How to disassemble the vacuum cleaner Bosch bsg 82480

Bosch BSG 82480 reviews

The nozzle stand broke quickly. After use, all covered with dust. Washing the container is problematic. We have to take everything apart. The container seat is very inconvenient to wipe down. Can’t do it, can’t do it, can’t do it. Lots of nooks and crannies. Need to use a different vacuum cleaner there. The cord flies away so that it knocks down everything in a row. Foot, hand, if in its path, will hit painfully

Powerful, classy, rolls easily and quietly across the floor

Body gets dusty if you vacuum up sand, salt, or pr. small stuff. The filter clogs quickly, broke after 3 years

Nothing but a long cord, one torment with this vacuum cleaner, except that it is heavy, filters clog instantly, until the warranty expired I tried to get rid of it, but I failed.

The device has not met my expectations, I thought it would be of German quality but alas, it has made me cry. I`ll probably buy another vacuum cleaner after six years of use and I`m always looking for cheaper filters.

Floating power. Plastic container instead of bags.

I’ve been using this vacuum cleaner for about 6 years now. 1. Powerful at the max. easily lifts the rug off the floor.2. Really cleans up dust: as in advertising, on a carpet it is possible to notice visually places where vacuum cleaned and yet not (at frequency of cleaning 1r/week).3. Enough quiet for THIS power, though to hear, for example, a call of a cell phone during vacuum cleaner work it is not always possible.4. Maneuverable on the whole, though I agree that sometimes it gets stuck on its own wire.5. The ability to use both the container and bags: my husband, if he vacuums, he always uses bags, and I only use a container.6. Rather “hardy”: I have experienced collecting a decent amount of construction dust (just dust, not debris) from sanding the walls during the repair in the room and polishing parquet on the floor. Although it has a “downside”. about it below, in the disadvantages.

The bad adhesion of the bellows to the dust canister (whether it’s a container or a bag): The dust canister compartment became dirty very quickly, even if I vacuum it (with a second vacuum cleaner)?:-. It’s hard to clean it: a lot of ribs and constructional bottlenecks, where a rag can’t reach. Similar problems with dirtying the lid of this compartment: excessive structural complexity, resulting in. the lid itself as a dust canister.2. The container: it is also very difficult to clean after each cleaning, it has a number of gaps from which the dust can not be removed in principle (near the entrance to the container corrugator).3. the motor protection filter, located in the compartment of the dust canister, clogs up EXTREMELY FAST. The problem is solved by removing the filter and cleaning the vacuum cleaner in the process of cleaning, reinserting it and ending the cleaning process. The problem is solved by removing the filter, clean it in the process of cleaning, put it back and finish cleaning. We could consider it as a concern for our health. so as not to breathe extra dust in the air, but not for the lazy one, exactly, such “technology”.4. The HEPA-filter is not well-matched to its compartment: when you start the vacuum cleaner, especially if you do not just put this filter in there, the dust can fly out of the compartment; both directly through the filter and around the perimeter of the compartment lid. Doesn’t make a difference if it’s a native Bosch or a compatible one (tried them both). A little bit saved by frequent filter changes or washing it, although that’s not too technology either. 5. ELECTRICALLY COVERED and telescopic tube. The problem can be solved by holding on EXCLUSIVELY to the rounded plastic handle that connects the corrugator to the tube. BUT! You have to dodge the accidental touching of the bellows as well; otherwise, a weak shock of “static” is sure to happen.6. Unfortunate design. 3-in-1″ additional brush: the “crevice” is the least convenient to use, t. к. the swing-out “cover” of the other brush makes it impossible to access the really difficult, narrow places. Behind/under couches, cabinets, etc. п.

Main characteristics

Types of cleaning	dry
Power consumption	2400 W
Type	regular
Power setting	on the body
Fine filter	there is
Dust collector	6 l bag/cyclone filter

Additional features

Features	dust bag fill indicator, auto winding up the cord, vertical parking
Additionally	container 2.4 l; turbo function for removing heavy dirt; range 13 m

Nozzles and tubes

Nozzles	Floor/mopper roller (280 mm); combined 4in1 (upholstered furniture, cabinet furniture, sliding crevice. short / long); drilling nozzle
Type of suction tube	telescopic

The exact specifications check with the seller.

I do not recommend this model. I have been using it for 3 years. Very difficult to service

Powerful vacuum cleaner, vacuumed well. Served three years (I think. little!) After three years of use, the power control broke and the top of the brush (on the battery) Bought for 6 thousand. Do not advise to take this model. there is a better one!

The plastic bin is nothing at all. Immediately for throwing out. Clogging the cracks, does not work in any way. Since I was looking for a vacuum cleaner without bags. Counting on the fact that this miracle can work without them, was very disappointed when even half of the room could not vacuum with the container. The power goes down, no result. I fought with it in various ways. Cleaned it, disassembled it, read the instructions to bits. bolt. Freaked out. At the time it cost 8,000. It was a real pity for the money. Frustrated repeatedly frustrated with the vacuum cleaner in the form of physical abuse. And that’s where its perks come in. He was paid for his bad work in every way. ♪ I kicked him, I threw him to the floor ♪. Even took it by the corrugator and tossed it along the room. I didn’t do it all at once, but it got on my nerves for a long time. Works! I stabbed him with his own sliding tube. I’d bang on the floor with the pipe itself repeatedly. In the hope it would die and I would buy a new one, I used it to clean the construction debris after demolishing the concrete slabs. Garbage of any size, as long as it fit in the corrugation. Works! It still stands in the apartment because I can’t break it. I fought with it for the first two years. It’s probably seven years old by now. I got used to using bags. They are also bad. It works great as long as it’s new, but after every cleaning the power goes down noticeably. I have to open the bag and shake the dust to make it sink deeper, after that the power returns. For reliability. 4. The power is good, but it takes a lot of effort to maintain it.

From such a well-known manufacturer, of course, I expected a higher quality and thoughtfulness of the whole construction of the vacuum cleaner. The plastic is flimsy, when I wash it, I’m always afraid of damaging/breaking something, especially when I shake out the vacuum cleaner compartment. Till now to this vacuum cleaner mixed feelings: very much like its power and “omnivorous” to a dust, ease of movement (all wheels rotate on 360 round its axis). But the filtration and cleaning system in it. Very bad. Cleaner is clearly an amateur or fan of the brand, I would not recommend its purchase.

Used it for 3 years, 2-3 times a week, until it cleaned up the mercury from a broken thermometer. Looked like new after 3 years of use. But what to do, poisoned it. Cut cord so others wouldn’t get hurt and threw it away.

I recommend it! A good vacuum cleaner for the home, first mate for the wife. We are satisfied with the purchase and believe that it is fully justified.

The vacuum cleaner is really powerful. But if you use a container, the power decreases markedly at the end of cleaning. I clean three rooms, the kitchen, toilet, bathroom, and 2 hallways, everywhere palases. When I start to clean, I have to hold the edges of the carpet, because it feels like a rug, but the power is noticeable when I use the canister.к. The vacuum cleaner picks them up from the floor, by the end of cleaning I vacuum freely. The handle seems kind of flimsy, I hope it only seems. Clean the container takes literally three minutes. Vacuum cleaner does not move obstacles, even its own cord or the edge of the palace, you have to carry it. The vacuum cleaner is noisy enough, it blows a lot of warm air, there is no smell of dust. I am satisfied with the quality of cleaning. After replacing the old vacuum cleaner with this one, I noticed that there is much less dust on the furniture, apparently due to the filtration, which does not release dust from the vacuum cleaner back into the room. Bought a vacuum cleaner for 7000 rubles., If bought for 9900r., I would have been disappointed, but I’m satisfied.

Bought a vacuum cleaner as a gift to his wife. The old one broke down and I had to buy a new one in a hurry. I had a long consultation with a store assistant and could not choose the best option, but finally I chose this one. No regrets! The advantages of the new vacuum cleaner over the old one are clear. The old vacuum cleaner was noisy all the time, turned off when I wanted to, had an uncomfortable cord and a strange dust canister. The new model practically doesn’t make any noise and all the buttons (including additional ones) work properly, don’t fall down. The wife has no complaints. We’ll see what will happen next, but so far we are satisfied with our purchase.

Served about a year. Then, because of the loss of integrity, the power of the device sharply decreased and the sense of its operation was questionable. Today disassembled by parts and took to the trash, because to collect and glue all the small parts was more complicated than buying another vacuum cleaner. All that was left was the base with the wheels and handle. I will make from it a miniature cart for small things in the village 🙂 The hose is perfectly intact, but it does not fit the popular models, so if anyone needs. for free.

After three months it started to cut out at maximum power. Had to wait a few minutes, then turn it on at about half power. Took it in for repair under warranty. We waited a month and a half for a motor replacement. After repair, after about a month, again the same thing. We didn’t bring it in for repair, we vacuumed at less than half-power, i.e.к. If you increase it, it shuts down and starts to smell like burnt wiring. At the same time the carpets remain dirty. Look for another vacuum cleaner and just throw this one away.

How to repair a Samsung vacuum cleaner

Repair is the first thought that comes to mind when you hear motor noise. You may have accumulated a lot of dust inside the appliance. To check this, you must first disassemble the vacuum cleaner. Needed tools: To disassemble without permanently damaging the cleaner you will need

• Two Phillips screwdrivers for large and small screws, and two flathead screwdrivers;
• Tweezers.
• Pliers or wire cutters.
• A 12 mm socket head.
• A locksmith’s vise.
• Lubricate the motor, if necessary.

Important. To prevent your Samsung vacuum cleaner from ending in trauma, follow these essential safety precautions. During all manipulation, the device must be turned off. Only after the vacuum cleaner is de-energized can it be disassembled.

To disassemble a Bosch vacuum cleaner bsg 82480

Check with your hand when the lid is closed to see if there is any traction. There is no traction, which means we move on to removing the extra filters that can affect the traction. After removing the internal filter in the trash compartment, we look into the hole where the motor is located. And there it is, our problem: the motor impeller is clogged with debris. This is most likely caused by the owners negligence. The bag is loose, the filter has not been cleaned or changed for a long time, etc.п.

So, sick, let’s go straight to the opening.

Let’s start by removing the top cover. If we don’t do this, it’s going to get in our way. Gently squeeze the lid fasteners with a flat screwdriver.

Now we are looking for the self-tapping screws. Two of them are hidden under the sealing gum of the cover we removed. One. under the power key (it also needs to be removed using the same flat screwdriver, unscrewing the fasteners on the side). Now with a Torx15 screwdriver we unscrew the self-tapping screws we found. Armed with something flat, unlock the upper and lower halves of the body. Inside we are met with colored wires and a new cover, under which the patient’s heart is waiting for us. the motor. But first we need to take out the speed regulator (little plate with colored wires). To get it out we slide the speed regulator shaft up and to the left. Now it’s easy to get the regulator out of the groove. Unscrew the only self-tapping screw that separates us from the target and easily separate the motor box cover upwards, not forgetting to pry it with a screwdriver from the front.

Our nesting doll is open! Inside the cabbage leaf noise insulation hides our motor. And on the right side of it is the control box. This is where the electrons are running through the mains cable, and then through the cable guide in order to rotate the ill-fated impeller.

Something I was distracted from the motor. Remove the power terminal and take out the motor. A lot of hair and dust, that’s what’s in front of our eyes. All this wealth is trapped in the holes of the impeller, whose task is to suck in air as it rotates.

To deal with this problem we will help the second vacuum cleaner, borrowed from kind neighbors. Clean, clean the chimney sweep, you understand. The chimney sweep, t.е. motor. clean. Now we need to clean other nooks and crannies. I mean the body itself and the noise insulation, which not only makes our vacuum cleaner quieter and more expensive, but also picks up dirt no worse than a real wiper. All clear, so it’s time to close the patient, t.е. collect. Don’t forget the tools inside. Reassemble the vacuum cleaner in the reverse order of the disassembly process.

And so it sang and hummed, sucking in the air, speaking his language Thank you, Friend!

Engine repair

Below you will find tips that can be used to fix the vacuum cleaner yourself. It is necessary to take into account that all actions with details of a vacuum cleaner should be carried out as carefully as possible, especially when it comes to the motor. Before starting any work, be sure to de-energize the device.

The impeller has shifted

To put the impeller back in its proper place, a simple adjustment is needed by loosening and locking back the nut that holds it in place. Never use pliers to stop the impeller to remove the nut. If you try to do this. the impeller is irrevocably damaged. By carefully correcting the location to the part, you will solve the problem without loss.

Screws loose

There are cases when, after prolonged use, the screws not only “float” but fall out. Carefully disassemble the vacuum cleaner and check each of them with a screwdriver. If you find “spinning” of any screw, it is worth trying to replace it with another one with a larger diameter. The difference, of course, should be minimal.

The rotor bearings are worn out

Worn bearings are a serious problem. As mentioned above, the problem with the bearings is obvious if the suction power of the device changes all the time from very weak to normal. The bearings will be replaced immediately if malfunction or damage is detected.

Electric brushes deformed

The motor brushes are in a kind of brass shafts (essentially just carbon in the form of graphite). In operation, the brushes rub against the collector shaft, and their middle gets worn out. They become semicircular in shape and their contact area with the working surface of the manifold increases. The springs in the shafts described above are responsible for pressing the graphite against the collector. The brush stays on until it is completely worn out. So it is the wear and tear process that you should pay attention to. Of course, before assessing the condition of the brush should be thoroughly cleaned.

Motor is heavily contaminated

The vacuum cleaner must be completely disassembled first and then the motor. Clean each removable part separately with a damp cloth or tissue. If there is large debris stuck in the parts of the motor, you should not rush to remove it by force. before you do it, you should check whether this will damage any delicate parts in the construction of the motor.

Damaged winding or armature

Unfortunately, if such a problem is diagnosed, only a complete replacement of the motor can help. In Bosch service centers, such a replacement costs almost as much as a new vacuum cleaner, so learning to disassemble the device and motor yourself can be an extremely economical skill.

Typical vacuum cleaner breakdowns

Other vacuum cleaners have two motors. The second one is located on the brush, where it makes the hairs move. Cyclone models use turbos, the work is done by moving air. The constructive ingenuity simplifies the manufacture of the hose, gets rid of one big problem, when the wire is torn in the thickness of the rubber. Of course, modern tools will allow you to accurately locate the mishap, it is better to avoid breakage at all. The idea of the designers who placed the motor inside the brush is easy to understand: there is no need to push while cleaning, the weight is decent. Whether you like it, you decide for yourself. In the opinion of the editors, the brush should be light, to make it easier to wield.

The repair of a wet vacuum cleaner is the same as described above. However, the units contain a pump that supplies water to the hose. Back to the issue in reviews later. As for the inlet path, the configuration is the same as the usual one, except for the water filter. Most look like dull boxes filled with water. Some vacuum cleaners with water filter have thin jets of water squirting out at the hose-housing junction. The primary dust collection works. However, it is difficult to notice a malfunction. Another thing is if the vacuum cleaner is equipped with an option of self-diagnosis, which will prompt the location of the breakdown.

Repair of robot vacuum cleaners touches closely the area of electronics. There are no service mechanisms at all. However, in a smaller size will find the motor. Most of the functions are implemented by microchips, the memory holds a variety of programs. Repair of vacuum cleaners Electrolux seem child’s play compared to the task to adjust the Rumba or Scooba American firm iRobot (the developer of military and police automation USA). The main disadvantage of robots is their inability to clean on uneven surfaces. Electronic servants don’t know how to create a vacuum they use a rotating brush to sweep up dust.

How to take apart a vacuum cleaner brush and clean it from debris

Our home requires regular cleaning. Street dust and dirt, pet hair and food crumbs are not easy to clean up with a regular broom. Fortunately, progress does not stand still and almost every house has a vacuum cleaner. This miracle of technology greatly facilitates cleaning and makes it better. And recently I learned a useful trick: how to disassemble the brush from a vacuum cleaner.

I had no idea it was possible. But most of all I was surprised by the amount of debris in it. Clumps of dust filled the entire space. Later I learned that a dirty brush can cause rapid heating of the vacuum cleaner and poor traction. Now I understand why constant cleaning and even changing the filters did not work. Telling you what to do.

Bosch vacuum cleaner does not turn on: instructions for use

Vacuuming with a vacuum cleaner. It’s a chore, but once it’s done, you can be proud of how much cleaner your floors can look. Imagine coming to use your Bosch vacuum cleaner and finding that it won’t turn on No suction, no noise. Just nothing happens; you could assume the machine is broken!

However, the current situation may be due to a minor error, which is nothing more than a minor inconvenience. Following our article below will help you determine the problem. Let’s consider if the Bosch vacuum cleaner does not turn on the reasons what can be:

• Worn motor brushes.
• Equipment cable.
• Defective motor.
• Getting your cordless vacuum cleaner back up and running.
• Failure to work or reduced performance due to a clog.
• Advantages of having the repair done by a qualified technician.

Most motors in vacuum cleaners have carbon brushes, over time they wear out and when there is almost nothing left, the motor stops working completely.

• Safety first! Unplug the unit before beginning any repair.
• Open the Rainbow and remove the brushes.
• The carbon tip should be 3 to 10 mm.

This is what is pressed against the motor commutator. If the carbon brushes are worn to the point where they barely reach the collector, they will need to be replaced or more serious damage could occur, leading to replacement of the motor or the entire equipment.

Power cord. Without it the cleaner wouldn’t work (unless, of course, it’s cordless). The copper wire inside the insulation rubber is probably broken. When it is found to be damaged, it will need to be replaced.

The easiest way to confirm damage to the power cord. is to use a multimeter.

• Open the vacuum cleaner and use a multimeter to check the low resistance reading.
• You need to check the plug connector to where the cable connects inside the machine.
• Then carefully bend the wire in the suspected damaged area to see if the connection is broken. If it appears that the cable is faulty or has visible damage showing internal wiring, it will need to be replaced.

If you’ve checked the carbon brushes and power cord and everything is fine, it’s worth taking a look at the motor. The motor is critical to the operation of the cleaner and it is important to keep it in good condition for optimum performance.

A working motor will have a typical resistance reading of 20 to 60 ohms depending on its capacity.

The problem could be the vacuum cleaner adapter, the charging dock, or the battery and electrical outlet.

• Try plugging the vacuum cleaner into a different outlet. If it works now, the problem was in the first outlet you used.
• Plug the unit into a working outlet and see if the charging dock or adapter lights are on. If they aren’t, it means that something is wrong with at least one of these parts. You should call a certified technician to repair or replace the defective part.
• Cordless vacuum cleaners are battery operated. Just like a portable computer or cell phone, this battery has an expected life. If your cordless vacuum cleaner is more than 10 years old, the battery is probably dead.

The best way to prevent any malfunctions and keep your vacuum clean. is regular maintenance.

Doing these three things will make a big difference in the longevity and efficiency of your vacuum cleaner:

• Clean the filters at regular intervals. One of the most common causes of loss of suction or motor interruption. clogged filters. Almost every vacuum cleaner has two filters on it. Motor filter. is usually in the back, near where the exhaust from the vacuum comes out. Allergen Filter. Usually closer to the dust container or bag. These two filters should be cleaned regularly, usually at least once a month. Consult your manual to find out where the filters are and how to clean them, as they may vary from model to model.
• Don’t overfill the bag or dust container. If your vacuum cleaner is full of dust, it will affect its efficiency. We test vacuum cleaners when they are empty and again when they have dust and debris in them to see if they will continue to clean after you’ve used them a few times. In almost all cases, suction is reduced when the bag or container is full of dust, sometimes by 30%.
• Make sure there are no hairs or fibers on the brush. If your floor tool doesn’t have a rotating brush, check the air paths and bristles around the edge of the tool. Sometimes hair, fluff and dust can get stuck in here. Remove debris to ensure airflow.

If none of the steps above have fixed the problem, your next step should be to contact an appliance repair and service technician.

Video repair manual. does not work cleaning the Bosch vacuum cleaner cord BGL32500

• Trying to repair it yourself could cause a more serious breakdown.
• The handyman gives a warranty on all work.
• Installing genuine parts will ensure maximum compatibility and long life.

Our service center will give your vacuum cleaner new life and return it to its original performance!

Bosch BSG82485 vacuum cleaner manual

Need a manual for your Bosch BSG82485 Vacuum Cleaner? You can view and download a free PDF manual below. Also, here are some frequently asked questions, product ratings, and user reviews to help you make the best use of your product. If this is not the manual you were looking for. contact us.

Your unit is defective and there is no solution in the manual? Go to Repair Café for free repair service.