How To Properly Cut The Inner Corner Of The Ceiling Plinth

Cutting the inner and outer corners of the skirting board

All complex construction work eventually comes to an end and smoothly flows into the stage of external and internal decorative finishing of the constructed building. Considering the interior decoration of a house or apartment, attention is primarily drawn to the walls, floor and ceiling. With regards to the walls, it should be noted that the most convenient option would be the traditional pasting with wallpaper, which can also be used when decorating the ceiling, now it is very common. If it seems difficult to pick up the wallpaper, or if there is a desire to build something grandiose, then experts will be able to help you by Plastering the inner surface of the walls and ceiling, which is subsequently brought to an extremely smooth and even state and subjected to staining, and, if desired, painting. There is the option of installing suspended ceilings, rack or stretch.

After you have installed the floor or ceiling, the final stage is the installation of the skirting boards, which helps to hide the joints.

In any case, with the correct and responsible approach to business, ceilings and walls will look beautiful and neat. And everything seems to be ready, but something is missing. The resulting picture looks unfinished because the joints between the walls and the ceiling are NOT finished.

Fillets are also called decorative skirting boards, which allow you to close the gaps between the ceiling and the wall.

Ceiling plinth

Ceiling skirting boards are made from different materials. When choosing, the buyer is guided by his requirements.

The plinth is divided into ceiling and floor. From the name it is clear that the ceiling is used as fillets, serving to decorate the junction between the wall and the ceiling, and the floor one decorates the place where the wall and floor meet. Both the one and the other type of skirting boards are now very popular among those who are under construction or are renovating the interior of rooms. The secret of popularity is simple. this is the most convenient way to get rid of shortcomings in the interior decoration of the premises. over, the skirting board is made of a very light material, polystyrene, which has no way of causing any harm to human health. And, most importantly for those who prefer to do everything with their own hands, a person can easily mount a ceiling plinth to the ceiling or the upper parts of the walls. At the same time, a small amount of money is spent on the production of polystyrene skirting boards, which affects its very inexpensive market value. Its cost is charged for one running meter, which is on average 30-40 rubles.

As a rule, there are no problems with joining ceiling plinths. Because the skirting boards, which are sold in small elements. one meter, one and a half or two meters, have perfectly flat edges, which are tightly pressed against each other, and when using glue, the occurrence of gaps between them is completely excluded.

Scheme of joining the ceiling plinth in the corners.

Slowdown mostly happens when it comes to cutting corners. From the first time and by eye, only a highly qualified specialist with many years of experience can cut the correct outer or inner corner. And the amateur who has undertaken such work for the first time will spend more than one time and cut more than one m of the plinth before reaching the desired result. When measuring internal or external, you need to act “by eye” tactics, since the attachment of the plinth to the surface of the ceiling or wall is made at an angle of 38 to 45 degrees. Therefore, cut evenly and glued to the joint, inner corner or outer corner, becomes the result of meticulous measurements, calculations and sawing off. Here is how the popular building principle works nowhere. measure seven times, cut once.

How to cut a plinth into an inner or outer corner?

If you decide to use a clerical knife in order to cut the skirting boards, make sure that it is well sharpened.

The most popular tool for cutting off plastic skirting boards is a utility knife. Make sure that the clerical knife, which you plan to saw off, is very well sharpened. Since the structure of the skirting board, characterized by a high level of strength and rigidity, requires the application of great forces at the time of sawing. And the porous structure of the skirting board, when cutting it with a blunt blade or a hacksaw with large teeth, you risk making the cut wrinkled and uneven or even completely breaking the skirting board. In the event that a clerical knife is not at hand, you can use a well-sharpened kitchen knife instead. He will allow you to do a good job. In order to smoothly cut the corner of the wooden plinth, it is recommended to use an electric jigsaw, which, due to its structure, can change the angle of inclination and in no way spoil the baguette. You will not find a single burr on the mowing line.

Cut out the inner corner for the skirting board

First, you should decide in which direction the parts of the skirting board will be glued. The most correct is the beginning of work from one of the corners of the room. For the premiere corner, choose the one that is not in sight. For example, the one that is located near, and not opposite the entrance. This will allow you to slightly hide the Possible disadvantages of the first corner in your life. And from it it will be possible to diverge in different directions, drives the elements of the ceiling plinth, one after another, and so on until the next corner.

Scheme for trimming the inner corner of the ceiling plinth.

Having decided on the place to start work, we will organize a comfortable workplace for ourselves. What is determined by the need to move a high chair to the corner or, even more convenient, a table from which it will be comfortable for you to try on and glue the corner, and behind it a flat plinth. Plus, organizes a place on the floor where you can conveniently and easily saw off parts of the baseboard and stick express glue on it.

After the preparatory work, you can proceed to directly designing the selected corner. To do this, we take an element of the plinth, which will play the role of the right side of the corner being created, and apply it to the joint, so that its left end part is tightly pressed against the inner corner. Along the mowing line where it joins the ceiling, draw a line with a simple pencil. After that, putting this plinth aside, do not forget that it will be glued to this particular wing of the corner.

After trimming the corners, check the fit and alignment accuracy.

We take the second part. the left side, and try on the end side in the same way, firmly pressed it into the inner corner. And along it we also mark out the line of the connection with the ceiling. On which, after removing this skirting board, there should appear two perpendicularly located to each other and crossed lines. The point of their intersection is the most important for us. It will need to be marked one by one directly on the parts that fold into a corner. On the right, one of them should be drawn, with the introduction of a ruler and a simple pencil, a line connecting the resulting mark with the extreme angle of the opposite side of the plinth. Along this line, cut the corner so that the cut is uniform, that is, both the front and rear walls of the plinth will be cut off.

On the second part of the inner corner, on the left, you also need to draw a fishing line connecting the intersection point of the lines transferred from the ceiling, along which you will need to cut off the corner, which will slightly differ from that on the right side. The difference is that it must be done by slightly tilting the incision angle. That is, the back side of the skirting board should remain in its original volume. After both pieces are cut according to your marks, do not rush to use the glue. First, it is best to apply the resulting parts to the corner dry. This will allow, on occasion, to eliminate some defects, if any. They can be easily corrected by aligning the sides of the joint on the plinth elements that are combined in the corner.

How to make the inner and outer corner of the ceiling plinth with your own hands?

In general, in order to make a beautiful inner or outer corner from a plinth with your own hands, you need to be patient and building material. Proceeding from the fact that almost all rooms of any house or apartment have internal corners, the description of the progress of work should begin with the example of this particular type of corners.

Tools needed to prepare and glue the skirting board

As you know, no room can boast of ideal evenness in the ratio of the angles between the walls and the ceiling. Therefore, it is necessary to carry out measurements and saw off the corners of the plinth with your own hands, with the introduction of a minimum number of tools. Such as:

• Simple pencil;
• Ruler;
• Stationery knife;
• Clay moment, express.

How to die out and correctly cut the inner or outer corner of the baseboard

There are, however, several options for measuring and cutting a right angle into which the plinth should be folded. The first option is to use a tool in this process, which is actively used by a locksmith. this is a construction miter box. With its help, you can quickly and evenly cut angles at an angle, which fold into the corner of the junction of two walls.

When trimming skirting boards, special attention should be paid to the edges of fillet shelves, which can have different thicknesses.

You just need to correctly insert the plinth into the tool and, using a clerical knife, evenly cut the required angle from the correct end of the plinth. But this, at first glance, very easy way to cut corners, which would seem to consist only in acquiring a miter box and correctly inserting a plinth into it, has its pitfalls. The fact is that the angle, plinth, cut at an angle of 45 degrees, namely, these are cut with the introduction of a miter box, will be suitable only in those rooms in which the walls, ceiling and floor are located strictly perpendicular to each other. The miter box will help to make the cut exceptionally smooth and precise.

Outer corner of the skirting board

The outer and outer corners do not differ in the complexity of the setting. The main thing is to learn how to properly cut the baseboards.

Although rare, the outer corners in some rooms are still found. In corridors and walk-through rooms, for example, you can find an outer corner. In order to cut it with your own hands, it is necessary, again, in turn, to mark out along the outer edges of the plinth, applied to the outer corner, two mowing lines, intersecting at the point of joining of the baguettes. The intersection point must be transferred to each of the used baguettes. The corners, again, need to be cut in different ways. The left one should be cut evenly, at about a 45 degree angle. And it ran parallel to the front and back of the baguette. On the right side of the corner to be created, cut off only the back wall of the baguette. Before the cut out parts of the corner are put on glue, it is important to re-attach dry baguettes to the junction of the walls and ceiling in order to eliminate unnecessary worries and problems associated with redoing the entire corner.

The work associated with gluing the ceiling plinth, especially when done independently, requires a good concentration of attention, perseverance and dedication. Which will NOT allow you to abandon the realization of your goal, if you spend an entire hour in one corner, or even more than one. If you are NOT confident in your abilities, I don’t regret the money and contact the specialists who will quickly and efficiently cope with the task. After all, it is better to pay extra for the service than pay for the alteration later.

How to make an outer corner

Just as the mowing line was outlined for trimming the inner corners, the outer corners need to be done. Attach the planks to the wall at the protruding corner. On the ceiling of the tent, there is a line along the length of one baguette, then a line along the other. You will get the intersection point, which should be marked on the upper parts of the skirting board. Draw a line from it to the lower edge of the workpiece (make two sides in this way).

Then work with the marked fishing line of the outer corner of the baguette as follows:

• Place the workpiece in the tray, press it firmly against the front wall of the device and hold it with your hand during operation.
• Set the cutting tool at 45 degrees to the workpiece and carefully cut off the corner.
• Install the counter plinth in the same way, pressed against the front wall of the device.
• Cut at 45 degrees, but in such a way that the angle is directly opposite to the already cut.

After all the corners are cut off, it is required to dock the fillets together, checking for defects in the work. If there are any, remove them by carefully cutting with a knife. As for wooden curbs, the unevenness on them must be removed with a file.

How to cut the correct corner of the ceiling plinth with your own hands

You only need to cut corners on baguettes at an angle of forty-five degrees, which will help to combine both the outer and inner parts of the material. This can be done both through a slotted tray or in its absence by applying the necessary markings on the ceiling or on paper.

To join the fillets with a decorative corner, you need to place the corner exactly in the center between the walls to the ceiling. Attach to it on both sides of the plinth and cut them a little with a clerical knife until they perfectly fit together.

The problem is that the standard sizes of such corners do not always fit the size of the curb, in which case it is better to cut the corner yourself.

How to cut a baguette in the corner of a wall using a machine

The miter box is a U-shaped tray with sides, in which slots are made for the cutting tool. There can be three or more slots, depending on its purpose. The slots are made in such a way as to cut parts from 15 to 135 degrees. In this case, I am interested in a simple tool with a minimum set of slots for cutting at angles of 45-90 degrees.

The tray provides a ready-made template for cutting at different angles. It can be used to trim both internal and external protrusions. In its absence, you can make it yourself. This will require four planks, even and preferably smooth. Knock the tray out of them and proceed to the holes for cutting. Their tents at 45-90 degrees, cut with a thick cutting object or circular saw.

• The ceiling plinth is applied and cut on the middle inside of the tray.
• The baguette is installed in the same way as it is planned for fixing to the ceiling.
• Cutting the workpiece should only be at 90 degrees.
• The side that will be glued to the ceiling should be firmly pressed against the bottom of the tray during operation.
• The border is cut here strictly on the front side.
• For each material from which the skirting board is made, you need to choose the right cutting tool.
• It is best to start cutting fillets from the inner corner, otherwise the part may turn out to be shorter and DO NOT fill the entire length of the ceiling.

Preparatory work

Before starting work, you should prepare the material with which you will have to work. Fillets are made of:

• Wood;
• Gypsum;
• Styrofoam;
• Polyurethane;
• Pvc.

Based on this, you need to prepare the tools. Depending on the material, a device is selected, which will easily cut off the part. Also, there should be glue for attaching the skirting board and a sealant to mask minor defects.

There is also special fittings for decorating corners. they are attached to the joints at the corners. Its benefit is that it can hide some irregularities in work.

Corner trimming tools for skirting boards

Initially, you should decide what exactly to cut. If it is a light material. polystyrene, for example, polyurethane, etc., then a clerical or well-sharpened knife will do. But the most versatile tool for cutting curbs from any material is a metal hacksaw. She cut almost everything, smoothly and quickly.

A ruler and a chalk or pencil will also come in handy, and when manually cutting a plinth, an angular ruler is required.

How to make an inner corner

• Press the fillet to the inner corner in the way it will be glued.
• With a pencil, draw the fishing line along the upper edge of the part (on the ceiling) towards the corner. Next, take the second one and press it in the same way to the second side of the wall.
• Draw the line with a pencil in the same direction towards the corner. As a result, you get the intersection of two lines on the ceiling.
• Then, reattach the skirting board on one side in the same way and mark the intersection of the lines on it. Do the same with the second baguette.

In total, if you draw the line from the mark at the bottom edge of the fillet, you get a flat line at an angle of 45 degrees.
To correctly cut the inner corner of the ceiling molding, follow these steps:

• Transfer the workpiece to the device in the same position as it will be attached to the surface and press it very tightly against the back of the tool.
• The hacksaw will be placed in a slot at 45 degrees to the workpiece, which must be held by hand during work, so that it does not shift.
• Carefully cut the baguette, I control the pressure of the tool so as NOT to damage anything.
• Another piece of the skirting board should also be installed against the back of the device, also firmly pressed and held during operation, avoiding displacement.
• Install the hacksaw at 45 degrees to the workpiece so that it is opposite to the first cut border.
• Cut off. Done!

It is imperative to cut off the plinth from the front side of the product so that the line turns out to be even and clear.

How to cut corners on skirting boards

The ceiling plinth gives an aesthetic appearance to the room after renovation. It hides all minor construction defects, gaps and crevices. Since it runs along the entire perimeter of the room, it must be able to dock at the corners. It is not difficult and is done in a few simple ways.

How to trim corners on curbs without a machine

The device for trimming ceiling corners is suitable under the condition of flat walls, which are located perpendicular to each other and to the ceiling. Otherwise, this unit will not help in any way and the angles will have to be adjusted manually. How to do it?

In the same way, as described above, mark the cutting line for cutting, trying on the plinth to the ceiling. Then, carefully cut them off on a flat surface with a hacksaw, as far as possible, we join them to It is necessary to protrude and trim the flaws. Careful fit will help you cut corners most clearly.

You can draw a diagram of the angle on paper (if it is perfectly straight), using a square, measure the cutting line of the cut along it and cut them evenly along it.

You can also measure the width of the fillet, use a ruler to set aside this value at the bottom of the plank and connect the protruding corner with the marked point with a straight line. Do the same on both opposite planks.

Then dock and see the result: if there are no gaps and everything is cut out clearly, you can glue it. If there are any flaws, the seam turns out to be imperfect. you need to adjust it with a sharp knife, cutting off the excess.

If you use These simple rules and pay attention to the tips, you can independently, without the help of specialists, figure out how to properly cut a corner on the ceiling plinths. It won’t work the first time, you need to practice on the short details first. Since nothing can be hidden on the ceiling, how can you do this on the floor, you need to cut it out carefully, more often I try on the product to the place of further gluing.

The ceiling plinth completes the completeness of the picture of the room after renovation, gives it neatness and should harmoniously fit into the design of the future room.

Miter box cutting: outside corner

Most often, when installing ceiling plinths, home craftsmen are interested in how to properly arrange the interior corners in the room. Cutting outside corners is done less often, but with a certain layout of the walls and it is necessary. Consider how to correctly make the inner fillet using a special tool (miter box).

First you need to purchase a miter box. This tool is a tray in which the part is fixed and trimmed. In order to measure the length of the required product, you need to attach it to the ceiling. Next, you need to install the plinth in the miter box. Its location should correspond to the position it will occupy on the ceiling.

Miter box

How to properly cut the inner corner of the ceiling plinth is a difficult question, the corresponding photos help to answer. Experts recommend studying them, and only after that start work.

After making sure that the product is positioned correctly in the tool, you can start cutting itself. The hacksaw must have a certain angle, namely 45 degrees. During operation, it is not recommended to exert strong pressure on the cutting tool, as the surface can be damaged by the miter box. Then the adjacent fillet is trimmed, which is done in a “mirror” way.

Which skirting board is better to choose?

There are many varieties of fillets, which differ in the following characteristics: material of manufacture, shape, and dimensions. When choosing a ceiling plinth, it is recommended to focus on all these factors, but the material of manufacture is the key point that determines the complexity of processing.

The highest quality polyurethane fillets are considered. However, they are the least suitable for cutting corners, since the material is highly elastic. The easiest way to cut the inner or outer corner of a polyurethane skirting board is to use a miter box. The main disadvantage of such products is their poor resistance to high temperatures, therefore they are prohibited from using in the kitchen.

Galteli

Products made from second materials also have their drawbacks. Ceiling skirting boards made of PVC are prone to dents. In turn, polystyrene foam products break easily, so they must be handled very carefully.

So which skirting board should you choose? There is no definite answer to this question. Experts recommend focusing on the individual characteristics of the premises and the budget calculated in advance.

Miter box cutting: inner corner

The easiest way to get the correct inner corner is to use a professional tool. Of course, such work can be done without a miter box, however, but in this case, more effort will be required. Consider the sequence of actions for cutting an inner corner using a miter box.

The first thing to do is determine the distance from the outside corner to the nearest wall. Further, you will need to mark the plinth, having prepared it for cutting. On the outside of the fillet, you need to draw a fishing line along the length of the measurement. It is worth considering that in this case, the upper part of the die should protrude slightly outward.

Then you can start trimming. For this, the skirting board is placed in the cutting tool and pressed securely against the wall. After cutting the first part, you can start processing the counter element.

How to cut a corner of a ceiling plinth

In this article we will talk about how to properly cut the outer and inner corner of the ceiling plinth with your own hands. This can be done without the use of Special tools, but it should be understood that such work requires care and accuracy.

Cutting corners without miter box

Not everyone has the opportunity to purchase a professional cutting tool. And the expediency of such a purchase is rarely justified, since it spends money on a miter box that will be used only once is not the best solution. You can trim fillets without it. There are several alternative ways to get the right angles.

Manual template preparation

The first and most common option for trimming fillets without using a miter box takes into account the use of a paper stencil. To implement this method, you will need to prepare the following tools and materials:

• Protractor;
• Pencil;
• Cardboard.

We apply a plinth to the cardboard blank and cut it off with a hacksaw. Some craftsmen perform markings on the product itself. In this case, there is a need to use the template.

The second option is to make your own cutting tool. To do this, you need to prepare 3 boards, which have the same dimensions (50 by 15 cm). Next, you need to dock them together. The two side boards, which are the walls, must be fixed to the cross board at right angles. In the next step, you need to mark an angle of 45 degrees on the walls. You can take the necessary measurements using a simple square. The finished tool will allow you to arrange all the corners in the room in a short period of time.

The third method takes into account the use of improvised means. In this case, there is a need to design a template. It can be replaced by an ordinary table, which will need to be moved to the wall. It is necessary to attach a fillet to the corner formed in this way, and then mark it. At the end, the part is cut with a hacksaw or a construction knife.

Indirect corner cutting

Walls do not always have a perfectly flat surface. In this case, it is very difficult to carry out the installation of ceiling plinths, since few people know what exactly needs to be done in such a situation. The most preferable solution to cope with this problem is to mark the corner in place.

For marking, you need to prepare a regular pencil. Before starting work, it is recommended that you familiarize yourself with. In which the nuances of fillet trimming are described. The first step is to attach the plinth to two walls (in turn). Along its edge it is necessary to draw a fishing line, which is marked on the ceiling. The point that corresponds to the intersection of the lines is marked with a pencil.

In the horse, you need to connect a point to the bottom edge of the fillet. Next, trimming is done. It is recommended to use a ruler during work. If the work was done correctly, then the resulting angle repeat the wall relief.

In order to cut the correct corner of the ceiling plinth with your own hands, it is not necessary to use a professional tool. There are other methods that do NOT require anything complicated from the master. In such work, the most important point is the correct markup. Before you start cutting, be sure to make sure that you are doing everything correctly.

Write to us in the comments:

What advice can you give for cutting the corners of ceiling plinths?

How to cut the inner corner of a baseboard. how to cut a baseboard ceiling inner corner

Trimming inner corners

In order to cut the ceiling plinth with the introduction of such a tool, you need to proceed as follows:

• Attach the object to be processed to the place where it will be attached, measure the desired length.
• Install it in our tool in such a way that the position of these two objects coincides.

• Choose a 45-degree position of the hacksaw, moreover, its handle should be as close as possible to your hand, which holds the decor item.
• Cut the workpiece.

• Take a counter plinth strip and install it in the same way to the far wall of the appliance.
• Cut it as described above.

Trimming inner corners

You can cut the ceiling plinth in the corners without a miter box, following this algorithm:

Material

In this article, you learned how to cut a ceiling plinth in corners without and with a miter box. Before gluing the upper skirting boards, you must follow the saying “Seven times measure cut once”, then at the final stage of repair there will be no oversight.

:. Procedure in the absence of a miter box

How to cut off a fillet corner if you have a special tool. a miter box? And is it possible?

Maybe. To do this, you need to go one of the two options below:

• Make markings on the wall;
• Draw a miter box.

The algorithm of actions is as follows:

• The ceiling plinth must be attached to the place of gluing and the necessary measurements must be made.
• After the fillet, you need to put the top on the bottom of the tray with a miter box. In this case, the lower part of the plinth must be pressed against the wall of the tool.
• Next, you need to cut the skirting board at an angle of 45 ° using a saw or knife. When cutting, it is important NOT to overdo it with pressing force, as chips may remain on the plinth.
• You also need to cut off the butt plinth, at the same angle.
• At the end, you need to dock adjacent fillets in the place of gluing, while adjusting the cut line with a knife.

For those who are doing this procedure for the first time, experts recommend practicing trimming skirting boards.

How to cut ceiling plinths in corners?

The plinth, which is attached to the ceiling, performs, first of all, an aesthetic function, dividing two planes. the walls and the ceiling itself. However, in addition to this, such a detail implies another important function. sometimes it hides the errors in wallpapering or finishing the ceiling. Of course, the skirting board will not fit harmoniously in every interior design, but in most cases the interior will look incomplete without using this detail. This article will show you how to trim ceiling plinths in corners using the tools at hand.

How to cut the inner corner of the fillet?

With the introduction of miter box

If the corners and walls in the room are even, you can use a special carpentry tool. a miter box. This is an inverted U-shaped chute in which the mowing line is marked for cutting at 90 ° and 45 °. The part in which you need to make a gash is laid inside, a saw is inserted into the guides. The part is held in place, cut to the desired angle.

This is what the miter box looks like. Can be plastic, wood or metal

In the case of a skirting board, not everything is so simple: they must simultaneously lie on two surfaces, therefore they need to be pressed against one or the other wall of the miter box. When working from the ceiling, they are pressed against the side closest to you.

The sequence of actions when finishing the outer corner, you need to make a gash at an angle of 45 degrees. Place the miter box in front of you. I try on how the plinth will be located, determining which part of it will be attached to the ceiling. In order not to get confused and cut off the ceiling plinth correctly, the bar that will be located on the right, We put the case, then that on the left is on the left.

How to cut a corner on ceiling skirting boards: correctly Install it in a miter box

The part that turns out to be on the ceiling presses against the lower part with a miter box. The other side is closer to you and raised. She is supported on the wall of the device so that she does not stagger when cutting. That is, the front of the skirting board turns out to be turned away from you. Do the cutting direction as shown in the photo below. By folding the two cut pieces together, you get a Protruding. Outside or Outside Corner.

How to Make the Outside Corner of a Skirting Board Using a Chair

First put the cut-off parts in place “dry”, without applying glue. If the geometry of the corner turned out to be not ideal for centuries, you can touch up a little with a knife. It is easier to cover small errors with a special putty.

The situation is very similar with the inner corner of the skirting board. First you try on which side will be on the ceiling, this part is pressed to the bottom with a miter box, the second part is supported on the wall closest to you and cuts as shown in the photo below.

How to make an inner corner of a ceiling plinth with the introduction of a miter box

And again, at first I try it on without applying glue, if necessary, I slightly correct it. Then apply a thin bead of glue to both surfaces that will stick to the wall or ceiling.

Your own version of how to use the miter box correctly is shown in.

With decorative corners

There is one more, simpler way. For skirting boards made of polyurethane or polystyrene, use ready-made, factory decorative corners. They are installed in a corner, strips are glued to them closely. Cutting them if necessary is very simple: a few millimeters with an ordinary clerical knife.

Examples of finished corners for fillets

How to cut ceiling plinth in corners

The quality of the ceiling finish greatly affects the appearance of the room. Then they try to do everything perfectly, or very close to it. The finishing touch to the design is the ceiling plinth. They give the finish a complete and holistic look. The strips themselves are mounted on flat surfaces simply: on special white glue, but problems arise with the design of the corners. Without knowing how to make the corner of the skirting board correctly, a lot of material deteriorates. How and what to cut it in the corners and tell you.

What and how to cut

Working with skirting boards made from different materials means using different cutting tools. When working with a wooden skirting board, it is more convenient to work with a saw on wood. All others, including plastic, made of foam and other polymers, are better cut with a metal sheet. The result is a smoother cut, less burr. Saws are usually used when working with a miter box.

Corner design looks attractive

When working with a polystyrene skirting board without special tools, they cut them with a good office knife. Its blade is quite thin and even, the cut is smooth, wrinkled. If you use a saw with hydro- or polystyrene, do not press hard: you can wrinkle.

In general, in order to get used to the tool and material a little, take some piece and practice on it: cut, saw, trim. So there will be fewer problems when working.

What is it made of and what is it called

The very first skirting boards on the ceiling were made of plaster. They were cast in special molds, then installed in a solution on the ceiling. Such figured ornaments were called fillets. Today you can see them rarely are expensive, and outwardly they almost do not differ from the cheaper options. And the name is almost lost.

The most popular ceiling skirting boards today are made of polyurethane or polystyrene. They are inexpensive, look great, are easy to install, have a wide range of profiles and patterns. The width can be from 5 mm to 250 mm. They are used in almost any room, decorated in any style. The exception is wooden houses with a corresponding interior. Wooden products are most often used here. the style dictates its conditions.

There is also a similar plastic finish. It is mainly installed in bathrooms. But even in damp rooms, you can safely mount polyurethane strips. they are NOT afraid of damp.

You need to cut the ceiling plinth in the corners of any material in one of the ways described below. The only exception is plastic skirting boards: such a corner can be issued only with the introduction of ready-made corners.

How to make a corner of a ceiling plinth without a miter box

Few people in apartments or houses have angles of exactly 90 °. Small deviations are easily corrected after fitting. But not always. Then you have to mark everything “in place”. under the ceiling.

You will need a finely contoured pencil (hard. it is not so visible on the ceiling, but leaves quite clear marks near it), a small piece of plinth, a ruler and a good stationery knife if you work with polyurethane (polystyrene) baguettes or metal dust to work with other materials.

Apply the plinth to the corner, draw along the outer edge with a pencil. Apply to the other side of the corner, also mark. You have a cross on the ceiling, the center of which marks the place where the plinths of the ceiling plinth should converge (look at the photo). I installed a piece of plinth in the corner, which will stick there and resting it with its end on the wall, transfer the mark to it.

How to make corners on skirting boards without using special tools

Now take a ruler and connect the edge of the skirting board with the marked mark. If you just put the plinth on the table and cut along the mowing line, the two parts in the corner will still NOT fold: the inner part will interfere. You can trim it later, try it on the ceiling. The second way is to install a piece that needs to be cut on the table, then a piece that will be on the ceiling. And cut along the mowing line, but keeping the knife at an angle of about 45 °. It will still be necessary to correct, but much less (and less chance of error).

Repeat the same operation with the second bar. Attached to the desired wall, abuts the butt against the adjacent wall, mark the place where the cross is drawn, draw the line and then Cut it off. Correction Carried out “dry” without applying glue.

You repeat exactly the same steps for the outer (protruding) corner. Now you know one more way of how to make a corner of a ceiling plinth, and without a scissor or other special devices.

How to get the correct angle

Most of the problems when working with skirting boards arise when making corners. Since the surface in the products is complex, it will NOT work simply to cut at the desired angle: it is also necessary to cut it so that they dock and, preferably, without large gaps. In reality, there are several ways to make the corner of the skirting board Perfect (or almost).

How to join in corners

If the installation of the first corner is completed, we can assume that you have already learned almost everything. “Almost”, because you still need to learn how to join the corners and cut the planks to length. When some part is already glued and a small distance is left to the corner, how not to be mistaken with the length? The answer is simple: leave stock.

At first, you can cut a piece 10-15 cm longer: it will be possible to redo it several times if something does not work out right away. Then you make the corner in the way described above, try it on dry, adjust everything so that the result suits you. Only then can the already cut bar be attached to the corner and mark the place where it can be shortened. You need to trim at exactly 90 °. It is not necessary to use a miter box. Just try to put the knife (hacksaw) perpendicular to the surface.

Inner corner

• We make the right measurements.
• We install the plinth plinth in the miter box so that this position exactly coincides with the placement on the ceiling.
• The plinth should be firmly pressed against the opposite wall of the miter box. Hold and press with your free hand.
• We put a hacksaw at an angle of 45 ° in a special hole and cut off the part.

• The adjacent part must be cut in the same way, only in a mirror image, as shown in the photo.

The first way is with a miter box

The miter box usually looks like a tray with vertical holes for a hacksaw. It can be made of wood, metal or plastic. This tool is the oldest and simplest carpenter’s tool for cutting wood pieces at 90 ° and 45 °. There are types of such a device for professional work, with a swivel mechanism, in which the cutting tool can be rotated and fixed in any position.

How to cut a ceiling plinth correctly

Ceiling corners are divided into internal and external, the method of joining them is slightly different.

Outside corner

• Measure the length of the plinth from the nearest wall to the outer corner, leave the fishing line on the wrong side with a pencil, indicating the desired length. It should be noted that the edge (its upper part) should extend slightly outward.
• The plinth is moved to the miter box and cut off.
• The adjacent strip also needs to be measured with a margin and cut off in a mirror image to the first part.

Trying on a ceiling plinth: the joining of the parts should be perfectly even. If the result is not achieved and there are irregularities at the joint, you can trim the edges with an ordinary knife to a perfect joint.

Checking the smooth docking

All the nuances are well described:

Method two. no additional tools

For the inner corner, you can use the simplest way of perfect joining. by marking on the ceiling. Another example of how to cut a corner nice and even.

• Apply a fillet to the ceiling, tightly presses its even edge into a corner.
• Draw a line along the long side of the plinth on the ceiling.

• The same action is done with the adjacent part on the other side.

• Mark the point of intersection of lines.

In total, you get an even angle of 45 ° if you draw the line from the point of intersection to the edge of the part. Note that the above method of marking works only at perfectly flat corners.

How to cut the corner of a ceiling plinth straight

A beautiful and neat edging of the ceiling hides the joints of the border with coverings and is an additional element of the room’s decor. But in order for the ceiling plinth to look really beautiful, you need to be able to qualitatively join its corner joints.
How to cut the corners of the ceiling plinth evenly can be found in our article.
Related article: how to properly glue the ceiling plinth with glue and putty.

other methods

With a good eye and accuracy of hand action, you can use a homemade template that resembles an imitation of a miter box. To do this, take a thin board or thick plywood and draw a layout in the form of a horizontal rectangle. Using a protractor, mark 45 ° on the right and left sides of the rectangle. Mowing line lines connecting opposite edges. You can now cut the ceiling plinth using this layout. The actions are simple and similar to the description above in the first option. Only the ceiling parts should NOT be inserted, but put on the drawing and combine the hacksaw with the layout of the layout.

Special accessories for docking