How to choose a coil for a trimmer. Review of coils for trimmers EFCO 3060

How to choose an ultralite coil?

For light lures, you need a coil with a dough from 3-8 grams. If you plan to use a bait of 3.5 grams or less, then the coil should weigh 160 grams. When baiting a weighing 5 grams or less, a 190 gram coil is best suited.

Choosing a spinning ultralite coil is necessary according to the following criteria: the size of the spool should not be very large: 1000, 1500, 2000. This will allow you to effectively throw light baits on a thin trimmer line, larger bursts will have too wide edges.

Reviews about the coil Bosch K101

The indicated coil for the trimmer universal reviews from buyers mainly receives positive. First of all, the low weight of the model should be noted. The width of the presented modification is 72 mm. The manufacturer’s wrapping system is provided for semi.Automatic type.

The line for the head is selected with a diameter of 1.3 mm. The model copes with the one.Year.Old grass wonderful. As the owners note, wear of the coil is extremely low. With large weeds, owners may have certain problems. It is the cup that breaks most often. The presented coil is worth in the region of 650 rubles.

Bosch K103 overview

This coil for a trimmer (universal, metallic) is in great demand. It weighs only 0.3 kg. Suitable for the instruments of the brands “Hyundai”, as well as “Makita”. Among the features of modification, a strong trimmer line should be noted. The manufacturer’s wrapping system is provided by automatic type. Directly the core is made of metal and is rarely broken.

The height of the head in this case is 67 mm. The cap is used flat, and it is not often erased. Problems are rare with annual grass. However, some users wear out the lid. The protective casing in this case is made of plastic. This coil is sold in the market at a price of 900 rubles.

Coil with automatic winding of trimmer line for trimmer

How to tuck a trimmer line into a trimmer coil? Video instruction

The warranty production of the factory refueling of the trimmer to demand the substitutions of the trimmer line. Having a very approximate idea of ​​how to tuck a trimmer line into a trimmer coil without the help of others, new ones are taken without hunting for this business. But with some abilities, the development of this simple science does not represent any difficulties, and the similar annotation presented below will greatly facilitate the myth of the process.

Preliminary preparation

First of all, to wind the trimmer line, it is required to remove the coil (bobbin, spool) from the trimmer. Certain acts will depend on the difficulty of configuration and the type of product itself:

• Small electronic trimmers with a working location of the motor and coils in the bottom usually have side buttons on both sides of the bobbin. With the simultaneous press there, the highest part of the coil, coupled with the internal contents for winding the trimmer line, is disconnected, although the lower one remains on the trimmer. The analysis of the bobbin is better to create in an even smooth place, so that the spring entering the design does not jump out of it;
• Electronic and gasoline trimmers with a curved rod without the ability to install a knife, you have coils with a special lamb: in similar structures, you should hold a spool in a motionless position with one hand, and the other counterclockwise twist the fixing bobbin on the rod of a barack’s rod. After disconnecting the nut, the whole bobin is removed.
• Electronic and gasoline trimmers with the ability to install a knife on a straight rod (nettles, trimmers of calm) under the bobbin have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and with unhurried rotation, such mutual placement is achieved when the screwdriver enters the holes and the bobin is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer.

For the second and third options of coil, depending on the design, are versed in different methods. In the bobbins with a lamb, lamb is twisted, in the reels with the latches, the fixers are pressed and one part of the coil is freed from the other. If the halves of the spool are connected by thread, then they are quite turned with their hands in the back sides until they are completely developed.

Automatic rogues for trimmers how often they break

These are modern coils that have high reliability and efficiency indicators. The principle of their operation is such that the extension of the cord is carried out when the engine speed is reduced in automatic mode. Kosaryu does not need to control the process of feeding the trimmer line, as this happens in automatic mode.

Automatic type heads cost 2-3 times more than semi-automatic, so not every trimmer owner can afford such devices. However, experience confirms that a good and high.Quality automatic coil for a trimmer or benzo.Oxy serves for a long time, and does not break. Among the advantages of automatic heads, it is also necessary to attribute the high speed of the trimmer line. To do this, the trimmer line is threaded into the holes of the head, and its manual winding is carried out on the reel.

To verify the effectiveness of automatic coils for trimmers will help the test shown in the video below. As experimental “rabbits”, heads of different types are used.

Differences on the principle of charging trimmer line

Types of coils for a trimmer differ on the principle of charging the consumable.

• Fast. The nozzle of the new cord passes without removing the coil from the base. This is very convenient, moreover, it saves time. The tip of the new trimmer line is stuck into the reel and wrapped several times around the surface. As soon as a certain value is reached, the cord is cut off. Typically, this method is used by benzokos.
• Disassembly type. Based on the name, it becomes clear that to replace the trimmer line you need to turn off the ignition and remove the head. The new head is wound into the place of the old one, after which the coil is closed and installed back.

Also, different models of trimmers are equipped with semi.Automatic heads, which, in turn, consist of a pair of parts, corps and a spray. Both elements contain springs. Spool is produced in various versions:

• Single.Section. Uniform winding of trimmer line (both parts).
• Double.Sectional. Each tip of the trimmer line is wound separately, on the corresponding part. As a rule, this type is considered the most comfortable and practical to use. In a two.Section spray, the trimmer line never tangles, and also does not rush.

Feature: you can easily and quickly turn the spool with one section into a two.Section. First you need to find a rather strong plate. The diameter of the spool is measured on it and cut along the contour. The thickness is taken near the place where the trimmer line is wound. It is important that the circle moves freely. The next stage. You need to make an appropriate section on the ring. Then the ring is put on the rogue and fixed with the help of glue strong fixation and adhesive tape. If everything is done correctly, then as a result it will be possible to wrap the trimmer line on different sections.

The transformation of a single.Section coil into two.Section

Universal coils have several holes (from 2 to 4), which are always located opposite each other. The ends cutting the grass are protruding from the holes. There are also types of coils where only a trimmer line of a certain size can be installed. What is interesting, such coils The number of holes can reach 12.

Many users can not adopt to work with such heads, prefer coils tested on their own experience. To replace such a trimmer line, it is necessary to stop the motor, which is not very useful for a gasoline trimmer. In addition, its use leads to an increased consumption of trimmer line, and wielding a trimmer with a coil of this type is convenient only in a flat area, without holes and irregularities. In a word, there are obvious restrictions on use.

Before purchasing a trimmer, you should decide on the type of coils that will be installed on it. This will help to avoid additional costs.

Bosch K103 overview

This coil for a trimmer (universal, metallic) is in great demand. It weighs only 0.3 kg. Suitable for the instruments of the brands “Hyundai”, as well as “Makita”. Among the features of modification, a strong trimmer line should be noted. The manufacturer’s wrapping system is provided by automatic type. Directly the core is made of metal and is rarely broken.

The height of the head in this case is 67 mm. The cap is used flat, and it is not often erased. Problems are rare with annual grass. However, some users wear out the lid. The protective casing in this case is made of plastic. This coil is sold in the market at a price of 900 rubles.

Mowing head for trimmer

It is a special assembled coil, whose snut is placed the cord.

The head for the trimmer is classified according to the method of feeding the trimmer line:

Manual. In this case, the name reads for itself, in other words, the supply of trimmer line is mechanically

If you want to change the cord, it is necessary that the head for the trimmer touches the ground. With all this, a special button is pressed and the anchor mechanism is revealed. Further, lengthening the cord due to centrifugal. The main feature will be that the procedure occurs when the trimmer is included. Automatic. To extend the cord, lower the speed of the motor. Further, with an increase in them, the trimmer line is supplied with automatic.

How to choose the right one coil with a trimmer line for benzocouses or motorcycles in Ukraine. Kosille trimmer head:.

How to make a better sound on the action chamber of a microphone substitution and.

From all of the above, it follows that a hand.Headed head head for a trimmer is an awkward.

Characteristic malfunctions and their independent elimination

Naturally, during operation, the owners of the trimmers are faced with certain malfunctions of mowing heads. Over, they are most often associated with certain difficulties in pulling (lengthening) of the cutting cord from the coil. The most common causes of the lack of trimmer line is its “bite” between the turns or sticking.

If the string is not served

In this case, the cause of the defect is incorrect winding of the cutting cord. The trimmer line can be wound with insufficient tension, which helps to cross the turns together and confuse the string. When the coil rotates, the cutting cord under the influence of the emerging centrifugal force is delayed, which in turn leads to the clamping of the free end of the trimmer line between the turns. To eliminate this malfunction, you need to dismantle the coil, disassemble it and rewind the string so that the turns lie down in even rows, pressing tightly against each other.

If the string sticks together

Squeezing the turns of the trimmer line directly in the mowing head can be caused:

If, nevertheless, the user could not avoid sticking the trimmer line, then to repair the trimmer coil needs to be removed and replaced by the existing cord with a better.

If there is too much string consumption

When using semi-automatic mowing heads, the user can detect the accelerated consumption of the cutting cord due to its spontaneous lengthening. As a rule, this happens due to the weakening of the spring installed inside the coil. You can eliminate the malfunction by putting several goals under the spring.

See also: How to tie a trimmer line in a lawn mower: how to change and charge a coil, how to change and how much to wind it into a trimmer

If the bobbin does not spin

The refusal of the semi.Automatic coil of the trimmer can also be caused by a frequent clash of its head with solid objects (dry branches, soil, stones, etc.). In this situation, there is a slight stretching of the trimmer line, and then the Rapid retraction of it inside the bobbin. Due to severe friction, the cord is heated, which can lead to sticking its turns to each other. To eliminate the defect, the string will need to be rewound.

If the string is served spontaneously

Spontaneous lengthening of the trimmer line, followed by trimming its tips, may be caused by a violation of the order of assembly of the head after replacing the cutting cord. Often, users who do not have sufficient experience forget to install the pressing spring inside the head, which causes premature operation of the mechanism responsible for the supply of trimmer line.

Dismantling the spit head

Starting to repair the head of the trimmer, the owner needs to protect yourself from getting injuries in case of randomly launching the engine, for which you must completely de.Energize the electric garden tool or drown out the engine motorcycles. Most often, the owner of the trimmer is faced with the need to replace the cutting cord. This process is started after the head is dismantled from the shaft. This must be done carefully to avoid damage it.

Dismantle the coil in the following order:

• Having combined the holes available on the axis and washer, the mowing shaft is rigidly fixed by means of a screwdriver or a metal rod;
• Unscrew the executive mechanism, rotating its case clockwise.

Having removed the braid head, they begin to disassemble it, for which you need to carefully open the lid, which is most often attached specially provided for by plastic locks. To do this, squeeze the edges of the lid and at the same time drown in the hull of the latch.

Charging the string in the spool

To charge the trimmer line correctly, it is necessary to act according to the operating instructions attached to the trimmer. As a rule, this operation is carried out as follows:

String trimmer weed eater coil test replace

Cut off the right amount of cord and fold it in half;

On this charge of the spitter head, the cord can be considered complete. The coil is screwed to the shaft of the trimmer, having previously stiffly fix it. How to do this described above. You can check the performance of the head by mowing a small area of ​​the lawn.

Yak Vyabity Kotushka for Trimer?

Along with knives with discs, hairy є є iline rilia garnish for trimers, percelete Shvidko і Acompono Skoshuvati grass. There is a rosmer in Kotushzi, yak utrome. Kotushki are able to get over the mother, structural, the way of serving the hairs. Knowing a special skin type, simpler than PIDIBRATIC OPENITIONAL WARICHIAN for melting minds.

On the rink of ideas, the great vibir trimer is the productive і і ііlovnoye, the same cats for them are the characteristics of the principle of the principle. Correctly PIDIBORY VARIANT VIRISHUVATI PEVNISH DVDANNIA on the Schuvan of the Wonder, to rob the robot of Shvidko, the nonsense of the Zruny.

Kotushki for trimers can be bouti with plastic tags I Mysotivimi. A vicorista vicorista is a shock.Old mother, Tom, Titratni Matereli, not go to the analogue.Shaped analogues. Under Vibor, the cat is so important about the same in the “.

Classifykatsіya in the method of feeding hair

Rijucha Voliin Shvidko stained up, this is the presentation of cognizes on Shvidkosti I Zruchnosti PID Hour of the Skoshvannya.

Handbags for trimer

The cord is served a hand, choba yogo podszhita is not at the same time Zupinity to the robot Trimer I Vityaganuti Kinzi. Tsey species kotushku may of a cold I above the structures, Nybilsh Popular Sredivnikiv Popular.

Automatic cats

Podokenzhni Korda ZdiSit automatically at the Znizhnі turnorv Dvigun. Hair is supplied to Tikh Pir, leave the shift do not get zbil residents. Daniy type of Zruchiye in Expertasii, hollow vicoristovas for glory for great dilies. Before the Minusv, it is possible to vibate the bunches of the varti and the frequency of the breakdown in the paved.

Poplivtomatic cats

Rijuchi hairspay is supposed to be, yak cat, with a solid surface, I once put a button, yak lead in the anchics of mechanism. The cord is poving the pid for the forces, if Dovzhina will be enough, it is not possible to just Pyndeati Trimmer above the surface. Schob Poddzhita Cordi is not a tendency to Vimikati Dvigun.

Poplivtomatical cats are nipped by structural, be a bouti: one- abtu.Osekiyniyi. At the Pershom Vipad, the hairspinch is to be wound up on the offenses, in the other. It is not possible to lay it in the grooves. Dvosektsyina Kotushka entered the bilsh above the Practical Vikoristanni, the hairy in the nie does not plunge.

Takozh is to itch on rinka, UNIVIVILENI MODOLA, Yaki, I can get up on Trimeri VID RIZNIKH VIBRAN.

What is a trimmer

The trimmer means motorcycles or electrocos. In fact, this is one of the variety of lawn mowers (manual mower), which are designed to mow grass. This is a modern braid. Initially, they were developed to carry out agricultural work, however, the main use of the trimmers was precisely the mowing of lawns.

For the first time, the idea to create a trimmer occurred to an American entrepreneur J. Bollas. Passing by car through an automatic car wash, he noticed that the principle of rotating brushes can be used for beveling agricultural crops.

After that, he assembled a primitive trimmer from a tin can (as a coil) and a trimmer line flowed into the holes drilled in it. He installed the resulting design on a pole on which the engine was previously mounted from a moped. The device is a mowing not only wheat, but also grass. Realizing that on the sale of braids he will earn a lot of money, the entrepreneur improved his product and gave him the name “Excellents of weeds”. A feature of the invention was the possibility of a bevel of grass around the trees. The forest perfectly cut the grass, but did not injure the bark.

The main purpose of such a tool was the bevel of grass in small areas in places where classic wheel technology cannot be used:

• In the presence of a large number of shrubs;
• In gardens with a large number of trees;
• Near fences and fences;
• If the site has an uneven relief.

All trimmers have a rod in their composition. The main constructive element. A gasoline or electric engine is attached to the rod from one end, and a coil with a trimmer line is put on the other. The main working element. Over, the type of transmission can be any. It is limited only by the capabilities of the manufacturer and commercial parameters.

Criterias of choice

Before buying a spoon, you should contact the documentation for a trimmer, which indicates the recommended parameters of the mowing heads, the thickness of the trimmer line, the diameter of the landing hole for the coil, type of mount, thread (left or right) and a fixation axis (stiff or rotating at 90/180/360 degrees ). The same information is indicated on the packaging of consumables along with models of technology, on which you can install a specific head.

• Of the three types of coils by the method of serving trimmer line, it is better to choose semi.Automatic. They are more convenient. Among these spools are quick.Charged models, as well as universal samples designed for different trimmers and with holes under the trimmer line of various thicknesses. With this head, you can mow two or three types of grass: soft lawn, wild and tall, with hard stems. For each type of thicket, you will need to buy only a cord of a suitable section, and not a separate coil.
• If only vegetation of a certain type is to mow, you can stop on the coil under the trimmer line of the same diameter. Knives or discs will cope with other tasks.
• Too cheap cutting of brittle plastic heads quickly break, so excessive savings can turn into new expenses.
• You should not install the coils of little.Known brands for trimmers from eminent manufacturers. Popular companies are produced by components that are best for equipment of the same brand.

Often market leaders produce coils for trimmers of other companies. In this case, the replacement will work no worse than the original. For example, the Denzel 96304 working head is suitable for gasoline and electrimmers of the same brand, but is also recommended for use on mower mowers Greenline and MTD.

Among the best manufacturers, it is worth highlighting German companies Al-ko, Bosch, STIHL, Gardena, Swedish Husqvarna, American Black Decker, Patriot, Japanese Ryobi, Makita, Russian Champion, Denzel, Huter, Hoper, Ukrainian Foresta.

A coil for a trimmer

The coil, or the head of the trimmer is an important component of the garden tool responsible for the good mowing of the grass. In today’s market there is a wide selection of coils that have differences in several factors. Below, we consider the features of the classification of the heads of trimmers and the area of ​​application of different types in practice.

Types of coils for a trimmer according to the method of serving cutting trimmer line

The design of the modern trimmer consists of an engine, a bar, control handles and cutting part. As the latter, a disk that is designed to remove weeds, and a coil that is used for mowing grass can act as the latter. Coils are divided by each other by the method. Such types of heads are distinguished on sale:

• Manual. In such reels the trimmer line is served mechanically. To do this, each time you need to stop the work with the trimmer and manually pull the trimmer line from the coil. On the one hand, this may seem uncomfortable, since to pull out the right amount of trimmer line you need to remove the coil from the trimmer. However, it is the manual coil for the trimmer that is considered the most reliable in terms of operation;
• Semi.Automatic. When working with such coils to increase the trimmer line, you need to touch the head of the surface with the head of the surface and at the same time press on a special button that opens the anchor mechanism. Trimmer line is supplied using centrifugal forces. The main feature of such coils is that the supply of trimmer line is performed with the trimmer turned on. The semi.Automatic coil for a trimmer has one significant minus. Relatively high cost;
• Automatic. In such heads the trimmer line is supplied by increasing the speed of the trimmer engine. The main plus of such coils is the convenience of their use. At the same time, the automatic head for the trimmer has several disadvantages. The high cost and frequent breakdowns of the mechanism of trimmer line.

Another type of coils that stand separately from other products is universal coils. The heads of this type can be installed not on one, but on many models of trimmers, which significantly expands the areas of their use. The universal head is characterized by low cost, but it is quite strong and reliable.

Many experts agree that the best option for use on the farm is a semi.Automatic coil. She is quite reliable, and having bought it once, the owner will spend the same amount as when buying 2-3 hand coils.

Classification of heads on the principle of trimmer line

Depending on the method of feeding the trimmer line for trimmers, they are divided into such types:

• “Fast” heads. In these coils, the nozzle of a new trimmer line is carried out without disassembling the product. To do this, the tip of the trimmer line needs to be stuck inside the coil and wrap a couple of times around its surface. As soon as the right amount of the trimmer line is wound, the excess part of it is cut off. Such a mowing head is quite convenient during operation and saves time, especially if a beginner uses a trimmer;
• The collapsible head. By name you can understand that to refuel the reel with a trimmer line, it needs to be disassembled. Then a new trimmer line is wound inside the coil, after which the head of the trimmer is installed on the base;
• Semi.Automatic heads. Their design includes spare parts, spool, housing and springs. The coils of this species are divided into single.Section and two.Section. In products of the first type, the trimmer line is wound evenly on both sides. In two.Section heads, the trimmer line is wound separately from the corresponding side. The coil of the second type is considered the most practical and reliable, since the cutting trimmer line in it will never be confused and will not break.

TOP 3 of the most popular coils for trimmers

Different trimmer heads have their own advantages and disadvantages. We offer you our top 3 most popular models of mowing heads that have practically no shortcomings:

• In third place is a universal coil Bosch K103. Most often this model is used for Makita and Hyundai trimmers. Among the advantages of this head, high strength and a wide range of application should be distinguished. This model is successfully used, as for mowing fresh grass, and for working with dry vegetation;
• The second place is the coil Flymo 15. This coil refers to universal products with semi.Automatic trimmer line. The model is equipped with a completely metal core, which significantly increases the life of the head;
• The first place is the head EFCO 8100. This automatic coil is considered many gardeners the best model in the modern market. It has a slight weight, made of high.Quality materials and is able to withstand minor blows against stones.

All listed models have high quality and are in high demand among buyers. However, when buying them, you should be careful not to purchase an unoriginal Chinese coil released under the name of one of these brands.

How to make a trimmer to a trimmer with your own hands

The coil for a trimmer mows grass, but at the same time it wears out and often requires a replacement. Recently, moto or electrocos has become widespread.

The main working element of such a garden tool is coils with a trimmer line tucked inside. Therefore, it is extremely important to choose a high.Quality element so as not to spend finances in vain, because the device is quite expensive.

To reduce the cost of maintenance, motorcycles can be learned to independently put a trimmer to the forest.

Often manufacturers of a mechanized tool do not equip their products by a number of devices necessary or useful for work, offering to purchase them separately (as an additional option).

With a coil for motorcycles, the situation is different: since this is the main working element of the garden tool, all the trimmers are supplied to them, however, the quality of the coil from the braid kit leaves much to be desired.

Below are the questions about what a trimmer is, what coils are and how to insert and fix the trimmer line yourself.

What is a trimmer

The trimmer means motorcycles or electrocos. In fact, this is one of the variety of lawn mowers (manual mower), which are designed to mow grass. This is a modern braid. Initially, they were developed to carry out agricultural work, however, the main use of the trimmers was precisely the mowing of lawns.

For the first time, the idea to create a trimmer occurred to an American entrepreneur J. Bollas. Passing by car through an automatic car wash, he noticed that the principle of rotating brushes can be used for beveling agricultural crops.

After that, he assembled a primitive trimmer from a tin can (as a coil) and a trimmer line flowed into the holes drilled in it. He installed the resulting design on a pole on which the engine was previously mounted from a moped.

The device is a mowing not only wheat, but also grass. Realizing that on the sale of braids he will earn a lot of money, the entrepreneur improved his product and gave him the name “Excellents of weeds”.

The main purpose of such a tool was the bevel of grass in small areas in places where classic wheel technology cannot be used:

• In the presence of a large number of shrubs;
• In gardens with a large number of trees;
• Near fences and fences;
• If the site has an uneven relief.

All trimmers have a rod in their composition. The main constructive element. A gasoline or electric engine is attached to the rod from one end, and a coil with a trimmer line is put on the other. The main working element. Over, the type of transmission can be any. It is limited only by the capabilities of the manufacturer and commercial parameters.

Why this tool is called differently

The trimmer was originally understood as a hand lawn mower with an electric engine. At the same time, the power of the braid went both from the network and from the battery, which can be installed on the bar or transferred in a special pouches.

The main cutting element is the trimmer line, which creates some restrictions on the type of grass processed: you can only mow plants with a thin and soft stem.

The area of ​​the mowing is limited to the length of the cable or the battery capacity. However, recently, braids with gasoline engines began to be called trimmers.

But electric and gasoline braids were originally varieties of lawn mowers, however, with the advent of the trimmer, these structures are ceased to be in demand and are rarely produced now, and their names have passed to trimmers. Most people are so familiar to this tool.

The specificity of the coil

In the modern world (both in the city and in the village), one cannot do without such a modern and useful tool as a trimmer. It is widely used by employees of public services of large cities, such devices are in demand in farms, they are used to ennoble summer cottages, gardens, gardens, etc.D.

Photo configuration of a coil of a garden trimmer.

However, it should be remembered that the main working element is a head for a trimmer. A coil with a trimmer line. It is this element that most often fails and requires care.

The price of the coils has a wide range (from 10 to 150 dollars), which makes such a tool even more expensive. Any manufacturer (even branded) complete its product usually inexpensive and low.Quality coil.

However, you can work for a long time for a long time and a primitive coil, provided that the work on caring for it is timely.

Coil Trimmer Tool

However, the coils often fail for various reasons, and buy new ones or carry it for repairs that have broken enough. Over, almost all malfunctions can be eliminated independently.

It will not be difficult to disassemble the coil, especially if you use the instructions.

The first detail, which often fails on the coil of the trimmer, is a trimmer line. Trimmer line is a consumable for which the manufacturer does not bear. At the same time, on many models of coils, trimmer line replacement is a complex procedure (and some brands are impossible). An attempt to replace the trimmer line with a material that is different from the parameters of the native trimmer line can lead to the destruction of the coil.

The coil itself (part of the element on which the winding of the trimmer line is carried out) rarely fails, while the grooves through which the working part of the trimmer line is threaded and which hold it can collapse (stand), because they are almost always made of plastic.

Trimmer head (coil). Species, features

Trimmer is a simple and very popular device that helps to maintain lawns, flower beds, parks and gardens in order. Its main advantages can be safely:

• Universality. Changing the cutting element (trimmer line or special knife), you can produce mowing not only grass, but also dense shrubs, vine and shoots of young trees;
• Simplicity in operation;
• Relatively small weight.

Such a mowing unit can operate from an electric network, battery or gasoline engine. Depending on the source of energy, the trimmer set is different, but one of the unchanged elements in all models remain the head of the trimmer. In some instructions, these spare parts can also be called as a reel.

Trimmer head (coil). Species, features

This trimmer element is a special coil, on which the cutting cord (trimmer line) is wound. It is the ends of the cord, which are extended to a certain distance at large speeds that perform mowing grass. It is worth noting that the coil with the cord can only be scattered with low grass, but the high weeds, vine or shrub are able to destroy the cord.

Today there is a coil for a trimmer of different designs in the consumer market. Specialists divide the coils into the following types:

• Manual. To adjust the length of the cord, it is necessary to stop the operation of the unit and manually stretch the trimmer line;
• Semi.Automatic. The cord adjustment is carried out with the engine on, control is carried out using centrifugal force, just press the button on the handle;
• Automatic. To change the trimmer line, it is enough to slow down the doubles of the trimmer, after which the turnover is increased and the trimmer line will automatically lengthen.

From these descriptions, we can conclude that the manual coil for a trimmer is the most uncomfortable design. The automatic design of the coil is convenient when working, but has one drawback. It is not economical, a large trimmer line consumption. Therefore, the most optimal option is the semi.Automatic design.

The heads for the trimmer are also qualified according to two methods

• Quickly charged. To refuel the new cord, there is no need to remove the coil from the trimmer, just insert the end of the cord into a special hole and perform several rotational movements to wind a new trimmer line.
• The winding is collapsible. The coil is removed from the unit and is disassembled. Winding is carried out according to the indicated arrow, after which the head is installed on a trimmer.

From the above material we see that the coils can be different, both in design and in the method of refueling.

Therefore, before paying the trimmer, study the head in detail with which it is equipped.

Rezer Dual-Cut 30064

The model is intended for professional activities. Cales with the span of thick weeds. Made of durable materials, which increases its wear resistance. It has a square section. The trimmer line is sold in a convenient penalty, where it can be stored until completely used. Length is enough for a long period. Tested by specialists on various types of plants.

Review: “Good trimmer line. I use it not so long ago. Often you have to mow grass, so I chose this particular model. I showed myself well in work. I coped with different types of grass: both soft and hard ”.

TOP-4 coils for motorcycle

Among experienced gardeners, the following models of trimmer heads are most popular:

• Bosch K103. Universal coil for a trimmer, weighing 300 g and a height of 6.7 mm. Most often it is installed on Makita and Hyundai brands motor. Inside the nozzle, a cutting cord of increased strength is provided, which easily cuts weeds with a thickness of up to 5 mm. Among the advantages this mowing head, users highlight the relatively low flow rate of the cord. Lengthening the trimmer line in this nozzle is automatically. The design of the coil provides for a reliable steel core, so it quite rarely fails. The nozzle case is made of shock.Resistant plastic;
• The regular head of the trimmer EFCO 3060. This braid coil is highlighted by accessibility and good factory quality. Lengthening the trimmer line in its base device is produced in semi.Automatic mode. The standard fixing diameter of the nozzle is 6.6 mm. The design of the coil is equipped with a threaded adapter. A strong cutting trimmer line is located inside the head, which successfully copes with weeds, up to 3 mm thick. Most often, this coil is installed on trimmers of EFCO, Hyundai and Intertool brands;
• Flymo 15. This mowing head with many gardeners is recognized as the best in the class of universal nozzles. The coil delivery set includes an adapter that allows you to install it on many motos models. Lengthening the cutting trimmer line in this nozzle is made in semi.Automatic mode. The height of the head of the head is 7.4 cm.

EFCO 8100 coil is no less popular in the market. All spare parts of this nozzle are made of steel, and the case is made of durable shock.Resistant plastic. A trimmer line is provided inside the head, 1.3 mm in diameter. This allows you to use a weed cut coil, up to 5 mm thick.