Lawn mower wire cut. Do All Robot Lawn Mowers Need a Perimeter Wire

How to Fix a Lawn Mower Throttle Cable

Is your lawn mower dying down whenever you use the throttle or not starting at all? Your throttle cable may be responsible for this. The cable may be bad or broken, which means it needs special attention right away.

But before you start to panic, replacing or fixing a lawn mower’s throttle cable is not difficult at all. You can get it all done within a few steps, without any mechanical skill or experience. This article talks about exactly how to fix a lawn mower throttle cable in simple steps. Keep reading to find out.

• What Does the Lawn Mower Throttle Cable Do?
• My Lawn Mower’s Throttle Cable Does Not Work. What Could Be Wrong?
• Why Does a Lawn Mower Throttle Cable Break?
• How to Fix a Broken Z-Tip of a Lawn Mower Throttle Cable

• Step 1: Prepare your cable
• Step 2: Create the Z-bends
• Step 3: Cut off the z-bend end of the wire
• Step 4: Combine both throttle cables
• Step 5: Cut the cable
• Step 6: Replace the z-tip of the original cable

• Step 1: Remove the broken throttle cable
• Step 2: Install the new cable on the handle
• Step 3: Connect the new cable
• Step 4: Adjust the new cable
• Step 5: Try to drive the lawn mower

• #1: Full throttle puts less stress on the engine
• #2: It makes the engine use less amount of fuel
• #3: It will give your lawn a cleaner cut
• #4: Your mower keep cutting even in heavier grass

What Does the Lawn Mower Throttle Cable Do?

Although it is a very small component of the lawn mower, the throttle cable performs a very important role in the mower. It is what controls the speed of the engine, and determines how fast the blades move when you’re mowing your lawn. Learn more about how a lawn mower throttle cable works.

When the cable is bad or broken, it causes the mower to be less efficient, and in some cases, refuses to even start.

While some mowers have manual throttles, the most modern ones come with an automatic throttle. With such a mower, the throttle automatically adjusts itself based on the task at hand.

My Lawn Mower’s Throttle Cable Does Not Work. What Could Be Wrong?

There are a couple of reasons this is happening. You just need to carefully observe the cable to rightly diagnose why it has refused to work. The first place to start is to check if the cable is broken.

So pull it out of the outer tube and check through its entire length to see if it’s broken in any part.

If the cable is broken somewhere in the middle, then, you will just have to replace it. If it’s just the z-tip that’s broken, simply getting a new z-tip will fix the issue.

However, if the cable is not broken but still won’t work, then that’s not a big issue. It could just be that the cable is stuck somewhere – usually when dirt has entered the outer tube or the inner cable is already getting rusty.

In that case, get some WD-40 and spray it on the cable a couple of times. That should get your throttle cable to work perfectly again. But if it still won’t work, you may need to replace the cable.

Why Does a Lawn Mower Throttle Cable Break?

Although many factors could be responsible for the breakage of your throttle cable, the most popular is due to wear and tear.

As you use your lawn mower over time and the cable constantly comes under pressure, it begins to wear out or get stretched, resulting in breakage.

When the throttle cable is broken, you might start experiencing a delayed response from the throttle.

Sometimes, the lawn mower’s engine may refuse to start. Whenever you start noticing these signs, then it’s time you consider changing the throttle cable.

How to Fix a Broken Z-Tip of a Lawn Mower Throttle Cable

Before you begin fixing your broken z-tip, get all the tools you will need in one place. You will need a z-bending tool, some measuring tools, a new throttle cable, a needle nose plier, and wire cutters.

Once you have all of these, then you can go ahead with the steps below to get the job done.

Step 1: Prepare your cable

Get a 7-inch #16 wire size cable and bend it in half. Aluminum cable is always recommended for this because it is easier to turn and twist than any other type of cable.

Once you have the aluminum wire, use the pliers to flatten it, and press the two bent halves together.

Step 2: Create the Z-bends

Here, you will be creating two z-bends – one on each end of the wire. To do this, use a wire flattener or nose pliers to hold the bottom of the wire by two inches.

Now, get any device that can hold a #16 wire in an upright position so you can twist the free length of the wire a couple of times.

Twist the wire enough, while being careful not to break it. Bend the top of the wire at a 90-degree angle using the plier so it can create a z-bend on the wire.

Now, use a couple of needle-nose pliers to hold firm the first 90-degree bend while you try to make the second 90-degree angle on the other end.

To make this easier, you can check the z-bend of the original throttle cable and try to copy it instead of going through this step.

Step 3: Cut off the z-bend end of the wire

The next thing is to snip off the z-bends of the aluminum wire.

Step 4: Combine both throttle cables

Combine the z-bend of the aluminum wire you just created and combine it with the old throttle cable.

Put the z-bend just below the original wire on a table in such a way that both of their z-tips are parallel. Now use a marker to mark the part you need to cut.

Step 5: Cut the cable

Now that you have made the mark, cut the original cable just at the point you mark.

For the z-bend of the aluminum wire, cut off another extra 1-2 centimeters from the marked point.

Step 6: Replace the z-tip of the original cable

Use a wire union device to carefully merge the original throttle cable and the z-bend aluminum wire.

You can also use a hammer if you don’t have a union device. Now, you have just successfully fixed the broken z-tip of your lawn mower throttle cable.

How to Replace a Broken Lawn Mower Throttle Cable

If you notice the throttle cable is broken, the best solution is to get a new throttle cable to replace the damaged one.

You can easily get this online or at a nearby hardware store. Once you have gotten a new cable, follow the steps below to fix it on your lawn mower.

Step 1: Remove the broken throttle cable

Turn off your lawn mower and use a pair of needle-nose pliers to gently remove the cable casing at the base of the mower.

If you don’t have a plier, you can use your bare hands to twist off the screws too.

Lose the throttle cable from the throttle arm by opening the unit and gently removing the screws on the handle. The throttle cable would be free once you unscrew the handle. Then, you can pull it out.

Step 2: Install the new cable on the handle

Check the back of the engine for the wire base. Now, insert the new cable through the base and the throttle arm.

Use a bolt to fasten the new cable. But if there are no holes there to hold the bolt, you may need to drill new holes.

Step 3: Connect the new cable

Measure out the length of the throttle cable you think will fit and give it a little extra inch for allowance. The purpose of the extra allowance is to make the cable loose enough to allow the handles to be folded all the way down.

Now, slip the new cable through the casing and fasten it to the throttle handle. Make sure it is tight enough for you to have the throttle all the way down.

Tighten the lock screw and reinstall the casing.

Step 4: Adjust the new cable

Now that the new cable has been installed, you need to check if the tension on the throttle is not too much.

So, turn on the mower and observe its behavior. If it is running too high even while at a spot, it means the tension on the cable is too much, and you will need to loosen it.

Loosen the lock screw a little and slide a bit more cable through the slot. Then, tighten the screw again.

Step 5: Try to drive the lawn mower

Check if your new throttle cable is working fine by doing a test drive. Try to drive your lawn mower to see if the engine is now responding well to the throttle.

Why Do I Need to Operate the Throttle At Full Speed?

One major sign that your throttle cable is bad is that the engine will not be able to operate at full throttle. The engine begins to die down whenever you try to go on full throttle.

While some users may prefer to operate the mower at partial throttle, there are lots of benefits associated with going at full speed.

Let’s take a look at some of these benefits:

#1: Full throttle puts less stress on the engine

The engine of your lawn mower is designed to operate at full throttle. Going anywhere less can stress the engine parts and reduce its efficiency over time.

It can shorten the life of the battery because certain engines won’t begin to charge the battery until they reach a particular RPM level, which may require that you go on full throttle.

#2: It makes the engine use less amount of fuel

Contrary to popular belief, full throttle makes the engine use less fuel than when it’s run on partial throttle. At full throttle, the engine runs at its best, hence reducing the amount of oil used for its operation. This is usually the other way round when it’s running on partial throttle.

#3: It will give your lawn a cleaner cut

The blades of your mower move at the best speed at full throttle because the engine is also running at its best during the time.

Important to note that faster blades mean a better cut, hence giving your lawn a perfect finish.

#4: Your mower keep cutting even in heavier grass

There is no better way to bring down those heavy grasses around your lawn than to run your lawn mower at full throttle.

It will make the job easier for you and the mower. But when it’s run on partial throttle, the heavy grass clogs up in your mower, which may require you to do the cutting manually.

Final Note

A broken throttle cable is inevitable and every lawn mower owner should expect it. However, when it eventually happens, it is nothing to panic about.

Fixing a throttle cable is not difficult – in a couple of steps, you will be done with the whole procedure.

We have given detailed steps on how to fix your throttle cable in this post. If you are, however, confused about the location of any of the parts mentioned, you should always consult the user manual.

Sam has over a decade experience in landscape and yard maintenance. He enjoys testing and reviewing different yard tools.

Do All Robot Lawn Mowers Need a Perimeter Wire?

Robotic lawn mowers have upended the traditional way of cutting the grass.

Automated mowers seek to eliminate manual labor — and unreliable contractors. The first generation of robotic lawn mowers relied on boundary wires to guide them around your yard, protect landscape features like gardens, and avoid trees and other obstacles.

But do all robot mowers need a perimeter wire? Boundary wires get in the way and create multiple inconveniences — partially defeating the purpose of robotic mowers in the first place.

Learn more about perimeter wires and robotic lawnmowers below and discover the latest generation of AI and LiDAR-powered devices that operate more effectively without requiring perimeter wires.

With a better understanding of the latest innovations, you can buy the right robotic mower to cut the well-manicured lawn of your dreams.

Why Do Most Robotic Mowers Rely on a Boundary Wire?

A robotic lawn mower needs to know where it is and where not to go while trimming your lawn. The first generation of robotic lawn mowers would veer off into course without a perimeter wire — or end up mulching your prized Begonias.

Most robot mowers still use physical boundary wires to operate. The wires act as an invisible fence around the perimeter of your yard. A perimeter wire emits an electromagnetic signal that helps steer the robot mower, guiding it away from flower beds, patios, driveways, and other areas where you don’t want it to roam.

If your landscaping requirements change, boundary wires are movable. But it can be a pain to lay and re-lay them. The whole point of a robotic lawn mower is to eliminate work, not create more of it.

Perimeter wires are also susceptible to damage by animals or lawn/gardening tools, which can unintentionally set your robot lawn mower free.

Do All Robot Mowers Need Boundary Wires?

Not all robot mowers require perimeter wires. Cutting edge models use new technology like AI and LiDAR to navigate your landscape effortlessly without the hassle of setting up physical boundaries.

Above ground perimeter wires can be dangerous, presenting a trip hazard for adults and a considerable risk to children who may not see the barrier.

Perimeter wires also deteriorate or break over time as a result of harsh weather conditions. Even limited stretching can damage wires, and corrosion happens no matter where you live.

Perimeter wires also place limitations on installing other systems, like irrigation, aeration, cable or internet connection, or outdoor lighting.

If you accidentally damage a wire when installing any of these systems, the robotic lawn mower won’t be able to do its job effectively until it’s repaired or replaced. You may not even know the damage has occurred until it’s too late.

There are multiple reasons why a robotic lawn mower that doesn’t rely on perimeter wires is more convenient and efficient.

Luckily, new innovations have put wire-free robotic lawn mowers, like EcoFlow’s award-winning BLADE, well within reach.

Benefits of Using Robotic Lawnmowers Without Boundary Wires

Robotic mowers that don’t require boundary wires offer several advantages, from less room for error to less time and effort needed. What’s not to love?

Less Room for Human Error

With GPS, sensors, beacon technology, and vision-based systems, the human error that can result from boundary wire placement is eliminated. Advanced robot mowers like the BLADE will use proprietary technology to stay within the boundaries you define.

No Need to Repair or Replace Boundary Wires

Robot mowers that require boundary wires often leave the wires exposed to the elements, where they can easily be damaged. With a wireless robotic mower, these worries are gone. No boundary wires to install means there are also none to replace.

Less Time and Effort Required

Using wireless technology saves time and effort in laying down any wire around your yard. It prevents unnecessary use of the robot mower.

Since the goal of a robot lawn mower is to handle the work for you, one that doesn’t require preliminary work stays true to that claim.

Removes Safety Hazards and Accessibility Issues

Boundary wires may prevent tripping hazards if not installed correctly. It can be a serious issue in high-traffic areas or yards where children or animals play.

Setting the perimeters requires several steps, and the labor involved also can be intensive. For people with disabilities or limited mobility, the additional step creates accessibility issues where there doesn’t need to be any.

Frequently Asked Questions

Are There Robot Lawn Mowers That Don’t Use Perimeter Wires?

Yes, robotic lawn mowers like the BLADE Robot Lawn Mower from EcoFlow don’t require perimeter wires. Instead, these mowers use GPS, sensors, beacons, or vision systems to detect the designated boundaries and avoid mowing them.

Final Thoughts

Robot lawnmowers can make lawn maintenance more manageable and efficient than ever. By leveraging technology like GPS, sensors, beacon systems, and vision-based systems, wireless robotic mowers can simplify your work even more by removing the need to install boundary wires.If you’re looking for a more intelligent and easier way to maintain your lawn, consider investing in a robot mower that doesn’t require any boundary wires. EcoFlow’s BLADE operates using a virtual boundary and high-precision GPS for a Smart, wireless solution to lawn care.

EcoFlow is a portable power and renewable energy solutions company. Since its founding in 2017, EcoFlow has provided peace-of-mind power to customers in over 85 markets through its DELTA and RIVER product lines of portable power stations and eco-friendly accessories.

How to Repair a Lawn Mower Pull Cord

Our editors and experts handpick every product we feature. We may earn a commission from your purchases.

valentinrussanov/Getty Images

Introduction

Replace a broken starter rope on your lawn mower quickly and easily by following this simple step-by-step procedure.

Materials Required

You tug one last time to get the lawn mower started, and suddenly the pull cord breaks and the end goes spinning into the hole. Don’t blow a gasket. If you have even a tinge of mechanical aptitude, replacing a starter rope is pretty easy. If the spring breaks—a rare event, according to our repair expert—the fix is a lot harder, and we recommend you take the mower to a repair center.

Stuck Cord or Broken Cord?

First, check to confirm that the cord is actually broken and not just stuck. If it’s stuck, it may be an easier fix than full pull cord replacement and you likely won’t have to buy any new parts. Here are a few tips for fixing an electrical cord.

Run through your troubleshooting checklist if your cord isn’t working. Check to ensure the brake is off, make sure there isn’t any lawn debris clogging the blade, and finally, if all else fails, use our steps below to open the rewind unit. There, you’ll be able to see if the cord is stuck or fully broken.

What to Know About Replacement Cords

Different lawn mowers need different types of pull cords. If you don’t have time to spend looking for the right match, you can opt to get the thinnest kind, which will fit no matter what. But the thinner the cord, the more likely it is to break again soon. If you don’t already have replacement cord on hand, go to your local hardware store with the broken cord. The associates there should be able to help you get the exact kind you need.

LUBA AWD 1000: Perimeter Wire Free Robot Lawn Mower

Using the RTK-GNSS and Multi-sensor integrated Navigation System, LUBA AWD can map out your lawn and set up various mowing zones without you having to dig or bury wires. LUBA AWD makes the lawn maintenance a breeze for you.

RTK-GNSS and Multi-Sensor Navigation System

With the advanced four Global Navigation Satellite System (GNSS) and RTK Technology and IMU sensors, LUBA can map and navigate in cm-level accuracy.

Powerful RTK Signal Coverage

LUBA RTK signal range can cover a radius of 120m, so LUBA can take care of even large and challenging lawns. The LUBA AWD series maintain perfect route stability even when satellite signals are poor thanks to the integration of interial navigation, odometry, and patented algorithms.

Powerful All-wheel Drive System

Featuring four powerful in-hub motors and exclusive off-road tires and suspensions, LUBA AWD Series boasts best-in-class traction and zero-turning agility. Unlike small-diameter wheel mowers, the LUBA can effortlessly handle 65% slope and traverse the most demanding terrain without getting stuck.

Take good and soft care of your lawn

Four Powerful In-hub Motors

Manage 33° steep slope and obstacle of 50mm height

Front Omnidirectional Wheels

Unparalleled mobility and agility without getting stuck

Make the best off-road capability in rough terrain

Dual Cutting Plates of 400mm

In-app adjustable cutting height of 30-70mm. Never miss a cut.

Impressive Slope Mowing

LUBA AWD 1000 can mow the steep slope up to 65% (33°), and handle the complex lawns and thick tall grass.

In-APP Adjustable Blade Height

LUBA AWD’s double cutting plate with a 400mm(16 inch) cutting width allows it to cut your grass without missing any areas.

LUBA AWD 1000 is ideal for all types of lawns up to 1000㎡(0.25acre). It has a super high efficiency of mowing up to 350㎡(0.09acre) each hour, allowing your family to spend more time enjoying the picture-perfect grass.

Smart App Control Anywhere

With the Mammotion App, lawn care has never been easier.You can customize mowing tasks, and track real-time mowing status anywhere, anytime. Enjoy your vacation and Luba will take good care of your lawn.

Efficient Multi-Zone Management

With the Mammotion App, You can easily set up mowing tasks for multiple working areas, and create channels between them. Set different schedules, cutting modes and cutting heights for each mowing zone.

Planned Route Modes

Compared to the random mowing pattern of conventional robotic mowers, the planned route algorithm significantly improves Luba’s mowing efficiency. You can have it mow one direction then the other, or define angles to mow.

Smart Obstacle Avoidance

Four ultrasonic radar sensors allow the LUBA to automatically detect and avoid obstacles as small as 5cm (2 inches) with a Field of view (FOV) of 220 degrees.

Powerful Battery Auto-recharge

Luba lithium-ion battery has enough capacity to enable Luba to run 120 minutes and to mow up to 350㎡ (0.09 acre) per hour in a session. When the battery is low, it automatically returns to the charging dock, then continues the interrupted mowing session.

Easily Create No-go Zones

You can create no-go zones for plant beds or children’s playgrounds or pools in App, Luba AWD will automatically avoid them.

Automatic Rain Detection

Tiny sensors atop the Luba robot can detect when rain begins and will automatically send the mower back to the charging station.

Anti-theft System

The app will sound an alarm to notify users when there is unusual movement. Luba supports the lost feature. The original user will be informed of the current position of the lost LUBA when it reconnects to the network. LUBA cannot be used by others if the original user has not granted permission.

TüV Rheinland-certified Quality

The LUBA AWD Series robot lawn mower is committed to providing high-quality performance with TüV Rheinland-certified quality. LUBA provides a quiet mowing experience (60dB) and emissions-free lifestyle.

What Our Users Say

Luba does incredibly well on what is quite a difficult terrain. It is amazingly well built and as you can see, even manages to produce stripes.

I was really amazed at how he can mow really tall grass. Tried with a 700 m2 map, the result was outstanding.

I am super impressed so far! My rideon mower would have gotten stuck! Hats off to the Mammotion team! Great product.

Here LUBA is running on a hill where the slope varies between 15 and 35 degree.

It is doing a surprisingly great job. It cut the whole front lawn today with no interventions. It has every potential to be the leading fully automated lawnmower.

The 4 motors on every wheel have proven super useful. In my first trial, the machine hasn’t had any failures and the GPS position seems to be very accurate, even near the house.

Tech-art Aesthetics and Robust Safety

Mowing in another direction when encountering hard objects.

Stop spinning blades when Luba is lifted or unbalanced.

Smart obstacle avoidance with 220°FOV

Ensure Luba AWD easy clean with sprinklers and has absolute durability in all-weather

• Charging Station
• LUBA AWD 1000
• Power Supply
• RTK Reference Station
• RTK Reference Station Extension Cable(10m)
• RTK Reference Station Power Supply
• Extra One Set Of Blade
• Key
• Installation Kits
• Mounting Pole
• Quick Start Guide

FREQUENTLY ASKED QUESTIONS

If the product does not work as guaranteed during the warranty period, you can request after-sales service by contacting the upcoming local MAMMOTION distributor or email us at support@mammotion.com. The main parts of the lawn mower and battery are covered under a 2-year warranty. Please note that the accessories (Charging Station and RTK Antenna) are under a 1-year warranty while blades and tires do no have warranty. The warranty period for a product is valid on the day when product(s) are delivered from local warehouse for Kickstarter backers’ orders and pre-orders, while the other orders is valid on the purchase date.

• With a perimeter wire, firstly, someone has to install it – this means extra time if you do it yourself, or extra cost if someone else does it. Secondly, the perimeter wire can be damaged by animals or someone putting a spade through it. a break in the perimeter wire can be frustrating.Thirdly, if you want to change the area to be mowed, it means re-laying the wire. Finally, if you decide to move, you need to re-laying again the wire in your new lawn.
• With Luba, forget all the above worries. You just walk with Luba along to draw vitrual bounderies, you can program your multi-cutting zones without the hassle of digging or burying the wires.
• With Mammotion APP, you can remotely preset and update the mowing parameters for each zone, as well as check Luba’s status in real-time. The APP can be used remotely to manage your lawn when you are on a vacation or business trip.
• Luba robotic lawn mower keeps your lawn carpet-like all the time. Luba cuts more frequently in 1-2cm to ensure your grass stay healthy.
• It is quiet, you can run it at any time without worrying about disturbing your daily activity or your neighbours.

Thanks to the RTK-GNSS System, users can easily create and set mowing tasks for separated mowing areas in the Smart app. as well as set channels to connect them for multi-zone management. By setting up the operation parameters of different tasks, the equipment can automatically operate in multiple areas in sequence. Luba can pass the sidewalk when the width is more than 1 meter and surroundings are not severely blocked.

RTK base station does not need to be connected to the charging station. You can put the charging station anywhere you want! If you want to install RTK station on the roof, you will need to have a separate power adapter and extension cord to power RTK reference station.

Does the entire area needs to require Wi-Fi signal or once it gets its command near its charging base it can go complete work and then come back to charge ?

Once the mission is set it get do the whole workflow itself even without Wi-Fi. The Wi-Fi is to help you check the status of LUBA and receive messages remotely on your cell phone.

You can easily perform the installation yourself. A quick start guide will be included in the box. installation course video will comes.

Luba can manage multiple zones,if there is a path between these two yards, Luba can travel to the second yard and do the work automatically.

With Mammotion App, you can remotely preset and update the mowing parameters for each zone, as well as check Luba’s status in real-time.

What Happens If You Run Over An Electric Mower Cord?

Using an electric mower is a great way to maintain your lawn, but a few risks come with it. The main one is running over the electric mower cord while you’re mowing the lawn. Electric mower cords are made with heavy-duty materials and are meant to withstand some damage, but there are still risks to be aware of.

Is Mowing With A Corded Lawn Mower Dangerous?

The main risk that comes with running over an electric mower cord is electrocution. If wires are exposed and the metallic blades come into contact with them, it could send an electric shock through the mower to you.

The following article is a brief guide explaining the dangers of running over an electric mower cord and what to do if this does happen. It also includes a brief analysis about if cordless lawn mowers are safer to use.

Dangers of Running Over an Electric Mower Cord

Electrocution is the main danger that can come from running over a lawnmower cord. It occurs when the high-speed blades tear open the cord and an electric shock runs through the mower and to you. This can result in multiple health risks and even death.

Lawnmower blades spin at very high speeds, usually between 2500 and 3000 RPM, equivalent to 200 miles per hour. Since they spin at such high speeds, they can damage and tear almost anything they encounter, including the power cord.

Once the power cord gets caught on a blade, it’s tough to remove. The blades will continue spinning until either there is no more cord left to eat up or the cord gets tangled in the mower and stops the blades.

The wires in the cords will then get exposed and likely cause an electric shock to run through the mower. This electric shock could reach you and result in electrocution. The health risks that come with electrocution include:

Electrocution can also result in death in extreme cases, but that likely won’t occur if you run over a mower cord.

What To Do If You Run Over an Electric Mower Cord

If you accidentally run over an electric mower cord, DO NOT try to remove the cord from the mower’s blades if it’s tangled. The best way to make sure the cord does not have power running through it is to switch off the breaker. Then make sure the mower is turned off on the machine.

After running over an electric mower cord, the first thing you should do is make sure you haven’t gotten electrocuted. If you aren’t experiencing any of the symptoms mentioned above, then it’s likely you weren’t affected.

If you are experiencing slight symptoms, it’s recommended to call your doctor, apply gauze to the wound, and try not to move the affected area as much as possible. If the shock and symptoms are severe, you will need to go to the emergency room as soon as possible.

Once you make sure you aren’t experiencing any health risks, the next step is to make sure that power is not running through the cord. Turning off the breaker is the safest solution. Once the power is removed from the cord you can then make sure the lawn mower is turned to off.

Important: Never touch a cord that has been run over without ensuring the power has been shut off to the cord. Also, avoid reaching under the mower to untangle the cord without making sure that no power is supplied to the machine.

Are Cordless Lawn Mowers Safer?

Cordless lawn mowers are safer than corded mowers since they don’t have a cord you can accidentally run over. They also are more maneuverable which can lead to a safer mowing experience as well.

The main pros of cordless lawn mowers include the absence of a potentially dangerous cord and being more energy-efficient than corded mowers.

Cordless lawn mowers are usually powered by a rechargeable battery, meaning you don’t have to draw as much electricity from outside sources every time you use it. And since they don’t need a cord to function, you don’t have to worry about accidentally running it over, which makes them safer to use.

However, some cheaper cordless mowers aren’t as powerful as corded mowers and have a shorter running time. So, if you have a large yard or particularly tough grass, then a quality cordless mower, or a corded mower might be best for your needs. Overall, both mowers are good options as long as you are careful while using either of them.

Conclusion

All lawn mowers, cordless, corded, and gas, can be dangerous. Being aware of potential dangers can help you operate the mower carefully and correctly, and avoid any damage to the mower and yourself.

Always be sure to read your lawn mower operators manual to understand what safety precautions you should take with your lawn mower.

If your yard is small, and you are looking at purchasing an electric lawn mower, be sure to check out our article The 10 Best Electric Lawn Mowers For Small Yards. We provide you with the best options on the market for taking care of your yard.