Crawler module for power tillers with your own hands

Caterpillar attachment to the trimmer

All-terrain crawlers. it’s a unique opportunity to transform a standard single-axle tractor with your own hands. Such tuning will require absolutely no change in the basic design of both the vehicle itself and its individual units or aggregates.

Under the brand name “Krutets” the production of all-terrain tracked mover has been developed and arranged, which fit all domestic and imported power tillers, regardless of their power and weight.

How to make caterpillars for your power tiller with your own hands

Let’s see how to make caterpillars for a power tiller with your own hands. For the assembly of the caterpillar by your own hands can use different materials that are not difficult to find. List of materials and tools that are needed to make the track:

• angle grinder;
• drill;
• electric jigsaw;
• Welding machine;
• bolts;
• nuts;
• wrenches;
• knives;
• screwdrivers;
• pliers;
• sanding tapes;
• chains.

A crawler drive for a power tiller must distribute the load evenly on the ground during operation. Therefore, it must be strong and at the same time lightweight.

The most affordable way is to use a roller chain with a conveyor belt. In order to obtain a track from the specified materials, the edges of the chain and tape must be stitched.

To do this, you can use a machine tool, or you can sew by hand. But this method is unreliable. A hinge, similar to a piano tape, will also be suitable for joining.

Let’s consider how to make homemade tracks for a motor-block from tires. There is another method of making homemade tracks for the machine, which uses tractor or car tire tread.

These tracks are easier to make and much more practical. This method has another advantage. you don’t have to prepare the grousers separately.

Fabrication method: first you need to pick up the tire and carefully cut out the tread track from it. If you do it by hand, you’ll need a well-sharpened knife. But, as practice has shown, it is better to use an electric jigsaw and a saw with fine teeth.

To reduce friction, you should occasionally wet it with water or a special soapy solution while working with the jigsaw.

The advantage of a track made of tires is that it is initially round and has a closed circle. The disadvantage may be the limited width of the bar.

Let’s see the way of making a product from belts and chains. Standard belts with a wedge-shaped profile can also be used to make tracks. They are joined together, using the grousers, which are attached to the belts with screws and rivets.

When making a track out of chains, they should be the same size. The chains are unfastened, closed in a ring and welded together. It is possible to make earth hooks from steel plates, which are used to bolt chains together.

The diameter of their circumference is 30 mm. These tracks are not designed for heavy tractors like MTZ and Agro.

Prefabricated caterpillars for power tillers are very easy to install. They are used as attachments.

Tips for use and after

If you use crawler modules for your power tiller, it is important to check the tension of the chain and oil the elements that cause friction during the movement of the power tiller. In addition, it is necessary to check each time before use to see if there are any breaks in the chain.

Check the machine and the tracks after use and have them inspected to find any damage or broken bits

When using a power tiller, it is important not to drive over the roots of century-old trees and stony mounds, as well as stumps, otherwise the tracks will tear

Note! To make the machine’s crawler tracks last as long as possible it is important to give the machine all the care it needs

• Monitor the level of adjustment and tensioning of the chain.
• On the outside, make sure the chain is in one piece when riding on the machine.
• Always lubricate all mating parts and mechanisms with machine oil.

Elementary recommendations on care will help to reduce to zero the risks of failure of ready motor blocks and in particular the crawler unit. The crawler is a tremendous help when it comes to carrying out your modeling tasks.

Great home made crawler tractor / Excellent home-made crawler tractor

Attaching tracks to your power tiller makes a big difference in maneuverability, cross-country ability. This leads to an increase in the Spectra of potential operations the machine can handle. Crawler tracks outperform traditional wheels in some applications. Regarding the process of remaking, it is quite simple, but you must have experience, knowledge, prepare materials and tools, if you want, attentive to work, the task at hand. everything will turn out.

Making homemade caterpillars for a single-axle tractor: photos, videos, recommendations

Many people engaged in the manufacture of homemade machinery, also develop and all-terrain vehicles on tracks and homemade tracks on a single-axle tractor. When bringing this idea to life, people use a variety of solutions. But making tracks remains a big problem for fans of this type of transport.

After all, if the all-terrain vehicle or snowmobile is made with his own hands, then the tracks should be homemade.

Car tires

This is a fairly simple way to make tracks on a single-axle tractor with their own hands. At the same time such a part will be quite reliable and practical. The track, made from an automobile tire, initially has a closed contour. In addition, in the work on the machine, equipped with such a drive, you will not need the soil traps. The only disadvantage is the small width of the tire.

Before you start the assembly, the tire tread has to be carefully removed from the material. This is done manually with a sharpened knife. Faster and easier to handle with an electric jigsaw and saw (the teeth should be fine). If the tread is removed with a jigsaw, you should periodically moisten it with water or a soapy solution to reduce friction.

After removing the tread, study the “underside” of the tire. If there are additional layers on it, they also need to be removed.

Design features of the device

Making components of a homemade track for a power tiller with your own hands allows you to save money on the purchase of factory devices and further operation of the equipment. If everything is done correctly, then the caterpillars for a power tiller made by hand increase the characteristics of the passability.

Compared to their wheeled counterparts, crawler tractors are not as widespread. The explanation is simple. Wheels from Texas, Patriot, Caiman, VIKING, Forza are best suited for plowing land. This design is best suited for soil work.

The modification of the wheeled motoblock is a work consisting in the attachment of one additional wheel on each side. You get a four-wheeled single-axle tractor, on which you can put the tracks. They can, in turn, be purchased or homemade. Extra wheels can be made detachable. This makes it possible to turn the machine into a standard single-axle tractor that is ideal for gardening work.

This is done by attaching the wheels to the axle, which is already provided in the design, via a rigid or flexible gear. Such a solution is considered appropriate, since it eliminates the need to mount additional mounts. As for the structure of these power tillers, they fully correspond to the parameters of the wheeled versions:

• Engine. It is powerful, four-stroke. Features interlocking axes. This allows the single-axle caterpillar tractor to turn on the spot without making a full circle.
• Transmission. The standard set includes the gearbox, clutch system, and gearbox.
• Undercarriage. This is where the tracks are used. They replace the wheelbase. If the machine is rebuilt, one sprocket is added to each side of the existing wheel set. They are fitted with a self-made caterpillar.
• Controls. Located on the handle. Includes emergency stop mechanisms and various kinds of clutch levers.

Before you start making your own, you need to evaluate offers in stores that specialize in the sale of such equipment. Particular attention should be paid to the price of certain types of tracks for well-known manufacturers of power tillers. Let’s say the track on a Neva single axle tractor costs about 28,000 This is a fully functional snowmobile attachment. A driver’s seat can be purchased separately, giving the single-axle tractor the features of a mini-tractor crawler, albeit with less impressive performance. Technical parameters here are as follows:

• Develops a speed of about. 18 km per hour;
• the weight of the set-top box in total. 37 kg;
• Width. 60 cm;
• length. 100 cm;
• height. 34 cm.

Accommodates one driver and one passenger on board. In addition, on sale you can find attachment to the caterpillar motor-block, which is designed for the models Salyut and Agat. The cost of it ranges from 25 to 27 thousand. This design does not provide for the attachment of the driver’s seat. Because of this there are some restrictions on the functionality of this device. But for off-road driving and snow, such a transport is quite suitable.

Algorithm of making parts

There are several proven ways to make a caterpillar with their own hands. They have proven to be the most reliable.

Transporter belt application

It is considered one of the simplest methods. In addition to the conveyor belt, you will need a sleeve roller chain. Simplicity in this case lies in the fact that for the manufacture does not require a lot of auxiliary materials and tools. In order to prolong the life of the transport belt in the device, it must be encircled by a fishing line. At the same time it is important to ensure a pitch of 10 mm. To connect the tape is necessary in this case a ring, you need to stitch it on the ends or use hinges. Particular attention is paid to the thickness of the transport belt. This directly affects the level of load on the machine. Optimal would be the selection of tape thickness of at least 7 mm. Among other things, you will need to take care of an additional wheel on each side. You can remove it from an old car, but it is important that its diameter coincides with that of the wheel on a power tiller.

Homemade caterpillars for power tillers with their own hands

To increase the carrying capacity of the motoblock and use it as a cross-country vehicle or snowmobile, you can equip it with caterpillars. You can buy them ready-made, but they are expensive, and it is not always possible to find the right one for your power tiller. There are several ways to make a caterpillar on a single axle tractor with their own hands.

It’s easy to turn your single-wheel drive tractor into a tracked off-road vehicle with our tips. You do not need expensive materials and too much time.

Tanks don’t fear the dirt: Tracked tracks for your own hands

The time of work in the gardens and orchards is approaching, and gardeners have to think about how their equipment will cope with the tasks assigned to it. For example, an ordinary single-axle tractor is not always able to pull the attachment. it starts to slip even despite the grousers on the wheels. And this is not the only problem. Often to dacha plots in the spring simply do not pass because of the mud, which means that such an issue requires an urgent solution, as Homius editorial offers the manufacture of tracks for various wheels with their own hands.