How Drill Attachment Works For Drill Video
Thanks to a large selection of different drill tips, this versatile device can replace many other tools. So, for example, grinding discs eliminate the need to purchase a grinding machine, and the nozzle for tightening screws and self-tapping screws will replace a screwdriver.
Using these snap-ins, you can carry out the following actions:
- drilling holes of different diameters;
When used correctly, the result will be of the same quality as if the work was performed using a special single-purpose tool. not to do without a drill with different nozzles during the construction of the chicken coop, pigsty, cages for rabbits and other farm buildings in the country.
Types of nozzles
All nozzles for drills are divided according to purpose:
- for drilling holes, crowns;
- cutting, scissors "Steel beaver" and "Cricket";
- for drilling at an angle;
- polishing and grinding;
- mills for wood and metal;
A parallel emphasis is used to adjust the immersion depth of the drill, there are also special drilling racks of the bottom for reliable fastening of the tool. In addition to the standard drilling function, blinds can be made with a drill, for example, for installing hinges in wooden furniture. In this case, a Forstner drill is used. The base of the hole is flat, and its edges are absolutely smooth. Or use feather drills instead.
In contrast to the angle grinder, the nozzles on the drill for cutting metals work more delicately, and does not deform the coating of the processed material. The equipment is driven by the tool holder on which it is installed.
For metal cutting, you should choose drill models with a speed of at least 2800 rpm.
Advantages of cutting nozzles:
- flat cut;
- comfortable work;
- easy to use and maintain, no adjustment required.
The drill head “Cricket” is a nibbler with two cutting heads. They are used for cutting thin sheet metal: profile metal sheets, metal tiles, profiled or sheet plastic, as well as polycarbonate. "Cricket" is simply indispensable when erecting a metal profile fence on a site.
"Cricket" is used for sheets of materials with the following parameters:
- the thickness of sheet steel should not be more than 1.5 mm;
- stainless steel up to 1.2 mm;
- aluminum, copper and plastic no more than 2 mm.
The cut after processing this nozzle always remains smooth, without nicks, and the coating is intact.
To make a high-quality and even internal cut, you must first drill a hole.
The nozzle matrix rotates, so you can work with it with both horizontal and vertical surfaces. The recommended number of tool revolutions for using this tool is 3000 rpm, minimum 1500 rpm.
Also, for cutting profiled sheet metal and tiles, the Steel Beaver nozzle-scissors are used.
The principle of operation is similar to the previous nozzle, the incision is due to the frequent reciprocating movements of the punch, which bends the material and breaks it off the matrix. With such a snap, you can make curves and straight cuts. The minimum cutting radius is 1.2 cm. You can work with it at any angle (360 °). Compared to Cricket, the equipment is capable of cutting steel sheet of greater thickness. 1.8 mm. The main advantage of the nozzle is an even cut, and also due to the absence of sparks during operation, the protective coating of the material is not deformed.
At the end of the work, you should carefully handle the sheet material, since the trimmed edge becomes sharp after processing.
Nozzles for grinding and polishing
Using the nozzles on the drill for grinding and polishing, you can carry out the following types of work:
Video: How Drill Attachment Works For Drill Video
- polishing of metal, wooden coatings, as well as glass surfaces;
- grinding of metal, parts from it and other materials;
- removal of corrosion, scale, chipping and old coatings;
- grinding the edges of the glass.
Compared with special tools, these devices have a low price, and can cope with a large number of different tasks, I make any surface perfectly flat and smooth. In addition, they can handle hard-to-reach places where it is impossible to use other tools. But due to their small size, it is difficult to perform a large amount of work.
When purchasing a nozzle on a drill for processing wood or other material, you should carefully study the instructions. Since different types of equipment require different power and the number of revolutions of the tool.
All nozzles for polishing and grinding are a rod on which grinding material is fixed, for example, foam rubber, felt, brushes or sandpaper.
The following types are produced:
Devices for polishing are divided not only by type of construction, but also by degree of rigidity: hard, soft, super soft, embossed.
The cup nozzle on a drill for grinding wood or other coatings consists of a rod for fixing in a chuck, and a body in the form of a cup filled with hard or light bristles. Most often it is used to remove corrosion or old coatings. Models with soft polishing parts are also available: foam rubber, felt or other similar material. The case is made of durable and lightweight plastic or metal. Soft drill tips are most often used for polishing a car.
Disc and plate
Disk devices, like cup ones, consist of a rod, a body and grinding material. The main difference from the previous model is the direction of the bristles (steel wire, brass brush), it is directed from the center to the edges of the disk. You need to use them carefully, as you can quickly spoil the coating.
Plate nozzles on a drill for polishing or grinding are made on the same principle as for grinding devices. But instead of carving, they are equipped with a movable or fixed rod for fixing in a cartridge. Sandpaper is attached to them with Velcro.
Experts recommend acquiring plate nozzles with a movable shaft, rubber or with a soft and thick layer between the Velcro and the base. Since then you can adjust the angle of inclination of the drill and smoothly repeat the contours of the material.
When working with a hard plate, it is more difficult to control, and even with a slight tilt, it will make a noticeable depression on the surface. As a result, you can completely spoil the material. Therefore, they are recommended to be used only with a firmly fixed tool on the stand.
Fan (flap), drum and end
Grinding fan nozzles on a drill are a small disk in the center, to the edges of which are fixed the petals of sandpaper or other abrasive material. This device is convenient to handle hard-to-reach places, internal cavities or grind holes, as it is able to take any shape. The drills are fixed in the cartridge as well as the previous models, with the help of a rod.
The drums are made in the form of a cylinder with a core coated on the outside with sandpaper. Unlike a plate nozzle on a drill, the machining surface is parallel to the chuck and not perpendicular. They process wood, metal, glass. Most often used for grinding the end of the glass. They are soft and hard depending on the purpose of the destination.
The end faces are a rod, at the end of which the processing material is fixed in the form of a circle or cone. Nozzles work on the principle of a file. Using them, you can increase the diameter of the hole, as well as remove nicks and make the edges smooth.
The angle nozzle on the drill allows you to make holes in places where it is impossible to work in normal mode. The angle can be adjusted or be unchanged. 90 °. Crowns are used for drilling large holes in wood, concrete, ceramic and tile, metal and other materials. They are made of high-quality steel so that the holes are smooth, without chips and cracks.
The drill nozzle for sharpening drill bits is a body with a leash and a grindstone inside. Sharpening holes have different diameters. Their number can reach 15 pcs. Mixer heads are used to mix various solutions, paints and other mixtures. They are selected depending on the consistency. There is also a special nozzle for tightening screws or screws, but it should be purchased for drills equipped with a speed reduction function.
For poultry owners, a removable nozzle for a drill for plucking a bird is developed. She instantly and safely removes all feathers from the carcass. In this case, the skin and meat are not damaged. Before work, it is not necessary to first scald the carcass or process it after plucking with a blowtorch.
The nozzle on the drill for plucking birds is easy to use, you only need to secure the tool and hold the bird to it. It is made from easily washed materials and takes up very little space.
For those who work with wood material, milling cutters of various types are available. They allow you to make grooves of various shapes, to process holes or to remove defects. They are spiky and backed.
Before working with any nozzles, you should check the reliability of their fastening in the cartridge and the processed material. The drill must be held with both hands. During operation, be sure to use protective equipment (gloves, glasses).