Why does the gas mall of gasoline champion smoke.

What to do if a gasoline lawn mower is faulty?

Any lawn mower for a long, good operation requires proper operation and maintenance. But, even, observing all the rules of use, unforeseen situations occur, which can lead to a breakdown of technology mechanisms.

With insignificant malfunctions, the user can handle it independently, but with more serious breakdowns it is better to give the tool to professionals to the service center.

In this article we will tell you how to figure out what has broken in a gasoline lawn mower. We will tell you how to fix the malfunction on your own, and in which cases it is better to contact a specialist and avoid problems in the future.

The gasoline lawn mower is not started

If a gasoline lawn mower is not started, you must check:

When identifying a malfunction, carefully inspect the technique. It is necessary to check the fuel tank, air filter, muffler of the lawn mower. Clean the candle and re.connect the wire, set the throttle control lever in another position and the ignition switch.

If the lawn mower did not work out, we perform the following actions. Inspect the spark plug, it must be unscrewed. Check the presence of compression. Take your finger to the place of the candle, press the electric start button or pull the starter handle depending on the lawn mower model. If you have not felt the movement of air with your finger, then there is no compression and there are problems with the engine.

It is better not to correct complex breakdowns yourself if you do not have the necessary experience and practice. You should contact the TMK Service Center Tool, where you will always provide the necessary assistance and quickly eliminate any malfunctions.

Falf of the brake of the quapi

Another reason for the failure of the saw can serve as a malfunction in the brake of the chain. The reason may be clogging the space under the lid or in the wear of the brake tape. In the first case, clicks should be cleaned, in the second. replace the tape.

Details of the chainsaw in the process receive a different degree of deterioration. In order for it to always be in working condition, it is necessary to replace the details in time, which wear out faster. the leading star, tire, chain, parts of the anti.vibration node and a number of others. Follow your tool, carrying out prevention in time, and it will always be in working condition.

The appearance of white smoke

The smoking engine with white gas does not always produce harmless water vapor. White smoke is distinguished from steam according to the following signs:

White thick smoke leaving the exhaust pipe of the machine indicates the malfunctions that arose in the cooling system. The variety of shades of white smoke depends on the type of cooling liquids used, but in any case, with such exhausts, it is necessary to carry out an urgent repair of the engine cooling system.

Incorrect operation of the elements of the cooling system can lead to serious violations in the functioning of the power unit as a whole.

Causes of white smoke:

• coolant entering the cavity of the engine cylinder;
• overheating of the motor;
• Use of low quality coolant.

In case of violation of the tightness of the HBC, the cooling liquid penetrates the cylinders, into the crankcase of the engine pallet. When diluting lubricants with antifreeze or antifreeze, the viscosity of the oil occurs, which significantly affects its functions.

It is decided.Troit and smoke engine.Mole engine Champion G120 HK

Hi all.Worked in the morning well.made a quarter of the garden almost.After it does not develop revolutions, it does not get a bad smoke in black smoke.What happened I don’t understand a carburetor or a candle?She turned the candle in dry black soot. soot on the clip cover and Glushak also in the soot.when I block the fuel valve, before it begins to stall, it is visible at the end of the video.Help find the reason.I have this first 4x honeycomb.Thanks to all !Decided to replace the air filter!Everything works as before, pulls does not smoke!

Комментарии и мнения владельцев 16

Log in or register to write Комментарии и мнения владельцев, ask questions and participate in the discussion.

The motor in the carburetor has a closing of the damper for cold start. Maybe it is covered and the rich mixture goes.

I’ll see, although the damper should not have been covered during operation.Thanks

From above you are a carburetor there is a rubber plug, if there is remove and there will be a nozzle under it, it must be cleaned.

Cheto did not find a plug, a bunch of levers on top of Tuev (((

First of all. a candle, I have long passed to car. The Renovsky double.pin candle from Logan. Sandero used. Secondly, remove the element-air filter- if it works without it, it is useless to blow it to a new one. The third reason, maybe from the oil overflow, above the level, I had so, smoked and zablik, at an angle, it simply flooded the oil above the level and did not check on the horizontal surface.

There was a shimmer, I merged in the arable land I thought overwhelmed, there are 2 flood holes from the rear, but in the front there is no at all.I’ll try to pour exactly 600g of fresh oil.I changed the candle today from Chevrolet Aveo 1.4 (analogue of the native candle) nothing has changed.The filter blown up a new one, I don’t know where to buy in Volgograd, I am especially not going to.I’ll try to start without a filter.1 I will change the oil to a fresh role 600g for my engine.2 I will start without a filter.3 I will wait for the native Championovsky candle in a week to arrive.Thanks for the clues.

First of all. a candle, I have long passed to car. The Renovsky double.pin candle from Logan. Sandero used. Secondly, remove the element-air filter- if it works without it, it is useless to blow it to a new one. The third reason, maybe from the oil overflow, above the level, I had so, smoked and zablik, at an angle, it simply flooded the oil above the level and did not check on the horizontal surface.

I shot an air filter today.It does not smoke, as I put the filter smoke and chokes.The filter could not find in our city where to find.will have to go to Volgograd.

It is useless to blow, wash it, there are pores, I soaked in gasoline, everything is to no use. Only the new helps. And without it you can’t work on a walk.behind tractor, immediately the mirror of the cylinder is scratched with dust, there is an abrasive. This is on the motorized carrier, there is no dust in the snow. You can put any air air, even in the form of an umbrella. Or without it at all.

How to find and eliminate problems associated with smoke in the engine

If you want to independently eliminate the malfunctions in the small.volume engine and repair it.

• Stage 1: You tilt the engine or use it at an angle of more than 15 degrees? The inclination of a lawn mower or equipment can lead to a leak. Level the car before continuing.
• Stage 2: Checking and replacing oil is a simple way to eliminate such malfunctions. Check if the oil shimmers and whether you use the wrong class/type of oil.
• Stage 3: Check the tightness of the crankcase.
• Stage 4: Whether the cylinder head is burned out?
• Stage 5: Whether the rings and (or) cylinder are not worn out?

After you determine the malfunction, you will find detailed engine repair instructions in the Briggs Stratton repair manual, which can be purchased through our website.

Note. You can find and order a certain you can also purchase a repair manual from the Briggs Stratton dealer.

The lawn mower smokes white smoke

Why is my lawn mower producing white smoke?

Chris Desil

The smoke of the lawn mower, which is not accompanied by wear of the engine, often looks worse than it is. If the smoke is white or blue, it means that the engine burns with oil, and although this may indicate an internal problem with the engine, this is usually not the case if the smoke is white. Smoke from burning oil tends to become bluish as the quantity increases. If the smoke is white, it usually comes out during the engine operation.

Normal engine operation

Seals on valves and pistons separate the combustion chamber in a four.stroke engine from an oil crankcase. In addition, the head laying of the head isolates the entire node. When the engine works, and the pistons and valves move, these seals hold the oil in the crankcase, but they wear out normally. When they do this, a small amount of oil can get into the combustion chamber and burned along with the fuel. Despite a small amount, the smoke from this burning oil is white. It becomes bluish, because the seals continue to wear out, and the amount of burning oil increases.

White smoke from a new mowing

Oil can fall into the combustion chamber in other ways. For example, if you turn on the lawn mower to serve a knife, the oil can get directly into the combustion chamber. The same thing can happen when the lawn mower moves uphill with an increase in more than 15 degrees or due to overflowing the crankcase with oil. The smoke that appears is usually short.lived. It turns off if you hold the engine and burn the oil. At first, the color of the smoke can be bluish, but usually it becomes white when most of the oil burns out.

Repair of an electric lawn mower (black log). How to repair a lawn mower if it does not start.

I have an electric lawn mower with the participation of black N boards. I had it about 7 years old. He suddenly stopped working. I replaced

Electric lawn mower. Master / Black Deck, fan and insulator of oars

Repair artisan (just like black boards) electric lawn mower. Replacing a lobed insulator and a broken fan. Change

Posteria oil

Most lawn mowers have a chimney that directs the air from the combustion chamber to the exhaust hole, and this pipe also collects oil spray from the inside of the engine and directs it back to the crankcase. If the air leak reduces some pressure inside this pipe, the oil can be sprayed to the muffler, where it burns and forms white smoke. This will not affect the engine if the oils are not enough to pollute the air filter. If there is, the filter limits the air, with incomplete combustion of fuel, black smoke is formed, and the engine works unevenly and may linger. A highly impregnated air filter often refers to a laying from a blowing head, which requires immediate repair.

What should I do

If your lawn mower is new and it begins to emit white smoke, the best course of action. Let him continue to work to burn the oil. If you stop the engine, it smokes again when you re.start. If your lawn mower is older, a constant flow of white smoke is a sign that the engine needs to maintain. You can continue to use the lawn mower if your neighbors do not complain, but ultimately the engine will begin to lose compression and power. This is always a good idea. Check the air filter; If you see the oil on it, this means that you need to replace the breathing tube or the head overlap.

Symptoms of problems

The first thing the user may notice is a deterioration as the operation of the device. The grass is not molested evenly, there are missing places on the lawn. This is because the engine begins to junk, its power decreases. TOP-5 symptoms indicating a problem:

• Enhanced vibrations of the device.
• Increased noise when working.
• The lawn mower starts and stalls.
• The device is disconnected independently.
• The car whistles.

The main 3 reasons why the lawn mower stalls. improper operation, overload, long.term work (engine overheating). The system is cooled, thanks to the air filter, it should be checked every time when using garden technology. What to do so that the lawn mower does not stall. before turning on the device, check the presence of gasoline in the tank, is there any oil. It is recommended to clean the filter after each mowing.

The lawn mower stalls at high engine speeds

During operation, a situation arises when, when pressing the fuel supply key, the aggregate turnover begin not to increase, but to decrease. A malfunction of this nature can be caused:

• etching of atmospheric air into the combustion chamber;
• problems with the circulation of a mixture of fuel;
• clogging the saapun in the lid of the fuel tank (cleaning the hole with a thin sewing needle);
• Incorrect carburetor adjustment.

When air sunses, when I operate ICE, it is necessary to check the tightness of the pipes and the integrity of the gaskets in the CPG. The problem with the circulation of the fuel mixture can be solved by the elimination of blockages in the fuel pipes leading to the carburetor. If a vacuum occurs in the tank and not receipt of the fuel mixture to the carburetor, it is enough to clean the soundtress with a thin needle and blow it with air.

Use actual promotional codes to buy cheaper!

– 3. Alexander

– 2. Artyom m.

And it is good if the belt extended, not the cable.

After 3-4 years. I decided to replace the air.filter. So “by normal” it is not easy to do it. “Original” filter cost 500-600r. In general, I do not advise looking for original. you need to remove your own and go to the nearest Magaz with it. and pick up the size of 200-300r

– one. Dmitry r.

– one. Vasily Terkin

The main malfunctions of electric trimmers

The reasons why the electric lawn mower does not start and does not work are divided into two main categories. mechanical and electric.

In the first case, the causes of breakdowns can be:

• Blocking knives when trying to mow too hard grass or shrub. In this case, the cylinder is freed from stuck grass and scroll through the other way.
• Blunting or damage to knives. Knives sharpen or replace.
• Incorrect location of the knives, leading to deterioration of equipment handling, reducing the quality of work. The problem is corrected by regulating the gap.
• Vibrations and rattling of the device due to weakened bolted joints. Bolter compounds regulate.
• In models with fishing line, problems with a trimmer reel are possible. A trimmer fishing line may end, break off or get confused.

Electric malfunctions:

• The reason that the electric gas mobility stalls immediately after starting or during operation, may be a break in the supply cable or the disappearance of power supply in the network.
• The electric trimmer for the grass is very warm and can smoke. Overheating of the engine and its probable failure can be caused by too long work or overload, which occurs due to blocking the cutting elements with any extraneous objects. Sparking and the appearance of smoke can be triggered by incorrectly selected brushes or their incorrect location.
• One of the reasons why the electric lawn mower is not starting is the malfunction of the control button.

The most common breakdown of motorcycle

The malfunctions of gasoline devices can also be divided into two main types. engine breakdown and mechanical plan problems.

Problems with a gasoline engine:

• If the lawn mower does not start, starts poorly or immediately stops, then first of all, the ignition is checked, for which it is necessary to dismantle the candle. If it is dry, then problems in the fuel supply system, if wet, are problems with the carburetor. Candles with black soil replace. Also, the cause of this malfunction may be filter clogging. In the presence of oil in the air filter, it is washed, squeezed and dried.
• If the gasoline trimmer for the grass smokes, then the cause may be too much oil in the fuel-oil mixture. White or grayish smoke indicates an too intense engine operation and a lack of lubrication, blue. the excess of oil content, thick black. about poor.quality old fuel.
• The reasons why the lawn mower is warming up is a few. This is gasoline of inadequate quality, inappropriate oil, improper ratio of gasoline and oil, problems with a carburetor, air filter, insufficient lubrication of individual nodes.
• The gasoline trimmer for grass stalls at large speeds. Causes-etching of air in the combustion chamber, improper adjustment of the carburetor, clogging of the saapon in the fuel tank cover, poor circulation of the fuel-oil mixture due to blockages in fuel pipes.
• Benzotrimmer does not work at idle. This problem may occur due to improper control of the carburetor or clogging of the air filter.

Mechanical breakdowns. locking knives too hard and long grass, failure of knives, weakening of fasteners.

It is possible to accurately determine the place and causes of a breakdown of an electric or gasoline trimmer for grass and quickly eliminate it only in a specialized service center. Due to the availability of modern diagnostic and repair equipment and great work experience, experts will be able to cope with the problem of any complexity. Masters will not only repair a fairly new tool, but also restore the working characteristics of old models.

The main malfunctions of the lawn mowers and benzotrimmers.

Often they ask the question of the main malfunctions of motorcycle and lawn mowers. Unfortunately, most often malfunctions arise due to incorrect operation and lack of maintenance. Of course, there is a factory marriage and wear, but more often the equipment fails through the fault of the operator. I know people whose braids for grass for five or more seasons and, in addition to planned maintenance of other attention, these braids do not require grass, although they work quite actively. Therefore, you need to make it a rule, in the season at least once a month, better more often, the braid needs to be washed and lubricated, serviced. Use only fresh fuel mixture, shelf life of the fuel mixture of no more than three months.

Husqvarna lawn mower with the Briggs Stratton engine, very reliable, resource equipment. I acted with a diagnosis: the starter does not turn.

She apparently got it in this life: they are stored on a braid on the street, they pay attention to the minimum, only to work. The braid was transported on its side and the oil fell into the cylinder, it turned out to be a hydroclin. so the crankshaft does not turn. Lawn mowers with a four.stroke engine can be transported only in a standard horizontal position.

We put a new candle, run, the braid for the grass will smoke for some time until all the oil that has entered the cylinder and exhaust.

After the smoke has stopped, soak and drain the oil, put on the side, sharpen the knife, fill the new oil, serve the carburetor, in which there was sand and water, we change the air filter. I hope she will be better.

Another copy from Husqvarna, this time with the Honda engine, a real revolutionary model. Front.wheel drive, large rear wheels. all this allows you to work on not very even lawns. I acted with a diagnosis. it is not moving forward, there is no clutch, crushes grass, poorly mows.

A very convenient mechanism of the transition from the worker to the transport position, the handle folds in literally two movements.

The cause of the malfunction is a drive mechanism clogged with grass. It is amazing that she generally tried to move. Clean and blow out the compressed air drive mechanism.

The reason that the lawn mower is crushing and poorly mows the grass may be a dull knife, or the height of the mowing is incorrectly chosen. Smoot the knife. To choose the right mowing height. user task.

In benzotrimers, drive shafts, gearboxes, adhesion most often suffer from excessive load. It is important to install a fishing line for a trimmer and knives recommended by the manufacturer, to take technological breaks. The second common malfunction is damage to the cylinder-piston group (CPG) due to insufficient or lack of high-quality lubrication in the fuel mixture. Fuel mixture storage for three months.

During transportation, an air filter was broken off, after which the user worked for some time without a filter. Bottom line-destruction of the cylinder-piston group. The cost of repair 3/4 of the cost of braids for grass.

The main malfunctions of the lawn mowers and benzotrimmers.

Often they ask the question of the main malfunctions of motorcycle and lawn mowers. Unfortunately, most often malfunctions arise due to incorrect operation and lack of maintenance. Of course, there is a factory marriage and wear, but more often the equipment fails through the fault of the operator. I know people whose braids for grass for five or more seasons and, in addition to planned maintenance of other attention, these braids do not require grass, although they work quite actively. Therefore, you need to make it a rule, in the season at least once a month, better more often, the braid needs to be washed and lubricated, serviced. Use only fresh fuel mixture, shelf life of the fuel mixture of no more than three months.

Husqvarna lawn mower with the Briggs Stratton engine, very reliable, resource equipment. I acted with a diagnosis: the starter does not turn.

She apparently got it in this life: they are stored on a braid on the street, they pay attention to the minimum, only to work. The braid was transported on its side and the oil fell into the cylinder, it turned out to be a hydroclin. so the crankshaft does not turn. Lawn mowers with a four.stroke engine can be transported only in a standard horizontal position.

We put a new candle, run, the braid for the grass will smoke for some time until all the oil that has entered the cylinder and exhaust.

After the smoke has stopped, soak and drain the oil, put on the side, sharpen the knife, fill the new oil, serve the carburetor, in which there was sand and water, we change the air filter. I hope she will be better.

Another copy from Husqvarna, this time with the Honda engine, a real revolutionary model. Front.wheel drive, large rear wheels. all this allows you to work on not very even lawns. I acted with a diagnosis. it is not moving forward, there is no clutch, crushes grass, poorly mows.

A very convenient mechanism of the transition from the worker to the transport position, the handle folds in literally two movements.

The cause of the malfunction is a drive mechanism clogged with grass. It is amazing that she generally tried to move. Clean and blow out the compressed air drive mechanism.

The reason that the lawn mower is crushing and poorly mows the grass may be a dull knife, or the height of the mowing is incorrectly chosen. Smoot the knife. To choose the right mowing height. user task.

In benzotrimers, drive shafts, gearboxes, adhesion most often suffer from excessive load. It is important to install a fishing line for a trimmer and knives recommended by the manufacturer, to take technological breaks. The second common malfunction is damage to the cylinder-piston group (CPG) due to insufficient or lack of high-quality lubrication in the fuel mixture. Fuel mixture storage for three months.

During transportation, an air filter was broken off, after which the user worked for some time without a filter. Bottom line-destruction of the cylinder-piston group. The cost of repair 3/4 of the cost of braids for grass.