The procedure for assembling the rotary mowing Viraks. Homemade rotary mowel from improvised materials

Assembly of the rotary mowing virax

Wirax mower (Polish assembly) is attached by hanging the tractor’s rear thrust, which are included in the attachment system. Performing mowing elements of the mower lay mowed grass in a roll. Thanks to this, the farmer does not spend extra time to collect mowed grass, it is already conveniently laid for further processing. An additional element protective casing, which is included in the equipment set. Thanks to the innovative selection of materials for the manufacture of the main nodes of the braid, the equipment has a long operational period. It is this parameter that is very valuable to domestic farmers.

The width of the beveled strip in this model can be: 1.35, 1.65, 1.85, 2.1 meters;

Equipment performance is 1.6 ha/hour;

developed speed in the process of work 10-15 km/h;

Wirax mower (Polish assembly) is attached by hanging the tractor’s rear thrust, which are included in the attachment system. Performing mowing elements of the mower lay mowed grass in a roll. Thanks to this, the farmer does not spend extra time to collect mowed grass, it is already conveniently laid for further processing. An additional element protective casing, which is included in the equipment set. Thanks to the innovative selection of materials for the manufacture of the main nodes of the braid, the equipment has a long operational period. It is this parameter that is very valuable to domestic farmers.

The device of the viral mowels

The frame is made of pipes (steel), sheets and strong profiles. It forms a node, which is further used to place the device on the tractor mechanism of the three.point plan. The frame also has a special two.play axis that activates the working mode of the mower and allows it to successfully maneuver even on an uneven land plot.

The beam is also made using steel pipes. She hingely mights the basic frame with a frame of a hinged device. In addition to the specified, the object is used to attach the drive unit.

The main frame looks like a box created from profiles, pipes and steel sheets. It contains a conical gearbox that transfers the drive from the cardan shaft through the middle shaft and the wedge.rephid transmission to the drum with knives.

Drums look like steel disks with knives fixed on them. These discs rotate in different directions, and the blades of the knives themselves are highly acute and resistant to various negative factors.

Wirax z069/2 operating instructions

The fuse is triggered thanks to a special spring. Such a part allows you to protect the mower from possible damage due to collision on rather large obstacles.

Many users of rotary mowers of the Polish assembly in practice were convinced of a serious approach of specialists to their work, because the objects serve for more than one year and have a qualitatively perform work even in difficult conditions.

In order to understand the differences in the considered models more clearly, you should familiarize yourself with the underwater table, which indicates all the features of the technical characteristics of the Viraks braids.

General description and technical characteristics

Technical characteristic is presented in table 1.

After the assigned service life or storage period, the braid should be removed, investigated by a qualified specialist or in a repair workshop and a decision should be made to send it for repair, or for disposal, or for verification. to establish new assigned deadlines. 2.one. Silents are designed to mow natural and seeded herbs in all climatic regions of the country with laying beveled masses in the worship. CS: GO-F-2,1B mitch is recommended for work in plain areas. 2.2. CS: GO-F-2,1B mower consists of:

• cutter;
• connecting rod;
• traction bar;
• drive frames;
• hydraulic cylinder;
• balancing mechanism;
• cardan gear;
• Sprengel.

2.2.one. The cutting device will be cut to cut the grass. The main parts of the cutting apparatus:

• Kzzn knife.08.040
• Finger timing KNB-722V
• Knm shoes.08.020; KNNM.08.030
• Fingers of KNMM.08.010
• KNOM friction plates.08.405; KNNM.08.402
• Clutch KNNM.08.401; KNNM.08.403
• Knem knife head cover. 08.406
• KGN-503A knife guide
• soles K-5014g; K5-2
• K-60343 fuse
• The contradictory plate n.066.56; N.066.52

During the operation of the mower, the cutting device glides on the ground on the inner and outer shoes (3), under which steel soles are located (9); employees for installing the cutting apparatus to a different cut height.

The front (8) and rear (7) guides of the knife heads, as well as a detachment of the rod (10) are strengthened on the inner shoe. The field board is mounted to the outer shoe. 27 fingers (4) with contradictory plates (9) are attached to the finger beam (2) with a hidden head (9).

The knife consists of segments (1), backs (2) and a knife head (3), which serves to join the knife to the connecting rod, and moves in the grooves of the fingers. The back of the cooking and segments it lies on the friction plates (5), the front part on the contradictory plate (11)

During operation, the knife goes back to the finger beam and the back is pressed against the friction plates. For a tight fit of the segments of the knife to the contradictory plates of the fingers to the finger beam, presses are attached (6). 2.2.2. The traction rod (2) serves to connect the cutting device with the mowing frame. With the help of a bracket (1) it is fixed jointly on an axis pressed into a frame. At the second end of the rod, a hinge (3), mounted on it with a nut with a corrugated washer and a corrugated sector, is mounted on it through the bracket welded to the bar.

The corrugated sector is hooked by the side protrudes by the bracket, and the puck with its reefs is included in the reefs of the sector.

Bracket and corrugated sector have oblong holes. An eccentric sleeve is inserted into the hole of the hinged hinge in front (4), fastened with a bolt hinge.

The hinge (3) connects to the internal shoe of the cutting apparatus with pins. The adapter of the hinge (5) serves to connect the traction bar with the hydraulic cylinder of the lifting of the cutting apparatus. 2.2.3. The connecting rod connecting the knife of the cutting apparatus with an eccentric drive, is a rod with a rolled connecting rod head on one side and on the other hand welded to the rod head with a self.supporting bearing N 1680205. In order to avoid friction of this head and the end of the rod on the eccentric drive, a distance washer is installed on the finger of the eccentric, 10 or 5 mm thick, depending on the length of the finger.

The nut serves to prevent the head of self.response. 2.2.four. The drive frame is designed to join the braid to the hinged device of the tractor and convert the rotational movement of the VPM into the reciprocating movement of the connecting rod. All mowing mechanisms are mounted on the welded frame. Using the axis, it joins the longitudinal rods of the tractor’s hinged device and with the help of the finger. to the central traction of the tractor.

The axis for the bracket of the traction rod and the axis for the Sprengel are welded into the frame, and the rod is attached to the transport.

On the bracket of the leading pulley (1). The connected axis with the frame, the VPM (2) with the leading pulley (3) (333 2 threads 2) is installed on two bearings. The drive box consists of a case (1) and a shaft (2) mounted on two bearings, a pulley (3) and an eccentric (4) with a finger pressed into it. The eccentric serves to convert the rotational movement of the shaft into the reciprocating movement of the connecting rod and balance that arise from the mass of the connecting rod and the knife of the inertial forces. The eccentric is protected by the pallet, and the cuneiform transmission with a protective casing. Used belts b (c) 1120.

Segment mower for a walk.behind tractor. area of ​​application

Segmented mower on a single tractor is one of the simplest equipment options. Its design consists of a frame on which 2 bars are installed. The cutting elements are placed between them. In the process of performing progressive movements directly from the drive of the used motoblock, the cutting elements of the mowing begin to move like scissors, thus cutting the grass. At the same time, one of the segments is constantly moving to the right and left, and the second is in a stationary state. When the grass gets between the fingers of the braid, its stems are quickly and evenly cut off. This kind of design allows a segment mower to work successfully in areas with a complex relief.

The entire device is held on the support wheels, and can be attached to the front or rear of the walk.behind tractor. On the edges of the structure are slide, designed to adjust the height of the mowing of vegetation.

The segment mower does not differ in modest dimensions, which does not allow you to effectively use it in areas with a large territory. Nevertheless, the adaptation of this type successfully copes with the mowing of weeds with high and thick stems, which allows you to use it for mowing dry grass. Thanks to this, the segmented haying carpet for a walk.behind tractor is quite high in demand among farmers who own cattle.

The main advantages of the segmented mower are ease of operation, the lack of the need for frequent repair, as well as a low cost. Among the minuses of the equipment, low performance and low efficiency in areas with low grass are highlighted.

Best Available at Available Price

Bomet, Wirax, Promar, Demarol, Ekiw are the best companies from Poland, which offer consumers at a favorable price to attachment equipment and spare parts for the highest quality. Without even making a segment analysis of the hitch market, according to customer reviews, it is possible to determine that the products of Polish production are new generation agricultural technology, which is highly popular. It is designed to reduce the time to carry out all kinds of field and summer cottage work, improve the quality of their implementation and reduce losses.

The variety of brands and types of Polish.made hinges enables even the most sophisticated consumers to make the right choice in the abstract of their tasks and requirements. By purchasing hinged equipment produced in Poland, the consumer may hope to receive goods of high performance and excellent technical characteristics. Any agricultural machinery of Polish production is a practical and durable unit that guarantees high.quality and comfortable work on a country or farm.

Choose the appropriate attitude in parameters and costs to maximize its resource and ensure quick payback, you can from official dealers representing Polish companies in only cooperating with them, you can count on full.fledged consulting and service support, as well as the availability of consumables, spare parts in retail outlets and representative offices. To familiarize yourself with the assortment and make an order for attachments or spare parts for it on the company’s website, which directly cooperates with suppliers of such products.

Principle of operation

The operation of rotary braids is based on the principle of mowing grass, by launching the unit in motion on which the mower is installed. The description is very schematic, but the principle of operation of the rotary mowing is not very complicated. But this simplicity is false, because the results that it shows is truly amazing with the quality and scale of performance.

This type of technology is very popular among farmers, because it allows you to process many hectares of the area, mating various herbal surface. Here I would like to mention a mower for high grass and uneven areas, which will delight you with a high.quality haircut of the lawn.

Depending on the configuration, the rotary braid can be hinged, semi.waist or trailer. Each design option has its advantages and disadvantages, depending on what purposes you are going to use it and which area to process.

Principle of operation

The rotary mowing is included in the package of:

• cardan shaft;
• cutting knives;
• several disks;
• frame consisting of metal beams;
• wheel system;
• Knife replacement key.

As we see, the design is quite simple, which greatly simplifies its possible repair and operation. Spare parts for a Polish rotary mower can be freely purchased in specialized stores, moreover, the price of them will be adequate to our time. However, you can assemble a homemade rotary mower from the rear axle, which will cost you even cheaper.

The correctly selected proportion of gasoline and oil for the chainsaw is a determining factor in the life of the instrument service.

For those who are confident in their abilities, we offer to follow the link // MachinSpec.COM/Leszagotovitelnaya/Benzopila/Kak-NATOCHIT-SEP.html and find out how to sharpen a chain of chainships with your own hands.

KAMAZ 4308 operating manual, which you can find here, can significantly reduce the risk of an aggregate breakdown.

Polish rotary mower, like similar models from other manufacturers, is designed for a wide SPECTRA agrotechnical measures. Powder of grass for feeding, cleaning various agricultural crops. all this is included in the sphere of use of rotary mowers. However, as in any other technique, there are also several nuances here that you need to pay attention to first of all, acquiring such a mower.

The device is equipped

Among the main points and characteristics that should be paid to, the following are distinguished:

• minimum and maximum height of the cut of mowing grass;
• the area that processes the unit;
• knife speed;
• the width of the strip of the processed surface produced by the mowing in one pass.

Paying attention to these moments, you can get a reliable unit that will last for many years. However, there are already quite popular models in which all these characteristics are combined in optimal proportions.

Nevertheless, there is an even more convenient assistant who bears the proud name “self.propelled lawn mower with a seat”, you can get more detailed information here.

The EKIW brand, like previous companies from Poland, became famous for its quality products for the whole world. He supplies personal and farms with reliable, practical and affordable attachments. The basis of the EKIW product line is composed of cellets-pissing, rotary mowers and rake-ribs.

Polish EKIW buckets received a lot of positive reviews, among which models with five and seven sections were especially highlighted. The EKIW 5-sectional mechanism includes five swings and flat cutters, thanks to which it can process plantings with a row width 62.5-67.5 cm. The cost of such a device is 575.

EKIW hinged equipment 7-section consists of seven swings and the same number of plane cutters. It allows you to faster and more efficiently carry out the loosening of the soil and cut neat grooves for sowing crops. The price of the agricultural machine is 840.

Models of 4 wheels PZ-240 and 5 wheels PZ-250 Robble are popular from rakes of rakes. They have a sufficient capture width and can, like rotary mowers, work not only in tandem with a tractor, but also by a walk.behind tractor. Special EKIW devices improve the condition of the mowed grass and make it more blown, which positively affects the quality of the hay. The price of the EKIW units produced in Poland starts from 550.

Wirax and Lisicki mowel, Polish hinged. how to put a cylinder for lifting yourself

Agricultural equipment has long and firmly entered the familiar life of a rural resident. over, it does not matter whether he is engaged in agriculture at a professional level or not. One way or another, everyone is faced with the need to acquire such a technique, because the farmer’s work is very difficult, which is not always able to cope with his own hands.

And if you take into account the coarse of large agricults and farms, then there you just can not do without such technology. Therefore, in recent decades there has been an extraordinary demand for various sowing, tractor, soil and other types of equipment.

Various mowers for a tractor gained considerable popularity, allowing to process large areas, mating grass and various crops. Large agricultural companies promptly reacted to such a tendency, expanding the vector of their development to the production of such units and devices.

At the moment, three categories of main manufacturers of rotary mowers for tractors note: European companies, domestic manufacturers and Chinese equipment. Each category has its pros and cons, for example, Chinese manufacturers provide their equipment at very favorable prices, significantly different from European.

However, the low price is perhaps the only advantage of such models. If you need a really high.quality product, then your choice should fall either by equipment that is characterized by the optimal combination of price and quality, or for European models. Of course, the price of them will be slightly higher, but for quality, as we know, we always have to pay more. About a wise approach to the question of how to choose a lawn mower we will tell you here.

Modern production technologies and advanced technological enterprises located in Europe allows this quality to demonstrate to fully. One of the most famous manufacturers, popular among farmers, is the Polish. engaged in the production of various agricultural machinery, including rotary mowers for tractors. You can find out about a segmented mower for a tractor, which is an excellent alternative to Wirax mowers in this article.

Brand history

The company began its formation in 1994, when the first serial models of various agricultural machinery began to be produced. It was precisely such a development vector aimed at farms and their support that was a right decision at that time was approved.

Over time and an increase in production pace, the company began to open its enterprises at other points in Europe. This decision made it possible not only to increase the production of equipment, but also gave a considerable number of jobs where these factories were located.

Thus, the company, in addition to its main activity, also performs a certain social function, which is extremely important in the current difficult times.

In 2012, she united her two departments located in Turkey and Romania, making one large corporation. The company collaborates with many Turkish manufacturers of equipment and related components for them, which allows it to respond in a timely manner to constant changes and new trends in this market segment.

Virax Z 069 Steppie. Parameters and Assembly

This model is intended for intensive mowing of dried grass and its neat laid in the roll. It is used mainly on tractors with a rated capacity of 35 liters. With. With these agricultural seles, the performance of the equipment used is 1.2 ha per hour.

The rotary braid is equipped with 6 cutting blades, for the production of which enhanced hardened steel is used. Knives demonstrate high resistance to aggressive chemical reagents that are part of fertilizers and corrosion. To connect the equipment, a full.time VOM agricultural machine operates at a speed of 540 rpm is used.

Wirax Z 069 mower is released by a simple design made from shock.resistant parts. The support frame of the model withstands a large weight without the risk of deformation or failure of the main factory elements.

Technical characteristics of the Virax Z 069 mowing:

• capture width. 1.35 m;
• mowing height. 4 cm;
• Operational speed-10-15 km/h;
• weight. 350 kg;
• The manufacturer is Poland.

The model does not need regular maintenance. Its cutting knives are protected from sticking wet grass and are able to withstand strong blows to hard obstacles.

Changes

VIRAX 135 rotary mower is used to mow grass and small shrubs. It weighs 300 kg, so the mini-tractor to which it will join must have a power of at least 22 liters.FROM. And weighs about 800 kg. The mower is suitable for mini-tractors with a small track. During operation, the short leg of the lawn mower creates the required distance from the rear wheel to the rotor, while the mini-tractor will not knock the grass with wheels and will not interfere with its mowing. Lighting. 135 cm.

Working speed. 12 km / h. This provides a productivity of 0.65 ha / h. Cutting height of 5.8 cm is installed at the factory. But with the help of floating discs you can adjust the height and lower it by 3.2 cm. Adjustment can also be performed using holes in the device mounting system. The design can work on an inclined surface at an angle of 20º. With the regular operation of this device in the field of irregularity of the soil surface, the soil surface is smoothed out.

During driving, the device may encounter an obstacle. To protect the mechanism, it was equipped with a damping device. Thanks to the return spring, the fuse is triggered, while the cutting tool deviates back and bypasses the obstacle. The shaft has a coupling with locks to protect against damage. When he hits a stone, he provides a free shaft that protects him from deformation.

It can be folded due to the fact that the frame has an axis with both hands, which easily converts the device from the worker to the transport position.

Wirax Z-069/1 mower has dimensions 1.21×3.16×1.1 m. Coating 1.65 m. Productivity 1.6 ha / hour. The power of the tractor. 35 l.FROM. Speed. 15 km / h. The height of the grass mowing. 4 cm. The number of rotors. 2. Rotation speed of VOM 540 rpm. The weight. 350 kg.

The device is designed for tractors with a capacity of 20 to 80 liters.FROM.; used to mow agricultural crops and laying them into rolls. The drive comes from the cardan drive of the tractor. The device is easy to serve and operate, has good maneuverability and can be composed for transportation.

You can buy VIRAX from dealers by contacting. VIRAX 135 price. from 70 thousand. ; Wirax Z 069/1. from 75 thousand.

VIRAX is used to clean grain crops on our farm. This is a maneuverable device that can work on the slopes has good characteristics.

I work as a tractor driver. During the ripening of cereals, we delete crops using VIRAX. Mounted on a tractor. Works well, does not leave plants, carefully folds flakes in smooth buns.

Dear farmers, whether you use the attachment equipment for tractors presented in the article?

Viraks 1 35 mower. opportunities and advantages

This modification of the Polish brand is adapted for operation in difficult weather conditions. It is distinguished by high resistance to corrosion, which allows you to freely use it in conditions of high humidity.

Wirax 1 35 mower is connected to a power selection shaft operating at a speed of 540 rpm. During operation, it shows impressive performance, which is 0.65 ha per hour. At the same time, it is released modest dimensions that are 1.2 m in length, 2.75 m in width and 1.03 m in height.

The Polish Wirax mower is equipped with two durable rotors rotating at a speed of 2480 rpm. To download grass in the factory equipment of the model, there are 6 pre.pointed knives made of hardened steel. A special coating of blades reliably protects them from grass sticking, which greatly simplifies the maintenance of cutting elements.

Technical characteristics of the Viraks 1,35 mowel:

• capture width. 1.35 m;
• mowing height. 4 cm;
• Operational speed. 10-15 km/h;
• weight. 280 kg;
• The manufacturer is Poland.

Features of the operation of rotary Polish braids

Polish rotary mowers, as mentioned earlier, do a great job of their main work. mowing the grass surface in large areas of the area. But so that this lasts as long as possible and the work of the mower was stable, it is necessary to observe some rules that can significantly increase the service life of a separate unit.

Initially, after the purchase of the unit itself, the braid is in a disassembled state. The configuration includes detailed instructions with drawings that allow you to clearly see the entire assembly process. It is extremely important, at this stage, carefully study all the instructions, paying attention to all moments of the assembly, and only after that proceed to collect the finished unit.

It is clear that a Russian person is not used to rely on pieces of paper, but he knows everything perfectly and knows how, but this is still not the case where you can relate to the matter is so naive. After all, whether you will collect the Polish rotary mower correctly, not only the quality of the work performed, but also your safety and the people around you will depend.

After the product is assembled and ready for operation, you need to study all safety precautions from beginning to end. This is an equally important stage than assembling the unit, because in the design of the Polish rotary mowing there are cutting elements, from which almost anyone who will be in close proximity with a working unit can suffer.

Next, you need to install the assembled unit in the correct position, t.e. Thus, so that the wheels with cutting elements are parallel to the earth’s surface. Then, the main frame of the device is installed strictly perpendicular to the axis of the tractor.

We put on the end of the cardan shaft on the tractor.e. to the node, which transfers rotation from the engine to various attachments and trailers. The unit in this way in the operating position will perform its main work on mowing the grass qualitatively.

In operation, the Polish rotary mower, the device of which we previously described, does not represent any special difficulties. It is only necessary to observe certain measures and manipulations, among which:

Regularly check the cutting system consisting of knives, for stealing and wear. If necessary, they can either be sharpened on the machine, or replaced with new.

It is important to monitor the state of the belts, if there are punctures or cuts in them, and whether they are also stretched properly. If you are still not familiar with belts for the lawn mower, then we advise you to press here.

Periodically, you need to check the level of transmission oil, which is located in the gearbox on the aggregate frame. To do this, you just need to unscrew the cap and check the condition, as well as the presence of oil.

Observing these simple actions, you can significantly extend the life of Polish rotary braids, as well as avoid probable breakdowns, which may be completely inappropriate, especially in the midst of the summer season.

Wirax device. 1.85m

“Wirax”. 1.85m is designed to mow various agricultural crops, herbs and much more. In addition, Polish rotary mower 1.85 is an effective method of weeds and weeds that germinate abundantly in the fields.

Due to its design, the braid allows you to process large areas, which is very profitable for large agricultural enterprises. Rotor Polish braid. will become an indispensable assistant in rural life.

• weight. 380 kg;
• Dimensions (d/sh/c). 320cm/105cm/100cm;
• The width of the processed surface is 1.85 m;
• speed. 10 km/h;
• The total number of knives is 6;
• Tractor requirements. at least 40 liters.With.;
• The number of disks is 2.

So, we examined the technical characteristics of the main models of Polish rotary mowers. The indicators are largely identical, but still there are a couple of differences that affect the final difference in price. Which one to purchase it is up to you to decide, it all depends on which area you have at your disposal and what kind of requirements for the unit are important to you.

Specifications

The products of the Polish company Lisichka are leading a leading position in the market of small agricultural machinery. In terms of quality and durability, it is much superior to domestic and Chinese analogues.

The product has such technical characteristics:

• Plant capture width-135-185 cm;
• fixed height of the cut of grass. 32 and 42 mm;
• The number of knife drums is 2;
• The number of knives is 6 (2 × 3);
• the number of revolutions of drums per minute. 2025;
• The required power is 25 kW;
• The speed of rotation of the power selection shaft is 540 rpm;
• maximum speed with effective mowing is 15 km/h;
• permissible speed during transportation in the working position. 20 km/h;
• length. 300 cm;
• height. 100 cm;
• width. 90 cm;
• Weight. 300 kg.

The unit is easy to maintain. Casings protect mobile mechanisms from moisture, lumps of land and flying grass. The working organs are enough to clean with a brush and a rag from settled dust.

Reviews and prices

Depending on the modification and width of the capture, transportation costs and the purchase of spare parts (belts, knives) can be added to this indicator. Delivered equipment depending on the configuration, model, technical condition and degree of wear and tear for 30-45 thousand. rubles. Renting agricultural machinery will cost the customer 500-750 per day. In case of leasing, the cost of use can be halved.

I contain a farm for growing cattle for milk and meat. For some time he used segmented mowers that made passes and often broke. Compared the at prices, consulted with colleagues, studied the opinions of experts and decided to stay on Polish equipment. The braid in the case showed herself well. she easily copes with dry and lightweight grass, cuts the bushes. The performance is high, under good conditions, about an hour goes on processing hectare. I use the product not only for the field, but also the lawn haircuts.

Inherited received a cottage with a large site, which is overgrown with grass. In the barn stood an old, but working tractor. I decided that you can get profit from the field without much effort by selling mowed grass to farmers for feeding cows. I bought a Polish mower of a fox with a capture width 135 cm. Awquiring equipment works without problems, quickly and efficiently. After the passage, he leaves evenly grass rolls, which then easily assemble. I help my neighbors cut the lawns and cleanse the neglected gardens from weeds.

I keep on the farm several cows that need a lot of food. Manually harvest hats for a long and difficult, especially in the heat. I decided to purchase a trailer mowing of a fox. The technique is reliable, productive, easy to maintain. Cuts grass almost under the root, is not afraid of contact with the ground and stones. The equipment paid off quickly, as I rent it to summer residents and owners of neighboring farms.

Features of the device of the Polish rotary mowing of the fox (Lisicki)

Polish rotary mowing chanterelle reviews collects numerous and positive. The product embodies many years of experience in designers, new technologies and affordable cost. Having compact dimensions and high performance, the equipment is in demand in large agricults and small farms. Awesome equipment is used to mow grass and clean the virgin areas. The well.thought.out design of the unit provides equally high.quality cutting of thin plants and shrubs.

Wirax and Lisicki mowel, Polish hinged. how to put a cylinder for lifting yourself

Agricultural equipment has long and firmly entered the familiar life of a rural resident. over, it does not matter whether he is engaged in agriculture at a professional level or not. One way or another, everyone is faced with the need to acquire such a technique, because the farmer’s work is very difficult, which is not always able to cope with his own hands.

And if you take into account the coarse of large agricults and farms, then there you just can not do without such technology. Therefore, in recent decades there has been an extraordinary demand for various sowing, tractor, soil and other types of equipment.

Various mowers for a tractor gained considerable popularity, allowing to process large areas, mating grass and various crops. Large agricultural companies promptly reacted to such a tendency, expanding the vector of their development to the production of such units and devices.

At the moment, three categories of main manufacturers of rotary mowers for tractors note: European companies, domestic manufacturers and Chinese equipment. Each category has its pros and cons, for example, Chinese manufacturers provide their equipment at very favorable prices, significantly different from European.

Modern production technologies and advanced technological enterprises located in Europe allows this quality to demonstrate to fully. One of the most famous manufacturers, popular among farmers, is the Polish. engaged in the production of various agricultural machinery, including rotary mowers for tractors. You can find out about a segmented mower for a tractor, which is an excellent alternative to Wirax mowers in this article.

Specifications

The products of the Polish company Lisichka are leading a leading position in the market of small agricultural machinery. In terms of quality and durability, it is much superior to domestic and Chinese analogues.

The product has such technical characteristics:

• Plant capture width-135-185 cm;
• fixed height of the cut of grass. 32 and 42 mm;
• The number of knife drums is 2;
• The number of knives is 6 (2 × 3);
• the number of revolutions of drums per minute. 2025;
• The required power is 25 kW;
• The speed of rotation of the power selection shaft is 540 rpm;
• maximum speed with effective mowing is 15 km/h;
• permissible speed during transportation in the working position. 20 km/h;
• length. 300 cm;
• height. 100 cm;
• width. 90 cm;
• Weight. 300 kg.

The unit is easy to maintain. Casings protect mobile mechanisms from moisture, lumps of land and flying grass. The working organs are enough to clean with a brush and a rag from settled dust.

Main technical characteristics:

Wirax mower (Polish assembly) is attached by hanging the tractor’s rear thrust, which are included in the attachment system. Performing mowing elements of the mower lay mowed grass in a roll. Thanks to this, the farmer does not spend extra time to collect mowed grass, it is already conveniently laid for further processing. An additional element protective casing, which is included in the equipment set. Thanks to the innovative selection of materials for the manufacture of the main nodes of the braid, the equipment has a long operational period. It is this parameter that is very valuable to domestic farmers.

This is interesting: the technical characteristics of the K-454 press collection brand FortSchritt (Fortshit)