How to trim blinds day night
Horizontal blinds
One of the first thoughts that comes to mind when you want to wash horizontal blinds is to use a wet rag. As a result, this process takes too much time, since it is necessary to wipe each lamella, and besides that, terrible dirty stains remain, which are very noticeable on light models.
Of course, you can rinse the rag several times or change the water in the basin, and then wipe it with a dry napkin. But this is a rather long and tedious process. It is better to choose the method of cleaning the blinds from the list below.
How easy it is to clean blinds?
Unfortunately, there is no single answer to this question, because the process itself and detergents depend on several factors:
Stationery eraser
If the blinds are solid, that is, made of wood, plastic, metal, bamboo, then some dirt can be removed with a regular stationery eraser. You just need to rub it hard.
Life hack for prevention
To prevent dust from settling on the lamellas, they can be treated with a special antistatic agent. But the for such funds are quite high, especially since there is an elementary way to make such an antistatic agent at home.
To do this, mix a cap of fabric softener with the same cap of water. A damp cloth is impregnated with the solution, and then the lamellas are wiped. It will be even more convenient if you put cotton on top of the rubber gloves and smear both sides with your hands.
Do I need to shoot from the window and how to do it?
Of course, you can just wipe the surface of the blinds with a cloth on top, shake off the dust and finish there. But for a better and more efficient part of the lamella, it is necessary to remove.
The most difficult thing to remove is horizontal blinds because you need to find the retainer and get rid of it. It may even require a screwdriver. There are several types of fasteners.
If the blinds are made of hard materials, such as wood, metal or plastic, then you must first push on the brackets, and then pull the entire device down towards you. The lamellas must be kept closed to avoid damage.
As for vertical blinds, the situation here is much simpler, because each lamella is attached to the cornice independently with the help of a plug. It is only necessary to remove the plug, which will allow you to remove the lamella itself.
How to remove slats from vertical blinds, will tell the following
In bathroom
If the soapy sponges cannot cope with the layer of dirt and grease, then you can clean the blinds in the bathroom. But this is allowed only with copies of plastic or metal.
Here you can simply rinse the slats under strong pressure from a tap or shower, or even soak the blinds in a bathtub filled with soapy water for a couple of hours. After that, it is necessary to thoroughly rinse the lamellas again with clean tap water or shower. For faster drying, you can use a hair dryer. After thorough drying, you can return the curtain alternative to the windows.
Still, this method is perfect only for plastic slats. For metal (also called iron) options, this cleaning method can cause rust, so at least they must be thoroughly dried. In addition, the lamella turning mechanisms are lubricated with oil or silicone paste.
Special equipment
Blinds “day-night
- What it is?
- Varieties
- Popular colors
- Dimensions
- How to install?
- How to wash?
- Advantages and disadvantages
- Examples in the interior
Each hostess will confirm that without curtains and curtains, the interior will look uncomfortable and not aesthetically pleasing. Today the market offers a constantly expanding range of roller shutters, blinds, curtains. Curtains are not only a decoration for any part of the apartment, but also serve as a means of protection from sunlight. Practical and functional day / night roller blinds are among the most popular and modern designs. Otherwise they are also called “zebra”.
What it is?
Stylish sunshades of the new generation have managed to gain the trust and love of consumers around the world. Blinds “day-night” is a structure in which two textile fabrics are connected by a roller. Most often these are fabric blinds with alternating stripes of a denser and more transparent texture. When folding or lowering the structure, the strips move relative to each other.
Manufacturers of zebra blinds have taken care of the quality of their products. Seamless thermal technology is used to join strips in fabrics. And a special treatment with Teflon impregnation gives the blinds dust-repellent and antistatic properties. Thanks to their unique design, day / night blinds can control the intensity of light entering the room. In some products, designed to protect from excess light, the degree of density of fabric stripes reaches up to 100%.
Varieties
There are open and closed day / night blinds. Open curtains are suitable for both home interiors and workspaces. The fabric in the structure is wound on an uncovered shaft without being fixed from the sides. As a result, the curtain hangs freely. Horizontal stripes visually enlarge the windows and the room appears more spacious.
The classic version of blinds is easy to maintain and affordable. To prevent sagging of the fabric on the sides of the product, they are supplied with special boxes where the fabric is hidden. The closed-type mechanism has a cassette and mini-cassette design. You can pick up a box made of the same material and texture for making the window frame. This will visually give the impression that the blinds are built into the frame.
Mini-cassette constructions are manufactured as a set for each casement. This is the best option for tilt windows.
On the market, with an abundance of roller blinds, this is one of the most budgetary options for horizontal blinds. Combined products “day-night” (“combo”) consist of two layers of canvases. Dense stripes alternate with more transparent ones. The mechanism of construction of fabric curtains “combo” is designed according to the principle of movement “up and down”. In this process, the transparent stripes are reduced or increased in number, changing the intensity of the lighting in the room. Double curtains can be with automatic or manual control system.
Installation instructions for roller blinds Day Night
Self-installation instructions for roller shutters Day Night
Tools required for installation
Installation on a window sash (opening part)
Install the bracket on the top bar
Pull the line into the mechanism and tie a knot
Install the mechanism into the bracket
Install the rails of the mechanism into the shaft with the cloth
Clip the roller blind into the mechanism
Install end caps
Place the hook on the bracket
Install the roller shutter on the window and snap the hook
Installation in the window opening with screws (blind part)
How to Prevent Light Gaps on Blinds and Shades | Blinds.com
On the bracket, break off the top with a clasp
Slide the bracket onto the bar
Pull the line into the mechanism and tie a knot
Install the mechanism into the bracket
Install the guides into the roller with the cloth
Install the latch with gear
Clip the roller blind into the mechanism
Install end caps
Expose the roller blind evenly, for this you can use the level, then screw it to the frame with self-tapping screws
Fastening of the lower part of the fabric roller blinds Day Night the same for the blind and tear-off parts
Install the plug into the lower pipe, and install the guide rod into the plugs, thread the fishing line through it
Pull the line parallel to the glazing bead and mark
Preparatory stage
At the preparatory stage, you need to perform the simplest steps. In particular, in accordance with the instructions, make sure that absolutely all the necessary parts are present in the kit.
Note that you do not need either a screwdriver or a screwdriver to assemble and install the roll. Installation is carried out using double-sided tape. This option should be considered optimal, since the window profile remains intact.
If you want to assemble a roll yourself, go through the following steps sequentially:
- install plugs in the blinds roll;
- put a plastic profile on the lower cut of the canvas;
- install the designated profile into the corresponding groove on the roll caps;
- put a weighting agent in the formed fold of the canvas;
- fix the weight with plastic stoppers.
How to fix blinds day-night?
Day-night blinds are often called “rolls”. These terms are synonymous with each other. The attractiveness of such a solution lies in the possibility of effective protection of the premises from the scorching rays of the sun. This is especially necessary for those who own real estate, the windows of which are facing the sunny side. In the summer, it will be very difficult day-night without blinds. Instead of burning kilowatt hours on a split system, it makes sense to equip windows with protective structures.
On the website https://sunny-store.com.ua/den-noch.html you can purchase blinds on the most favorable terms. You can even make a purchase online. You can rest assured that you will be able to carry out the installation yourself without additional help. Immediately upon receipt with a complete set.
Assembling the assembled roll on the window
Beforehand, using a cotton pad and alcohol (or any other degreaser), be sure to clean the surface of the bracket where the tape will be glued.
The same applies to the location on the window frame profile.
Alcohol is recommended as a solvent for pollutants due to its rapid evaporation and lack of unpleasant odor (unlike acetone, White Spirit, etc.).
Remember that the roll is held not only on double-sided tape, but on plastic brackets. They are thrown over the end part of the profile and snapped into place until they fully adhere to the surface of the window frame.
If you still have concerns about self-installation, strongly with the video instruction below. It also indicates how to perform installation on a non-swing window sash:
We select tools
In order to cut roller blinds in width yourself, you will need the following tools:
- soap or a special pencil for fabric;
- household scissors or a sharp stationery knife;
- needles, threads;
- tape measure.
If the curtains are too wide, which goes beyond the size of the window, you need to narrow them. Initially, you need to unfold the canvas, after removing the plugs. Please note that the rolls are equipped with special weights, which must also be removed and cut to fit the new window.
How to cut roller blinds to the width yourself
Roller blinds are most often cut in order to change the design of the room, to decorate, to adjust them in accordance with the dimensions of the window openings. This is necessary when you change your place of residence. If initially your window had the same dimensions, and then you moved into another apartment and at the same time you do not want to buy new window structures, you need to know how to cut roller blinds in width yourself.
Anyone can do this in the presence of an ordinary tool, which is at hand for every housewife. In order to get started, you first need to measure the size of the window. To do this, follow these steps:
- Hang the fabric on the cornice above the window.
- Spread out the curtain material, let it hang a little, take the final shape.
- Make accurate measurements and write down the information received.
The length can be reduced in size in a matter of minutes. To do this, simply make a double or triple hem and hide up to 20-30 cm of rolled fabric in this way.
Step by step guide
Use soap and a tape measure to mark the curtain fabric accordingly. Before you cut the roller blinds shaft and bring it to the required length, you need to measure the width of the window, stepping back 2-3 cm from the length of the bracket.
Then you need to install the plugs and cut off the excess part of the rail, which in the end should be equal to the length of the shaft.
The curtains are also marked with soap and a measuring tape. With a sharp clerical knife or ordinary household scissors, the curtain fabric is cut to the width of the bottom of the rail.
Then the material is attached to the shaft. To do this, it must be tightly wound, having previously glued a protective tape with a self-adhesive base. The canvas must be wound carefully and adhere to a strictly horizontal position in relation to the shaft. Avoid the slightest distortions, as in this case all the work will be done in vain.
Fold 5 cm of the blade so that a fold is formed where the shaft with the glued tape will be installed. Do not indent too much, as in this case the shaft will slip and will not be able to firmly lock in the desired position.
Then you need to roll it along the top of the curtain and roll it 3/4 of the length. Install the bottom rail into the hole on the shade. Insert the bracket into the very end of the control mechanism, then insert the other end in the same way. Upon completion of the work, all the parts that secure the system must be assembled, and the roller blind, shortened in width, must be hung in the place designated for it.
As you can see, it will not be difficult to cut the roller blinds to the width yourself. Here the main thing is care and diligence, as well as an hour of free time and the availability of the necessary working tools at hand.
How to cut a roller blind with your own hands?
Roller blinds. one of the most common design options for a window opening. They serve both decorative and practical functions. This compact and stylish sun protection system fits perfectly into almost any room, reliably protects from the sun’s rays, easy to use, easy to operate.
Blinds are a construction of fabric, a rotating shaft and a special mechanism that winds the fabric on a roller. Unlike the blinds, the canvas is solid, and there are no gaps, due to which, when the curtains are lowered, complete darkness in the room is ensured. Compared to the usual curtains, roller blinds are more compact, weigh less, can be rolled up, are easier to clean, since due to special impregnations they do not collect dust and are less dirty.
How to shorten the length
Most often, adjustment of roller blinds along the length is not required, since it is enough just not to unwind the canvas to its full length. But if you are a perfectionist and it is extremely important for you that the blinds are of the right size, then follow these instructions:
- Hang the curtains, lower the canvas, wait for it to fully unfold and lie down neatly, then take measurements.
- Mark where you want to crop the canvas.
- Remove roller blinds, spread them out on a horizontal surface.
- Remove the weight from the bottom edge.
- Add an allowance of 40-50 mm to the measured length to create a new “” for the weight.
- Cut the fabric.
- Place a canvas underneath the curtain and sew a “” for the weighting agent, insert it.
- Hang the curtain on the window.
If the length of the “excess” fabric is not too long, then trimming can be dispensed with. It is enough to make a double fold of the fabric, with which you can hide up to 30 cm of fabric. This option of shortening the roller blind is much easier and faster.
Doesn’t fit the size. How to cut a roller blind with your own hands?
If you cannot find blinds of suitable dimensions in any way and do not want to contact the master for individual tailoring, as it is very expensive, then you can solve this problem on your own by cutting the roller blinds to the required size.
Types and sizes of roller blinds
Manufacturers offer a huge assortment of roller blinds, among which you can choose products of any size and for any window. But still, sometimes there are situations when the roller blinds offered by the seller do not have the right size for your windows. This usually happens if windows of non-standard sizes were laid in the building project, or the dimensional grid of the roller blinds you liked is limited and does not contain a model suitable for you.
In this case, there are two ways out of the situation:
- Order custom tailoring of roller blinds. The most convenient solution to the problem. With minimal effort on your part and without any hassle, you will receive roller blinds that will fully meet your expectations and the dimensions of the window opening. But this method has a significant drawback. high cost of the finished product.
- Buy a sun protection system as close as possible to the desired size, but slightly larger than it, and cut the roller blind yourself. Having decided to do this, you will need to make some effort and spend a little personal time, but the curtains will cost you inexpensively.
The following types of roller blinds are on sale:
Their feature. an open shaft that is not protected by anything. Such blinds are inexpensive, take up little space, and can be mounted above a window opening or on each window sash. Their maximum web width is 1.8 m, height. 2 m.
Roller blinds of this type are equipped with a plastic box that hides the rotating shaft and protects it and the wound fabric from dirt and accidental damage. Another difference between them. small size. The width of the web starts from 0.7 m, the length does not exceed 2.2 m.
Available in lengths up to 4.5 m and widths up to 3.5 m, these roller blinds are perfect for large window openings such as panoramic windows or wide windows in office buildings.
Roof roller blinds are designed to be installed on sloped windows. For a snug fit to them, they are specially equipped with side guides that hold the canvas along the window sashes. Their height. no more than 2 m, width. not less than 0.7 m.
How to cut the roller blind to the width
Cutting roller blinds in width is more difficult and requires more care. Preliminary preparation and measurement is done in the same way as described above. After all measurements are made and the fabric is marked, you can proceed to adjusting the canvas to the desired size. The scheme of work is as follows:
- Lay out the curtains on a flat surface, disassemble into components (take out the shaft and weighting agent) and unfold the fabric.
- Cut the shaft to the required width. Please note that its width should be 8-10 mm wider than the width of the canvas. It is better to cut with a hacksaw. After trimming the edges, be sure to sandpaper or file so that there are no chipping on which the fabric can catch.
- Cut off the weighting agent (it should be 10-15 mm narrower than the roller blinds).
- Assemble the curtain back into a single structure and hang it on the window.
It should be remembered that cutting the roller blinds will immediately void the warranty on them. Therefore, it is worth starting this operation if there are no other options anymore or the guarantee is not too important for you.
How to shorten the roller blind yourself?
In some cases, the roller blinds you purchased may not quite fit your window. For example, if a window of a complex shape, or you initially measured the window opening incorrectly, or if you decided to move the curtains from one window to another.
As you can see, there are different cases. And few people will want to call a master for such a simple procedure as shortening roller blinds.
So let’s figure out how to properly cut roller blinds.
Light roller blinds for the balcony
How to shorten the width of the roller blind yourself
Fortunately, the design of roller blinds is simple, so you can easily shorten them to the desired size at home.
To shorten the curtains, take the following tools: Pencil, ruler, stationery knife or scissors, metal hacksaw (required!), Sandpaper or file.
How to cut roller blinds correctly:
- Lay curtains on a flat surface.
- Unfold the fabric from the roll.
- Remove the weight from the bottom edge of the curtain (you can easily find it at the very bottom).
- Mark exactly how you want to cut the curtain and cut the fabric.
- Cut the shaft to the desired width using a hacksaw or similar tool. Sand the edge of files or emery paper to remove any chipping.
IMPORTANT! The shaft should be 8-10 mm wider than the blade.
How to properly shorten a roller blind in length
This is required much less often, since you can always simply not unwind the curtain to its full length. However, if you are a perfectionist, you can shorten the roller blind to any length you need.
This is much easier to do than shortening the width of the curtain.
Shorten the curtain lengthwise in 6 easy steps:
- We carry out preparation in the same way as for changing the width of the curtain.
- We note how long it is required to shorten the fabric.
- We take out the weighting agent and cut the fabric.
IMPORTANT! Be sure to give an allowance of 40-50 mm to create a new for the weighting agent.
How to properly shorten roller blinds on guides
Such curtains are shortened in the same way as ordinary curtains, with the only difference that they must first be pulled out of the guides that hold the fabric against the glass when the curtains are lowered.
The guides are mounted so that the fabric does not sag during vertical ventilation. Then the curtains cover the sun better, and the window looks neater.
It is very easy to remove the fabric from the guides, as it can deform a little and then regain its shape. You need to be especially careful with rattan and bamboo curtains so as not to damage the edge.
In all other respects, the process of shortening curtains does not differ from what we described above in this article.
Is it possible to cut roller blinds?
- Horizontal aluminum blinds 16 mm
- Horizontal aluminum blinds 25 mm
- Horizontal aluminum blinds 50 mm
- Horizontal cassette blinds Venus 16 and 25 mm
- Horizontal wooden blinds
- Horizontal bamboo blinds
- Horizontal plastic blinds
- Interframe horizontal blinds inside the window
- Classic horizontal blinds 50 mm
- Ladder for horizontal blinds 50 mm
- Automatic horizontal blinds
- Bamboo roller blinds
- Cassette roller blinds
- Roller blinds for plastic windows
- Roller blinds double day-night
- Blackout blackout roller blinds
- Roller blinds with photo printing
- Fabric roller blinds
- Roller blinds Lovolight
- Roller blinds LUX
- Anti-vandal roller shutters
- Garage roller shutters
- Protective roller shutters
- Interior roller shutters
- Mechanical roller shutters
- Outdoor roller shutters
- Roller shutters for balconies and loggias
- Gazebo roller shutters
- Roller shutters for summer cottages
- Roller shutters for attic
- Roller shutters for bathroom
- Roller shutters for trade pavilions and showcases
- Roller shutters for cabinet
- Roller shutters on the doorway
- Roller shutters on the door
- Internal roller shutters
- Roller shutters for windows
- Internal roller shutters
- Plumbing shutters in the bathroom
- Roller shutters with photo printing
- Roller shutters with mosquito net
- Perforated and lattice roller shutters
- Automatic roller shutters
- Garage Doors
- Sliding gates
- Swing gates
- Roller (roller shutter) gates
- Sectional doors
- Spare parts for horizontal blinds
- Spare parts for pleats
- Spare parts for vertical blinds
- Spare parts for roller blinds
- For electric drive
- Spare parts for Roman blinds
- Horizontal aluminum blinds 16 and 25 mm with electric drive
- Pleated blinds with electric drive
- Roller blinds UNI with electric drive
- BENTHIN roller blinds with electric drive
- Roller blinds MINI with electric drive
- Aluminum horizontal blinds 50 mm with electric drive
- Vertical blinds with electric drive
- Horizontal wood and bamboo blinds with electric drive
- Curtains Mirage with electric drive
- Roman blinds with electric drive
- Roller blinds LOUVOLITE with electric drive
But sometimes it becomes necessary to reduce the size of the canvas in length or width:
- for example, if you purchased a finished product that is larger than a window;
- or the canvas is deformed at the edges, but the size of the roller blind allows you to painlessly get rid of a few centimeters of damaged fabric;
- or after the move, it turned out that the blinds do not fit the new windows. If they were previously installed on a wall or ceiling, you can shorten the shaft and attach the product inside the opening.
In such cases, you can cut the roller blind yourself. If you are not sure if you can handle it, it is better to invite a specialist. he will do it quickly and accurately.
How to cut roller blinds to length?
The blade should be trimmed only on a flat surface using a well-sharpened tool (for example, a hacksaw):
- Unfold the roll and remove the weight.
- Measure the right amount of fabric from the bottom edge of the fabric.
- Leave a 4-5 cm allowance for the “” in which the weight will be located, then cut off the excess.
- It remains to sew a “” for the weighting bar, insert it into place, and the curtain is ready.
Shortening roller blinds with guides is carried out in the same way, but first you need to pull the canvas out of them.
How to cut rolls to width?
When trimming roller blinds in width, you need to shorten not only the fabric itself, but also the winding shaft.
- Unwind the fabric roll completely, remove the winding tube and weight.
- Measure the desired width of the blinds, proceed to trimming. In this case, the shaft must be shortened so that it is 8-10 mm wider than the web, and the weighting agent. 10-15 mm shorter than the fabric itself. The shaft is cut with a hacksaw or a file, and the edges are sanded so that no chipping remains.
- After trimming all the elements of the curtain, proceed to reassemble it. In this case, it is very important to evenly attach the fabric to the shaft, otherwise, when winding, the fabric will be skewed.
Shortening the roller blind in length. outlet for perfectionists. You can do it easier: unwind the required amount of fabric, leaving the excess in the roll above the window. Cropping to width may seem like a more complicated process for beginners. In this case, you can ask for help from the specialists of City Blinds.
Roller blinds “Day-Night” in the interior
What is the value of the “Day and Night” system for the interior? Naturally, this is a variety of options for the execution of such curtains. Various shades of alternating stripes, as well as stylish design make it possible to fit the Day-Night roller blinds into almost any interior. You can combine green stripes with transparent, brown with beige. here you need to select the color individually, harmoniously fitting into the created interior of the room.
Roller blinds Day and Night in the interior of the kitchen
Roller blinds Day and Night in the interior
We already know that this system combines the features of conventional curtains and window blinds. So, by adjusting the flow of sunlight with the help of roller blinds, we will completely roll them onto a roller, exposing the window. And in the case of the “Day and Night” system, all the stripes will remain in place, just the dark stripes will be set at the same level, letting in the rays of the sun, but not “exposing” the window completely. And if necessary, you can raise the entire curtain up (as is the case with horizontal blinds) and allow the sun’s rays to sweep the room.
Roller blinds double
Features of roller blinds “Day-Night
What methods of sun protection do you know? Curtains, blinds, roller blinds. And if we tell you that there are roller blinds resembling roller blinds that perfectly protect the house from the sun and, at the same time, fit into any interior, even the most exclusive, would you believe it? And here we are not talking about blinds, metal or plastic, which, in principle, do not add warmth and comfort to the house, they only breathe office spirit. In this article we will talk about roller blinds, but not just about fabric roller blinds (they are also called that way), but about their varieties. roller blinds “Day-Night”.
Distinctive features of the Day-Night roller blind system
Let’s see why such roller blinds are attractive from ordinary ones? Firstly, unlike their older sister (and the “Day and Night” system can actually be considered the younger sister of roller blinds), they consist of two rows of stripes: transparent and opaque, which alternate with each other, and their movement is regulated with a circular shaft attached to the top of the system. A strip of fabric acts as a darkening strip, and the transparent part of such roller blinds is nothing more than a mesh.
Secondly, these fabric roller blinds are more like horizontal blinds rather than curtains. What is the best thing to do with blinds? Correctly, control the penetration of light through the window. With the Day-Night roller blind system, the distance between continuous and non-continuous fabric strips can be adjusted, and this process takes place using a chain mechanism (like in blinds).
Roller blinds day-night
Roller blinds day-night
In the morning, you can push all the dark stripes apart, setting them at the same level relative to each other, thereby letting in a maximum of light into the room. And in the evening, on the contrary, push them all in so that each color stripe on one side is opposite to the transparent one on the other side, and turn the roller blind into a solid one-color canvas that protects from the prying eyes of passers-by.
Roller blinds day-night
Roller blinds day-night
Such a “miracle” of interior fiction is attached to the frame or sash. By the way, with the help of roller blinds “Day and Night” it is possible to close an opening with a width of 0.5 m to 2.4 m, and a height of up to 2.5 m. So you can use it not only as a window protection from the sun, but also for doors, arches and other openings.
Maintenance of the “Day and Night” roller blinds system
In principle, maintenance of double roller blinds is easy, since the fabric strips are impregnated with a special solution that prevents the accumulation of dust and dirt on them. But a few caveats should still be given to the future owners of the “Day and Night” system.
Double roller blinds Day-Night
Like all fabric roller blinds, they should not be soaked for a long time, much less rubbed with a brush or sponge. The use of chlorine and acid free detergents and washing powders is permitted. After washing, they must be immediately rinsed and hung to dry.
Double roller blinds Day-Night in the interior
Choosing Installation Inside or Outside Mount | Zone Interiors
Roller blinds “Day-Night” are a real godsend for your windows and doors. This stylish and practical decoration will delight you at any time of the day.
Installation on hinged brackets made of plastic and metal
It is advisable to choose this installation method when there are opening sashes of the window. The procedure is as follows (instruction):
- Place the hinged structures in the standard brackets. If metal is used, then it is required to bend their petals in advance.
- Remove the protective layer of the tape.
- Attach the bracket to the top of the open sash.
- Further installation work is carried out according to the standard scheme.
Characteristic
Thanks to this design, everyone will be able to define the system to their liking. Here you can use open or cassette type. The first option is characterized by the usual folding of the curtain into a roll and it will be noticeable. In the second version, the product will be in a protective box. The process of installing fabric roller shutters is carried out as a result of drilling the frame or installing on a special foam double-sided tape. If in doubt, read the material here.
The zebra blinds are made from synthetic fabric, which is processed using Teflon impregnation. Such a tool has a dust-repellent, antistatic and antibacterial effect, due to which there is no possibility of the formation of an allergic reaction. The specific gravity of this fabric is 110 g / m2. In the photo. beige curtains day-night:
Types and features of fastening systems
Day-night blinds can be attached to the window surface in several ways:
- Universal fastening system with self-adjusting mechanism. The bottom edge hangs loose and there are no tape guides. This option is fixed to the frame or sash of the window.
- You can use a construction that does not involve drilling. It consists of a box in which the shaft and the web control system are located, and guides. The product is simply glued to the window.
- The open system, consisting of a strip and mounting clips, is fixed to the wall with brackets. Belt adjustment is carried out using a cord.
In addition, there is a compact control system that is fixed to the sash. Guides depart from it, which are completely invisible when the canvas is unfolded.
Variety of designs for Day-Night systems
Design of roller blinds Zebra Day Night can be closed and open.
Closed (cassette) systems are more convenient, but also more expensive. In this case, the shaft is hidden in a plastic or aluminum box, weights are attached to the lower edges of the curtains, and guides are located on the sides of the structure, ensuring a tight fit of the curtain to the window. Thanks to them, when the curtain is closed, the ingress of light is completely excluded, the canvases do not hang out and the whole structure looks very aesthetically pleasing.
Roller blind day-night. photo of the upper part of the closed system
Roller blinds zebra with an open system. a budget option roller blinds Day Night. In this case, the fabric is wound on an uncovered shaft and is not fixed from the sides. As a result, the curtain hangs freely, but it rises and falls without any effort.
Day-night curtain with open system
Advice. In order not to damage the chain, try to raise and lower the roller blinds smoothly, without jerking.
Mini cassette roller blinds are the most compact type of roller blinds with a closed system, fixed on the window sashes. The box hiding the shaft most often visually imitates the material from which the window is made, and it seems that the curtain is built directly into the frame.
Mini cassette roller shutters leave the window sill free and do not “eat up” a single extra centimeter of free space
Both closed and open systems, depending on their size and design idea, can be attached to the ceiling, wall, in the window opening, or directly on the window sashes.
Many people confuse concepts such as roller blinds and pleated Day Night. Pleated. a woven or non-woven material gathered in strict horizontal folds like an accordion, from which pleated curtains are made, is a single continuous fabric. Therefore, they cannot, like blinds, regulate the illumination, they are an independent type of window decor and they cannot be considered one of the modifications of the curtains Day Night.
An example of double pleated blinds day and night, which are often confused with roller blinds
Popular colors for unique sunscreen products
Do not forget that indoor curtains should not only protect from the sun, but also please the eye. To achieve a harmonious combination of decorative design of curtains with the rest of the interior items, it is possible only with the correct selection of the color of the sunscreen.
The main thing to remember is that the shades of the curtains should be supported by several elements from the main decor.
Fixation with tape
For this installation method, it is advisable to perform the following action plan:
- Snap on the attachments needed to glue the brackets.
- Treat the surface of the window profile with a degreasing compound, where the product will be installed.
- Heat the tape with a hair dryer.
- Remove the protective film and stick it to the surface.
- Perform installation work in the same way as in the standard scheme.
It doesn’t matter which installation method you choose, the location of the brackets should be strictly horizontal. Then, during the use of the products, it is possible to avoid distortion of the fabric, and the uncovered section of the chain mechanism will be directed down.
Varieties and installation of curtains
According to the name, they are divided into two types: open and closed. Closed means the presence of special boxes into which the curtains come in. Opened ones, in turn, do not hide, but remain visible. For more information on installing a closed-type roller blind, see this
Before choosing a roller blind, consult with a specialist, which type of these products will suit your window frame (window shape).
Installation of curtains is easy but distinctive. Installation can be carried out anywhere the owner chooses. For example, laconic windows allow you to fix roller shutters to the sash. This installation is very convenient if you have rotary systems. This keeps the window structure intact.
Day-night roller blinds are products that belong to modern developments in the field of sun protection systems. Thanks to their unique design, they combine the advantages of conventional curtains and horizontal blinds. In addition to the fact that the zebra rolls belong to modern design development, they are actively used when decorating the window space.
The structure of the day / night double roller blinds is very simple. But they have some differences from the classic models. Such blinds are two canvases made of fabric, on which there is an alternating change of transparent and translucent stripes. As a result of this process, the movement of these strips is carried out through the fabric, so they change the intensity of illumination and light transmission. Thus, like. they are designed to protect you from excess light.
What are Zebra curtains
With their design, Day-Night resembles ordinary roller blinds, but they consist not of a single, but of a double fabric thrown over the shaft and the same as that of roller shutters and blinds of the chain mechanism. Initially, day night blinds were developed specifically for plastic windows, but today they are also used for wooden window structures.
This is what the Zebra curtains look like on the side.
From the usual for us roll curtains Day Night also differ in that the curtain covering the window is not a continuous canvas, but a series of horizontal transparent and opaque stripes of the same width. The strips are thermally connected to each other. Finished roller blinds are treated with Teflon impregnation, thanks to which they acquire dust-repellent and antistatic properties.
Opaque strips for double roller blinds Day Night are made of natural and synthetic fabrics with a dense texture (most often polyester). Light-transmitting stripes are made of dense mesh, tulle, voile or organza. They can be matte, glossy, metallized, plain and patterned.
Zebra roller blinds (another name for these original striped curtains) simultaneously serve both as a tulle and as a curtain. Their main distinguishing feature is three modes of adjusting the luminous flux:
- It is worth pulling on the chain, the fabric will begin to scroll. When dense stripes overlap the transparent ones, street light will no longer enter the room through the window.
- To look out the window, it is not necessary to raise the entire curtain as a whole, it is enough to slightly shift the stripes. At the same time, the lighting in the room will become soft, as if muted.
- If you scroll the canvas so that the stripes of the same type completely coincide with each other, sunlight will freely enter the room.
The photo shows an illustrative example of how using Zebra roller blinds you can adjust the illumination from night darkness to daylight
By the same principle, there is a change in natural illumination with the help of horizontal blinds. Perhaps that is why such curtains are often called not day night curtains, but roller blinds Day Night. In addition, by winding such curtains on a shaft, they can be either fully raised or lowered to the very window sill. This is their main similarity with roller shutters. Well, and they resemble ordinary curtains in that they are made of textile fabrics of the most diverse colors.
What are day-night roller blinds
- What are Zebra curtains
- Variety of designs for Day-Night systems
- How to care for day / night curtains
- Video “How to choose Roller blinds” Day-Night “
There are many ways to protect windows from the sun: curtains, blinds, roller shutters. They are constantly changing, and their assortment is replenished with new products. Roller blinds Day Night (Zebra blinds, roller blinds). original, ergonomic and stylish new generation sun protection systems. Their construction and design combined the main features characteristic of curtains, blinds, and roller shutters. This feature is the secret of their popularity, because with the help of Day-Night roller shutters, you can create a comfortable lighting mode in the room at any time of the day.
What are Zebra curtains
By their design, fabric roller blinds Day-Night resemble ordinary roller blinds, but they consist not of a single, but a double fabric thrown over the shaft and the same as in roller shutters and blinds of the chain mechanism. Initially, day night blinds were developed specifically for plastic windows, but today they are also used for wooden window structures.
This is what the Zebra curtains look like on the side
From the usual for us roll curtains Day Night also differ in that the curtain covering the window is not a continuous canvas, but a series of horizontal transparent and opaque stripes of the same width. The strips are thermally connected to each other. Finished roller blinds are treated with Teflon impregnation, thanks to which they acquire dust-repellent and antistatic properties.
Opaque strips for double roller blinds Day Night are made of natural and synthetic fabrics with a dense texture (most often polyester). Light-transmitting stripes are made of dense mesh, tulle, voile or organza. They can be matte, glossy, metallized, plain and patterned.
Zebra roller blinds (another name for these original striped curtains) simultaneously serve both as a tulle and as a curtain. Their main distinguishing feature is three modes of adjusting the luminous flux:
- It is worth pulling on the chain, the fabric will begin to scroll. When dense stripes overlap the transparent ones, street light will no longer enter the room through the window.
- To look out the window, it is not necessary to raise the entire curtain as a whole, it is enough to slightly shift the stripes. At the same time, the lighting in the room will become soft, as if muted.
- If you scroll the canvas so that the stripes of the same type completely coincide with each other, sunlight will freely enter the room.
The photo shows an illustrative example of how using Zebra roller blinds you can adjust the illumination from night darkness to daylight
By the same principle, there is a change in natural illumination with the help of horizontal blinds. Perhaps that is why such curtains are often called not day night curtains, but roller blinds Day Night. In addition, by winding such curtains on a shaft, they can be either fully raised or lowered to the very window sill. This is their main similarity with roller shutters. Well, and they resemble ordinary curtains in that they are made of textile fabrics of the most diverse colors.
Variety of designs for Day-Night systems
Design of roller blinds Zebra Day Night can be closed and open.
Closed (cassette) systems are more convenient, but also more expensive. In this case, the shaft is hidden in a plastic or aluminum box, weights are attached to the lower edges of the curtains, and guides are located on the sides of the structure, ensuring a tight fit of the curtain to the window. Thanks to them, when the curtain is closed, the ingress of light is completely excluded, the canvases do not hang out and the whole structure looks very aesthetically pleasing.
Roller blind day-night. photo of the upper part of the closed system
Roller blinds zebra with an open system. a budget option roller blinds Day Night. In this case, the fabric is wound on an uncovered shaft and is not fixed from the sides. As a result, the curtain hangs freely, but it rises and falls without any effort.
Day-night curtain with open system
Advice. In order not to damage the chain, try to raise and lower the roller blinds smoothly, without jerking.
Mini cassette roller blinds are the most compact type of roller blinds with a closed system, fixed on the window sashes. The box hiding the shaft most often visually imitates the material from which the window is made, and it seems that the curtain is built directly into the frame.
Mini cassette roller shutters leave the window sill free and do not “eat up” a single extra centimeter of free space
Both closed and open systems, depending on their size and design idea, can be attached to the ceiling, wall, in the window opening, or directly on the window sashes.
Many people confuse concepts such as roller blinds and pleated Day Night. Pleated. a woven or non-woven material gathered in strict horizontal folds like an accordion, from which pleated curtains are made, is a single continuous fabric. Therefore, they cannot, like blinds, regulate the illumination, they are an independent type of window decor and they cannot be considered one of the modifications of the curtains Day Night.
An example of double pleated blinds day and night, which are often confused with roller blinds
How to care for day / night curtains
- To keep the cloths clean, it is sufficient to dust them off with a dry soft cloth during regular weekly cleaning.
- The vacuum cleaner can damage the fabric or tighten the chains of the lifting mechanism and it is undesirable to use it.
- Clean the curtain day night zebra with a damp cloth only when persistent visible spots appear on it. To dry the fabric faster, it should be completely unwound.
- Use a sponge and a mild soap solution to remove stains. Use it to moisten the dirty place well, leave it that way for a while, and then rinse off the solution with clean water. If the stain persists, repeat this procedure again.
- Aggressive chlorine-containing detergents and abrasive powders should not be used. They can damage the texture and color of the fabric.
Advice. For oversized windows, roller blinds Day Night with a metal frame are best suited. Plastic mounts are not very durable and sag under heavy load.
Day-Night curtains look great in many interiors popular today: modern classics, minimalism, hi-tech, loft. And curtains, curtains, Roman blinds, correctly matched to them in a pair, will help to harmoniously fit them into other interior styles. These unique light protection systems created with the use of advanced technologies will make your home even more functional and comfortable, and will delight you day and night.