Murray mower deck removal. How Do You Put a Belt on a Murray Riding Lawn Mower

How Do You Put a Belt on a Murray Riding Lawn Mower?

Murray has been getting the job done over the past 9 decades providing both affordable and efficient products such as lawn and garden equipment to the consumers. As Murray is exclusively powered by the world’s driving small engines brand Briggs Stratton, it is a perfect choice for today’s consumers’ reliable, high-value products for their busy lifestyles.

As well as any other machinery, proper and periodic maintenance is essential to keep Murray mowers running properly. The old worn or stretched belt of the mower may need the installation of a new blade belt or a repair. However, replacing a new belt is a much better option as it will help avoid downtime.

Here’s a step-by-step guide on how to change the belt on a Murray riding lawnmower.

Park at a Proper Place

To get started, park the Murray riding mower on a flat and level surface suitable for working. Make sure to set the parking brake after turning the engine off. Set the mower housing to the lowest setting. After that, move the blade rotation control to the “Disengage” position. Pull out the boot from the end of the spark plug.

Extract the hairpins

Check the mower chassis, and disconnect the rear suspension arms. Remove the hairpins from the arms, and then remove the washers next. Remove the arms from the chassis pins and set the hairpins and washers aside in a safe spot.

Unhook the extension spring

First, pull out the hairpins and washers from the suspension links. Remove the links from the mower chassis support. There’s a blade control rod with an extension spring. Remove the extension spring.

Remove the front Hanger

Remove off the front hanger from the chassis support. To do this, pull the hairpin and washer from the end of the connecting rod holding the parts in place. Next, take out the rod and remove the hanger from the chassis.

After that, turn the engine pulley and roll the blade driver belt off. Slide the mower housing out from under the mower chassis.

Pull out the Belt

First, pull out the belt retainer away from the idler pulley. Slowly pull the belt out. Remove the belt from the jackshaft pulley. First, pull the brake pad back, and then remove the belt. You can get a new replacement from a mower repair shop or a home-improvement store.

Install the new belt

To install the new belt, pull the brake pad back and connect the belt to the jackshaft pulley. Place the belt on the idler pulley after pulling the retainer back and. Align the belt to center the “V” side in the pulleys.

Connect the belt to the engine

Center the mower housing by sliding the mower housing back under the mower chassis. Next, connect the belt back to the engine pulley securely. Line up the holes within the front hanger with the holes in the chassis support. Insert the connecting rod through the holes and secure it with a hairpin and washer.

Connect the suspension links

There’s an extension spring, hook it to the blade control rod. Connect the suspension links to the mower chassis supports. Carefully secure them with hairpins and washers.

Place the rear suspension arms to the mower chassis. Raise the mower housing and connect the sparking plug wire back to the tip of the sparking plug.

The belt keeps falling off

A damaged or loose belt might be the reason to come off a riding mower. A broken or worn belt can break and fly off at a high velocity while the engine is running, which can serious injury.

Regularly check the belt for looseness, damage, cracks, fraying, or separation from the rest of the assembly. Repair or replace immediately if necessary. However, it’s a better option to replace with a new one.

FAQ

Mower Deck Belt is 1/2 in. X 88.24 in. sized.

How to check the model number of a Murray lawn mower?

Check out the back of the mower or under the seat for the model numbers on Murray riding lawn mowers. For the push Mowers and walk-behind mowers, you can find model numbers on the center of the deck between the brackets.

To Conclude

Replacing a Murray Riding Lawn Mower belt is not so difficult if you carefully follow through the steps above. Make sure to wear safety equipment and turning the engine off before you make any adjustments. Reach out for professional help for further assistance. You can also read our guide on how to put a belt on a john deere lawn mower.

How To Put A Belt On A Murray Riding Lawn Mower Diagram?

Murray lawn mower is a very prominent name when it comes to lawn mowers. The Murray riding lawn mowers are a great help for people who have small to medium-sized lawns or gardens. They easily trim the grass with the help of these riding lawn mowers.

However, sometimes people do complain about the low work efficiency of these Murray riding lawn mowers. There can be multiple reasons. Sometimes the problem can be in the spark plug. If blades are not sharped over regular periods, it can also reduce the trimming efficiency of lawn mowers. However, in one case a lawn mower stops moving at all. This is a clear symbol that the blade belt in the lawn mower is either broken or loose. In such a case, you have to replace the blade belt with a new one. If you are looking for a step-by-step guide to put a belt on a Murray riding lawn mower diagram, you are on the right page.

Fortunately, this article has enlisted a complete guide to changing the belt on a riding lawn mower.

A complete guide to putting a belt on a Murray riding lawn mower:

Lawn mowers are a regular part of maintenance so it is substantial to keep the machinery in reliable conditions to avoid lawn trimming problems. Often, the blade belt of the lawn makers breaks while working, and this is when the problem starts. Lawn mowers stop moving if the blade belt does not fit perfectly in its place. You can fix the problem with these easy steps.

Make sure the new belt matches the size of the original belt in the lawn mower. For this purpose, you might consider reading the owners manual to get the exact replacement. However, if the manual is not available, you can remove the old belt and read if the details are still visible on the belt. If you still could not find out, google the lawn mower. Put the relevant details, such as years of manufacture for your lawn mower, and try to locate the belt through google.

First of all, you need to collect all the tools that might help you replace the blade belt of the Murray lawn mower.

• Murray Lawn Mower Belt
• Wrench
• Plier
• Screwdriver
• Wooden box
• Cut freehand gloves

Step 1. Take out the spark plug

First of all, place the lawnmower at a leveled surface, so the work becomes easy. Now the next step is, if you just used the lawnmower, let your engine cool down. Then take out the spark plug wire from the spark plug connector. This will ensure that the engine of your lawn mower will not start working unintentionally. Now access the parking brakes of the mower and engage them.

Step 2. Remove moving deck

Before replacing the belt, you have to unwind some areas of the mower.

• First of all, drop the moving deck to the lowest position you can, towards the ground surface.
• Go right back to your rear wheel, here you will find a real in-between wheel and fender.
• Right there would be a visibly big clip.
• Take out the clip. Just right behind the clip, you will find a washer. Take it out as well.
• Now keep them together and mark them as the part you took them off.
• This way it would be easy to place them back.
• Now move towards the right front of the mower. You will find another clip under your footrest.
• This arm connects the mower to the frame. Take out the clip and washer right behind it.
• Now you just need to take off the arms with little pressure through your hands.
• You will see the moving deck has only one attachment now, and that is the belt.
• There will be a belt guide that keeps the belt around the pulley on track.
• Take the belt out of the pulley.
• Now repeat the process on the right side, take off the clips from the back arms.
• Remove the belt from the pulley.
• In some moving decks, there is an extra attachment right in front of the deck, take it off.
• Now you will notice a cable that attaches the moving deck to the upper machinery.
• Take off the clips, and detach the cable from the bracket. The cable is attached to the spring.
• Pull that spring out, and unhook it from the main attached area.
• Your moving deck is now free to change the belt.

Step 3. Install the new belt

Now as you have taken off the moving deck, you can see how the belting is routing around different pulleys. A careful look at the mechanism. You can also make a diagram of the pulleys and belts. Let’s install the new belt now.

Note: always remember that the belt contains two different sides. One is flat and the other is V-shaped. Similarly, the pulleys also vary in shape. In one pulley, you need to keep the V-shaped belt in the inside direction. In other pulleys, keep the flat side in the inside direction of the pulley. Place Flat side of the belt inside, if the pulley is flat on the surface. Similarly, where the surface of the pulley is V-shaped, you will put the V-shape on the inner side of the pulley.

• You can see a belt diagram on the moving deck. If the moving deck is too old, look into the owners’ manual.
• Now, loop the moving deck around all the mandrel pulleys.
• Follow the systemic pattern as it is mentioned on the diagram.
• Now you need to adjust the drive belt, through the idlers’ pulleys.
• Route the drive belt around idlers’ pulleys.
• You also need to route the belt around belt keepers carefully.
• Once you have routed the drive belt around the pulleys and keepers, you can move the moving deck under the frame.
• Reconnect all the attachments, clips, washers, to the arms of the mower.
• Place all the clips and washers back.
• Route the blade through the belt keepers.
• Now reconnect the spark plug.
• Your new drive belt has been successfully installed.

Conclusion

Lawn mowers are an essential appliance when it comes to maintaining trimming and shaping the gardens and lawns. However, sometimes lawn mowers stop moving from the position. One of the main reasons behind this can be rupture of wear of the drive belt. To get the work done, you have to change the drive belt of the riding lawn mower.

You need to detach the moving decks, detach all the arms, clips, washers, and cables that attach the moving deck to the riding surface. Then install the new belt by following the direction, as given on the owners’ manual or as described in the above points. Then attach all the things back, and your lawn however is all set to work again.

Lawn Mowers (504 items found)

Landscaping can be a challenge, no matter the size of your yard. Luckily, Ace carries a variety of quality lawn mowers for sale to maintain all grassy areas of your lawn. And because yard work is never really finished, finding a durable and reliable lawn mower helps you keep your backyard looking its best all year.

From basic to high-tech, our lawn mowers from name brands come in a range of sizes and models to fit your needs, no matter how much grass you have to mow.

Riding Lawn Mowers

Riding mowers are perfect for large lawns or fields that require heavy-duty maintenance and can cut your lawn maintenance time in half. Riding lawn mowers are more powerful than other grass lawn mower styles, so you can drive at an incline while hauling materials as well.

Look for riding lawn mowers with zero-turn capabilities for greater versatility on the job. A zero turn-radius lets you better maneuver around edges and mow cleaner lines in more fluid motions. Ride in style while you level the lawn, saving time and energy.

Gas Lawn Mowers

Gas lawn mowers pack a lot of power into every job and include riding mowers, push mowers and self-propelled lawn mowers. Push lawn mowers cut through thick grass and, as their name implies, require your strength to push them forward – whereas self-propelled mowers just require you to steer, while the machine does all the hard work. Find gas lawn mowers from leading brands like Craftsman, Ariens and Toro for quality mowing you can trust.

Electric Lawn Mowers

Electric lawn mowers are perfect for households with small- or medium-sized lawns. These mowers are more environmentally friendly than gas lawn mowers as they don’t emit the fumes that gas-powered mowers do, and they run quieter than other types of mowers. With many options available from brands like EGO, STIHL, Craftsman and Toro, electric self-propelled mowers only require you to steer and keep them charged up.

Hand Reel Mowers

Hand reel mowers work best if your lawn is small and doesn’t have many bumps or curves, since these mowers are manually powered. You can go back to the basics with reel mowers, as they require little maintenance and don’t need gas refills or access to power. Plus, as a huge bonus for you and the environment, they don’t emit pollutants, making a low-maintenance and eco-friendly option.

Our mower shop also features multiple types of accessories for lawn mowers like baggers, mulching kits, lawn sweepers, blade sharpeners, replacement wheels and blades, filters and different types of maintenance kits to keep your equipment in working condition for years to come.

Shop Ace for Lawn Mowers Near You

Our selection features mower models from some of the most popular names in the industry, including Craftsman, EGO, Toro and many more. Check out our full range of mowers online or visit your local Ace store to explore the lawn mowers for sale near you. Ask our friendly associates for detailed information about specific lawn mower models and get answers to all your lawn equipment questions.

Need lawn mower accessories to accompany the job? MaxPower, Arnold and other top brands have you covered. For more lawn care advice from the experts, you can read through our lawn mower maintenance tips and tricks and find resources to help you tune up your mower, change the oil and more. We provide everything you need to keep your mower going strong and your lawn looking pristine.

Mulching and Mower Decks

What is mulching? Why should I consider doing it? How will it make my lawn look better? Learn all about mulching now.

A John Deere exclusive. The MulchControl™ Kit with One-Touch Technology.

Grass mulch can help keep your lawn healthy and looking its best. It’s easy to do with our many lawn mower and mower deck offerings. Check out the tractor mower compatibility.

This is grass mulch.

The easy way to feed your lawn. To make grass mulch, grass is cut into easily absorbed grass clippings to help keep your lawn healthy and lush.

Mulch with the push of a button.

The John Deere MulchControl™ Kit with One-Touch Technology is the easy way to mulch. With the push of a button you can mulch when you want to.

Mulch mode.

Push the button and mulch. The chute closes and you have a dedicated mulching system. Perfect for regular, weekly, or bi-weekly mowing.

Side-discharge mow or bag mode.

Push the button again, or pull the lever, with your MulchControl™ System, the chute opens and you can side-discharge mow or bag. The choice is yours.

Eight things you need to know about mulch mowing.

Fertilizing your lawn just got easier. Just let your grass clippings do the job for you. Grass clipping mulch is the natural way to feed your lawn essential nutrients. Here are eight things you need to know:

Mulch mowing allows clippings to be cut finely enough so that they can’t be seen when redistributed into the lawn.

Make sure your blades are sharp. Sharp blades help ensure a precise, quality cut.

Mulching returns nitrogen-rich nutrients to your lawn. This feeds your lawn and can reduce the amount of fertilizer you need.

Follow the “one-third” rule when mulch mowing, taking no more off than the top third of the grass blade. Fast-growing conditions will warrant more frequent mowing.

Mulching works better when the grass is dry.

The MulchControl™ System from John Deere is the easy way to mulch while you mow.

If tall or wet grass conditions result in unsightly clumps, your MulchControl™ System should be used in side-discharge mode.

If conditions warrant using your MulchControl™ System in side-discharge mode, clippings are likely to be visible for a few days as they decay.

This exclusive technology is available with One-Touch Technology on the John Deere X350 Select Series Riding Lawn Tractor with a 42-in or 48-in Accel Deep™ Mower Deck and other Select Series mowers.

MulchControl™ Kits, with the pull-of-a-lever technology, are available on S240 Riding Mowers with Accel Deep™ Mower Decks, Select Series Mowers, Signature Series Mowers, and all Residential ZTrak™ Mowers.

All MulchControl™ Kits from John Deere include mulching blades for best grass mulching results.

The science behind mulching.

Who loves lugging a heavy bag of lawn clippings to the compost pile or yard waste bin, or endlessly raking leaves in the fall? Pretty much nobody, that’s who. Fortunately, for the sake of aching backs and nutrient-hungry lawns, it’s best to forgo the bag and opt to mulch lawn clippings and leaves instead.

Each little bit of plant material is full of nutrients, and being organic matter, when left in place, can improve the overall health of the soil which in turn, better supports the turf and potentially decreases inputs.

“In the lawncare industry, we’re realizing that rather than feed the lawn synthetically with fertilizers, we can choose to do it more organically by mulching grass clippings and leaving them on the lawn to sift in,” says Richard Hentschel, University of Illinois horticultural extension educator. “Leaving clippings on the lawn provides the equivalent of 1 pound of nitrogen per 1,000 square feet of lawn. That’s nitrogen you didn’t have to buy and apply.” Removing the clippings means also removing those nutrients from the system.

Besides nutrients, clippings return carbon to the soil, which helps build soil organic matter by feeding the microflora that decomposes that organic matter. Soil organic matter (SOM) is measured as a percentage of organic matter in the soil and is the primary indicator of soil health, and therefore the health of the lawn growing in the soil. The higher the percentage of SOM, the more nutrients and water the soil can retain.

“Every 1 percent of SOM holds 1/3 gallon of water per cubic foot of soil,” Hentschel explains. “So, a soil with a fairly good measurement of 3 percent SOM can hold as much as 1 gallon of water per cubic foot.” The ability to hold more water means more of the water applied to the soil through irrigation or falling on the lawn as rain will stay put and turf will be more resistant to swings in temperature and drought conditions.

“SOM also is Mother Nature’s slow release fertilizer. It’s not just the usual nitrogen, phosphorus, and potassium either, it’s all 16 of the nutrients essential for plant growth,” Hentschel says. Constantly removing lawn clippings and other organic matter results in decreasing levels of SOM, and lawns will become increasingly dependent on the application of synthetic fertilizers.

While lawns benefit from clippings, they don’t want to be smothered by them. Using best mowing practices can leave grass room to breathe and looking as clean as it would with bagging. The key is to mow with sharp blades and frequently enough that no more than 1/3 of the plant tissue is removed per cutting. This will result in less plant material for the lawn to reincorporate per pass.

“If you mow often with a sharp mower blade, even a conventional mower — as opposed to a mower designed specifically for mulching — will cut the grass up fine enough for it to sift back into the standing grass and break up quickly releasing nutrients to the soil and growing grass as it decomposes,” Hentschel says.

It may be a relatively simple task to stay ahead of grass to get a nice fine mulch that disappears quickly into the lawn, but what about leaves in the fall? Hentschel says to go ahead and mulch them, too. Leaves should be mowed frequently as they fall. To ensure finely parsed leaves that will move into the thatch layer more quickly, it may be necessary to make two or more passes with the lawnmower per mowing. When more leaves fall, simply keep making passes to chop up the material and help speed the composting process.

Hentschel says the leaf residue will work its way into the soil taking valuable nutrients with them and creating a barrier that can help control weeds. With multiple years of mulching leaves, which returns more nutrients to the soil through the extra organic matter, lawns may not need as much fertilizer in the spring. And because the leaf residue covers up bare spots where weeds can gain a foothold, it’s possible over time to see fewer dandelions and crabgrass issues after multiple years of mulching.

No raking, no lugging, less fertilizer, more efficient water use, and fewer weeds—for once, the easy choice is also the best choice. Go ahead and leave the mower bag in the shed if you’re so inclined, and leave the organic matter right where it belongs, on the lawn.