What can be used instead of a fishing line for a grass trimmer?

What is a fishing line made of

Nylon (polypropylene or polyamide) is the raw material for grass trimmer line production. strong, lightweight, wear-resistant and inexpensive material. To reduce production costs some producers add polyethylene: such line wears out quicker and is less resistant to overheating. This is one of the key differences between cheap and expensive line of the same kind.

A line with a thick section (3 mm or more) is added with a graphite or steel rod, which increases the efficiency of any type of grass trimmer. Metal base improves aerodynamic properties of the line, so it cuts the stems better. Reinforced fishing line is also found, where steel particles are evenly distributed throughout the string. Adding metal fractions gives fishing line extra strength and durability. Two-piece string is more expensive than conventional nylon, but it is mainly purchased for specialized street improvement work, such as utilities.

How to store fishing line correctly or prolong its working life

Many people give advice on how to choose a line for your grass trimmer, but almost no one tells you how to store this material. Improper storage leads to the fact that the equipment quickly wears out when you cut the grass. When you buy a 15-meter coil, then the question of how to store the line for trimmer grass, only a few people ask. When you buy a coil of 250-500 meters, then it is very important to understand the observance of its storage conditions.

What happens if you do not observe the conditions of storage of nylon line for grass trimmer? The consequences are as follows:

• Loss of its properties, so high-strength material makes tooling brittle and quickly wears out
• The performance of the work decreases
• Accelerated wear and tear leads to the need to buy and tuck the string into the grass trimmer more often

The loss of the initial properties of the fishing line is definitely not a pleasant phenomenon, so let’s find out what to do to increase the service life of the material during its storage. Nylon material is most susceptible to the effects of ultraviolet light. The longer the cords are exposed to the sun, the quicker they lose their technical properties. Instructions on how to extend the life of your grass trimmer line are as follows:

• At the end of the season, when a long break is taken, the fishing line should be wrapped in polyethylene and soaked in grease (glycerin) beforehand. Densely packed and soaked in grease fishing line, should be stored in a dark place at a temperature of 5 to 20 degrees (preferably in the refrigerator)
• Do not store cord on radiators or radiators, as excessive exposure to heat leads to disruption of technical properties
• To avoid the light hitting the line completely, it should be wrapped in black polyethylene instead of transparent one. Special plastic airtight containers can be used instead of a bag

When the season arrives, you need to take out the coil, and winding off the necessary amount of material, wipe it clean of grease, and load it into the grass trimmer reel.

How to wind a fishing line on a grass trimmer reel

The line in the trimmer head can run out at the most inopportune moment when work is in full swing. To avoid time-consuming and time-consuming explanations of the instructions, we recommend that you familiarize yourself with the process in theory beforehand. In our article you will learn all the subtleties, from the choice of consumables to the winding of different types of spools.

How to correctly change the line garden trimmer for grass on a steel cable

Receive by email once a day, the most read article. Join us on and

Trimmer for grass with a weak motor is often hardly able to cope with a dense lawn, what to say about trying to cut real weeds. This state of affairs will not make any owner happy, and will even be upset by the fact that the purchased device turned out to be absolutely useless for the household. Caught in such a situation, do not despair before time, because it is possible to carry out a simple modernization of the grass trimmer, which will significantly increase the effectiveness of its work.

So, to carry out the modernization will need only nothing, namely: a rubber sleeve, trimmer for grass, a set of standard tools and, of course, a steel cable to 2 mm with thicker strands. Installing the cable begins with dismantling the grass trimmer reel. After that, you need to measure and cut the cable so that it will not hurt during the work of the trimmer for the grass. Then the cable is unbent with pliers and bent in the middle. This should be done so that the result is a small loop.

In the resulting loop, a pre-prepared rubber sleeve is inserted. It must have a slightly larger inside diameter than the shaft of the grass trimmer.

Note: if the bushing is missing, in the most extreme case it can be replaced by wrapping electrical tape around the hinge. You should understand, however, that such a system will not work faithfully for a long time, soon enough it will have to be repaired by rewinding the tape. Otherwise, the grass trimmer can become dangerous!

Now you need to tighten the sleeve by winding the loose cable back up. To be sure, you can secure it with a wire tie. After that, it is tucked into the base of the head, the sleeve is put on the shaft. When all this is done, you just need to close the cover.

What’s the result: grass trimmer equipped with a cable will confidently cut even dense greenery, weeds and bush branches.

How about an even tougher upgrade, here’s a story on how to swap the line on a saw blade.

Grass trimmer upgrade: how to swap the fishing line for a saw blade

Receive one of the most read articles in your inbox once a day. Join us on and

So, in order to make an upgrade to the grass trimmer, it is necessary to pick up a suitable diamond saw blade from the TST series. These blades are designed to work with plywood and wood. The blade should have the following specifications: outside diameter at the tops of the teeth. 216 mm, number of teeth. 48, the landing hole. 30 mm. Included with the disc must be three rings with the same outer and different inner diameter. They are needed to compensate for the difference between the seating hole and the counter element on the thrust washer.

Install the diamond disc on the grass trimmer is not at all difficult. This operation is no different from the installation of any other attachment, except that increased attention and accuracy should be shown. First you need to remove the spool of fishing line by blocking the reducer shaft with a pin. The fishing line container should be rotated counterclockwise. Before installing the saw blade, make sure that the hole is larger than the diameter of the washer.

After that you should try on the compensating washers one by one and choose the one that not only fits the width, but also completely selects the gap between the centering belt of the lower washer and the saw blade seating. On the gear shaft the lower washer with the expansion ring is installed first, then the diamond disc, then the upper washer, and only after that the protective cup is put. Do not forget to tighten the whole package on the gear shaft with a nut.

Grass trimmer line rating 2020. Which one is better??

It’s no secret that the process and the result of mowing depends not only on the grass trimmer, but also on the fishing line. One copes with burdocks, but tears the lawn grass, the other perfectly even cuts young vegetation, but absolutely not suitable for dead wood. And sometimes you buy the cord you need, but it’s nothing but disappointment? Here is a tutorial on the intricacies of trimmer line selection and five popular brands.

What shape to choose a fishing line?

What line to choose for a grass trimmer, given the variety of shapes of its section? Consider what form for what type of work is suitable:

• Round solid line. The most popular form, with which you can mow, both thin grass and thick. On durability it is not inferior to other types, in some cases consumes even slower than pentagonal or square. It is also cheaper than others (for the same cross section). But it is less good at cutting up thick weeds and is noisier to work with. Although if you work with a gasoline trimmer, then the noise of the line does not play a special role, because its engine is louder. A round solid line is right for you if you mow soft grass or the lawn most of the time. The inexpensive Siat Professional with a thickness of 1.6 mm.

• Twisted round (twisted rope). It mows just as well as a solid line, but it is less noisy. All other things being equal, it is a bit quicker than a solid mower, and has a poorer tolerance for stones and other hard objects. You should buy twisted rope for electric trimmers. Bosch F016800431 is a prime example of such a twisted nozzle.

• Triangle. It has three sharp edges, which handle thick stems better than a round head. The triangles are less often available on the market and cost somewhat more than the round line for the grass trimmer. Which is better? It all depends on how overgrown your site is. If you mow regularly, the round line is better. For the thin triangles we recommend Archimedes.

• Solid and twisted square. A square string is much better at dealing with thick weeds and small growth than a round or triangular string, but it also costs more. The solid square is superior to the twisted one in terms of flow rate, but it is also noisier (which is important for electric trimmers). For infrequent mowing you can take an inexpensive Chinese square twisted nozzle Elitech 0809.006200.

• Pentagonal (star). Star is the most popular “faceted” line for controlling brush and small brushwood. Also, unlike the square and round, it cuts the fresh grass more gently, so it does not dry out (meaning the remaining stems). But it tears quicker when hitting stones than a round or a square one. The pentagon mowing head is only worth buying if your land is perfectly flat and free of stones and debris. Then the flow rate is minimal and the cutting quality is top notch. From inexpensive, we found Huter S20. a German brand, but made in Sweden.

• Hexagon. Hexagonal is the best line for grass trimmers if you want to mow dry grass. Of course, if you have thick dead wood, we’d recommend a power tiller, but if there’s not much vegetation, a hexagon will do a better job. In principle it has the same properties as the star, but costs a little more (with equal cross-section in the range of one brand).

To summarize, we note that for regular grass mowing (at least once every two weeks) it is best to take a round solid or twisted nozzle. If the plot is thick weeds, then a square or hexagon will do. And for less drying of the lawn, a star will be better.

Before you start making a homemade cord, you need to prepare the material itself, namely plastic tape of the required width and length. To dissolve a PET bottle on a ribbon, use a variety of devices, the algorithm for making which can be found on the Internet. If you are going to mow large areas overgrown with grass and need a lot of homemade cord, it certainly makes sense to make a more complex bottle cutter from an angle or U-shaped aluminum profile. The process of making a bottle cutter is shown in this video.

But if you are not interested in mass production of plastic tape, then on occasion you can dissolve a bottle into strips in a simple way.

Can you cut grass using Fishing Lines?

• Take a normal PET bottle cap.
• Cut it in half (but not all the way through).
• Remove any beads that are inside the cork.
• Fold the cut cap in half and pierce it with a knife as shown in the picture below, being careful because plastic is very hard. The tip of the knife can be heated to make the process easier.
• Use scissors to cut the bottom of the plastic bottle (as flat as possible, without jagged edges). Insert the bottle into the tool on the side where the knife blade is sharpened, and begin to plunge into it a little at a time. When a small strip appears. just start pulling it.

That way, the entire plastic container will dissolve into ribbons of equal width.

A -sized version of this bottle cutter, which you will always have on hand, can be made from an ordinary pencil sharpener, preferably made of aluminum. How to make it is shown in detail in this video.

Self-made nozzle on the weed trimmer, which is better than the reel of plastic

The large overconsumption of line in this application negates the usefulness of the design

If the same line is inserted, from what works longer? The main thing is to lubricate the gearbox in time with refractory grease. There will be vibration with consequences. In general, about nothing. The body itself rarely breaks (I mow the grass 15 hundred square years already two years, has not broken yet).

Don’t be fooled, now there is a factory design on saleThe design is great, I’ve been using it for over 3 years.The main thing is to lubricate the gearbox with some tight-friction grease.Victor.

The problem is that the “gasoline mower” people have not invented fools My friend also decided to save money and removed a Japanese car some sensor that turns off the rear-wheel drive as a result, changed the box and the engine! It’s the same with the head. Tested!))

Take an ordinary hex nut, and what’s not an ordinary nut with a left-hand thread

The head is lightweight. by using impact-resistant plastic. 2. The original head is self-adjusting. That is, the line is not inserted in pieces, but with a spool, and when the head hits the ground, the line is released as it shortens (flow). 3. A thread on the trimmer is not left, by any chance? To prevent the head from flying off during operation? Complete suck, to say the least

A special washer do not buy a fate Stavlyaet fishing line 4 mm. I recommend.

And the grass trimmer is made from a ski pole and meat grinder. The DIYer is not bored with his hands

♪ Wiped out a little bit of the umbilicus ♪.Drilled through, put a bolt with a washer, a nut inside.I have to pull the line out with my hands, pushing on the former umbilicus.But it saves line, the line does not fly out on a bump.

once bought the trimmer for the grass factory nozzle removed and put it in memory instead took a 3 mm plate length of 10 cm calculated its center, drilled a hole with a diameter equal to the hole in the nozzle. sharpened the opposite edges for the knife. I put on the grass trimmer, running, adjusted to the absence of runout on the emery. drilled three holes of diameter 4 on each end.5 mm (for any line). 12 years in operation. Chops thin twigs, just need to get it under the knife.The line consumption is considerably less than with the factory-made nozzle.Protection set at a distance from the blade to be convenient to work depending on the purpose of work.Including weeding.it’s not as clean as a hoe, but it’s faster and my back doesn’t hurt as much. The three holes provide the strongest lock for the line. Good luck.

Yeah, well, how’s that better than a spool?? to stop every five meters to muffle the trimmer and insert a new? It’s easier to wind it on a spool and mow for a long time without worrying about anything.