or ignition coil.

The list of work on the work may also include the cleaning of the nozzles (in a 4-stroke engine), replacement of the valve washer, gaskets in tanks and so on.

The lawn mower stalls

When purchasing a lawn mower, you need to be prepared for the fact that, as in all other similar tools, it may also have breakdowns that will require repairs.

However, do not immediately run to the service center and pay a lot of money to the masters who convince you of a serious malfunction in the device.

The lawn mower stalls at high speeds

Perhaps the most common complaint related to gasoline trimmers sounds like this: “The lawn mower stalls”.

Of course, the reason for this may be a rather serious malfunction. However, most often the situation is much simpler than it seems at first glance.

To cope with such a problem, first of all, try to deal with its causes on your own, because, having found out the reason, it is much easier to fight the problem, and sometimes it is even self.destructive.

In fact, the reasons are when the lawn mower stalls at high speeds, there are quite a lot of these reasons.

Another, this is the presence of malfunctions in the power system.

In this case, the lawn mower will stall at idle. The problems with the power system may lead to a drainage or incorrect carburetor adjustment.

Vibrations that take place in the process of operation of the lawn mower can lead to a reservoir.

Incorrect adjustment of the lawn mower can be fixed by simply adjusting it in accordance with the requirements specified in the operating instructions.

In addition, sometimes gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank cover just clogged or stick.

To find out, try using a braid by loosening the gas tank cover.

If in this mode the device works properly, clean the valve.

over, the lawn mower can stall due to poor fuel flow into the carburetor

Why then the device starts up, ask you?

The reason for this is that at first the fuel gradually falls into the carburetor and is enough for work with increased power.

However, then it is produced and at large speeds the engine begins to stall.

As for the carburetor, here the problem may also be that its body is too pulled.

The reason that the lawn mower stalls at high gas speeds may also be an air leak.

We are talking about the possible presence of a place through which air can pass during the heating process of the engine.

Among other things, do not forget to check the fuel intake hose. The problem may be that it is weak or cracked at all.

These are the main reasons why the gas mowl can stall.

The lawn mower stalls

When purchasing a lawn mower, you must be prepared for the fact that, as in all other similar tools, breakdowns may also appear in it that will require repairs.

But do not immediately run to the service center and pay big funds to the craftsmen who convince you of the presence of severe malfunctions in the device.

The lawn mower stalls at high speeds

Perhaps more and more a widespread complaint associated with gasoline trimmers sounds like this: “The lawn mower stalls”.

Naturally, a rather harsh fault may be a prerequisite for this. But in most cases, the situation is even easier than it seems to be the 1st gaze.

In order to cope with such an inconsistent, first, try to deal with its causes without the help of others, because, having found out the reason, it’s even easier to fight with the inconsistency, and from time to time it is even self.destructive.

In fact, circumstances, this is when lawn mower stalls at high speeds, there are a lot of these circumstances.

Trimmer for grass does not gain momentum, what to do?

1st launch of the latest lawn mower.Removed the grid from the silencer, began to work.

Another, this is the presence of malfunctions in the power system.

In this case, the lawn mower will stall at idle. The problems with the power system may lead to a drainage or incorrect carburetor adjustment.

Vibrations that take place in the process of operation of the lawn mower can lead to a reservoir.

Incorrect adjustment of the lawn mower can be fixed by simply adjusting it in accordance with the requirements specified in the operating instructions.

In addition, sometimes gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank cover just clogged or stick.

To find out, try using a braid by loosening the gas tank cover.

If in this mode the device works properly, clean the valve.

over, the lawn mower can stall due to poor fuel flow into the carburetor

Why then the device starts up, ask you?

The reason for this is that at first the fuel gradually falls into the carburetor and is enough for work with increased power.

However, then it is produced and at large speeds the engine begins to stall.

As for the carburetor, here the problem may also be that its body is too pulled.

The reason that the lawn mower stalls at high gas speeds may also be an air leak.

We are talking about the possible presence of a place through which air can pass during the heating process of the engine.

Among other things, do not forget to check the fuel intake hose. The problem may be that it is weak or cracked at all.

These are the main reasons why the gas mowl can stall.

In recent years, a gasoline trimmer for the grass has made the status of one book from the main tools in the arsenal of summer residents. And such an environment is logical, because a motorized braid for grass allows you to quickly put a personal plot in order. But with the form.

The trimmer for grass stalls. how to eliminate the problem

A gasoline trimmer for grass is a useful tool for cleaning from unnecessary grass of house territories and large area lawns. The design of this technique is quite complicated, therefore, if the device breaks, there may be several reasons. The most likely factors that have caught a breakdown are usually described in the user guide. Knowing why a trimmer for grass stalls, you can try to independently eliminate the defect. The most common malfunctions provoking the motorcycle stops, and the ability to repair them with your own hands is in the material further.

In order to most accurately determine the cause of the trimmer malfunction for grass of any brand (for example, echo) and find out the possibility of eliminating it, you need to install, when performing what action the device stalls. The engine can turn off both at idle and at high speeds, heated under load or immediately after starting and t.D.

If you stalled after gas supply

Owners of gasoline braids often mention that the lawn mower stalls when you press the gas. Usually such a breakdown occurs due to problems in the carburetor. A failure in his work can occur due to long-term storage, use in difficult conditions, significant overload of the motor. The symptom of such a breakdown will be vibrating movements of the device during operation.

On a note! Users familiar with the repair of a car carburetor can try to restore this important node of the trimmer for the grass on their own, using the instructions for operating. Otherwise, the correct decision will be to seek help from the service center representatives.

Sometimes a trimmer for grass stalls when you give gas because the fuel valve is clogged. This interferes with the supply of gasoline. To eliminate the problem, it is enough to loosen the valve. Thus, normal supply of carburetor fuel will be restored.

Another possible reason why the lawn mower stalls when gas is supplied is pollution of the soundtress (check valve). This detail prevents the appearance of a vacuum in a gas tank. If it is clogged, the air does not flow, which means that fuel does not go to the carburetor. To eliminate the problem, it is necessary to clean this element.

If it stalled at high speeds

If the carburetor stalls at high speeds, this means that in idle and small there are enough incoming fuel, and to work on high is not enough. Then it is necessary to check the serviceability of the following nodes of the trimmer for the grass.

• Fuel hose. its integrity could be violated as a result of cracking. In this case, you need to replace the part. Or maybe you just need to tighten the clamps.
• A filter network between a carburetor and a hose for supplying a gasoline mixture-it could clog. In this situation, it is necessary to clean the detail.
• The valve on the gas tank cover. he could stick or clog with garbage. Cleaning is also necessary.
• Carburetor. perhaps as a result of constant vibration, it was resolved. This is usually characteristic of cheap Chinese details. To eliminate the problem, it is necessary to set up according to the instructions. In some cases, it is enough to only weaken the tightening of the carburetor case. If the adjustment is not possible, it is necessary to install a new element.
• Additionally, check the air filter. Perhaps it will need to be washed and cleaned or replaced with a new one, as he could clog with dirt and particles of grass when tilted technology, when the user mowed in hard.to.reach places.

If you stalled during work idle

If the lawn mower stalls, working idle, there may be several factors reasons.

• First you need to check the prepared fuel solution, when it comes to a four-stroke trimmer working on a gasoline-oil mixture. There is a chance that it is made incorrectly. the proportions are not withstanded. Because of this, the gearbox is warming up, and the revolutions on the drum are lowering.
• Another probable cause is blockage of elements such as a throttle, air filter or carburetor. You need to clean the indicated details.
• Another possible factor is to resolve or incorrectly carried out carburetor adjustment. You need to adjust the setting according to the instructions.
• Observe this problem mono and when opening the air damper. In this situation, the lack of fuel for a trimmer for grass occurs through the fault of the air flow.

If the device does not have enough fuel, it works properly at high speeds or when they increase, but stalls at idle. If the root of the problem consists in the carburetor, the lawn mower will be disconnected both with cold startup and hot.

If you stalled after starting

If the technique starts and stalls immediately after starting, this indicates the wrong settings or deducting the device. As a result of this, the fuel enters the engine unevenly, which leads to significant vibration and disconnecting the trimmer for the grass. To fix the breakdown, it is necessary to reconfigure the device according to the user management.

Another probable problem is the blockage of the valve supplying the gasoline mixture. It must be cleaned.

On a note! If the trimmer for the grass starts, but immediately stalls, it may also mean that the fuel is moving to the carburetor with difficulty. Weakening the valve will help to eliminate the problem. this will provide uniform and free circulation of fuel in the device.

Another possible reason is the damaged fuel intake hose. Air can penetrate through cracks and holes into the system. To solve the problem, you need to increase the engine speed in order to get rid of air bubbles that have penetrated the device.

If you stalled when opening the damper

If the technique works properly at idle, but stalls when opening an air damper, this reports about the penetration of air into the system through cracks in the fuel supply hose or damaged oil seals. To fix the breakdown and establish the work of the tool without driving air from the atmosphere, it is necessary to replace damaged parts.

Preventive measures and operating rules

So that the lawn mower does not work and does not stall when starting, it must be correctly stored and operated. Compliance with the following simple recommendations will forget about problems.

• When begging the grass, you need to monitor the state of the cooling system. It is also necessary to regularly clean the channels in the case and starter’s ribs.
• To clean the tool, you should use kerosene, solvent, or other washing tools.
• You can not clean a hot tool. it must cool before washing.
• It is important to observe the recommended working mode. this will avoid overheating of the engine.
• If a braid for grass is not used over the next thirty days, the fuel must be drained, otherwise it will fall into heavy components that can score the channels of the carburetor.
• After the fuel is merged, the trimmer for the grass should work at idle for some time until it turns off. This will allow you to completely get rid of the rest inside the working mixture.

To store the tool in cold weather, you need:

• completely drain the fuel;
• disassemble the lawn mower, wash and clean all available components;

• inspect the condition of the parts, eliminate all defects that can be corrected;
• pour the required amount of oil into the gearbox;
• Clean the air filter;
• perform partial disassembly of the engine, wash all moving parts, blow and lubricate thoroughly;
• To lubricate the piston, unscrew the candle, then raise the piston to the upper dead point by the starter, pour a small amount of oil into the hole for the candle and do the crankshaft several times.

Important! If there is no way to store a trimmer for grass in a warm dry room, you must first wrap the motor with an embarrassed rag.

Only by observing these rules, you can be sure that the lawn mower will work properly and will not stall for a number of seasons.

As you can see, stopping the work of a trimmer for grass can be caused by many reasons. Most of them can be fixed independently using the user instructions. In cases where there is no self.confidence, the equipment is recommended to be attributed to repairs. It is worth remembering that incorrect actions can cause even greater harm to the trimmer. As a result, the repair of Motokos will cost a much larger amount than it would be initially, and in the worst case, it may be necessary to buy a new unit.

Why the chainsaw is not started

If defects occur, it is necessary to check the serviceability of the components.

If a new chainsaw is not started, you should check the presence and supply of fuel, the occurrence of a spark on the spark plug, the functioning of the exhaust valve, the condition of the filters. The work of a saloon stalling device built into the fuel cover of a stalling device.

The reason that the Chinese chainsaw is not started can be poor.quality equipment. It is possible to have various malfunctions, incorrect assembly. Some goods come to defective. If the inspection has not revealed malfunctions that can be eliminated independently, you can replace the saw on the warranty coupon.

On the cold

The reason why the device does not start on the cold is often a violation of the sequence of engine start.up.

You should familiarize yourself with the instructions: manufacturers indicate how to properly launch a chainsaw.

To enrich fuel, you should first close the air damper. After that, fuel suction is produced. For this, a special primer is used. Then turn on the ignition. Until the first outbreak of engine, several starter movements need to be made. The damper opens, the device is launched. If the sequence is violated, any step is missed, incorrect work is possible.

If the chainsaw has stopped starting, the probable reason is the problem with the fuel system. Non-varnishes with launch can occur due to an incorrectly adjusted carburetor, clogging of the highway and the fuel filter. The quality of fuel is also important. If the fuel is diluted with water, the device is poorly started or does not work at all. The mixture should be fresh.

Read also: Soldering aluminum air conditioning tubes

A possible cause of problem launch is engine malfunction. Wear or breakdown of the part leads to undesirable consequences: reducing compression in cylinders and other troubles. It is recommended to contact specialists with such problems, since it is difficult to diagnose and fix the breakdown independently.

Hot

If the chainsaw is poorly started to be hot, you should start an inspection of the tool from the spark plug. It will also be required to check the spark on the candle.

So that the device works properly must be a dry candle. When it is wet, there are no sparks on the contacts. You can try to replace the part with a new.

If there is a spark and the candle is in good condition, try to look for a problem in the fuel system. If, upon visual inspection, it was not possible to detect the cause of the breakdown, the carburetor should be removed. If the amount of fuel exceeds the permissible, the device will not work. The candle should be wet. Should turn the candle hole down down. If the fuel mixture is pouring, the reason why the chainsaw is not started on hot, there will be an excess of fuel.

Husqvarna 128R carburetor adjustment with your own hands

You can adjust the carburetor of the lawn mower with your own hands

lawn mowers, like the entire bench tool for the garden, is not difficult to maintain equipment. Repair, configure without the help of others you can and necessary. For example, adjusting the carburetor of the lawn mower with your own hands. it is 5 minutes.

The carburetor from the lawn mower is a node in the power supply system. In it, like all carburetors, there is a process of mixing air and fuel (gasoline) for the upcoming supply to the motor cylinders.

In this process, the main thing is the correct proportion of fuel and air, why the carburetor is regulated.

The main problems and malfunctions of the carburetor.

Mesh filter. become adjusting the carburetor, Husqvarna chainsaws with your own hands. Independent adjustment of the carburetor of the lawn mower with your own hands is impossible without preparatory work, knowledge of theory, understanding of the device of the fuel system. DIY APARTICAL Carburetor adjustment with your own hands There are only two tasks with this element more often:

In order to find out the cause of the breakdown, the fuel filter lid is unscrewed to extract the mesh filter. Husqvarna carburetor adjustment on our Husqvarna 128r lawn mower. If the mud just accumulated on it, then flushing in gasoline or purge will help.

With visible damage on the mesh filter, it is necessary to put a new. There may also be damage to the fuel supply pipe (during the repair they practice checking this element).

The starting device of the carburetor almost always does not work due to blockages. Husqvarna carburetor adjustment. In the correct operation of the Husqvarna 137 chainsaw, high.quality tuning of the carburetor is important, tension. Husqvarna 55, its technical characteristics, purpose and features. Carburetor adjustment for, for example, Husqvarna (Husqvarna) and Partner (Partner). DIY carburetor adjustment. Should be used for flushing acetone or the same gasoline.

Purging parts of a carburetor with click of compressed air. permissible and comfortable repair practice.

Trimmer for grass The lawn mower stalls when adding gas / Benzonase Trimmer Stalls When The Throttle

trimmer for grass The lawn mower stalls when gas added. trimmer for grass does not pull. Trimmer for grass loses momentum at load.

trimmer for grass gasoline stihl stalls with full gas cause of the disease !

Vibrations that take place in the process of operation of the lawn mower can lead to a reservoir.

Incorrect adjustment of the lawn mower can be fixed by simply adjusting it in accordance with the requirements specified in the operating instructions.

In addition, sometimes gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank cover just clogged or stick.

To find out, try using a braid by loosening the gas tank cover.

If in this mode the device works properly, clean the valve.

over, the lawn mower can stall due to poor fuel flow into the carburetor

Why then the device starts up, ask you?

The reason for this is that at first the fuel gradually falls into the carburetor and is enough for work with increased power.

However, then it is produced and at large speeds the engine begins to stall.

As for the carburetor, here the problem may also be that its body is too pulled.

The reason that the lawn mower stalls at high gas speeds may also be an air leak.

We are talking about the possible presence of a place through which air can pass during the heating process of the engine.

Among other things, do not forget to check the fuel intake hose. The problem may be that it is weak or cracked at all.

Problem with Slopry Husqvarna 128r

I suspect, the exhaust of the muffler is clogged with soot. The symptoms are similar.

Maybe there is a mesh that you need to throw out.

Take the net | Throw it, if it does not change, it means a lack of gasoline, adjust the carburetor, primarily a jickler l, towards enrichment. Yes, and first see the condition of the fuel filter.

grinding grid, changed the candle with a really working

Srema73. Write down the video of the engine with a smooth and sharp adding “gas”.

Lack of gasoline: option |. Polluted fuel | th filter, carburetor requires adjustment or air leaks due to the worn crankshaft oil seals. But the third option only if the braid for the grass is old and has worked out a lot.

A little out of that opera. A friend of MK Tarpan did not start. There the centrifugal clutch did not work, the engine did not gain the speed. The reason was banal, the air filter was town. They took him off for a minute, started up and ran. Washed, dried, drank beer and went to work. So watched the air filter.

LAV1955 wrote: A little of the wrong opera. A friend of MK Tarpan did not start. There the centrifugal clutch did not work, the engine did not gain the speed. The reason was banal, the air filter was town. They took him off for a minute, started up and ran. Washed, dried, drank beer and went to work. So watched the air filter.

It is on the right now. I did not mention the air filter since the symptom | A little of the wrong ones. And I don’t think that a person completely does not check about him. And I know what to advise, repaired hundreds of chainsaws and about one and a half dozen motorized equipment | X manufacturers. And then everyone is a personal matter to listen to my words or ignore. I definitely won’t be worse.

The wrong opera belonged to my post, it is about MK.

The airfield was removed, the fuel also checked, clean, disassembled there completely 2 outers on the piston, not deep but wide, 2-3 mm, so I think, because of this is it because? And the virgin is normal, the braid for the grass worked for 3 years by faith and truth

Srema73 wrote: there are 2 bulbs on the piston, not deep but wide 2-3 mm, so I think, because of this, if?

Blows would show themselves to a greater extent at low speeds.

good health, dear specialists.Please tell me how the ignition switch, located in the right handle, operates on the Husqvarna 128: to break the circuit or to close to the “mass”.the pen is reluctant to disassemble once again.

Yakut274 wrote: good health, dear specialists.Please tell me how the ignition switch, located in the right handle, operates on the Husqvarna 128: to break the circuit or to close to the “mass”.the pen is reluctant to disassemble once again.

TOP-3 trimmers forester their characteristics and methods of eliminating faults: convey the essence

In order to draw a picture of a trimmer malfunction for gasoline grass, you must have an idea of ​​the constructive structure and methodology of the device. The heart and the basis of the braid for grass are the engine that rotates the shaft transmitting rotation to the cutting part. Starting from the basics, check everything in order, using the necessary tool.

Lesser Lesnik 334

powerful, in comparison with the previous model. Recommended for use in small and medium sections up to 1 thousand. m. sq. During operation, a forester 334 gains speed up to 9 thousand. rpm. Due to the possibility of quick disassembly of a trimmer rod for grass, it is easy to transport and store in rooms with limited space.

Among the additional functions: the presence of vibration isolation, the ability to lubricate the gearbox, a simplified system for replacing air filters.

Lesnik Lesnik 335

Today, this model is very rare due to the fact that it was discontinued from production. A significant difference from the previous model is the type of handle. Buyers do not distinguish significant internal differences. It is currently almost impossible to purchase a new lawn manner of a forester 335.

Summing up

When the first signs of incorrect operation of the chainsaw appear, it is worth performing its full diagnosis. In order to avoid damage to the saw as a result of improper maintenance, it is better to entrust the work to determine and eliminate engine malfunctions. And most importantly, you do not need to use a chainsaw with minor defects, t. to. This will lead to even greater problems.

The chainsaw does not stall the reason

The owners of the chainsaws have to come across the purpose that the saw, without visible circumstances, ceases to work normally. I figure out why the chainsaws are stalling at different operating modes, and now to outline, the most diagnose a malfunction, we will try in our article.

IMPORTANT. An experienced electrician leaked a secret to the network how to pay for electricity half as much, a legal way

Husqvarna 240 1. Badly starts 2. When you press the gas stalls 3. Works with interruptions 4. Read more