How to Wrap Fishing Line On Trimmer Video Correctly

We wind the fishing line on the trimmer reel

Owners who have their own household plots often encounter the problem of keeping a lawn, namely, the need for high-quality mowing of grass. For these purposes, either a manual or an electric braid is used. a trimmer (see photo). It is clear that working with the electric model is much easier and faster. The grass is mowed using a fishing line rotating at high speeds. But during operation, the thread wears out over time and requires a change. So how do you rewind the fishing line on the trimmer reel with your own hands?

Types of fishing line

The thread for the trimmer can be divided into types according to its diameter. It can begin with the smallest. 1.2 millimeters and reach up to 4 millimeters. The most commonly used is a diameter of 2 millimeters. But it is necessary to select it strictly individually, based on the specific model of the device. Often the required diameter of the product is indicated in the passport on the product. Usually the more powerful the trimmer, the larger the diameter of the fishing line should be. For example, it is best to wind a thread with a diameter of 2.4 millimeters on a coil of a Lawn Mower, and for a product with a weak engine, a thread diameter of 1.6 millimeters is suitable.

Fishing lines differ in type of section. It can be round (for mowing ordinary grass), square (for soft and often mowed grass), with sharp edges (for tall grass), with notches (for thin grass), and also complex (see photo). The latter can not be filled in all types of devices. It should be noted that the line is intended solely for mowing grass. To cope with other types of plants, it is necessary to use a Lawn Mower with a sharp knife. The length of the threads that can be tucked into the trimmer can range from 10 to 100 meters.

Video: How to Wrap Fishing Line On Trimmer Video Correctly

How to wind a line onto a trim reel

Spools of products may have different filing systems. This can be manual, semi-automatic or automatic feed. Depending on this, it is necessary to wrap the fishing line. So how do you thread a bobbin? To begin with, the cap is unscrewed on the coil (see video). If the thread on it is left-handed, then you need to turn it clockwise, and not as usual.

Such a thread is made so that during the operation of the product the trimmer head cannot unwind. To fill the thread will require about 5 meters of material (see photo). It must be folded strictly in half, insert the center into the space provided on the device and wind it in the direction of the arrow, which should be drawn on the reel, as in the video. After that, you just need to tighten the cap.

A car battery (battery) is a battery for storing and storing electric energy for the purpose of its further use. Namely for: launch.

Many motorists and motorists prefer at least a little, but to understand their own technology. This desire is fully justified. not only that.

How to replace a fishing line in any trimmer

Technological progress provides us with many opportunities to get rid of manual labor. Among other things, this includes grass mowing, which, when using an ordinary scythe, required a lot of physical energy. In modern conditions, this process is greatly facilitated, because Applied technology minimizes all costs. Devices such as electric and gas trimmers have firmly taken the place of indispensable assistants in gardening. Mowing grass with their help has become more fun than hard and grueling work.

Structurally, the trimmer consists of an engine, a rod and a working body, which, depending on the mowed vegetation, is either a mowing head or a disk mill. And if everything is more or less clear with a milling cutter, sometimes questions arise with a nozzle. As a rule, they appear when the line ends.

How to wrap fishing line on a reel? We understand.

So, first unscrew the nozzle. Do this by rotating the drum to the right. Here we have a drum in our hands with the remains of an old fishing line. We open it. Most often, the lid closes with latches, which can be opened with a screwdriver by threading it through the holes and pressing lightly. Or you need to squeeze the lock and turn the cover in the direction of the arrow. In this case, the lid itself must be kept, as in drums with automatic supply of fishing line there is a spring, which, when straightened, can throw out all the internal parts of the drum. Gently pulling out the reel, we remove scraps of fishing line from it.

Now you need to take 5 meters of new fishing line and fold in half (to find the middle). In the middle part of the reel there is a recess (in some designs. a hole), for which we need to hook our fishing line. There is also an arrow on the reel showing the direction of winding. An important detail. if the reel has two compartments, then one half of the fishing line should be wound in one direction, and the other in the other. Finishing the winding, you need to leave 15-20 cm of fishing line free. There are also two recesses on the upper ring of the coil through which these free ends must be drawn. We coped directly with the winding itself.

The last step in the fishing line replacement process is to assemble the drum. First you need to install the spring and washers in their place. Then, holding the reel with one hand, with the other you need to thread the ends of the fishing line into the corresponding holes on the sides of the nozzle. After that, install the coil in its place, pulling the fishing line and trying not to displace the spring. When all the internal elements of the nozzle take their places, you can close the drum with a lid. You just need to make some effort so that the latches fall into place. Voila! The mowing nozzle is ready to go!