How to mow with a line trimmer correctly

Waiting for problems with the spark plug

You’re probably familiar with the situation when you pull the starter, but the engine doesn’t pick up and the lawnmower won’t start. No spark. There may be several reasons. Check if it is plugged in (it’s trivial, but it happens). Then you can check the spark plug. Turn it out, wipe it down: maybe it’s flooded or covered with heavy fouling? (By the way, it often happens because of bad oil or because of oil overflow in the fuel mixture.) Check it periodically. and certainly at the end of the season before storing the tool for the winter. There must not be any soot deposits on the spark plug, it must be dry.

If the spark is weak (damp from winter storage or some other reason) or if the spark plug is badly worn and you don’t have a spare, there is a Start Fix spray that can help you start the engine. This is a good thing, it is not only useful for grass trimmer, because it suits for different motors. gasoline and diesel, two- and four-stroke.

A tool for quick engine start will help get you started, even if there are problems with the spark plug

When the grass trimmer does not start because of the spark plug

It may be that you cleaned the plug, but the grass trimmer still will not start. First we check the spark. Disconnect the plug, remove the cap, unscrew the plug.

Then put the contact on, press it to the cylinder and pull the starter. You can see if there is a spark or not.

Disconnect the plug, remove the cover, unscrew it, turn on the trimmer for the grass, connect the wire, put the plug to the cylinder. Photo by the author

I did that once, but I didn’t see a spark. The problem was something else. the vibration had disconnected the connection pins of the switch.

Contacts of the connector are disconnected. Photo by the author

The problem may not be the contacts, but the coil (magneto), which should be changed. And this means that you are likely to go to the service. But, thank goodness, such a malfunction has bypassed me.

Working in wet weather

If you need to mow in any weather, the trimmer should definitely be petrol, because it is quite tolerant of wet weather. Although, according to the instructions, some manufacturers of similar gasoline-powered equipment prohibit working in rain or on wet grass, too. When choosing a trimmer for the grass, it is also worth paying attention to this.

The electric motor is the most vulnerable place for moisture in cordless trimmers. Accordingly, if it is located on top, it is less likely to get there moisture from the grass, but in rainy weather, they also can not work.

Electric-powered grass trimmers are the most moisture-sensitive.

It is common for water from wet grass to get on the extension cord connectors, where an electrical arc can occur that can ignite the insulating plastic or cause a short circuit. Such a defect is “fixed” by buying a new extension cord or replacing the plug, but getting moisture on the motor or control circuitry causes the grass trimmer to fail irreversibly. over, it is dangerous to work with such a tool when it is raining, because there is a big probability of electrocution.

How to mow grass with a trimmer with a metal blade

As you move the edge of the mowed area, also move the fuel and bag.

If the grass is thrown: move the steering wheel forwards, and mow to the left, leaning to the left by the handles (sect

11 o’clock) and to the right with the handles tilted to the right (with the bar

1 hour), and take your time!, in order to mow the grass cleanly and not to “dig” in the ground.

While mowing the grass (and turning around) don’t forget to look around!:

• To notice the gesticulation of others, turn off the engine and take off your headphones,
• To keep children, animals, onlookers, and helpers within 15 m, t.к. When a metal blade hits a stationary object in the grass, the grass trimmer or lawnmower (brushcutter) can swing back or swing sideways, and the grass trimmer blade rotates at up to 10,500 rpm. and it is able to cut off an arm or a leg. Also, when mowing grass with a trimmer, various objects (chips, glass, debris) can fly out and ricochet from under the blade.

How to mow grass with a trimmer (more details about mowing technique)

Engine rpm with trimmer depends on engine load. the heavier the grass and the harder the engine is, the more you need to open the throttle valve of the carburettor diffuser.

Try to maintain constant engine rpm with a trimmer during mowing (a bit higher than average). or less throttle. only depending on the overall load on the engine. You don’t have to fully lower the throttle (and immediately accelerate again) with each swing of the brushcutter. That way you won’t “burn” the clutch, and the edges on the drive shaft may “overtake” it, and the wear and tear of the grass trimmer (brushcutter) will increase sharply.

Before mowing the grass, find out the parameters of the area

(to know what blades to take, how much fuel and time you need)

• grass density;
• the hardness of the grass
• the grass hardness;
• the weediness of the grass;
• (the height and thickness of the grass are not important)
• the boundaries of the area;
• what unevenness (how to go in);
• the presence of hidden obstacles (remember)
• What not to cut (bushes, flowers, seedlings).

Mowing grass in the summer is a disaster, not just a chore of how to use a trimmer. If your yard or area is heavily overgrown with grass, you may be intimidated by it, but this part of the article will help you understand how to mow grass with a trimmer easier and less annoying.

The undercarriage and mowing height

The wheels are an important element of the mower’s running gear. Plastic or rubber rings can be used as tires, less often pneumatic wheels can be found on professional models. Some models have larger rear wheels for better floating over rough terrain.

Almost all ride-on mowers have a height adjustment system. It is not recommended to mow more than 1/3 of the lawn at a time. There are a large number of systems for changing the height of mowing, there are usually 5-7 positions, on professional equipment there may be more.

Lever system for height adjustment

Most models have a lever next to each wheel that lets you choose the height of cut. With a centralized system, all the axles are moved into position with a single lever. On simple electric mowers, the wheels are simply removed and repositioned.

Storing and caring for your trimmer

Gasoline grass trimmers require extra care. In addition to cleaning and lubricating the cutting and rubbing surfaces from plant sap and dirt, care must also be taken of the engine. The air filter clogs most rapidly. Clean it periodically for about 10 hours. In addition, sometimes the ribs of the engine cooling radiator get dirty, causing it to quickly overheat, which can lead to its jamming. How to clean the radiator and air filter is described in the manual on a particular gasoline trimmer.

Before leaving the grass trimmer for extended storage at the end of the season, you should drain all the fuel from it, then start the engine and wait for it to stop. This ensures that there is no fuel in the tank and carburetor. After the engine has cooled down, you need to unscrew the plug, pour into the cylinder 30-40 ml of two-stroke oil, with the starter rope slowly turn the crankshaft so that it is distributed in all the cavities inside the engine, then screw in place the plug. After that, you need to disassemble the boom, if it is dismantled, cover with preservative grease all metal parts that may rust and then store the grass trimmer in a place protected from moisture.

After finishing work with electric trimmers, it is necessary to wipe and roll up the wires and extension cords, and with cordless trimmers, put the battery on charge, as storing the grass trimmer even for a very short time with a discharged battery is not recommended. this leads to a rapid failure. After that you should remove the head, because you will have to clean both the protective cover and the inside of the drum itself. If this is not done, the grass sap can dry out on them and cause the reel with the mechanism that fixes the fishing line to stop functioning properly the next time you start.

Preparing electric grass trimmers for long-term storage is much easier. The main thing is to protect them from moisture in the control circuit and the motor, as well as from rust on unprotected metal elements with preservative grease. Be sure to charge the battery before storage, then your grass trimmer in the spring will be as new.

Choosing the right mowing head

In addition to his product manufacturer usually provides several cutters (usually 3).

• A fishing line wound around a drum is used as a cutting unit for soft grass. With a speed of 9000 rpm even large lawns can be mowed quickly.
• For coarser grass and overgrown vegetation, you can use one of the metal blades, which differ from each other in the number of teeth.
• For mowing thick growth, reeds, young bushes the disc with 40 or 80 teeth is designed. Maize, dry weeds with thick stems can be mowed with three- and four-blade burrs.
• And for laying the cuttings in swaths a blade with 8 blades is used and a special comb is attached to the mower itself.

And now more about how to install the cutter. The attachment point of the cutter is called the gearbox. It should first be secured with a shaped washer using an Allen wrench.

Then put on the knife, aligning the holes in it with the protrusion of the washer. After that, you need to install the top shaped washer on the shaft and tighten everything with the nut.

Here you should pay attention to the fact that the thread on the shaft is left, so you need to screw the nut (as well as screw the mowing head) counterclockwise.

Clamp the nut to the stop will help the wrench, which is also included. You can replace the trimmer by performing all operations in the reverse order.

How to mow with a trimmer with a blade

Have you ever wondered? How to correctly mow grass with a trimmer. No? That’s an interesting question. Let’s find out.

What is a grass trimmer (lawnmower)?

Grass trimmer is the most universal tool you’ve ever had at your disposal. Powerful grass trimmers, popularly called brushcutters, can not only level the edges of your lawn. They can be equipped with metal blades to remove weeds, bulrushes, shrubs, and even small trees.

As powerful grass trimmers cut larger and tougher plants than conventional electric grass trimmers or curved shaft grass trimmers. Their handling and safety precautions are also very special.

So, how to properly and safely mow with a trimmer:

Protective equipment when working with a brushcutter (trimmer)

Tip: This article does not replace the safety precautions in the Instruction Manual. Always read the product manual before use and observe safety precautions.

To work safely with a brushcutter (trimmer), you’ll need:

• Helmet;
• Earmuffs;
• Eye protection (goggles or face shield or, better yet, a combination of both);
• Long, sturdy pants (your shins are in close proximity to the blade or line, so must be protected);
• Safety boots with non-slip soles (preferably with steel toe);
• Soft gloves (for protection and vibration absorption);

Blades for brushcutters (grass trimmer)

When working with a brushcutter we can use the following lines. However, the real advantage (in addition to the high power of the engine), is the ability to be equipped with metal knives.

Different types of trimmer blades are designed to cut different types of vegetation:

• A blade with 8 teeth or less: grass and weeds;
• Knife with 9 to 40 teeth: weeds and bushes;
• Saw blades with more than 40 teeth: small trees and young saplings;

When replacing the blade, be sure to wear gloves.

Each knife shows the size (diameter) of the planting hole in the center. Usually it is 2.5 cm, but cases vary. So look in your owner’s manual for exactly what size is on your trimmer.

How to properly use a grass trimmer with a knife

Regardless of which knife you use, always keep it so that it is parallel to the ground. Adjust the straps so that the grass trimmer sits comfortably in that position, with part of the boom behind the handle resting on the shield on your hip.

How to Use a String Trimmer. 10 Skills to Master

Knives can only be used on a straight shaft trimmer. This means that the blade rotates counterclockwise. And that means it’s best to cut with the left side of the knife and move the grass trimmer head to the left.

If you’re cutting with the right side of the knife (especially the right front side), you might get a bounce (kickout) of the knife, or as the Americans say kickout. Knife rebound (jerk) is a quick jerk or jump of the grass trimmer, as if it hits an obstacle and bounces off. This can be unsafe.

Cutting different types of vegetation

In addition to holding the knife parallel to the ground and cutting thicker thickets with the left side of the knife, there are a few tips to consider for each type of vegetation you may encounter:

Grass and weeds

To cut tufts of grass and weeds, make sweeping motions back and forth in long arcs, as if you were using a scythe. Hold the grass trimmer so the blade just hovers above the ground.

Dense brush

Cutting thick, dense shrubs starting at the base of the plant is not the easiest way. Instead, start by bringing the knife up to about waist level, keeping it parallel to the ground. Lower slowly until the blade is just above the ground. Never lift the blade above waist level.

Small trees and saplings

A grass trimmer with a saw can be used to cut trees up to 2.5 cm in diameter. For larger diameter trees, use a chainsaw.

Hold the grass trimmer so that the blade is 5-15 cm above the ground. Get into a stable position and press the left side of the knife against the right side of the tree. Cut evenly, without pushing.

A lawn trimmer is one of the time-tested tools in landscaping. Its versatility makes it useful for maintenance and work even in the most difficult and inaccessible places.

Love, GardeniumPro and may the Force be with you.

Subscribe to our Telegram to be the first to know about new articles on the site.

Proper operation of a grass trimmer

In every cottage village, in the countryside, in the suburbs and in the city itself you can see these machines: they are working tirelessly, smoothing the lawn, clearing areas of gardens and parks, gardens and vegetable gardens from burdocks of thistles, wormwood and weeds. The noise and crackle of trimmers are heard from early summer through fall, until grass growth slows down so much that trimming is no longer necessary. The automatic grass trimmer has earned its popularity for its ease of installation and operation. It is easy to use, not difficult to maintain, and in case of breakage can not be easily repaired. This article will tell you how to use the grass trimmer correctly.

Order grass cuttings: How much does it cost and where can I find it??

Both companies and private entrepreneurs, as well as various “hobbies” are engaged in mowing the grass.

• the height of the vegetation and the thickness of the stems;
• The possibility of using vehicles for mowing;
• the amount of work;
• terrain;
• presence of stones on the site;
• the time of the work;
• Additional services, such as removal and disposal of grass clippings.

information on who provides these services and their costs can be found here.