Texas cultivator Air filter with your own hands. Malfunctions

Texas motor cultivator repair with your own hands

The main purpose of the walk.behind tractor is the plowing of the field or its hilling. The secondary tasks that lay on it can be snow removal work and transportation of goods (annexed trailer). The same.based tractor is a device built on the basis of a single.axis frame and designed on the basis of a small.sized tractor device. The user, controlling the movement of the walk.behind tractor, follows him. By the type of work, the devices differ in wheeled (caterpillar) and motor.cultivator. In the wheeled device, the traction force is created at the expense of the chassis, and in the motor.cultivate. the tool is installed on the axis immediately. In various models of motoblocks, a different set of mechanisms is used, but, as a rule, a milling motor cultivator is used for household appliances, and the plow installed on the wheels is used for professional. As a tool, a processing cutter or proof is used as a tool.

The idea of ​​creating a small device that performs the operation of a full-fledged tractor during the processing of arable land arose at the beginning of the 20th century in Europe due to the inconvenience of the patency of full-fledged tractors to private fields. So, in 1912, the German company Siemens-Schuckertwerke launched the production of motor cultivators called Siemens Bodenfrase into serial production. At that time, the company produced both small.sized lightweight devices and heavy powerful devices that are not inferior to full.fledged tractors in work.

During the 1920s, other concerns such as Simar, British Anzani Iron Horse, Beeman Traactor became interested in the prospects of the release of devices and established their production. After that, a competition appeared on the market, developing and improving the manufacture of motoblocks.

The design of the walk.behind tractor

First of all, the design of the motor.cultivator depends on the type of engine used in it. It can be both two.stroke or four.stroke, to work on gasoline or diesel. The engine used is the basis of the device, so when the question arises why during operation a single.axic tractor stalls or does not start at all, its nodes are considered to be the culprits. In addition to him, the motor.cultivator includes:

Each part of the device is characterized by its reliability and affects the impeccability of the walk.behind tractor. To a greater extent, this applies to the transmission subject to the greatest load during operation. Nodes and arising problems can conditionally be divided into electrical and mechanical. The mechanical nodes include all the elements involved in the transmission of kinetic energy, and the electronic components that ensure the start of engine and maintenance of the engine are used to electric nodes.

TG500 TG600. User manual. Power Line 2003 /1 engines

1 2003 /1 Operating Instruction Manual Power Line TG500 TG600 TEXAS Andreas Petersen A / S KNULLEN 2 DK-5260 ODENSE S, DENMARK PH FAX

2 attention. carefully read the instructions for operating the engine before starting work. Attention. strictly follow all the recommendations presented in this guide. Attention. stop the operation of the engine before refueling with fuel or oil. Attention. wipe dry fuel or oil wipes. Attention. store the engine as far as possible from combustible materials. Attention. exhaust gases pose a threat to life, operate the engine in the open air or in a well.ventilated room. Attention. Avoid contact with rotating engine mechanisms during its operation. Attention. Avoid contact with exhausts and engine body to avoid obtaining burns. Attention. it is forbidden to operate the engine while under the influence of alcohol or drugs. 2

3 1. 2. Installation 4 3. Oil / oil replacement 4 4. Fuel 5 5. Air filter 6 6. Launch 8 7. Stop 9 8. Operation 9 9. Speak of ignition service specification 10 attention do not forget to moisten the air filter before starting work. Cm. p. 5 3

4 2. Installation installation 1. Install the engine on the base. 2. Make sure the shaft of the pine engine with the shaft of the main product. Engine machine. Otherwise, engine damage may occur. Questions if you have problems with the installation of the engine, refer to the Texas Power Line dealer. 3. Oil / oil replacement Oil use only the current time of the year oil. At 20 C Below 10 C SAE 30 SAE 20 SAE 10W. 30 oil volume regularly check the oil level, the engine should be located on the horizontal surface. Always check the oil level using an oil probe. TG500 TG600 0.5 l 0.5 l of the oil probe high low hole for draining the remains of the opening oil for oil refueling 4

5 Oil change Follow the oil replacement recommendations presented in this guide. one. Leave the engine working for 5 minutes until the oil warms up. This will facilitate the flow of oil from the crankcase and allow you to complete the process of draining the oil. 2. After 5 minutes, stop the engine. Unscrew the drain plug, do not forget to substitute the container where the remaining oils will merge. 3. Then set the drain plug in place and pour fresh oil. four. In the process of filling the oil, adjust the necessary level using an oil probe. Get rid of waste oil without causing harm to ecology. Contact the waste disposal center. four.Fuel Fuel Use non.electrolyted octane gasoline 95 in the required volume. Do not exceed the permissible fuel volume in the tank. The tank has a mark of the permissible level of filling with fuel. TG500 TG600 3.6 l 3.6 l Permissible fuel level in the tank Note for the correct installation insert the fuel filter (1) into the neck of the fuel tank (2), tighten the fuel tank cover (3). one. Fuel filter, 2. Fuel tank, 3. BACK COVER 5

6 5. Air filter Air filter check the air filter, clean it if necessary. If the filter has not been cleaned for a long time, this may affect the engine work and the quality of its exhausts. one. Unscrew the nut from the air filter cover and remove it. 2. Clean the space around the filter. 3. Remove the air filter and check it. Make sure that dirt did not get into the carburetor. four. Clean the sponge element with oil or gasoline. 5. Squeeze the element and let it dry. Drink the element with oil and squeeze the excess oil. Important: if the engine is equipped with a paper element, in no case do not use oil when cleaning the filter. 5. Clean the filter housing. 6. Install the element in place. 7. Make sure that all components are properly installed in the corresponding places 1. If the filter consists of a paper element, cleaning is as follows. 2. Unscrew the nut from the filter cover and remove it. 3. Remove the air filter and check it. Make sure that dirt did not get into the carburetor. four. Check if there are cracks and holes on the filter, replace if necessary. 5. Remove the dirt from the air filter by knocking out the dust or blowing the filter with compressed air. Do not use the brush, because it will drip dust deeper into the element. Replace the filter if it is very contaminated. 6. Install the element in place. 7. Make sure that all components are properly installed in the appropriate places (see. Rice.). one. Gaika 2. Puck-Groover 3. Laying 4. filter cover 5. Haye 6. Air filter 7. Corps 8. cover 6

Features of the replacement of the wedge belt

Clevel belts are the most common on household self.propelled lawn mowers of the rotary type. Their replacement and adjustment is performed according to the following algorithm:

• Install the lawn mower on the side for convenient access to the drive.
• Remove the protection of the drive mechanism by turning away the screws or by the click of the latch.
• Remove the belt lock near the leading pulley.
• Unscrew the knife fixation screw.
• Gently remove the knife.
• Remove the driven pulley from the shaft with the belt.
• Put on a new wedge.shaped belt on the lead shaft.
• Pre.putting the belt on the driven pulley, install it on the shaft.
• Install a knife in your place and fix it with a screw or nut.
• Install the belt lock in place.

In such structures, the adjustment of the drive belt of the lawn mower is usually not provided.

The lineup of the Texas cultivator

The Texas model range consists of several lines:

• Mini trimmer fishing line is designed for small areas, greenhouses and greenhouses, from cultivators it includes Tex 204r.
• The fishing line for a trimmer of light electric cultivators EL-tex is represented by models with a capacity of 740, 1400 and 2000 watts. These units are intended only for prepared land, plowing is prohibited.
• Texas Hobby cultivator is represented by three average models: 380 TG, 500 TGR, 600 BR. They differ in the installed engine, models 380 and 500 have a 2600 watt power unit, and “six.hundred”. 4100.
• The LX trimmer fishing line is designed for heavy soils, the 550TG model has an engine of 3600 kW.
• Not afraid of complex soils in large areas and a fishing line for trimmer TX. Models of TX 601V and 601 TG are distinguished by engines, and the TX 602 unit. the steering wheel device.
• With a lightweight, but without losing functionality, even a woman will cope with the cultivator of the Lilly series. Models 572 V, 530 TG, 532 TG, 534 TG are equipped with a sufficiently powerful engine for work on heavy soils.
• Futura trimmer fishing line, including models 6003 V and 6003 TG, intensively operates in large areas with an engine of 4100 watts.
• Fusion fishing line-practically mini-tractors-heavy productive agricultural wisdoms.

Non.mounted equipment

The execution by the Texas cultivators of various garden, household and household work is ensured by a wide selection of hinged devices: ointment plugs, adapters, rakes, harrows, lobes, wheels with pneumatic tires, metal wheels with primrose, brush brushes, transportation carts, platforms, platforms, platforms, platforms, platforms, platforms. various options for mills, aerators, braids, coupling, weighting.

• Cutters (saber and “goose legs”) are used to cultivate all types of soils, they are made of super.strength steel, which has passed the hardening. The number of knives on soils can vary from 3 to 4.
• The main purpose of the trailer trolley is the transportation of bulk or piece cargo with a carrying capacity of up to 500 kg. The trolley joins the walk.behind tractor using a coupling.
• The same-based tractor in the coupling with the adapter turns into a mini-tractor, the owner of the unit performs all the work sitting.
• Using the coupling to the unit, you can attach any attachment equipment.
• Weighting agents allow you to increase the existing weight of the walk.behind tractor, so the depth of cultivation will increase and the depth of. Weighing weights on the shaft of the walk.behind tractor and, directly, on the wheels.

With the help of hinged equipment (potato tanker, potato.cutter and cun), the Texas motor.cultivator can plant and collection, weeding and hilling of potatoes:

Preparation of the walk.behind tractor for launch

Problems with the start of the motor can arise not only the motoblock and the cultivator who were in use, but also new, just bought in the store. Therefore, before the first time you have a single.based tractor, whether it be a cascade, a mole, a bison, a centaur, a hoper, a tarpan, an eye, a salute must read the guide for its operation, then carefully examine all the connections and, of course, check the oil level in the internal combustion engine.

To study the instructions compiled by the manufacturer, it is necessary to find out what kind of working cycle the engine has: four.stroke (like Forte, centaur, Lifan, bison) or two.stroke

This is important to know, since for models with a two.stroke engine (like a mole cultivator) you need a special combustible mixture, consisting of a certain proportion of gasoline and oil. Due to the discrepancy between the fuel, the technique will stall, and the candles of the fuse and the fuel pipeline can also suffer, which is fraught with the refusal of the gasoline pump-and this is the direct path to expensive repair in one hundred

Determine whether the fuel is suitable for motor vehicles by smoke. With poor quality of gasoline, it will have white color, as is the case with a strong slope of the machine. If you have bad gasoline, then replace it to prevent breakdown.

Fuel quality is also important for a diesel walk.behind engineer. It does not start in the winter, or starts up, but soon stalls if the summer diesel fuel is flooded into its engine, since at low temperatures it begins to thicken and clog the fuel stove

In such cases, the risk of breakdown increases. In cold weather, select the corresponding fuel.

The launch of motor vehicles, both in summer and in winter, should be carried out in a certain sequence. For example, to start the MROT brand motor.cultivator, the following procedure is carried out:

• Open benzovran;
• Put the lever lever in the “chock” position (launch);
• Turn off the ignition and scroll through the motor several times with a manual starter starter;
• Run the engine again and the lever is transferred to the Run position (work).

It is not rare that situations arise when the power unit easily starts, but after a few seconds it stalls. In this case, it is necessary to check the patency of the sump, perhaps the reason is that the crane is clogged. then it is cleaned with gasoline.

Starting motorcycle equipment with a diesel engine (such as a bison, cascade, centaur, nonsense) will be somewhat more difficult than mole. The diesel engine is starting with the “fuel” of the fuel line, that is, from the release of its accumulations. For this:

• Open the fuel supply crane;
• Unwind the compounds of the fuel.ascending channel until the fuel appears;
• Twist the joints and blow the nozzles.

If, after the actions carried out, the engine does not function properly, and the technique is very smokes with white smoke. the reason is in the old lubricant and it should be completely replaced. Diesel does not start due to insufficient volume of oil fluid, so do not forget to control this parameter.

The launch of a motor cultivator after winter or long.term downtime also has its own nuances. In order to bring the car to working condition, the following manipulations are done:

Well, of course, before launching motor equipment, whether it is a centaur, cascade, Neva, Patriot or bison, check all the compounds, including transmission nodes, clutch, starting mechanisms and, if necessary, adjust them.

Gearbox and signs of its damage

Most often, the breakdown associated with the gearbox occurs due to the overload of the device. Such malfunctions are characterized by a shovel of bushings and a string break. At the same time, you should know that if a star is broken, then to install it in place you will need welding. You can find out a typical reducer for checking the gearbox during the repair of the Cascade motornote (or any other company) from the same manual that describes the carburetor configuration procedure. The main breakdowns and methods of their elimination are:

• Clutch sliding. Basically occurs due to strong wear of the disks and the weakening of the compression spring, as well as with a decrease in the distance between the elements of the bearing. To eliminate damage, all worn.out parts are replaced.
• The clutch does not turn off. Such a problem is associated with deforming the friction disk or incorrectly selected oil. Performance is restored by replacing a disk or changing oil.
• An extraneous noise is heard from the gearbox. The reason for the noise is a lack of oil in the gearbox or strong deformation of the gears. The sound of the sound can be a crash binder. Repair occurs by replacing elements with new.
• Speed ​​does not switch or switching occurs with great effort. The solution to the problem will be disassembling the gearbox and with a slight wear of its mechanism, lubrication and grinding of the gears.
• The leak of the oil. First of all, seals for the correct installation and general condition are checked. If necessary, they change. And also a leak can form due to a blockage in the opening of the oil bay.
• When working, strong vibration occurs. Engine mounts are checked and, if necessary, it is pulled up. Vibration appears with improper installation of additional devices. If the same.based tractor uses tires, it is also worth checking the pressure level in them.

It is important to note that if during the repair of a cultivator with a worm gear a problem was found in it, and this is characteristic of the Texas LH model, then it will not work to replace the worn or crushed gears yourself.

Since the device does not allow you to change the load strength, the place of connection of the worm with the gear significantly wears out. Separately, such details are not sold, so you have to change the entire assembly assembly.

In order for breakdowns to arise as little as possible due to the gearbox, you should not only not overload the device, but also add the oil in time. It is best to rinse the gearbox elements in diesel fuel or gasoline. When assembling the gearbox, its gasket is recommended to be added additionally by silicone.

The most powerful Texas motorbide

The most powerful of the company’s models is Texas 601, equipped with a TG 650 B engine. The volume of its working sleeve is 196 cm³, detachable mills are installed on the technique. This model received the most positive reviews of farmers who have to perform large volumes of work.

Cultivators 601 are represented by two types. 601 TG and 601 B, which are distinguished by technical characteristics and capabilities. Both types of motoblocks are refueling with gasoline, the consumption of which is very economical, have an air cooling system, a mechanical starter, speed adjustment, a chain gearbox, a box of velocities that allows the cultivator to move forward and backward.

Service service by the company

TEXAS cultivator repair and equipment service provide specialized centers. The operating instructions list the addresses of repair workshops. The guarantee for the tool is valid for 3 years, so first of all it is necessary to determine the location of the repair center and the possibility of maintenance. This applies to the warranty part of the tool. Pour a lubricant, replace the belt is not a Texas cultivator in any workshop or yourself.

Damage of equipment working in difficult conditions classify:

It is these problems that will require contacting Width = “600 ″ Height =” 449 ″ [/IMG]

Malfunction in the ignition system

First you need to inspect all the details of the fire system, and if they do not have visible damage and pollution, you need to check each component in more detail.

If there is no spark, then the reason is in the spark plug. You need to check the gap and condition of the electrodes. Bar is removed if necessary, but at the same time, experts recommend completely replacing the candle.

You also need to carefully study the inlet and exhaust valve. They must reliably fit the saddles. In the muffler, combustion products gradually accumulate, which leads to the fact that the motor stalls. Periodically you need to clean it.

Antigate guarantee or repairs on your own?

First of all, if a breakdown occurs, you need to check the guarantee.

If there is a warranty card for the goods, you must definitely contact the seller and report the breakdown.

If it suits the warranty conditions, you will repair systems for free.

Cases that are not suitable for warranty service:

• The device failed after extraneous intervention: disassembly or damage from foreign objects.
• The breakdown of the unit occurred due to improper operation.
• The frame or motor of the cultivator was disassembled, there is no warranty sticker.

If you used your motor.cultivator correctly, and it suddenly failed, then check the warranty period.

In the case when the unit is by no means new, and the warranty period has long expired, the repair of motor cultivators can be carried out by yourself, but only if the breakdown is slight. Replacing the engine and other main functional nodes for the user without special skills is a very difficult thing. In this case, you will have to look for a service center that specializes in garden technology.

Most small breakdowns can be solved by replacing some parts, cleaning internal systems and replacing liquids, but it is better to leave professional cultivators’ repair to masters.

Is it possible to fill in car oil?

A variety of lubricants intended for use in car engineers is much wider, moreover, they are sold in more stores, including network hypermarkets. In addition, if such materials are able to protect large and powerful automobile engines, then it would seem that for work in small power plants of cultivators they are quite suitable.

This point of view is quite widely, but it is fundamentally wrong:

• In automobile engines there is a powerful cooling system, in the motor instrument, simple water or air is used for this. Therefore, the probability of overheating of the lubrication here is much higher.
• The frequency of engines for motor vehicles is an order of magnitude higher, therefore, the consumables used here should be adapted to such specific conditions. Otherwise, they will not provide proper protection against wear.
• The packages of the additives used are significantly different.

In addition, car oils-only for 4-stroke engines. Pouring such a lubricant into a 2-stroke engine of the cultivator will lead to deplorable and expensive consequences.

As an alternative consumable for a benzo tool, you can use oils developed for scooters, enduro and other motor vehicles. The working conditions of their engines are largely similar to the specifics of the work of cultivators, therefore, subject to key conditions. viscosity, operational characteristics, engine appliance. such a replacement is possible.

However, in any case, it is best to adhere to the recommendations of the manufacturer of your cultivator. In this case, you provide optimal conditions for its work, prevent its premature wear and, therefore, save your money.

Do not forget about the transmission!

Perhaps no more sensitive to the quality and regularity of maintenance is a gearbox. a gearbox of your cultivator, converting the engine effort into the necessary traction. It must also be lubricated, but the oil here should be used not the same thing that pours into the engine, but a specialized. over, it takes a lot of it here. the gears included in the design of the gearbox should be completely immersed in the lubricant. Otherwise, they will be subjected to excessive loads. and this leads to the rapid wear of the mechanism.

The type of oil suitable for the gearbox of your unit should be clarified by the user manual. it is recommended to use a certain lubricant for each model. However, in most cases, the deviation from these information is not critical. The main thing here is that the main characteristics correspond to the manufacturer’s instructions:

At the same time, it is recommended to observe the advice of the instrument manufacturer if possible.

In addition, you should adhere to the optimal frequency of oil change in the gearbox:

• primary. after 25-50 mothers using the cultivator;
• In the future. every 100-150 mothers (depends on the level of loads);
• If the tool is in storage, then the lubricant should change every 1-2 years.

In this case, it is necessary to take into account the technical condition and degree of wear of technology. The older the cultivator, the higher the loads were on it, the more often the oil should be changed in its gearbox.

Other possible problems

When working as a cultivator, problems associated with the appearance of periodic exhausts may arise, while the device begins to smoke. To get rid of smoke, you will need to drain the remaining fuel and replace it with a less impurities containing less. You should also check if there is a leakage of oil that can fall on the valve and ignite there. The appearance of claps indicates an insufficient fuel level or the occurrence of violations in the operation of the power system.

If sounds occur in the starter area, then the ratchet is an excessive amount of lubricant. And the one side of the device during operation is most often associated with varying degrees of pumping of motoblock tires.

Thus, it is not so difficult to repair a motor cultivator with your own hands. than half of the malfunctions is eliminated by cleaning and replacing consumables with high.quality. And if you periodically perform maintenance and prevent overloads in operation, then you will not have to repair the device.

Antigate guarantee or repairs on your own?

First of all, if a breakdown occurs, you need to check the guarantee.

If there is a warranty card for the goods, you must definitely contact the seller and inform about the breakdown.

If it suits the warranty conditions, you will repair systems for free.

Cases that are not suitable for warranty service:

• The device failed after extraneous intervention: disassembly or damage from foreign objects.
• The breakdown of the unit occurred due to improper operation.
• The frame or motor of the cultivator was disassembled, there is no warranty sticker.

If you used your motor.cultivator correctly, and it suddenly failed, then check the warranty period.

In the case when the unit is by no means new, and the warranty period has long expired, the repair of motor cultivators can be carried out by yourself, but only if the breakdown is slight. Replacing the engine and other main functional nodes for the user without special skills is a very difficult thing. In this case, you will have to look for a service center that specializes in garden technology.

Most small breakdowns can be solved by replacing some parts, cleaning internal systems and replacing liquids, but it is better to leave professional cultivators’ repair to masters.

User manual

Motobobes from the Danish company-a serious gardening technique

For a long and reliable service, it is important to follow the rules recommended by the manufacturer. Before launching a new unit, you need to check the condition of the oil

This is a prerequisite, even if the store was assured that it is flooded. Due to its insufficient volume, you can easily and quickly ruin the engine. Still store oil can be spoiled, as it has been flooded for a long time. The check will greatly simplify the special sensor. If its quantity is enough, you can pour fuel. Gasoline in some models is diluted with oil. For Texas motor blocks, this action is necessary for Powerline engines.

Further, the unoic tractor must be inspected for the reliability of steering thrust, wheels. If the gasoline engine is equipped with an electric starter, you can immediately turn the ignition (models Hobbi, Lilli). In the absence of it, you need to open a gasoline valve, and move the lever to the “launch”, the ignition key should be turned off. Then you need to pull the starter and transfer the suction into a “work” state. Everything, the unit has been started, you can start work.

In order not to do harm to the technique, be sure to read the operating instructions attached to your unit. It, for example, notes that actions after winter downtime depend on storage conditions. Often the unit remains to winter in inappropriate conditions. The best storage location for the Texas motor blocks will be a heated garage or other warm room. For the winter, synthetic oil should be poured into the gearbox. If there is no heated room, fuel replacement is the first condition.

When starting the unit at minus temperatures, the sequence of actions is the same as in the summer. If the device is canned for the winter, experienced gardeners recommend that you unscrew the spark plugs. Cold scrolling of the crankshaft will be useful. Hinged parts must be washed from dirt and treated with a layer of machine oil. Experts advise applying a special polish on top of the oil with protective functions. Funds are sold in the form of a spray and used on the electrical connectors of the unit. The battery available in models with an electric starter is better to transfer to storage to a clean and dry room. During storage, it must be charged several times. To exclude the displacement of engine cylinders during conservation, it is recommended to pull the starter handle several times and open the fuel tap.

There are many disputes about gasoline in the walk-behind tractor, which someone recommends draining, while others say the opposite. The difference in opinion is associated with the types of fuel used. For example, an ordinary diesel will freeze already at.10 ° C. If added to it, its liquid condition will remain until.25 ° C. Therefore, with very cold winters in the region and the presence of a diesel cultivator, it is recommended to drain fuel from it.

Gearbox and signs of its damage

Most often, the breakdown associated with the gearbox occurs due to the overload of the device. Such malfunctions are characterized by a shovel of bushings and a string break. At the same time, you should know that if a star is broken, then to install it in place you will need welding. You can find out a typical reducer for checking the gearbox during the repair of the Cascade motornote (or any other company) from the same manual that describes the carburetor configuration procedure. The main breakdowns and methods of their elimination are:

• Clutch sliding. Basically occurs due to strong wear of the disks and the weakening of the compression spring, as well as with a decrease in the distance between the elements of the bearing. To eliminate damage, all worn.out parts are replaced.
• The clutch does not turn off. Such a problem is associated with deforming the friction disk or incorrectly selected oil. Performance is restored by replacing a disk or changing oil.
• An extraneous noise is heard from the gearbox. The reason for the noise is a lack of oil in the gearbox or strong deformation of the gears. The sound of the sound can be a crash binder. Repair occurs by replacing elements with new.
• Speed ​​does not switch or switching occurs with great effort. The solution to the problem will be disassembling the gearbox and with a slight wear of its mechanism, lubrication and grinding of the gears.
• The leak of the oil. First of all, seals for the correct installation and general condition are checked. If necessary, they change. And also a leak can form due to a blockage in the opening of the oil bay.
• When working, strong vibration occurs. Engine mounts are checked and, if necessary, it is pulled up. Vibration appears with improper installation of additional devices. If the same.based tractor uses tires, it is also worth checking the pressure level in them.

It is important to note that if during the repair of a cultivator with a worm gear a problem was found in it, and this is characteristic of the Texas LH model, then it will not work to replace the worn or crushed gears yourself.

Since the device does not allow you to change the load strength, the place of connection of the worm with the gear significantly wears out. Separately, such details are not sold, so you have to change the entire assembly assembly.

In order for breakdowns to arise as little as possible due to the gearbox, you should not only not overload the device, but also add the oil in time. It is best to rinse the gearbox elements in diesel fuel or gasoline. When assembling the gearbox, its gasket is recommended to be added additionally by silicone.