How to make trimmer line

How to cut a bottle into tape

Before you start making a homemade cord, you will need to prepare the material itself, namely a plastic tape of the required width and length. To dissolve a PET bottle onto a tape, various devices are used, the manufacturing algorithm for which can be found on the Internet. If you are going to mow large areas overgrown with grass, and you need a lot of homemade cord, then, of course, it makes sense to make a more complex bottle cutter from a corner or U-shaped aluminum profile. The process of making a bottle cutter is shown in this video.

But if you are not interested in mass production of plastic tape, then from time to time you can dissolve the bottle into strips in a simple way.

  • Take a regular PET bottle cork.
  • Cut it in half (but not completely).
    make, trimmer, line
  • Remove all bumpers inside the cork.
  • After folding the cut cork in half, pierce it through with a knife as shown in the picture below, being careful as the plastic is very hard. To facilitate the process, the tip of the knife can be heated.
  • Use scissors to cut the bottom of the plastic bottle (as straight as possible, without jagging). Insert the bottle into the fixture from the side where the knife blade is sharpened, and start to cut in a little. When a small strip appears, just start pulling it.

Thus, the entire plastic container will dissolve into a tape of the same width.

A -sized version of the bottle cutter, which you will always have at hand, can be made from a regular pencil sharpener, preferably made of aluminum. Details on how to make it are shown in this video.

Trimmer coil modifications

Coils (heads) for the trimmer can be of various modifications. We fill the line in the trimmer. On the example of the trimmer makita um 4030. How to fill the line in the trimmer. Single-line (with one line of fishing line) are suitable for trimming the lawn, and for clearing areas and mowing grass. two-string, with manual string length adjustment or automatic line feed.

Modern manufacturers are increasingly producing versatile lawn mowers with two-string automatic reels.

Do-it-yourself everlasting trimmer line

With this video, I conclude my series of experiments with the everlasting trimmer line. Here I tried to use a diamond grit string for a jigsaw. Option found in another video.

In general, in my videos I talk about a construction site in “one helmet”. I do everything myself. One head and 2 arms. The main directions are construction and repair with your own hands, but I also talk about the garden and vegetable garden, crafts and useful things for the home.

At the moment, I am actively engaged in the decoration and arrangement of my home from SIP panels, which is located in the Moscow region.

I record all stages of construction on video, sharing my experience and my thoughts. I do almost all work for the first time.

I do everything for my own pleasure, which is what I wish for you!

Trimmer line and reel: how to make the right choice

Trimmer line section

There are the following main types of line section:
– square;
– round;
– with sharp edges (in the form of a star).

The cross-sectional shape of the line should correspond to the thickness of the vegetation being cut. Round line is required for lawn and young grass mowing. How to properly wind the line on the Stihl trimmer. The pentahedral and square will be needed if the grass has become coarse, and weeds have appeared on the lawns.

Here the choice depends on the individual model and on the purpose of the trimmer. Such a reel is attached to the trimmer as well as how to install the fishing line on the drum. However, if you need to mow, for example, an old shrub, the line will not work for this, as it will break immediately. For such purposes, it is advisable to use a lawn mower equipped with a metal knife.

Save trimmer line! Super way!

Also see how easy it is to make a trimmer line spider:

However, it is also possible to purchase a fishing line for a cut. Eternal “, because on the line 1 you can make a good trimmer. It is suitable for those who use the braid infrequently, only for domestic purposes.

Trimmer line diameter

The main aspect of the trimmer line is the size of the line. How to make a trimmer with your own hands from an angle grinder, (starter). As in the following picture. It can be 3.2, 3, 2.4, 2 or 1.6 mm. How to do it with and how to replace the line. A horror story about an eternal theme. The thicker the line, the more thick plants can be mowed with a lawn mower. The more popular and common line diameter. 2 mm.

The thickness of the line should match the power of the trimmer engine and match the parameters of your lawn mower model. For a low-power unit, a fishing line diameter of 1.3-1.6 mm is suitable, and for a device designed to work with soft and hard vegetation. 1.8-2 mm.

If you do not know which diameter to choose, check the product passport before purchasing. There the manufacturer indicates the optimal value of the diameter of the fishing line.

Trimmer line and reel composition

The last criterion to pay attention to. the composition of the trimmer accessories. Lawnmower reels are made of plastic.

But the fishing line can be made from a wide variety of materials. How to wind a fishing line on a trimmer according to the use of the price in grass with a fishing line. Among them, nylon is worth noting. How to replace the line for a stihl fs 55 trimmer in the stihl fs 38 trimmer bearing grease. The line made of this material has high wear resistance, can withstand large temperature drops and increased loads. In addition, during long-term storage, nylon does not delaminate and does not lose its performance. All this directly affects the life of the line.

Many users of mowers, both electric and gasoline-powered, some time after using a purchased line, ask themselves the question: what can be used to replace it? If you exclude dangerous options (chain from a chainsaw, a blade from a hacksaw, wire, cable, string, etc.) that can cause serious injuries to the user and others, then the best way out of the situation is considered to be a homemade fishing line from a plastic bottle.

Trimmer line length

How and which line to choose for a trimmer

People who work in the country may need a trimmer, however, not everyone knows what it is, how to choose a line for a trimmer, and what it is for. A trimmer is a device that allows you to carefully cut grass near trees, fences, paths. The operation of the device depends on the type of equipment, which is often used as a cutting line. It affects not only the external condition of the lawn, but also the performance of the trimmer. The main requirements are that it must bend, have strength and rigidity.

  • The main parameters of the trimmer line
  • Thread thickness
  • Sectional shape
  • Line composition
  • Line selection for the lawn mower
  • What nuances should be observed when working

Line selection for the lawn mower

What line to choose for a trimmer is thought by each of its owners. It should be chosen based on the following parameters:

  • The diameter of the trimmer line must be suitable for the engine power. In terms of parameters, it should be combined with the trimmer option.
  • The type of line should be chosen based on the type of vegetation to be cut. If you plan to mow the lawn, a thin line is suitable, for the destruction of perennial weeds. a thicker one.

to the content

Line composition

It is the composition that determines the service life of the line. It is often made from nylon. It wears out slowly and improves performance efficiency at high temperatures and heavy loads. The material retains its working properties for a long time, low temperatures do not affect it, as well as prolonged work.

READ  How to put a starter on a Husqvarna trimmer

Coaxial trimmer line is considered one of the strongest. It has a dense core, and therefore wears out gradually. Such a line is difficult to cut with a knife and creates little noise during operation. Also now there is a fishing line, which includes inclusions of aluminum.

Thread thickness

You can find out about it by reading the performance of the trimmer or by referring to the dimensions and inscriptions on the universal bobbin. Typically, for trimmers, threads with a diameter of 1.2-4 mm are used. True, for each device you will have to select a line of a certain diameter.

The trimmer thread, thinner than the required one, will not immediately disable the engine, although it will significantly increase its wear. If you use a thread that is thicker than necessary, the resistance to rotation will increase, the motor will work harder, overheat and, as a result, break. True, a lot depends on the engine itself.

You can also find out the approximate diameter of the fishing line for the device by the type of engine. If the trimmer is powered by electricity or a battery and its power is 1 kW, you will need a cutting thread with a diameter of 2 mm, and if its power is less than 500 W, use a line of no more than 1.6 mm.

For a gasoline trimmer, the line is chosen with a certain diameter. 2.4. 3 mm. The choice of such a thick fishing line is associated with the peculiarities of gasoline units. they are more powerful and more efficient than their electric counterparts. Thick line can be used for a long time, in addition, it can easily overcome long-term dead wood.

Sectional shape

The most often chosen line for electric scythes with a round cross-section. It is inexpensive and the most popular, it mows fresh grass well. Its main drawback is the noise level that is heard when the trimmer is in operation. Line noise is similar in intensity to engine hum. For the best noise reduction, manufacturers suggest using a spiral-shaped line.

Today they also produce square trimmer line. Of other forms, rectangular and star-shaped are quite often found. Lines with jagged edges and sharp edges are especially productive. These edges cut the grass more evenly.

There are also lines with notches and dents. They can mow large weeds. The noise level emitted by such a line is low, and due to the increased properties of aerodynamics, the trimmer is given additional power. Such a cutting element is installed on powerful trimmers, with which it is planned to carry out work on overgrown, neglected areas.

To work with this type of fishing line, special heads are installed on the lawn mower. The fishing line is wound on them. It handles all kinds of grasses (especially weeds) and shrubs. But its cost is quite high. The consumption of such a line is also high, since when it is fed from the reel, it can be difficult to extract it. It is usually used with discs, into which it is inserted in small sections.

There is also a two-piece twisted trimmer line. Its purpose is high-quality mowing of dead wood. It is distinguished by its round cross-section, tear resistance and increased strength. It comes with a core made from a different material. The twisted line is only suitable for petrol trimmers. She is able to cope even with small shrubs. Its main drawback is its high cost. For daily work, it is quite expensive to acquire a twisted line.

The main parameters of the trimmer line

Fishing lines can be classified according to the following parameters:

  • Thread thickness;
  • Sectional shape;
  • Line composition.

What nuances should be observed when working

When treating a lawn with a trimmer, it is necessary to avoid contact of the line with rigid elements, such as stones, trees, foundation. Contact with them will lead to grinding of the fishing line, and you will have to constantly increase it in length.

The main cutting element of lawn mowers is a reel equipped with a lawn mowing line. Its price is low, and if you follow the basic rules of use, it will last long enough. Today there are fishing lines that differ in their quality, section, properties. The line is usually sold in regular rolls in spools, or cut into lengths for certain lawnmower models. Therefore, take full responsibility for its choice in order to make it easier for yourself and extend the life of the trimmer.

Homemade trimmer line

Many users of mowers, both electric and gasoline-powered, some time after using a purchased line, ask themselves the question: what can be used to replace it? If you exclude dangerous options (chain from a chainsaw, a blade from a hacksaw, wire, cable, string, etc.) that can cause serious injuries to the user and others, then the best way out of the situation is considered to be a homemade fishing line from a plastic bottle.

How to cut a bottle into tape

Before you start making a homemade cord, you will need to prepare the material itself, namely a plastic tape of the required width and length. To dissolve a PET bottle onto a tape, various devices are used, the manufacturing algorithm for which can be found on the Internet. If you are going to mow large areas overgrown with grass, and you need a lot of homemade cord, then, of course, it makes sense to make a more complex bottle cutter from a corner or U-shaped aluminum profile. The process of making a bottle cutter is shown in this video.

But if you are not interested in mass production of plastic tape, then from time to time you can dissolve the bottle into strips in a simple way.

  • Take a regular PET bottle cork.
  • Cut it in half (but not completely).
  • Remove all bumpers inside the cork.
  • After folding the cut cork in half, pierce it through with a knife as shown in the picture below, being careful as the plastic is very hard. To facilitate the process, the tip of the knife can be heated.
  • Use scissors to cut the bottom of the plastic bottle (as straight as possible, without jagging). Insert the bottle into the fixture from the side where the knife blade is sharpened, and start to cut in a little. When a small strip appears, just start pulling it.

Best trimmer line on the planet

Thus, the entire plastic container will dissolve into a tape of the same width.

A -sized version of the bottle cutter, which you will always have at hand, can be made from a regular pencil sharpener, preferably made of aluminum. Details on how to make it are shown in this video.

How to make a trimmer line from a plastic bottle with your own hands

How to make trimmer line

Cut tape from PET bottles, if wound on a trimmer, will mow, but not for long, since it is fragile and breaks quickly. It needs to be improved a little, and for this you need to do the following.

  • Insert one end of the plastic tape into a vise and clamp it.
  • The other end of the tape can be clamped in a drill or screwdriver. Insert it into the chuck of the screwdriver so that it holds well in it and does not jump out when pulled.
  • Turn on the lowest speed on the screwdriver and start twisting the tape, be sure to keep it taut, otherwise it will start to get tangled.
  • After the tape stops curling, without releasing the tension, begin to warm it up with a construction hairdryer. Since this plastic has heat-shrink properties (it shrinks when heated), the turns will be aligned and soldered.
  • While warming up the twisted tape, from time to time turn on the screwdriver and turn the rope to align the turns on it.
  • When you warm up the entire tape, you will have a homemade plastic rope that is quite flexible and durable.
  • In the event that you do not have a drill at hand, you can use a regular stick to twist the plastic tape, as shown in the following figure.
  • The construction hair dryer can be replaced with a regular lighter if you are making a short cord.

As practice shows, the trimmer line, made by hand from one twisted tape, mows the grass well, but if it comes across stones or branches on its way, it quickly wears out. To eliminate this disadvantage, it is recommended to weave a plastic rope from several ribbons, for example, from two or three. The following illustration shows a homemade cord braided from three plastic strips. Although it differs in thickness from a single cord, it is much stronger than the first one, and lasts a longer time.

Next, as usual, the trimmer line is inserted into the mowing head or wound on a reel, and then inserted into the head, after which the protruding ends are cut so that they do not touch the protective cover.

Thus, literally from scrap materials, a free trimmer line is obtained, which can be made in unlimited quantities.

How to cut a bottle into tape

Before you start making a homemade cord, you will need to prepare the material itself, namely a plastic tape of the required width and length. To dissolve a PET bottle onto a tape, various devices are used, the manufacturing algorithm for which can be found on the Internet. If you are going to mow large areas overgrown with grass, and you need a lot of homemade cord, then, of course, it makes sense to make a more complex bottle cutter from a corner or U-shaped aluminum profile. The process of making a bottle cutter is shown in this video.

READ  Trimmer Stihl 55 How To Thread The Line

But if you are not interested in mass production of plastic tape, then from time to time you can dissolve the bottle into strips in a simple way.

  • Take a regular PET bottle cork.
  • Cut it in half (but not completely).
  • Remove all bumpers inside the cork.
  • After folding the cut cork in half, pierce it through with a knife as shown in the picture below, being careful as the plastic is very hard. To facilitate the process, the tip of the knife can be heated.
  • Use scissors to cut the bottom of the plastic bottle (as straight as possible, without jagging). Insert the bottle into the fixture from the side where the knife blade is sharpened, and start to cut in a little. When a small strip appears, just start pulling it.

Thus, the entire plastic container will dissolve into a tape of the same width.

A -sized version of the bottle cutter, which you will always have at hand, can be made from a regular pencil sharpener, preferably made of aluminum. Details on how to make it are shown in this video.

How to make a fishing line with your own hands

Braided line can be used as a lead material. It has several advantages over regular and fluorocarbon lines. First of all, the braid is much stronger. It is not as cut by a shell as a fishing line. Also, the wattle fence has no memory and is absolutely not deformed.

The only drawback that does not allow massive use of the wattle fence is that it does not stretch. This property of the wattle leads to the fact that the fish, after being serrated, tears its lip and gatherings occur. Therefore, sweeping sweeps when fishing on rigs with braided lines can be excluded. Especially if we catch roach or bastards with tender lips.

Most often, braided cord leashes are used in bottom rigs: corks, with method feeders, and a sliding sinker. Hair mounting is made of braids for carp fishing. Generally, the length of cork leashes is 2-4 cm.

It fits in the same way as regular leashes. It is easier to tie the hooks to the wattle than to the line. It turns out a pretty tight grip. Styrofoam is hung on the hooks. When they hit the bottom, they take an upright position, because the foam raises them.

Making a hair rig for carp fishing

Watches are often used when fishing for carp. They look like this:

This is a hair rig for carp fishing. How to do it? We need a braid with a cross section of 0.12-0.14. First, we pass the cord through the loop, as shown in

Cut off the extra tail with scissors and we should get such a small loop:

Next, we need to put on the nozzle through the loop. It can be pop-up, boilie, or peas with corn. We will thread it with a tool for fitting boilies.

We start the boilie along the cord. The hole can be sealed with a loaf crumb to prevent the attachment from sliding off the cord.

Next, you need to fix the thread with the nozzle at a distance of about 1.5 cm from the hook:

Cut off the wattle fence from the other end so that about 20 cm remains of the wattle fence. Then we tie the hook. We make turns as shown in

After that, we insert the free end of the cord into the ring so that it comes out from the side of the sting:

At the opposite end of the cord we knit a regular loop, which will be connected to the main fishing line.

As a result, we got such a hair installation from a braid for carp fishing:

When fishing what kind of fish is best to use a braided leash?

Braided leashes are most often used when fishing for carp, crucian carp, pike and catfish. When fishing for pike, a braid with a section of 0.16 mm is used. In this case, you can hope that she does not bite him. When biting a large catfish, wattle leashes with a diameter of 0.6-0.8 mm are used. These are fairly short leashes. They are not inferior in strength to leashes made of nylon thread, only they are thinner:

As for leashes for feeder rigs, it is better to use the thinnest braid with a cross section of 0.04-0.06 mm. At the bottom, such a leash will be barely distinguishable for fish.

Subscribe to us on social networks. through them we publish a lot of interesting information, photos and videos.

Popular sections of the site:

The fisherman’s calendar will allow you to understand how all fish peck depending on the season and month.

The fishing tackle page will tell you about many popular tackles and accessories for fishing fish.

Fishing tips. we describe in detail living, plant, artificial and unusual.

In the article bait, you will get acquainted with the main types, as well as with the tactics of their use.

Explore all fishing lures to become a real angler and learn the right choice.

In many types of fishing it is necessary to make a loop on the line. Loops are used in various types of fishing rigs and rigs. The main advantage is that even a novice angler can easily make a loop on a line of any diameter. This knot is extremely simple and reliable.

Another important advantage of the hinge is its versatility. By tying a loop, you can attach a leash or main line to it. Alternatively, you can connect the two lines using the loop-to-loop method. Swivel joints can be created using two line loops, often used in feeder and offshore installations.

Let’s take a closer look at the diagram on how to make a loop from fishing line

Fold the line in half to form a loop

We start the end of the loop by forming a ring

We pass the end of the line into the formed loop (we get a knot)

Once again we skip the end of the line into the resulting loop (we get a double knot)

Tighten the knot evenly and cut off the excess end of the line

And according to the same principle we make a loop for a leash.

Next, we tie the leash to the main fishing line by connecting two loops.

This knot is also known as the surgeon’s end loop and is widely used in float, spinning and bottom rigs.

Many users of mowers, both electric and gasoline-powered, some time after using a purchased line, ask themselves the question: what can be used to replace it? If you exclude dangerous options (chain from a chainsaw, a blade from a hacksaw, wire, cable, string, etc.) that can cause serious injuries to the user and others, then the best way out of the situation is considered to be a homemade fishing line from a plastic bottle.

How to make trimmer line

Cut tape from PET bottles, if wound on a trimmer, will mow, but not for long, since it is fragile and breaks quickly. It needs to be improved a little, and for this you need to do the following.

  • Insert one end of the plastic tape into a vise and clamp it.
  • The other end of the tape can be clamped in a drill or screwdriver. Insert it into the chuck of the screwdriver so that it holds well in it and does not jump out when pulled.
  • Turn on the lowest speed on the screwdriver and start twisting the tape, be sure to keep it taut, otherwise it will start to get tangled.
  • After the tape stops curling, without releasing the tension, begin to warm it up with a construction hairdryer. Since this plastic has heat-shrink properties (it shrinks when heated), the turns will be aligned and soldered.
  • While warming up the twisted tape, from time to time turn on the screwdriver and turn the rope to align the turns on it.
  • When you warm up the entire tape, you will have a homemade plastic rope that is quite flexible and durable.
  • In the event that you do not have a drill at hand, you can use a regular stick to twist the plastic tape, as shown in the following figure.
  • The construction hair dryer can be replaced with a regular lighter if you are making a short cord.

As practice shows, the trimmer line, made by hand from one twisted tape, mows the grass well, but if it comes across stones or branches on its way, it quickly wears out. To eliminate this disadvantage, it is recommended to weave a plastic rope from several ribbons, for example, from two or three. The following illustration shows a homemade cord braided from three plastic strips. Although it differs in thickness from a single cord, it is much stronger than the first one, and lasts a longer time.

Next, as usual, the trimmer line is inserted into the mowing head or wound on a reel, and then inserted into the head, after which the protruding ends are cut so that they do not touch the protective cover.

READ  How to change line on a Stihl trimmer

Thus, literally from scrap materials, a free trimmer line is obtained, which can be made in unlimited quantities.

Trimmer line. which is better?

Thickness

Almost all lawn mowers use 1.4-4.0 mm cords. However, before you buy this or that line, do not be too lazy to look into the technical characteristics of the device to find out what thickness of the cord it is designed for.

Important! If the thread is too thin, it can cause premature engine wear. Using an excessively thick cord (over 4 mm) results in increased friction. The result is the same. the engine quickly wears out or burns out. Needless to say, this happens at the most inopportune moment.!

The approximate thickness of the cord can be determined depending on the power source:

  • For lawn mowers up to 1 kW, battery or mains powered, the maximum line thickness is 2 mm.
  • The optimum line thickness for 0.5 kW lawn mowers is 1.5 mm.
  • The thickness of the cord for gasoline appliances is 2.4-3.0 mm. With its help, you can cut not only grass, but also shrubs. It is much more profitable to operate such a cord. If only because it is stronger, and you will not have to change it often.

How to Refill Trimmer Line : Lawn Care & Power Tools

Sectional shape

The most practical option is a round section. Compared to other varieties, such a cord is relatively inexpensive. At the same time, the mowing quality is very good. But the round fishing line has a drawback. a loud noise during the operation of the tool. This problem can be solved by purchasing a line of a spiral configuration. In addition, there are square, star and rectangular cords on sale.

Important! A line with sharp notches around the edges is better at tackling grass.

A special talk is about cords with dents and grooves along their entire length. The thickness of this line is 4 mm. It is used in addition to a powerful lawn mower for overgrown and neglected areas. In this case, the sound from the trimmer is not very strong.

Important! Twisted line is indispensable for cutting dead wood. It has a circular cross-section and an internal insert made of a different material. The cord has significant strength even with a relatively small (1.4 mm) thickness. This thread can only be used on a lawn mower. The cost of the line is quite high. It is purchased not for permanent use, but if you need to perform urgent complex work in 1-2 days.

How to choose a trimmer line. basic rules:

The owner himself decides which thread is better. However, there are several general selection rules that must be followed in any case. The wrong choice can provoke the failure of the device:

  • Select the thickness of the cord in strict accordance with the technical characteristics of the device and the type of engine. For example, a 4mm line is not suitable for a low-powered device.
  • Pay attention to the configuration of the section of the cord. Young grass on the lawn can be cut with a round thin line. Mowing of perennial plants is possible with a fishing line with sharp angles in cross section.
  • When working, try to avoid contact of the cord with hard surfaces. Otherwise, the line will wear out faster.
  • High price and high quality are not synonymous. Therefore, do not try to purchase the most expensive product. To mow slightly grown grass, a budget option with a thickness of 1.2-1.4 mm is enough.

to the content

The trimmer is a great solution for those who have ornamental shrubs or lawns in the courtyard of a country house or in the country. Of course, they look very beautiful, but they need to be cut and trimmed often. Using an electric or gasoline scythe, you efficiently and quickly cut grass, even in the most difficult to access areas. The performance of the device depends on the choice of line. Topic: trimmer line. which is better?

Criterias of choice

Different manufacturing companies use different consumables for the manufacture of fishing lines. To make the right and thoughtful choice, you need to know its main criteria.

Composition, or what the trimmer line is made of:

  • The most common line material is nylon. It is a wear-resistant material that can withstand mechanical stress and fairly significant temperature changes. Nylon retains its strength characteristics for a long time.
  • Coaxial thread is even stronger than nylon. Its validity period is much longer.
  • Now on sale there are lines with aluminum inclusions. Consumers have positive reviews about them.

Homemade trimmer line

Many users of mowers, both electric and gasoline-powered, some time after using a purchased line, ask themselves the question: what can be used to replace it? If you exclude dangerous options (chain from a chainsaw, a blade from a hacksaw, wire, cable, string, etc.) that can cause serious injuries to the user and others, then the best way out of the situation is considered to be a homemade fishing line from a plastic bottle.

How to cut a bottle into tape

Before you start making a homemade cord, you will need to prepare the material itself, namely a plastic tape of the required width and length. To dissolve a PET bottle onto a tape, various devices are used, the manufacturing algorithm for which can be found on the Internet. If you are going to mow large areas overgrown with grass, and you need a lot of homemade cord, then, of course, it makes sense to make a more complex bottle cutter from a corner or U-shaped aluminum profile. The process of making a bottle cutter is shown in this video.

But if you are not interested in mass production of plastic tape, then from time to time you can dissolve the bottle into strips in a simple way.

  • Take a regular PET bottle cork.
  • Cut it in half (but not completely).
  • Remove all bumpers inside the cork.
  • After folding the cut cork in half, pierce it through with a knife as shown in the picture below, being careful as the plastic is very hard. To facilitate the process, the tip of the knife can be heated.
  • Use scissors to cut the bottom of the plastic bottle (as straight as possible, without jagging). Insert the bottle into the fixture from the side where the knife blade is sharpened, and start to cut in a little. When a small strip appears, just start pulling it.

Thus, the entire plastic container will dissolve into a tape of the same width.

A -sized version of the bottle cutter, which you will always have at hand, can be made from a regular pencil sharpener, preferably made of aluminum. Details on how to make it are shown in this video.

How to make trimmer line

Cut tape from PET bottles, if wound on a trimmer, will mow, but not for long, since it is fragile and breaks quickly. It needs to be improved a little, and for this you need to do the following.

  • Insert one end of the plastic tape into a vise and clamp it.
  • The other end of the tape can be clamped in a drill or screwdriver. Insert it into the chuck of the screwdriver so that it holds well in it and does not jump out when pulled.
  • Turn on the lowest speed on the screwdriver and start twisting the tape, be sure to keep it taut, otherwise it will start to get tangled.
  • After the tape stops curling, without releasing the tension, begin to warm it up with a construction hairdryer. Since this plastic has heat-shrink properties (it shrinks when heated), the turns will be aligned and soldered.
  • While warming up the twisted tape, from time to time turn on the screwdriver and turn the rope to align the turns on it.
  • When you warm up the entire tape, you will have a homemade plastic rope that is quite flexible and durable.
  • In the event that you do not have a drill at hand, you can use a regular stick to twist the plastic tape, as shown in the following figure.
  • The construction hair dryer can be replaced with a regular lighter if you are making a short cord.

As practice shows, the trimmer line, made by hand from one twisted tape, mows the grass well, but if it comes across stones or branches on its way, it quickly wears out. To eliminate this disadvantage, it is recommended to weave a plastic rope from several ribbons, for example, from two or three. The following illustration shows a homemade cord braided from three plastic strips. Although it differs in thickness from a single cord, it is much stronger than the first one, and lasts a longer time.

Next, as usual, the trimmer line is inserted into the mowing head or wound on a reel, and then inserted into the head, after which the protruding ends are cut so that they do not touch the protective cover.

Thus, literally from scrap materials, a free trimmer line is obtained, which can be made in unlimited quantities.