Brush attachment for cleaning in an electric screwdriver
A rivet tool attachment for a drill or electric screwdriver
Turns an ordinary electric screwdriver into a universal, powerful, practical rivet gun. Indispensable for craftsmen, professional builders, craftsmen, locksmiths. The nozzle allows you to work with rivets of different types and sizes, is versatile and easy to use.
The clever shape of the riveting tool allows you to apply a small amount of force while working. The nozzle is modestly sized and lightweight. It helps to install the rivets and remove them. The tool is effective both in body repair and in joining various structural elements.
The rivet tool bit
| 770,83 1 843,28 |
| 4,9 |
| 398 |
| 849 |
| Free |
Common malfunctions and causes
Because of their special operating principle, these parts break down on a regular basis. As they work, they rub against the manifold all the time and wear out as a result. Domestic screwdrivers that feature quality manufactured graphite parts are made so that they wear out as slowly as possible. In tools that are seldom used, critical wear and tear rarely occurs. Worn brushes stop making contact with the collector.
Sometimes there is a break in the circuit that causes the motor not to start at all. If the brushes get jammed in the guides and the spring is unable to hold them well against the manifold, they begin to hang.
You can visually identify the following breakdowns :
For an electric screwdriver is very dangerous for their sparking, which appears due to the fact that the collector accumulates dirt and soot. Need to be cleaned with zero-grit sandpaper. Contacts short circuit due to accumulation of copper powder or graphite dust. Remove everything with any sharp object, a knife is fine.
Brushes need to be changed often with regular use of an electric screwdriver
Sparking will be observed if the contacts differ in resistance level, and the brushes are not properly matched in basic parameters. Even properly matched parts need some time to wear into place. Professionals recommend that you run the engine at no load. The manifold must be cleaned regularly. Special lubricants are used to extend the life of an electric screwdriver.
The most common cause of malfunction is total exhaustion, simple wear and tear that occurs over time.
Brush heads for electric screwdriver
With this convenient brush head you can quickly sweep away stubborn dirt. Brush set is great for removing old stubborn dirt in the bathroom. It allows you to clean joints between tiles from dirt, fungus. No need to scrub stains manually and waste a lot of time.
The set has several scrub-brushes for cleaning different surfaces. No hassle at all: you can replace one nozzle with another, given the size and shape. The medium-hard bristles allow you to clean even the soles of your shoes from heavy dirt.
Electric screwdriver brush set for cleaning surfaces
| 260,74. 488,64 |
| 4,9 |
| 917 |
| 6801 |
| Free |
Tool nozzles
Tool nozzles can be purchased at the Order online store for low with up to 626 bonus cashback per purchase.
Armed with power tools, you can successfully carry out any construction and repair work. Because of the minimalistic basic equipment of the device it is not always possible to use it to its full capacity. To expand the set of functions of drills, grinders, screwdrivers, get additional accessories. In the catalog of the Internet-shop “Order” you can find accessories of excellent quality. Find a product you are interested in on our site and buy it in our online store.
Accessories and where to find them
Want to buy accessories for power tools at a low price? Check out our range. Accessories for professional and hobby applications. Reliable helpers will never fail in work. Replacement parts are useful in almost every situation.
In the catalog of the Internet-shop “Order” sells accessories for all kinds of power tools. Owners of grinders for removing old paint coating or rust need scraping metal brushes of different diameters, abrasives. When regularly working with a drill, you can’t do without buying discs, sharpening stones, brushes-cups. You will regularly have to update the nozzles for the peorator, which is involved in work associated with crushing, drilling, drilling through holes.
If you have replacement accessories for electrical equipment at hand, it means that all conditions for productive work are created. Buy them in advance and with a stockpile, because you never know how quickly the last bit will be out of use. In the case of an unexpected failure of the part you will have to suspend work, look for adapted for the model of brushes for angle grinder, adapter, grinding stones. Order the right products with delivery in Russia you can in the store “Order”.
Our catalog represents the products of renowned manufacturers. Technologies do not stand still. Availability of products is constantly updated, there are improved and durable heads. They will provide the maximum comfort for the worker. Consumables are available in our shop, giving you preference to the most sturdy variants for household and industrial use. The original product has passed the mandatory certification, which confirms its high quality.
Well, let’s move on to the bits and accessories that will allow (at least in theory) to widen the possibilities of your electric screwdriver.
Flexible bit extension
A well-known and quite useful device that allows you to screw a screwdriver in the most hard-to-reach places. Made of sufficiently hard plastic and 295 mm long.
Rigid extension cord for bits
Standard metal extension cord for an electric screwdriver. Doesn’t bend accordingly, but allows you to use much more force than its plastic counterpart. The seller has 3 versions in 6cm, 10cm and 15cm. This tool has a bit retainer to prevent the bit from dropping out at the most awkward moment.
Angle nozzle for an electric screwdriver. 105 degrees
Another device for hard-to-reach places. contra-angle nozzle. I think the principle is clear. Also, the seller has a version of this nozzle with a metal stop that can be used as a lever. Handy if you can’t reach it by hand.
Nozzle. pump
Pump for water powered by a drill or an electric screwdriver. Can be used to fill / drain water from the aquarium and pump water from the well (if you do not want to pull the bucket). As for the amount of water this pump can pump, it depends primarily on the power of your electric screwdriver. In reviews write about 100 liters in 5 minutes.
Sets of brushes and jaws for cleaning/polishing surfaces
Assorted sets of brushes, sponges and brushes for cleaning and polishing various surfaces. There are kits with metal brushes and a flexible extension cord.
Self-tapping screwdriver set
Set of 6 extractors for removing snapped bolts and screws. To drill a hole with one side of the extractor with needed diameter, screw it into the hole with the other side and after jamming unscrew our bolt (self-drilling screw). Made of HSS 4341 high carbon steel.
A set of socket adapters. 1/4 inch, 3/8 inch, 1/2 inch
Set of 3 adapters for 1/4″, 3/8″, 1/2″ sockets. Perfect if you don’t want to turn nuts by hand.
Magnetic nozzle
The easiest and most useful tool. Magnetic bit for your electric screwdriver that prevents you from having to hold on to self-tapping screws with your hands. Respectively the probability of driving a bit into your finger is considerably reduced. Costs pennies and has just a huge number of orders.
Pipe flare nozzle
Nozzle for flaring copper tubing. Allows you to expand the diameter of the tube to fit another tube. Reviews show it works very well on thin-wall pipe, but it can be problematic on thicker walled pipe.
Nozzle for chamfering screws, studs, etc.д.
A small bit for deburring and chamfering threads on bolts or studs, to make it easier to turn nuts on them. Made of CR12MOV steel (according to the seller).
Screwdriver sharpening tool
Device for sharpening drill bits. Suitable for drill bits from 2 to 12.5 mm. Has more than 15 thousand orders and plenty of reviews, so you can assume that the sharpener is doing its job well.
Swivel head for quick bit and drill changes
This bit is designed so you don’t have to reposition the bits or drills in your electric screwdriver. For example if you drill holes and screw in screws. With this attachment, you can (in theory) simply mount the drill bit and bit on different sides and flip the head as needed.
Screw feeder for automatic screw feed
- Disposable tapes. And a set of 20 blank bands costs 400.
- These very tapes need to be “loaded”, and that takes time (unless you have a partner who can do it for you).)
Sigma M8 for threaded rivets
The nozzle for M4, M5, M6 and M8 thread rivets. Although the same seller has attachments for other sizes. It’s quite expensive, so not many orders.
Sabre saw
Well, this attachment turns an electric screwdriver or drill into a sabre saw. Recommended rpm for normal work from 800-1500 rpm. Judging by the reviews with the sawing of branches and small wood quite good.
The nozzle. jigsaw
And immediately the jigsaw bit. The principle of operation is about the same as that of a sabre saw, only it is designed for jigsaw blades. Surely you can cut something with it. But I think it’s easier to buy a chain saw than to pay extra money.
Twist wire nozzle
Wire stripping and crimping tool. You can use it manually, or you can plug it into an electric screwdriver. In general, the YouTube video makes it clear that it works, but again, you need to get the hang of it.
Garden drill
Well here it all depends on the power of your electric screwdriver and the hardness of the ground you are going to drill. The drill itself is not big. 8 cm in diameter and up to 30 cm long.
A rivet tool for an electric screwdriver
An accessory which should turn your electric screwdriver into a rivet gun. Designed for simple aluminum rivets. Has a bit more than 500 orders and by the looks of things it works, although it requires some skill.
Metal sheet metal cutting bit
Metal cutting nozzle. And judging by the reviews (well, how else) with a metal thickness of up to 1 mm quite cope. With thicker metal, problems can arise. Cutting width is about 3-4mm. However, of the disadvantages it can be noted that the cutting rod dulls rather quickly. Although you can buy a replaceable one on ali. In general, in some moments, may well replace the metal scissors.
Description
Brush or brush for cleaning the car is an important and necessary accessory. These professional tools allow you to greatly simplify the cleaning process itself, while significantly saving time. quickly remove dirt, remove dust, and get rid of dirt in difficult to clean places.
They are used for cleaning the wheels, upholstery inside the cabin, removing dirt from the engine compartments.
There are different types of brushes.
Drill Brush Shower Cleaning! (Satisfying Before and After)
Professional tools with stiff nylon bristles. They are often used for very dirty places, such as the carpet in the car interior. And you can also use brushes that have stiff bristles to wash rubber mats and for tires.
Brushes made of horsehair. They are suitable for cleaning polished surfaces or removing dust. Thanks to the use of such models on the surface will not appear scratches, as their bristles are soft and safe.
Nylon tools with fine bristles are used for work when cleaning delicate places. They are suitable for cleaning cup holders, joints of plastic elements, cracks.
You should pay close attention to the products used for car rims. Brushes with stiff bristles are ideal for standard alloy rims. For hard-to-clean rims, it is best to use a special “furry” brush. It is also important to use acid-free chemicals in this case.
The right choice of brush or brush will allow you to quickly and accurately clean dirty places, improving the appearance.
Car dry cleaning technology with the use of a brush on an electric screwdriver
The technology of cleaning the interior of the car using the brush on the drill contains all the same obligatory steps:
- Vacuuming dust and dirt.
- Surface treatment with a tornado with a minimum flow of chemicals. This step removes any sand residues that the vacuum cleaner has not pulled out of the upholstery. Minimal amount of chemicals allows the dust to clump.
- Vacuuming wet lumps of dust.
- Application of chemicals with a pneumatic sprayer or foam generator.
- Cleaning the surface directly with a dry cleaning brush attached to an electric screwdriver.
- Rinsing and extracting chemicals with a wet vacuum cleaner.
- Drying.
Brushes Drill bits
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
” /
Wood brushes for drill, electric screwdriver and peorator
Suitable for all types of drills and other high-speed power tools. Also in this section there are adapters with a shank on the drill, designed for disc brushes with through holes.
Wheel brush for drills with wire diameter of 0.2-0.3 mm is used for surface cleanup from paint, varnish, corrosion. Its bristles are arranged in a circular pattern, which allows both horizontal and vertical work, contrary to the helical (corolla) brush. The brush head for the drill is usually bought in a set with a brush brush for a drill. Scraping is the process of removing the top layer of loose metal, scale, which gave the name to this brush. With its conical cross section, this brush smoothly and evenly removes softened layers from the metal surface. However, it must be remembered that sanding the surface produces a dense dust layer and therefore requires the use of a dust extractor for such work. When working with a wheel brush, the dust is evenly removed to the outside of the workpiece.
Before you buy a metal brush on the drill, you should decide for what kind of work it will be used: machining grooves, narrow or deep surfaces.
You need a disk brush, covered with a thick soft layer (paint, varnish). In all cases, the brush head on the drill must meet the following requirements:
- It is preferable to choose twisted wire brushes. they last longer;
- type of brush (end, whisk-shaped, disk-shaped, cup-shaped);
- Brush coating (brass greatly increases the life of the lint);
- Capable of working in tough conditions. Twisted wire is flexible and resilient for much longer than traditional wire. This last one is recommended for hand brushes., not for drill brushes.
Our experts recommend buying coil wire brushes and coated brushes without considering the costs: they pay off many times over and the use of high quality brushes guarantees high quality work as well.