How to disassemble a Bosch beautixx curly hair dryer

Main breakdowns and their causes

Breakdown of such a tool can occur at any time of its operation. Especially unpleasant if it happens in the midst of construction work. In most cases, it is the fault of the person who is often negligent with the power tool. The main breakdowns are considered a bend in the power cord, the failure of the tool button and temperature adjustment. Of course, there can also be more global malfunctions.

For example, the motor or fan can fail. The heating element in this regard is not eternal. Most malfunctions can be diagnosed independently, but there are those that take quite a long time to identify. In this situation, it is best to contact a specialized service center.

If a person is confident in his abilities, he can carry out the repair of a hair dryer and independently.

The most complicated breakdowns include engine or fan failure. In most cases, they have to be replaced, and besides, it is difficult to find the necessary spare parts.

Hair dryer repair bosch beautixx comfort ion

The other day my irresistible, unique and innermost Spouse began to complain that her favorite hair dryer Remington does not work It manifested as interruptions in the normal operation, depending on the position of the power cord. That is, if you pull the cable. the hair dryer turns off, if you press the hair dryer. went warm air. I immediately figured out what’s what and began to tear my shirt and waving my favorite soldering iron. like let me do the disassembly and repair of hair dryer right here and right now.

In general, after a short groaning my screwdrivers clashed with her hair dryer in an epic battle to the first soldering. I say at once. these instructions can be used for the majority of hair dryers firms Rowenta, Braun, Philips, Bosch and Scarlett Of course, disassemble all the hair dryers are different, but the principle of the device they have the same. Let’s go.

How to disassemble the hair straightener Bosch?

Help disassemble, in theory under the cap should be a bolt, but the cap does not want to remove, even if the efforts (and not bad).

the hair dryer has a removable cover, there is a screw under it, you unscrew it and pull out the second cover

What makes you think there’s a bolt?? this device is all on the latches if my vision does not change like I see a recess under the upper claw near the ceramics there is a screw, unscrew it and the other side is probably the same and then carefully apart along the seam undermining the edge of a thin, preferably wide flat screwdriver and usually disassemble a little blunt scalpel

You are right, there is a bolt under the cap, make more effort.

I have applied more force and no, there is no bolt under the cap. From the other side in the same way.

1.Remove one of the covers (in my case it was the right cover of Bosch PHC2520/01) 2.Unscrew the screw under the cover, you need a special tool for this 3.Push out the sleeve and the rectifier is divided in two parts 4.Remove by lifting up the plastic ring on the power connector with a blunt scalpel or similar tool. 5.Remove (just by hand) the cover from the power connector. 6.Disconnect the power cord from the connector. 7.Using the same tool, unscrew the screw on the half with the spring. Undermine the cover, which is held by 6 more latches and remove it. 8.Take out the spring. 9.Inside the spring there is a bushing (small cylindrical, in my case it fell out and rolled under the sofa) 10.Unscrew the screw on the other half of the rectifier. 11.Lift the lid, which is still attached to 6 catches and remove it. 12.Then according to the situation. In my case, the contact on the power switch on the slider was burned out. Luckily, in my case it was symmetrical to the center pin (like SS-6 1P2T), so I just unsoldered it and flipped it back onto the board. / / / / / / / / / / / / / / /

Preventive maintenance

To avoid unnecessary expenditures on repairs, it is advisable to carry out preventive maintenance of the device. This also requires that you disassemble the hair dryer. How to prevent? First of all, it is a visual inspection. Examine the hair dryer you are using for external damage: continuity of the cord, plugs, possible melt marks on the case. If there is such damage, your hair dryer needs to be repaired or replaced. Important! Do not work with a damaged hair dryer, it can cause injury or fire.

My hair dryer needs to be cleaned from time to time. The hair dryer gets clogged with dust and cut hair in the process. The rear cover with protective mesh can be removed for cleaning. Through the opening you can get to the heating element. With a soft brush gently brush dirt and hair off the mesh and clean the coil. Here you have learned how to disassemble the hair dryer to repair it. To summarize.

How to disassemble the hair dryer comb

Brought a hair dryer Vitek VT-2272 look, began to blow worse and overheat.

I am writing only because I could not find any information on the network how to disassemble it, maybe it will be useful to someone. At first I twisted it all by myself. everything is very tight and stiff, I could only peel the cover off over the modes switch. I decided to put it aside and look in the network, so as not to break something, but in the network 0. Had to break further to the touch. I managed to remove the back cover by shoving two screwdrivers on the sides in the connector area and move the cover, it has two pawls.

Then you need to open the connectors on the outer shell,

removing the cover from the mode switch and taking it out of the box, and then carefully pulling the halves out of the front ring,

somehow push the 4 pawls and pull them out is just not real, reassembling this ring slammed with a wild force.

And a little tiphak about how to remove the impeller easier. The hole in the impeller is through, screw a suitable bolt into it holding the impeller, here axle 2.3mm, bolt with 2 threads outside diameter.4mm almost completely compressed it, then I unscrewed it a little, and dragged it with pliers by the cap, rocking, in my experience it was the easiest to remove the impeller, nothing was broken and very fast.

The design has a protection against winding hairs on the shaft. there are four tendrils on the housing,

this helps but not quite, I also had to grease the bushings and the armature axle. On the heater side the motor axle was polished to a shine from rubbing against the fiberglass insulation of the electrical stuffing, pulled back the wires and also lubricated. After that, the engine started much more vigorously, almost as good as new =).pis

The appearance of absolutely any girl forms her hair. An ordinary hair dryer is indispensable for hair styling. Today there are many different models that have different principles of action. In beauty salons use professional hair dryers, at home you can use a standard hair dryer, and if you are going somewhere, it is suitable for this hair dryer of compact size.

But what to do if the hair dryer does not turn on or broke at all?

Sometimes after a bad fall or other mechanical effects this device stops working. A great way out of this difficult situation is a complete disassembly of the hair dryer. You want to know how to disassemble the hair dryer? There is nothing complicated about it, the main thing is to follow the steps of the instruction.

The first step is to disassemble the case. In most models (for example, the rowenta pro 2300 and braun 3536) it opens into two identical halves. To observe safety rules before unscrewing screws be sure to remove the power cord from the socket.

Usually the body of the device is held on simple metal screws. They can be with non-standard heads in the form of a plus, fork or star. Therefore, before you disassemble your Philips hair dryer, you need to take care to have the necessary tools.

After opening the device, you will find the internal mechanisms of the device, which are responsible for its smooth functioning. If your hair dryer is broken, the cause of the breakdown will be hidden in these parts. In addition, some models have additional fasteners in the form of latches and hidden screws, hidden under the decorative covers.

You want to know how to disassemble the Philips salondry control hair dryer? To do this, you need to familiarize yourself with its internal structure and carefully examine all the parts. The most frequent breakdown of many devices is a damaged power cord. If there are any burnt or fractured parts, it will need to be resoldered.

The main internal element of any hair dryer is the fan. It is driven by an electric motor and draws air through a special hole with a grid. In some cases, the failure of the device is associated with its contamination, so if there is dust, it should be thoroughly cleaned.

The air passes through the heating element. a wire that is wound on the thermostat. It should be in one piece. If there are tears, the spiral parts should be twisted or soldered. Some models (for example, babyliss pro) are also equipped with a limiter, which does not allow the device to suck in with the air long hair and other lint. It can also clog if the device does not work properly.

If you hear a crackling sound and sparks are visible when you plug in the unit, this indicates that the motor is broken. This problem can be solved by replacing the copper windings and diode bridge. However, it is difficult to perform such a repair at home, so in this case you should go to a workshop.

You want to know how to disassemble the hair dryer rowenta brush activ 1000? The design of this device has several nuances compared to a conventional hair dryer. In order to inspect the internal elements and mechanisms in case of breakage, it is necessary to perform a few simple actions:

• Remove the plastic nozzle from the front of the device, as it will later interfere with disassembly. To do this, you need to move it gently to the right and left until it is completely detached from the device;
• When removing the plastic ring, it is not recommended to use screwdrivers and other tools, as they can damage the housing and leave visible scratches on it;
• After that, it is necessary to remove the rear nozzle-grid, which hinders the disassembly of the appliance. At the same time you should not apply too much force, because it can lead to its breakage;
• Modern models of hair dryers of many brands (roventa, remington, Scarlett and others) do not have metal bolts on the body. The two parts of the hair dryer are fastened with latches. To separate them, the two halves of the housing should be pulled away from each other, simultaneously rotating.

So you do not have to repair appliances yourself need to buy a good hair dryer. What to choose from the variety on the market? Before you buy, you should pay attention to the reputation of the brand, because only well-known manufacturers produce quality products. Other criteria for selection are the power, the number of modes, the function of cold air.

We have told you about the main features of the internal device of the hair dryer, so you should not have any questions about how to disassemble the roventa brash active hair dryer and other brands. However, remember that with self-repair of small appliances should follow safety rules and be sure to pull the power cord out of the socket.

Power supply interruption Typical problems

Due to the simplicity of the principle of operation of the hair dryer, its possible breakdowns are typical and to cope with them it is possible even for a simple user.

Something smells burning

The problem is usually caused by hair, dust, or lint on the coil. If the element is dirty, the rotation speed of the impeller decreases, the overheat protection system is triggered, which causes the unpleasant smell. To resolve the situation, it is enough to clean the heater, and then check the performance of the device. If the burnt aroma does not disappear, it is worth contacting a service center.

The filter is located at the back of the hair dryer, on the air inlet side

No power supply

The first thing to do is to make sure that there is electricity in the socket and that the power cord is not damaged. Even if no external damage is noticed, you need to make sure that the current flows through the wire. To do this:

• It is necessary to disassemble the case and check the power contacts, using a special tester;
• The next step is to check the power button, to make sure that its pressing is not hindered by internal debris or caked dust. An even color without charred marks will tell that the contacts are working properly;
• If damaged connections are detected, they must be cleaned with a knife or emery;
• Connect the device to the mains, but do not turn on the start button on it. It is necessary to bring a tester to the terminals of the button to find out whether the voltage.

If the cable is found to be faulty, it should be replaced with a new one. If there is no such a possibility, it is acceptable to use insulating tape to isolate the stripped and twisted contacts. If you find a problem with the button, you can try to clean the contacts or disconnect the part at all, then the unit will start immediately after plugging in the socket.

The hair dryer does not turn on

As in the previous case, the problem may be caused by a lack of electricity or a broken cable. Then the procedure is similar to the one described above. Another possible reason is that the electric motor is broken. The precursors of such trouble are the symptoms:

• A small crackling sound is heard during start-up;
• The motor works irregularly;
• the smell of burning wiring can be heard;
• A hum is heard when the fan is not spinning.

If such a fault is suspected or discovered, it is almost impossible to solve it by oneself, since it is very difficult to identify the specific cause. In addition, the cost of repair will not be cheap, in many situations, it is easier to buy a new device.

Reduced efficiency

When this problem occurs, it is worth checking the condition of the fan. Most often the fan starts spinning slower because there is hair, dust, or other dirt on it. Then it is enough to clean the part from the debris. If done periodically, a light cleaning with a toothpick, an old toothbrush or tweezers will help. If the appliance has never or rarely been cleaned, it will be necessary to disassemble the housing in order to do a quality cleaning.

DC motor

The fan rotates rather slowly

As with the previous option, it is most likely due to hair wrapping around the part or excessive clogging of the housing. The appliance should also be cleaned.

It blows cold air

For heating the flow is responsible heating element. the spiral. This part is one of the most vulnerable in the device, especially if there is no overheating protection in the technique. If there is no automatic shutoff when the maximum temperature is reached, you need to know what signs tell you that it is time for the device to rest:

• the occurrence of an odor of burning during operation, which may persist even after disconnection;
• too hot housing during operation, a functioning unit should not overheat.

To solve the problem, you’ll need to disassemble your hair dryer. If a heater rupture has occurred, it is visible to the naked eye. If there is minor damage, the trouble can easily be repaired by joining the ends of the coil and soldering them together. If the gap in several places, it is better to buy a new heating element, the main thing. the same company as the equipment itself.

It is necessary to determine why a part is damaged. If you do not understand the reason and do not eliminate it, the problem will happen again soon.

Disassembling the case

Like any household appliance, a hair dryer one, not quite beautiful morning, stops working. The causes of failure can be different: mechanical impact associated with accidental dropping, or there was a sudden surge in voltage in the network when turning on the device. To find out exactly what happened, you need a partial or complete disassembly hair dryer Philips, which you can do yourself with some skills and know how to repair electrical household appliances.

Very important! Before you start disassembling. unplug the appliance from the electrical outlet.

Most models of hair dryers from Philips company from the Netherlands open into two halves, but to do this you must remove the plastic ring that holds both parts. It has four latches, you need a flat tool. a flat, thin spatula or a sharp, sturdy knife. to squeeze it out. Work very carefully. plastic is fragile, if you break the latch on the repair can be considered complete, you have to go to the store for a new hair dryer.

The Philips Salondry Control and the Philips HP8656 in the Pro Care Ion range differ only in that the latter is a hair dryer, and they are basically the same in principle and design. The Ion at the end of the name means that they have ionization of the air. This function is necessary for “taming” unruly hair. negatively charged ions (ion) prevent magnetization, hair styling occurs without problems.

On the inside of the hood of these models, there are fairly small but powerful latches on the front. To squeeze them, slip the tool between the hood and the housing until a gap is formed between them and pull firmly on the hood. Now it is necessary to unscrew all elements of fastening. there are 8 of them: 2 in a handle, 3 are under a removable part of the nozzle and 3 hold the upper part of the case. Screwdriver must be prepared in advance, taking into account the type of slits on the screws. Philips hair dryer disassembly complete.

To help users will be a video on the step-by-step disassembly of the hair dryer:

Bosch PHA2300 hair dryer brush

DiscountGuide is a service of comparison of in stores, cashback service and help in choosing of goods, by means of selection of video reviews, reviews and comparison of goods. Most of the stores listed on the site provide delivery in Russia, so it is advantageous to use the online order on the site of this store (whether the orders are delivered to your region, you can find out on the website of the selected store). To buy the selected item you need to click the buy button against the selected store and continue shopping on the site of that store. You have to register first and you will get the same amount of money.

Price from 1780 to 3999 at 11 stores

AliExpress is one of the world’s largest marketplaces, offering customers the lowest prices

Brush heads for Bosch hair dryers

Hair dryer head for Bosch styling with clamp model PHA2300/01. Round shape with retractable teeth for automatic curl release Connecting part diameter: 3.6 mm. Length: 165mm. Color: gray

Round Bosch hair dryer brush with retractable teeth for automatic curl release. Diameter: 30 mm Colour: black/silver. Length: 195mm.

Bosch hair dryer brush for volumizing Diameter: 38mm Color: black/silver

Bosch hair dryer volume brush External connection diameter: 39.5 mm Color: gray/silver

The round brush for volumizing your Bosch hair dryer. Color: silver/black Diameter: 20 mm.

Stacking brush with clip for Bosch hairdryers

Round brush for Bosch dryers. Retractable teeth are designed to automatically release curls. Diameter: 30 mm. Color: silver/black.

Extendable bristle brush for Bosch hair dryer

Round brush with retractable teeth for automatic curl release for Bosch hairdryers. Diameter: 30 mm.

Mixed bristle brush for volumizing the Bosch blow dryer Color: gold/black

The ability to dry hair quickly and efficiently makes life much easier for today’s constantly rushed city dwellers. A good quality hair dryer also helps you to style your hair nicely, so that you can turn tousled strands into elegant-looking hairstyles. To create different types of styles, this technique is equipped with all kinds of nozzles.