Which cutter is better ceramic or carbide

Cutters for gel nail polish removal. Which is better, nail treatment

Cutters are special tools that are used for removing gel nail polish, processing cuticles and rollers. They greatly simplify and speed up the work of the master, but require special knowledge. These nozzles differ in size, shape, material and method of work.

Cutter is a special nozzle that is inserted into a manicure tool. With the help of regulating the revolutions on the machine, the master removes gel-lac before the subsequent coating or performs a manicure.

The advantage of using a cutter is that it does not damage the nail plate, provoking its desiccation and stratification, unlike the means for removing gel varnish. But when using a mechanical tool, there is a risk of making a kerf and causing damage to the client’s nail.

The machine removal of the colored coating lasts 10-15 min. Total on all nails, depending on the skill of the master. The procedure does not cause discomfort or pain, you can feel a slight vibration on the nail plate. As a rule, during the removal of the coating, the master leaves the base to strengthen the nail.

Among the disadvantages of the method are:

  • It is difficult, and often impossible, to treat a sensitive nail plate or one that has significant damage;
  • the high cost of a quality cutter and attachments. Cheap models often perform poorly, often break down, and may not meet stated specifications;
  • Cutter cannot be used with customers who are allergic to dust;
  • Mills with low revolutions when removing gel nail polish can heat the nail plate, which causes inconvenience to the client.

Cutters are available in different lengths and diameters. Each of them has its own nuances of work.

Cutter types

Depending on the material from which the cutter is made, the tool can be ceramic or with a metal base. The first option is cheaper. Cutters also differ in hardness, which is indicated by the marking on each instrument.

The information is presented in the table:

Color Stiffness Use Abrasiveness
white the softest nozzle for work with sensitive skin or for correction of small defects of the nail plate up to 5 μm
yellow soft nozzle Recommended for work with natural nails, but also for sensitive and thin skin of the client 15 μm
red soft nozzle For manicures or sensitive nail plates 30-50 μm
blue Medium hardness These cutters are used to perform manicures. They do not work with the nail plate. Rarely used for soft-coloured coats 90-125 μm
green hard designed to remove gel nail polish or rough coating (acrylic, gel, acrylic). Not suitable for clients with sensitive skin or excessive sweating 125-181 microns
black The toughest cutter the technician works only with artificial nails 1 strip.300 microns, or 2 strips. 500 microns

Important! Cutter speed depends on the material it is made of. If the recommended number of revolutions is exceeded, the head deteriorates and becomes unsuitable: it bends, starts “beating” and does not fulfill its function. The following rule applies: for a larger diameter of the cutter, lower revolutions are included.

Metal

These products are made of carbide or tungsten. Steel cutters are not used for removing gel nail polish. They are used for treating rough cuticles and removing pterygium in pedicures.

  • Excellent to cope with blisters;
  • do not rust during operation;
  • It is possible to disinfect with chemicals;
  • Remove a layer up to 1 mm.

Disadvantage of the product. if the allowable number of revolutions is exceeded, there is a risk of injuring the client or damaging the pin of the cutter. Speed of operation. up to 15 thousand. rpm. Durability. 6 months.

Carbide

Cutters for the removal of gel nail polish of this type are made of metal and have notches on the surface. The stiffer the burr, the deeper the notch. Accordingly, the roughest tool leaves a roughness (notches) on the nail. Cutters can be with straight, oblique, spiral notches.

Tool advantages:

Speed of work. up to 15 thousand. rpm. Life time. up to 4 months.

Ceramic

This cutter is made of ceramic, it has different depths of serrations, and comes in soft, medium and hard. It can also be shaped like an oval or cylinder. Care is required during use, as the cutter can fall and crack or a piece can break off.

which, cutter, better, ceramic, carbide

Benefits of use:

  • long service life. Ceramic bits can work 3-4 times longer than metal ones;
  • Softness during gel polish removal. The ceramic tool vibrates less, which makes the work enjoyable, and the amount of negative feelings of the client is reduced to a minimum. During sawing produces fine dust, no large particles. shavings;
  • less heat. With a ceramic cutter the technician can remove colored coating at high speed, without interrupting the cooling of the nail plate.

Disadvantage: high cost. But it is compensated for by its long service life. Speed of operation. up to 20,000. rpm. service life. 2 months.

Corundum

The cutter is made of a synthetic material that looks like ceramic chips. Heat resistant, does not warm up in use. On corundum nozzles are not marked on the degree of abrasion, so you need to be careful in selecting.

  • the wide and coarse abrasives are used for large areas of treatment and to prepare the nail for extension;
  • tapered with small abrasive. used for rollers and thin cuticles.
  • the possibility of careful treatment of thin cuticles, because the cutter belongs to the class of grinding;
  • multifunctionality. The nozzle can be used not only for grinding, but also for cuticle treatment, length and shape correction, removal of detachments;
  • durability. material is temperature-resistant, so it is resilient and does not warp
  • hypoallergenic;
  • can be used for removing calluses.

Different shapes of cutters

Cutters contribute to the following procedures:

  • removal of gel varnish from the nail;
  • Nail polishing;
  • Treatment of lateral rollers;
  • cuticle removal;
  • foot recovery;
  • Gives the nail a nice curve.

According to the shape of the nozzles are divided into types:

Shape Description
Spherical Used when hands are to be rid of excess skin. Its shape makes it easy to remove rough skin on hard-to-reach areas
Cylindrical Corrects the shape of the nail. Thanks to the narrower nozzle body, it is possible to shape the nails to the same length and width
Fissure Suitable for use on the lateral concave. Smooth skin surface without flaking is achieved thanks to the cutter adapts to the relief of the epidermis
Needle-shaped Facilitates work on the cuticle. It is a cutter for precise and accurate processing of all details

Classification of cutters according to intended use

The jigs vary in size, which indicates their function and range of application:

  • The large ones are for rough and wide skin areas;
  • medium. in the areas around the nails;
  • Miniature. for working on brittle nails and sensitive skin areas.

Lifting the cuticle

This is the initial stage of the job, for which the best choice is the nozzle with a rounded or slightly blunt end. Experienced craftsmen recommend a cone (truncated, if possible) and a cylinder as ideal shapes for the function.

Opening the cuticle

To open and lift it, the fissure diamond nozzle, which has a rounded end, is suitable. Bullet, lentil and flame nozzles are also useful in this case.

See also  Which Gasoline To Pour Into A Husqvarna Chainsaw

cuticle removal

The ball bit is ideal for this application. To start working with it, you must first open the cuticle. This allows the cutter to slide in and out of the cuticle, and with light pressure, the cuticle is cut.

All movements must necessarily have a direction from the inside out, taking into account that in no case can you rub in one place for too long: this will lead to a wound or an unpleasant burning. When the diamond ball is finished, it is the turn of the corundum ball to grind not only the cuticle, but also the lateral rollers.

Sometimes the cuticle is removed with a diamond cylindrical nozzle that has a rounded end.

To remove gel nail polish

The best use in this case is a ceramic nozzle, which has a blue marking or a carbide nozzle with a red marking. The shape does not matter, the main thing is to make it comfortable for the technician to use. Choosing the right tool will make hardware gel nail removal process reliable and effective.

To shape the nails

For this purpose, it is best to use a ceramic cutter that has the shape of a truncated cone. It is important to choose the grit size.

For polishing and buffing

Special cone-shaped polishing nozzles take part in this process. They are made of cotton and felt, as well as silicone. Their soft texture makes it possible to polish the nails up to a shiny surface.

Silicone tips are considered the strongest, and are usually used until the surface is completely abraded. Sterilize them easily. It is not allowed to polish a nail with one and the same nozzle: masters line them up according to the degree of hardness: from hardest to softest. Polymer coating allows to make the nail glossy.

Classification by hardness and color

Types of manicure cutters usually do not have a certain color: it is insignificant unlike the ring that is located at the base of the nozzle. it is always colored in a certain color and indicates the degree of hardness:

Color Abrasiveness Purpose
Yellow Extra fine For working on thin skin, correction of thin nails
Red Fine For improving the lateral rollers and medium thickened nails
Silver Medium
Green Large
Black Extra coarse For hardened toes (primarily for pedicures). They help to shorten dense nails and manage calluses

Materials: comparison, pros and cons

Ceramic

which, cutter, better, ceramic, carbide

They contain corundum particles. They are very fine, so this type of cutter is best suited for delicate applications. They have a unique self-repairing effect and are ideal for allergic persons, without causing a negative reaction. Ideally, they are used to treat pterygiums and cuticles. On average, 1 ceramic nozzle lasts about 2 months.

Corundum

Made of synthetic ceramics, slightly resembling acrylic, which gives the nozzles a non-rigid structure with no corners or hard edges. They facilitate gentle removal of sensitive skin, without leaving scratches.

The material does not induce tissue flaking, so it is better to work on the side areas around the nail with this attachment. Will last about 3 months.

Diamond

The universal type, thanks to the diamond dust. It works on skin that has a high or medium-hardness level. If you need to perform a treatment that requires maximum precision, this precise cutter will be effective.

The work with acrylic nails (correction, design, extension) is performed with nozzles, which last for about 3-4 months.

Steel and carbide

Types of cutters for manicure Carbide are used on manicure nails, for natural nails such a nozzle will be traumatic.

This is not the only function of such cutters, they are:

  • They help to make wells for rhinestones and piercings;
  • Effective with ingrown nails and corns,
  • last 4 months with active use.

Steel cutters are handy for removing loose nail layers or working on hardened skin. The tools are made of high quality alloys, they correct well the false nails and corns. Lasts six months.

Combination

Silicon carbide cutters seem rough at first glance because of the material, but are gentle on rough skin. Durability approx. 6 months.

Silicone

It is silicone to which abrasive particles are added. Usually not applicable on natural, only on extensions when you need to remove the glossy layer. Depending on how actively you use them, they can last anywhere from 4 to 5 months.

Garnet

These products are made of pomegranate rock. Suitable for thin cuticles. Life span of 3 months.

When choosing cutters, you must take into account how you will disinfect them. No need to think that if you use the machine alone, you do not need to clean the tools after work. That’s not true. Each nozzle has a specified life, the manufacturer writes for how many sessions and at what speeds the cutter is designed. Neglecting cleaning can shorten tool life by up to 25%. And it’s very unpleasant when you take the machine, and instead of diamond tip. a bare, peeled rod.

Ceramic cutters from the manufacturer Feecy are softer than diamond, the cost per tip from 25 to 100 The cutters are suitable for hard nails, cuticle. You can easily use the nozzle for home pedicure, the cutters are good for removing rough calluses and scraping corns. For a step-by-step pedicure for beginners, see here.

It is better to avoid carbide or metal cutters for beginners. This is a professional tool with a fairly coarse surface, even with a fine abrasion. One wrong touch and you make a kerf on the nail, which will be a long time to heal and spoil the shape of manicure.

Silicone, plastic cutters are used only once in the salon. For home use, you can take a set of silicone tips that can easily grind the nail plate.

Diamond cutters from manufacturer Aprith, costing from 150 for a basic set of 7 tips are ideal for nail grinding, cuticle treatment and nail shaping. The kit includes nozzles of different hardness. Cost of a set for masters of 24 nozzles to 500

Top 5 nozzles a beginner should have

If you are just beginning your introduction to hardware manicure and pedicure, purchase a basic set of five cutters with which you can create the necessary shape and thoroughly treat the nail and skin around.

Diamond or metal Corners with red notches

“Use it to remove nail polish and trim the sides of the nail. Cutter has a rounded shape with a pronounced “belly” and a rounded tip. The nozzle does not heat up when in use. It is necessary to work with it at 20-25 thousand. The cutter has a rounded “belly” and a rounded tip, and you can reach full speed by selecting FWD mode.

Beginners are recommended to buy 1 “Corn” with diamond coating and 1 carbide.

Flame with red notches

One of the main cutters a beginner needs. Use it to remove the artificial layer, clean excess pterygium. It should be used with the device turned on at 15-17 thousands rpm. revolutions. It needs 10-15 cutters.

“Ball” with red notch

Use the ball cutter to remove rough skin around the nail, cut the cuticle). It should be used with care not to press too much on a nail, it’s very easy to get kinks and spoil a natural nail.

Use the “Ball” cutter from bottom to top. 15-20 thousand rpm is considered the best. revolutions.

Silicone cutters

The soft nozzles are used for grinding and polishing the native nail. Use the cutter at the lowest rotational speed, with a few swipes upwards over the nail. 3 to 5 nozzles are enough.

“Barrel

It is very convenient to shape the nails, cut the cuticles and remove the callous skin. The barrel is convenient and quick to do a pedicure and foot treatment. Operates the nozzle at a speed of 15k. rotations.

What cutter shapes are available

The following are the most common shapes of cutters for manicure machines:

Cone nozzle. Used for treatment of the area between the skin drum and the nail plate.

Truncated cone. Designed for processing the free edge of the artificial nail and giving the shape. Cone round nozzle. Used for treating rough foot skin.

Cylindrical. Universal nozzle for working with skin and nails.

Ball nozzle. Designed for hard-to-reach areas of the nail plate, and for removing corns.

See also  Metal beveling cutter

Reverse cone. Allows treatment of the free edge of the nail and the callus.

How to choose a cutter for a hardware manicure

Any interchangeable nozzle, whether cylindrical, cone-shaped or fissure cutter, is used for a specific job. Both its shape and the material from which the tool is made play a role.

For example, a spherical cutter, depending on the degree of abrasion, can be used both for the treatment of rough calluses, and for the careful removal of cuticles or delicate grinding of nails. When choosing the right tool, you should consider the peculiarities of the nails and skin, as well as your own experience in the technique of manicure apparatus.

Nozzles for novice masters

To choose the right tools, you should take into account the basic steps of manicure, without which it is impossible to accurately nail-art. Beginners are limited to the bare basics:

  • Ceramic cone or corn cutter with shallow serrations. They are useful for sawing extensions, grinding dense surrounding nail rollers, as well as help to solve the problem of ingrown nails;
  • A thin fissure cutter that can clean the areas under the lateral rollers;
  • Cylinder, which serves to correct the shape of the free edge;
  • a rigid carbide ball cutter for safe and painless grinding of rough calluses and corns;
  • Universal cutter polisher for gentle and delicate nail polishing. The tool must have low abrasivity and be made of corundum or silicone.

Cutters for professionals

With the acquisition of experience, manicure masters master the devices, which in the wrong hands can harm fingers and nails.

Diamond burrs with different ball diameters and grit sizes are ideal for removing callous cuticles, smoothing the nail bed and polishing hard corns. Professionals work with such tools with pleasure, but beginners should refuse them in the first months of work: it’s very easy to hit a nail hole with a spherical cutter and traumatize it.

Skilled nail technicians also like silicon-carbide and ceramic cutters, which resemble a corn cob with big jagged edges. With insufficient skill it can easily damage the nail, and a cheap machine with low power can cause heat and strong vibration of the tool.

Hardness of the product

Cutters are usually classified according to their abrasiveness, and for a quick determination of hardness, they use colored bands at the bottom of the nozzle. The darker the color, the more abrasive the tool has.

Very rough carbide cutters, which are used for sawing off artificial coatings, are marked in black. With natural nails and skin such samples should not contact, and they can be used only by experienced professionals.

Green-coloured notches indicate a high degree of abrasion. Such a tool can be used to remove gel nail polish or to treat rough skin areas.

The blue tips are the most commonly used. These are soft and medium-hard tools for cuticle and lateral roll work.

Tools with red marking refer to rather soft samples, with which you can safely polish both skin and natural nails, if the plates are strong enough and solid.

Yellow color is an indicator of minimum abrasion. Removable elements with yellow trim are considered the most comfortable and harmless when grinding the nail surface.

Nozzle materials

The removable tips for router bits are made of different materials, which affects their rigidity and scope of application.

Diamond specimens with natural or artificial coating are some of the most popular ones. They are precise and capable of performing many tasks, from the treatment of the peri nail rollers to the correction and removal of artificial nail coating.

Carbide tips made of tungsten and carbide have a long service life. up to five years. Their abrasiveness is determined by the size and depth of the serrations, but with any size of serrations the material remains quite hard, so it is usually used in the work with false nails, and in some cases. to eliminate hard corns or solve the problem of an ingrown nail.

Ceramic tools are convenient because they are slowly heated and can be used for various purposes: grinding rough skin on the feet, treatment of areas adjacent to the nails, removing pterygia and polishing plates.

The main advantage of corundum tools is the absence of sharp edges and protrusions. Due to the rather soft structure of the ceramic crumb that covers the cutter monolith, corundum parts are suitable for manicure on hands with delicate and sensitive skin.

Silicone polishers are required for the final sanding of nails. They can give nails an attractive shine or prepare the surface for coating with gel-lacquer or acrylics.

Different shapes of cutters

Cutters are divided into categories according to their shape:

  • Balloon devices will be needed for the delicate removal of excess skin. This shape allows you to remove rough skin in hard-to-reach areas of the nail bed.
  • Cylindrical cutters are used for correcting nail shape. Their narrowed body allows nails to be shaped to the same shape and length.
  • Fissure cutters are indispensable for work with lateral rollers. They are adapted to the relief of the skin, which allows you to get a smooth surface without flaking.
  • Needle-shaped cutters are necessary for the cuticle area. They allow precise work with high precision, even on small details.

Cutter classification according to application

Cutter name Purpose
Reverse taper Needed for free nail edge treatment. It can be used to trim nails to one length, without leaving any jagged edges or irregularities. This nozzle helps level the tip of the nail, smoothing out height differences.
Ball-head bur Designed for treatment of the skin around the nail. Thanks to its ball-shaped cutter, it helps to remove rough skin without damaging the nail plate. Indispensable for removing burrs and cracks.
Cylindrical nozzle The nozzles in this shape can be either fine or wide. They are used for removing gel nail polish and correcting nail design. In addition, they are most convenient for shortening the length of the free edge of the nail.
Drum Allows you to remove calloused, rough skin. It can be used to trim thick nails. It is also used for appliance extensions.
Polisher This nozzle resembles a rounded cone. It can be soft, medium or coarse in hardness. The tip is made of plastic or plastic-coated silicone. It can be used for smoothing the roughness on the nails, giving brilliance.

The hardness of the burrs can be easily identified by the color code. The color of hard drills is always darker than the soft ones.

It is customary to distinguish cutters by shade:

  • Black and blue highly abrasive nozzles are used for treating rough and thick areas of skin, removing calluses, and shortening a tough nail plate.
  • Green and red medium abrasion nozzles can be used to work on side rollers and nails that have medium density.
  • The yellow, low-abrasion nozzles are designed for thin, sensitive skin with nearby blood vessels. They are used to correct thin and brittle nails.

What cutters are needed for a hardware manicure

If we consider removable nozzles in terms of material science, they can be divided into:

And in order to choose a tool for a specific cosmetic procedure, knowing just the materials of which it is made is not enough. It is important to understand what the cutters are used for.

Purpose of cutters for a hardware manicure

Diamond cutters due to their physical properties are used by masters of manicure during work with the delicate cuticle, fragile nails, and when it is necessary to clean off pterygium (a thin layer of cuticles, which are directly attached to the nail plate). But diamond also has abrasiveness, the degree of which can be easily determined by the color of the nozzle:

The ceramic tips are designed for both home and salon use. They are softer than their diamond counterparts, making them good for hard nails and cuticle removal, as well as for removing hard epidermis or calluses.

Metal cutters. the choice of true professionals. Since they are made of strong surgical steel alloys, it is common to use them for work on cuticle and lateral rollers.

Combination, silicone and plastic. usually inexpensive cutters for single-use. They do not require special storage, disinfection or sterilization. But in the disposable purpose and hides their flaw: if the client flow to the master of manicure is constantly filled, economically more profitable to get a full tool of reusable. On individual products can simply lose a lot of money.

See also  How to work with a wood sander

One of the best representatives on the market are cutters produced by Stalex LLC, which has been producing manicure tools for more than 17 years.

How to disinfect and sterilize cutters?

Manicure is a procedure that requires special safety measures. This is especially true for reusable tools, including steel cutters. After all such diseases as fungus, infectious subnail panaritis, or more serious. viral hepatitis B and C, HIV. can easily be transmitted from client to client if the nozzles were not properly disinfected after use.

Sterilization implies the total elimination of bacteria and their more resistant spore forms, fungi and viruses. That is, in order to destroy all flora, you need to regularly disinfect and sterilize all metal working tools.

Depending on the material of your drill, the disinfection process differs.

Metal cutters

If the nozzles are metal, disinfect them from a practical point of view first in special solutions with an exact account of their concentration and exposure time (soaking). This is dictated by practical aspects. high temperatures can deform and blunt the sharp edges of cutters.

The next step is to rinse them with running water to remove residual disinfectant. It is advisable to store sterilized instruments in a special ultraviolet cabinet prior to direct use.

Configuration

When considering which milling cutters are required, it is worth taking a look at the different shapes, depending on the characteristic of the configuration. The shape of the working part can be very different. This determines the field of application of the tool. There are the following varieties of cutters:

  • Boron. This cutter removes the ingrown skin around the nail plate.
  • Cylinder. Allows you to create the desired shape of the cut. It can be oval, pointed nail. It is also easy to make a square shape with rounded or right angles.
  • Fissure configuration. Distinguished from other nozzles by its pointed shape. This tool is used for grinding.
  • Needle-shaped. Needed for processing the cuticle in the corners of the nail, as well as the dead epithelium in hard-to-reach areas.
  • Conical (reverse). Used during the creation of a pedicure. This type of nozzle allows you to cut rough skin on the feet, calluses and other defects. With this attachment, you can remove excess nail length without manicure scissors.

Considering the types of manicure cutters for beginners, it should be noted that some of the listed nozzles can replace one another. In addition, instead of a needle-shaped tool, you can buy a variety of ball-shaped tools. It is also called a flame-shaped nozzle. With its help, you can remove the cuticle, freeing the nail from the overgrown, ugly skin.

The sale also includes a bullet-shaped cutter. Use it to polish the skin around the nail plate.

Experts note that for home use is not necessary to purchase a complete set of cutters. It is enough to have in your arsenal a few basic varieties. They can be used to perform all phases of the manicure. Over time, the nozzles will need to replace. This should be done at intervals of every 3-4 months.

How to choose a cutter for manicure?

Bory nozzles of each shape are made of different materials, differ in hardness, size of incisions, diameter and other criteria. Before you choose a cutter for a hardware manicure, it is better to decide on the upcoming tasks, and to collect a high-quality working set. You should not buy all possible types of nozzles, some may not be needed at all.

Cutters for removing gel nail polish

The appliance method is considered the most non-traumatic and effective way of removing the coat. Manicure cutter does not loosen nail plates and does not damage “live epidermis, does not cause dryness and cracks like when using removers and saws. Each master has his preferred attachments that remove gel polish. The following manicure cutters are often used for this purpose:

Cuticle and lateral files

“Precise” nail work involves complete removal of excess skin, including pterygium. Before this, the cuticle must be pushed away with a pusher and lift. This is done through the nozzles “flame”, “needle” or truncated cone. After lifting, the spherical cuticle removal cutters are used. They are also very handy for filing and buffing the lateral camber. Some masters additionally use a cylinder, mostly rounded.

A safe cutter for manicures

Any nozzle, if used incorrectly, can cause damage or injury. The safest cutters for manicure. soft, with yellow and red notches, especially ceramic. Tools with these parameters are recommended for use by beginners in training and in home nail care. To manicure cutter was safe, you need to monitor the technique of work, the position of the nozzle and the angle of its application to the surface. An important point. regular and quality sterilization of equipment.

The best cutters for a manicure

High cost does not always indicate a decent quality of the product, there are companies that produce affordable and durable nozzles. Before you complete a personal set of cutters for manicure, it is better to get acquainted with the certification of goods, warranty periods. It is not superfluous to read the reviews of masters on the selected positions. The best manufacturers of cutters for manicure:

  • Irisk Professional;
  • Naomi 24;
  • Magic Bits;
  • JessNail;
  • HDFreza;
  • TNL Professional;
  • RuNail;
  • Barrel Ball;
  • Planet Nails;
  • Mühle Maniküre.

How to take care of manicure cutters?

In both home nail work and professional work, it is important to properly clean and sterilize tools. Manicure cutter care involves:

  • Disinfection. To remove residual biological material, viruses, bacteria and fungi, the instruments must be soaked in a special solution with cleaning agents and lye. Actibor, Mistral, Multidez will do.
  • Presterilization cleaning (PSR). Removal of soaked skin and nail residue is done with a nylon bristle brush. The cutters are then rinsed under running water and dried (on a cloth at room temperature or near a warm air source).
  • Sterilization. Either an autoclave or a dry-heat is used. The first device. expensive equipment, so it is advisable to buy it when earning a manicure. The dryer is affordable, and can be purchased for home use.

When to change manicure cutters?

Recommendations for care and maintenance are often included in the instructions to the machine or a set of nozzles. Shelf life depends on the material of manufacture, product quality, intensity and frequency of use, the speed at which the manicure cutter operates. Some burs will last a few weeks, others up to 5 years. Manicure nozzles for the router are replaced as standard according to the following rules:

  • Abrasive (sand) caps. disposal after use;
  • soft materials (felt, fabrics). by degree of wear;
  • Silicone cutters. 2-3 years;
  • ceramic. 3-4 months;
  • Corundum. 6-8 months;
  • diamond. 2-4 years;
  • metal. about 5 years, sometimes more.

To master the hardware manicure step by step for beginners is easy, if you carefully study the theoretical part, and a few times to practice. It is important to buy quality equipment and remember the basic rules of the procedure.

Permanent nail polish. a modern cosmetic innovation, which has already been appreciated by thousands of girls and women. If the usual coating for nail plates loses its smart appearance after a couple of days, with gel nail polish you can not think about the problem up to 2 weeks.

Choosing a manicure for spring is easy if you familiarize yourself in advance with the trends of the current season. Fashion trends dictate femininity and naturalness, minimalism and neatness, but also lovers of bright colors will find interesting design options.

Red manicure on short nails. the classic genre, but it can always be made more interesting, more individual. There are many techniques of decoration of this bright nail art, giving it a “zest”. It is only important to choose a suitable shade of nail polish and design.