Miter saw for what work
Why you need a miter saw for wood: A serious tool in the hands of a craftsman!
Last Updated on 02 February 2021
The use of trimming greatly simplifies the manufacture of wooden products.
Device and principle of operation
The principle of operation of a miter saw, circular and pendulum saws is the same, their differences are only in the design, expressed in the method of use (mobile or stationary), as well as the types of discs used. The main elements of a miter saw for wood are shown in the following figure.
Design and main elements of the product
The work of trimming is carried out as follows:
- when voltage is applied to an electric motor, it begins to rotate, and its rotational motion is transmitted to a mechanical gearbox;
- there is a seat on the gearbox shaft on which the saw blade is installed;
- the disk begins to rotate together with the gearbox shaft after the voltage is applied to the electric motor;
- for safety of use, the saw blade is covered with a protective cover;
- a handle is used to bring it into contact with the workpiece, and a return spring is used to return it to its original state;
- the reliability of fixation on the working surface is ensured by the bed, on which the elements for fixing the workpiece are located (rotary table, stops, insert, etc.);
- turning on and off the device is carried out using the control buttons (not shown in the figure), as well as protective equipment (from jamming and short-circuit current, overheating and other emergencies).
Sawing down molded wooden products using a miter saw significantly increases labor productivity in this operation, especially on the scale of a large construction site
Miter saw manufacturers rating
Miter saws, like other electrical tools, are produced in many countries of the world by all well-known brands operating in this equipment market. In our country, the most popular are:
- From foreign manufacturing companies: “Bosch” (Germany), “Makita” (Japan) and “Metabo” (Germany).
- Domestic: “Zubr” and “Enkor-Corvette”.
Miter saw model “Enkor Corvette-4-430”
For obvious reasons, domestic models are most popular in the budget segment of equipment, and more expensive foreign counterparts in the class of professional tools. Which manufacturers’ models are the most popular is difficult to determine, because they are similar in the main parameters, and the choice of users in this case is based on personal preferences for the brand of the instrument based on previous experience with a particular brand.
Recommendations for the selection of miter saws for metal
Miter saw for metal “Metabo CS 23-355” model
The main selection criteria for saws designed for cutting metal are the same as for analogues that involve working with wooden blanks, but, in addition, it should be remembered that:
- To work with different types of metal, different types of discs are used, therefore, special attention should be paid to their purpose and size of the landing, as well as the outer diameter.
- The wider the metal workpieces are to be processed, the larger the diameter of the saw blade should be.
- The protective cover must completely cover the disc during operation.
- The presence of a limiter on the depth of cut expands the capabilities of the machine.
- A more powerful electric motor has more performance and heats up less during operation.
Applications for handheld and stationary models
A miter saw is an electric hand-held tool designed for sawing and processing a variety of materials (wood, metal and plastic). Depending on the purpose, such equipment is classified as follows: miter and miter-miter, pendulum and circular saw (electric miter box).
A hand-held circular saw differs from a miter saw only in that it does not have a bed with a rotary table, which makes it more mobile, and this is especially important for domestic use.
Miter saws for wood are used for sawing wood blanks, as well as products made from woodworking products (laminate, chipboard, MDF and other board materials). Sawing is carried out at a right or other predetermined angle or inclination, which is necessary in the manufacture of joinery and furniture. In addition, similar equipment is used when performing construction, installation and finishing works.
Using a hand-held circular saw when processing wood balance
Manual models are used on construction sites and at home, and stationary models are used in workshops or workshops of various types of industries. Pendulum saws are used when working with metal, which is necessary in the manufacture of metal structures in various fields of production. Such equipment is installed permanently, and special saw blades are used for work.
How to choose a miter saw
Miter saws differ in technical characteristics and can be of a simple (conventional) or combined type, which somewhat expands their functionality.
The difference between combined models and conventional ones is that their design assumes the possibility of transforming an end saw into a circular one by performing simple movements of the main elements of the saw.
Model “Zubr ZPT-255-1800” with belt drive and broach
In addition, an important functional feature is the presence of a broach, which also expands the capabilities of the equipment used.
Miter saw with broach.
For a stationary installation, it is better to use models that have a broaching function that allows you to process wide wooden blanks.
Universal miter saw “Makita Lh1040” model
Main technical characteristics
For any electric tool and technological equipment, the main indicators of use are the declared technical characteristics. For miter saws, these are:
- Electric power.
One of the important characteristics that determines the performance, the permissible diameter of the saw blades, as well as the overall dimensions and weight. - Spindle speed.
The cleanliness of the cut of the workpiece depends on this parameter. - Used disc diameter.
This characteristic is laid down by the design features of the device, which determine this parameter both by the size of the case and by the power of the electric motor. On household models, as a rule, discs with an outer diameter of 250 mm and a landing one. 30 mm are used; for professional equipment, the outer diameter may be larger. - The kerf depends on the size of the saw blade, due to the design of a particular model
- Cutting parameters.
This indicator depends on the diameter of the saw blade, as well as the presence of a broaching function that allows you to process wide workpieces, which is achieved by the presence of a special stand and a disc feed mechanism along the mowing line of the cut. - engine’s type.
Equipment of this type is completed with two types of electric motors (asynchronous and collector), differing in the frequency of maintenance and warranty periods of operation. - Transfer type.
The considered devices can be equipped with a gear or belt drive. The second option is used on permanently installed models and has a low noise level, but requires control of the belt tension. The gear train is reliable in use and eliminates the possibility of slipping during operation, but it has an increased level of noise and the possibility of vibration. - Rotary system parameters.
These characteristics are determined by the capabilities of the rotary table and the stops available on it. - Security systems.
Safety systems on such devices ensure the shutdown of the electric motor in case of overheating or jamming of the saw blade, provide smooth start-up and blocking when replacing the blade, as well as protection against short-circuit currents and rigid fixation of the workpieces being processed. - Additional options.
In this category, functions such as illumination of the working area and a laser pointer, limiting the cutting depth and maintaining the set speed of the saw blade under load can be offered.
The higher the electrical power, the greater the weight of the miter saw, as well as its cost.
The presence of a laser pointer simplifies the implementation of the intended operations
What is a feed-through miter saw for??
The main task of the tool is to make an accurate straight or angular cut. The possibilities of using a miter saw with a broach are not limited, but it is more often used in finishing, furniture production and installing interior doors. Popular jobs that require the use of a carpentry saw with a broach:
- laying skirting boards and baguettes;
- the use of wooden blocks;
- use of lining.
Do-it-yourself miter saw with broach
Buying a quality tool will hurt your budget. A miter saw with a broach for metal and wood can be made by hand. This will require the use of a hand-held circular saw. Complete algorithm of actions:
- The body of the unit is made of plywood or iron. It consists of a vertical stand and a horizontal base.
- A pendulum-type device is made from the board and bolted to the base.
- A metal corner is installed on top of the pendulum so that the end of the latter sticks out slightly.
- They take a metal spring and attach it with one end to the upright post, and the other to the rear shelf of the corner.
- The tension force of the spring is selected empirically, so that the hand saw is kept suspended.
- The handle is removed from the tool and fixed in the pendulum mechanism in the previously made hole.
- Electric wires are connected to the installation and connected to a power source.
A miter saw with a broach. what is it, a device, what is it for, how to choose?
Carpentry work involves cutting various workpieces. In this case, all actions must be carried out with accuracy, observing a certain angle of inclination. A miter saw with a broach allows you to cope with this task.
Miter saw device with broach
Such a device has three main elements: a disc, a motor and a switching mechanism. Models may vary slightly in terms of configuration. Some of them are equipped with a collector motor, and others with an asynchronous motor. The first type of motors works better, but wears out quickly. An asynchronous motor lasts a long time, but it has a lower performance and is more expensive than a collector motor.
Attach the base of the saw on wood with a broach to the table. To increase productivity, you can fix on two planks in parallel. The latter method of fastening provides a more free operation of the disc. The set for the saw comes with a frame. a round base, which is movable, but it is made of aluminum compounds.
Which is the best miter saw with or without feed?
It all depends on the purpose for which the technique is used. The Combi Feed Miter Saw is the optimum technique for industrial work. It is preferable to install it in enterprises and private workshops where work is carried out with a large number of thick sheets. The broach miter saw is better than a conventional miter saw to cut workpieces. It is easier to handle materials containing synthetic components.
For a novice master for household needs, it is better to choose a conventional miter saw. With its help, you can cut small workpieces with high quality. A standard tool does not require special fixtures. All you need is a carpentry table. The technique takes up less space in the workshop and is much cheaper than the one with trimming.
What is a Feed Through Miter Saw?
The device is not universal as it is designed for corner cuts. The broach miter saw is also called a pendulum miter saw. The main feature of the mechanism is the presence of a rotary module. It makes cutting material easier and more accurate. Stationary models can handle boards, bars and slats with high precision. Less commonly, the tool is used when working with slabs, laminate and MDF.
How to Choose a Feed Through Miter Saw?
Manufacturers offer a wide range of construction tools, so it is difficult to answer the question of which broach miter saw to choose. A number of parameters must be taken into account:
- Security. It is important that the equipment is equipped with a blocking function that protects against unwanted start-up.
- Weight and size. For convenient work, it is better to give preference to small models that are comfortable to hold in your hands. Especially if the work is done at a high altitude.
- Cutting depth of products. For high-quality work, miter saws with a disc diameter of 20 cm or more are suitable.
- Power. For domestic purposes, saws with a capacity of 1.6 kW are suitable. To perform professional work, choose equipment with a capacity of at least 1.8 kW.
Miter saws Makita (Makita)
Miter Saw Makita (Makita)
The Makita Miter Saw is one of the most sought after tools among builders, carpenters and fitters. The Makita miter saw belongs to the category of stationary power tools. It is used if you need to cut down wooden or aluminum parts accurately, accurately, with minimal errors. In this case, the saw can be done at the required angle, in the transverse or longitudinal direction.
In the process of repair work, it is often necessary to cut the elements at some angle. These can be door frames, plinths, window sills, cornices, boards, decorative details. At the same time, the drink must be of high quality. smooth and accurate. For such work, the Makita miter saw is used. one of the varieties of circular saws. Any user prefers to use an inexpensive, but reliable and unpretentious tool in their activities.
Miter saw Makita (Makita). quality and reliability
An example of such a technique is the Makita ls 1040 miter saw. Due to its low price and good quality, this model has become one of the most popular in the Makita range of saws. This is a great option for those who work in small workshops or in the country. The Makita ls 1040 saw cannot replace a full-fledged woodworking machine, but it can cope with the usual work of cross-cutting materials at the highest level. you will certainly be satisfied with the work of this tool.
The range of Makita saws is rich: it includes not only such democratic models as the Makita ls 1040, but also other tools with advanced functions. For example, the Makita LH1040 and LF1000 saws differ from their counterparts in that they can be used to saw parts both in the transverse and longitudinal directions. As mentioned above, a modern miter saw, including a Makita (Makita) saw, can be used in wood and aluminum. You just need to take into account that you need special discs to cut aluminum blanks. Makita is known as a supplier of high quality, reliable construction and renovation equipment. Saw Makita, in particular. Makita miter saw is no exception, because it has a full set of valuable consumer qualities.
Miter saw DeWALT DWS 780
Miter saw DWS 780 is suitable for sawing wood, plastic and aluminum.
Miter Saw Types and Benefits
Trimming. as professionals call the device. has a simple design, so everyone can work with it. Main working elements. disc and motor, frame.
Saws are produced in the following types:
- pendulum,
- combined,
- with broach.
The simplest models are pendulum, the latest modifications of which are equipped with a work table with the option of horizontal rotation.
Combined models make a cut with a minimum width and at an angle, rotate both horizontally and vertically, which expands the functionality. They can be used to process parts larger than the saw blade. But you won’t be able to cut wide workpieces on such a tool.
Broached models are so called because of the horizontal movement option. Able to process parts at right angles with increased kerf. The disc moves from multiple directions.
According to the type of use, the saws are divided into:
- mobile,
- stationary.
For domestic use, lighter mobile saw models are rented, and stationary ones are used for metal work. Such devices are installed on a special site where workpieces are processed.
The disc plays an important role in the processing of materials with a miter saw. Discs come in a variety of configurations and differ in diameter, bore and number of teeth. For processing soft wood, plywood takes discs with a small number of teeth, for cutting wood, plastic and composite materials. trapezoidal. The finest and cleanest work is done with combined discs, and carbide-tipped options are used for hardwood.
It should be noted that tools are produced for working on several materials or only one at a time. You need to choose a model according to the width of the cut, according to the angle of inclination of the disc and other parameters.
Miter saw Elitech PT 2030KRS
Designed for stationary precision cutting of wood and wood-derived materials of any length and any shape at a given cutting angle.
Sawing machine Elitech CP 1825R
Designed for longitudinal or transverse, oblique, oblique and combined sawing of workpieces from soft and hard wood species.
Miter saws for rent
Miter saw Elitech PT 1625
Designed for stationary precision cutting of wood and wood-derived materials of any length and any shape.
Miter saw BOSCH GCM 10 Professional
The miter saw is suitable for sawing wood and aluminum.
Trimmer rental with delivery at a bargain price
On the website of our company, a range of equipment is presented, which we offer to rent for a period of one day or more. If more time is required to complete the work, the amount of the fee will be reduced. We will deliver the saw with the necessary consumables at the specified time.
You can order a miter saw for rent or hire by calling 7 (495) 222-65-85
Sliding miter saws
- Own dust collection system. work without a vacuum cleaner!
Power: 1800 W
Disc diameter: 254 mm
Max width of a cut at an angle of 90 °: 305 mm
Max depth of cut at an angle of 90 °: 90 mm
Backlight: yes
Laser presence: yes
Power: 1900 W
Disc diameter: 255mm
Max width of a cut at an angle of 90 °: 300 mm
Max depth of cut at an angle of 90 °: 72 mm
Backlighting: no
Laser presence: yes
- Illumination and laser pointer for maximum precision
Power: 2200 W
Disc diameter: 305 mm
Max width of a cut at an angle of 90 °: 300 mm
Max depth of cut at an angle of 90 °: 110 mm
Backlight: yes
Laser presence: yes
- Clean operation. built-in dust extraction system collects 80% of sawdust
Power: 1400 W
Disc diameter: 216 mm
Max width of a cut at an angle of 90 °: 305 mm
Max depth of cut at an angle of 90 °: 65 mm
Backlight: yes
Laser presence: yes
- Work area illumination and laser pointer for precise work
Power: 2000 W
Disc diameter: 254 mm
Max width of a cut at an angle of 90 °: 300 mm
Max depth of cut at an angle of 90 °: 90 mm
Backlight: yes
Laser presence: yes
- Laser pointer for precise cuts on the intended mowing line
Power: 1500 W
Disc diameter: 210mm
Max width of a cut at an angle of 90 °: 310 mm
Max depth of cut at an angle of 90 °: 62 mm
Backlighting: no
Laser presence: yes
Power: 1800 W
Disc diameter: 255mm
Max width of a cut at an angle of 90 °: 300 mm
Max depth of cut at an angle of 90 °: 72 mm
Backlighting: no
Laser presence: yes
- Laser pointer for precision work
Power: 1500 W
Disc diameter: 216 mm
Max width of a cut at an angle of 90 °: 270 mm
Max depth of cut at an angle of 90 °: 70 mm
Backlight: yes
Laser presence: yes
- Laser pointer for precise cutting
Power: 1800 W
Quick and Easy Miter Saw Station Workbench // Woodworking DIY Project
Disc diameter: 254 mm
Max width of a cut at an angle of 90 °: 430 mm
Max depth of cut at an angle of 90 °: 75 mm
Backlighting: no
Laser presence: yes
- Laser pointer for precise cuts on the intended mowing line
Power: 1800 W
Disc diameter: 254 mm
Max width of a cut at an angle of 90 °: 280 mm
Max depth of cut at an angle of 90 °: 90 mm
Backlighting: no
Laser presence: yes
- Front-mounted rails for confined spaces
Power: 1500 W
Disc diameter: 305 mm
Max width of a cut at an angle of 90 °: 310 mm
Max depth of cut at an angle of 90 °: 102 mm
Backlighting: no
Laser presence: yes
- Laser pointer ensures precise cuts
Power: 1800 W
Disc diameter: 255mm
Max width of a cut at an angle of 90 °: 305 mm
Max depth of cut at an angle of 90 °: 75 mm
Backlighting: no
Laser presence: yes
Power: 1800 W
Disc diameter: 255mm
Max width of a cut at an angle of 90 °: 430 mm
Max depth of cut at an angle of 90 °: 75 mm
Backlighting: no
Laser presence: yes
Power: 1700 W
Disc diameter: 216 mm
Max width of a cut at an angle of 90 °: 305 mm
Max depth of cut at an angle of 90 °: 65 mm
Backlight: yes
Laser presence: yes
Power: 2000 W
Disc diameter: 254 mm
Max depth of cut at an angle of 90 °: 90 mm
Backlighting: no
Laser presence: yes
Power: 1800 W
Disc diameter: 216 mm
Max width of a cut at an angle of 90 °: 305 mm
Max depth of cut at an angle of 90 °: 72 mm
Backlight: yes
Laser presence: yes
Power: 1400 W
Disc diameter: 216 mm
Max width of a cut at an angle of 90 °: 270 mm
Max depth of cut at an angle of 90 °: 70 mm
Backlighting: no
Laser presence: no
Power: 1600 W
Disc diameter: 216 mm
Max width of a cut at an angle of 90 °: 312 mm
Max depth of cut at an angle of 90 °: 70 mm
Backlighting: no
Laser presence: yes
Power: 1700 W
Disc diameter: 305 mm
Max width of a cut at an angle of 90 °: 335 mm
Max depth of cut at an angle of 90 °: 105 mm
Backlighting: no
Laser presence: no
Power: 1800 W
Disc diameter: 254 mm
How to choose a miter saw
Max width of a cut at an angle of 90 °: 305 mm
Max depth of cut at an angle of 90 °: 90 mm
Backlighting: no
Laser presence: yes
The miter saw with a feed has a distinctive feature: the working head with the saw blade is placed on two parallel rails and therefore freely moves horizontally back and forth.
The design of the saw made it possible to saw large workpieces. up to 430 mm at an angle of 90 °, and the related field of application: woodworking and furniture production for the manufacture of doors and door frames, skirting boards, parquet.
Sliding miter saws: equipment features
- The built-in U-shaped stop expands the working table and serves to securely hold oversized workpieces. A large part is additionally fixed with a clamp.
- The laser pointer is increasingly used in equipment to clearly mark the line of the cut for the most accurate work.
- Spindle lock function enables safe disc replacement.
- The possibility of connecting a vacuum cleaner allows you to keep the workplace clean. sawdust does not cover the cutting line and does not penetrate the operator’s respiratory tract. Some models are equipped with dust bags.
- A protective cover is included in the equipment package. It covers the working area of the tool, thus avoiding accidental injury to the operator.
Miter saws
When it is necessary to cut materials such as wood, metal, plastic or even laminate, a miter saw will come to the rescue, a tool that is absolutely indispensable during construction, installation, carpentry or finishing work. The miter cut is truly versatile. it can work with a variety of materials, you just need to choose the right saw blade.
Today, there are several types of miter saws on the power tool market. All saws are very similar in structure: saw blade, handle, control button and, of course, the engine. This is where the fundamental differences begin. after all, there are two types of motors in miter saws. Asynchronous motors have more advantages. they are easier to care for and less noise. Collector motors are very noisy during operation and need a constant change of collector brushes, but they also have higher torque.
End plates also differ functionally: some can only cut straight or at an angle, and some can easily cope with both tasks at the same time.
Nuances when choosing: what to look for
Wood Miter Saw. What Should It Look Like? What to look for when choosing a model for frequent use?
- Saw blade, its diameter, table shape and saw design. It is these parameters that determine the capabilities of the miter saw in practice.
- Saw power. The power of the electric motor helps you choose a device for a given amount of work.
- Possibility of tilting to one side. Models with an inclination in both directions can be safely purchased for frequent use and work with a large amount of material. They are practical and convenient, suitable for sawing any part. At the same time, models with a turn to one side are somewhat limited in work.
- The presence of a rim drive or helical gearbox is responsible for the reliability of operation and the accuracy of cutting. Therefore, such models are bought for large-scale work with various kinds of blanks.
Characteristics and features of miter saws
Trimming is used where it is necessary to cut at a given angle. Similar work is performed by other saws, as well as a jigsaw, and even a hand saw. But where it is necessary to make a cut extremely accurately and accurately, especially with the mass production of identical parts, trimming is indispensable.
It is often also called a “miter saw”, for the reason that the expression “cut on the mustache” by the joiners means sawing at a given angle.
Expert of the category “Construction equipment”
Applications
The advantages of this class of instruments are their compactness, portability and accuracy. This saw is used when working with wood, plastic and aluminum profiles. Since the perfect joining of elements is very important for the beautiful appearance of furniture, as well as doors and window frames, miter saws are most often used in the furniture industry.
They are also relevant for any woodworking. They can also be seen at the baguette production, two in the process of trimming the ends of complex aluminum structures. In general, wherever there is a need for precise cutting of parts at any angle, convenient and functional trimming is used. For household chores, they always take devices of a simpler design and smaller dimensions. But they will also help to quickly sheathe the wall with clapboard, install windows and doors, carefully lay parquet, laminate.
Structural features
Crosscutting is practically a circular saw. It has a not too complicated design. it consists of two working units: a cutting part and an electric drive. In general, this is a frame to which the cutting head of a device with a saw blade is hinged. The mount differs in that it is pendulum. The cutting disc swings like a rocker, allowing you to set the desired angle in the horizontal plane, as well as the required tilt in the vertical plane. The types of miter saws are quite different, they differ in functions and capabilities that greatly facilitate the work of a joiner, furniture maker and builder.
Features and Capabilities
The practical capabilities of the miter saw include:
- Table rotation mechanism. The rotation of the work table is responsible for setting the cutting angle. The limit value may differ depending on the model and manufacturer. Standard rotation angle. 45 degrees. But there are saws that can rotate up to 62 degrees, and this allows you to work even with the most complex curly materials;
- Inclined cut. Cutting the material at any angle in the vertical plane is a functional feature of each trimming. It is she who contributes to the fact that trimming has become one of the most demanded tools. To reduce the cost of construction, budget models have been developed with an inclination only in one direction, which slightly limits the functionality and this, in principle, is enough for small household chores or repairs. But, as a rule, professionals acquire trimming with an inclination in both directions (right-left). This greatly expands the capabilities of the machine and there is no need to twist the workpiece in different directions in the process. An inclined cut in such devices is available within 45-47 degrees;
- Broach function (radial-cantilever). The miter saw motor is installed on special guides, which allows you to move across the workpiece itself and enable cutting along a length of up to 340 mm. This is about twice that of conventional miter saws;
- The presence of a top table. The upper table transforms the tool into a versatile tool. Longitudinal and transverse cutting of the bars is performed on it. You get two functions. facing and sawing. It is very convenient for small workshops where it is impossible to place two machines or for an installation, when it is not convenient to take two machines at the same time;
- The presence of a laser. The laser miter saw is handy for complex plywood workpieces where high precision is required. The glowing laser beam indicates the line to be cut;
- The presence of a belt drive. This type of gearbox allows you to achieve a high level of cutting accuracy and minimizes backlash. This type practically does not fail and is characterized by ease of use;
- Cutting line lighting. Practical and convenient illumination of the working area is essential for maximum precision. This parameter helps to achieve a neat cut at any angle;
- Dust removal function. Most models have a dust removal function, but it’s worth noting that it cleans about 70%. Therefore, experienced builders recommend using special construction vacuum cleaners;
- Reliable and sophisticated electronics help to achieve maximum cutting accuracy by showing the angles of turns and tilts. The digital display shows the exact angle of rotation and angle of inclination in degrees. But the electronics do not affect the stabilization of the device (this function is available only for some models of certain brands).
Popular trimmer manufacturers
Finally, I will introduce you to a few of the most popular manufacturers of trimmings in order to understand how they earned their popularity among consumers.
Einhell. popular German brand with excellent workmanship and materials. A striking example. saw Einhell TC-SM 2131 Dual. The model is distinguished by its ease of use and high cutting accuracy. It is comfortable and versatile, and the slopes to both sides and the presence of a chip bag simplify the work process. The advantages are also workpiece support stops, a laser module, a well-thought-out ruler scale and a clamp with which fixation is carried out.
Metabo is also a German manufacturer. The Metabo KGS 216 M pulling miter saw is functional and reliable. This is a versatile and practical device that copes with the task in the shortest possible time. The advantages of the model are ease of transportation, fast and reliable fixation of workpieces, convenient table extensions, high vertical stop, 36 months warranty.
There is no need to advertise the Japanese brand Makita. Her technique is always very high quality and durable. The Makita MLS100 table miter saw meets all the hopes of joiners and furniture makers. This is a robust construction that is often used for cutting a variety of materials. The advantages of the model are the function of adjusting the cutting depth, the ability to connect a vacuum cleaner, as well as stopping the engine when overloaded.
Shepach is a German company that has long conquered the hearts of Ukrainians with excellent quality equipment. The Scheppach HM 100 lxu miter saw is a combination model with a high performance level. Its advantages are the perfect balance of each element. The engine runs at low noise levels, vibration of the cutting unit is almost completely absorbed by the clutch.
Miter saw table DeWALT DW713. the English model, which is characterized by productivity and compactness. It can often be found on production or construction sites. Its main feature. this is a soft start and instant engine shutdown.
Fox company presented its miter saw with Fox F36-257DB broach on the Ukrainian market. I have already spoken about the benefits of the traction function above. This model can be successfully used for facing dimensional workpieces, and the engine power is quite enough for working with hard wood and all sorts of soft metals (in particular, aluminum).
The Utool UMS-12L miter saw is characterized by a low price, but at the same time. very worthy parameters. The cross cutter can cut a tall workpiece over 100 mm and has a belt drive. Disc change is quick and safe thanks to the spindle lock.