How to disassemble the Bosch tat 6104 toaster

Figure in, Figure, Clean

Do not use a steam cleaner to clean the toaster, Disposal, Turning it on, Turning it off prematurely, Refreshing a stale loaf of bread, and

Figure □ Press the “STOP” button.

To make it easier to remove toasted foods from the toaster,

Move the power button up (Figure B).

If a loaf of bread gets stuck in the toaster, the toaster automatically shuts off. Remove the plug from the socket and after cooling down

2 buns so that the handles are not closed! Do not cover the nozzle for

Move the degree of frying knob to the “(^” position

and press the power button (figure B).

toasting.Press the power button and then the “^” button (figureB).

Never immerse the appliance in water or put it in the dishwasher!Do not use steam cleaners to clean it.Unplug the appliance from the power outlet and let the

The outside of the toaster housing should only be wiped down with a damp cloth. Do not use sharp objects or

Remove the crumb tray and wipe it clean (picture B).

To avoid endangering the safety of the user, appliance repairs such as the replacement of the disposal can be obtained from your dealer.

disassemble, bosch, 6104, toaster

designated for industrial use, it can only be used in the home. Please read this carefully

and keep it in a safe place!This manual covers the different models of toasters.

plug into an electrical outlet

Keep children away from the appliance.Unplug the appliance after each use or in the event of a malfunction.

In order not to endanger the safety of the user, appliance repairs such as replacement

damaged electrical cord, must be performed by a service technician

Do not put any objects into the toasting loading slot.The toaster should only be in an upright position when in use.

curtains or under curtains or near other flammable materials, and never leave

Toaster tops can become hot when toasted. Do not touch.

loaf a minimum of 4 times, set to the highest degree of under

Toasting in a toaster oven

Figure1Do not use a toaster without a pull-out crumb tray!

Steps 1-6Average toasting (up to 6 degrees Celsius)

Recommendation:When toasting a single slice of bread

Use a lower cooking level than for two slices.

Toast food until golden yellow, not dark yellow or brown,

Foods, especially grain products and potatoes, should not be overcooked

(this will reduce the acrylamide content of the food).

Figure in, Figure, Cleaning

You can’t use steam cleaners to clean it, Disposal, Turning on, Premature turning off, Refreshing stale loaves and

Figure □ Press the “STOP” button.

To make toasting food easier to remove from the toaster,

Slide the on/off button upwards (fig. B).

If a loaf of bread is stuck in the toaster, the toaster switches off automatically. Unplug the power plug from the outlet and after it has cooled

2 loaves so that the handles are not covered! Do not cover the nozzle for

Turn the browning knob to the “(^” position

and press the ON button (figure B).

toasting.Press the trigger and then press the “^” button (IllustrationB).

Never immerse the appliance in water or put it in the dishwasher!Do not use a steam cleaner to clean it.Remove the plug from the socket and let

The outside of the toaster should only be wiped with a damp cloth. Do not use sharp objects or sharp objects for cleaning

Remove the crumb tray and wipe it clean (figure B).

You can get the recycling from your sales agent.

How the toaster works, how it works?

Classic toaster is a closed case with slots inside which there are heating elements and a movable loaf basket. Places slices in the basket for cooking.

Toaster diagram. Off (top) position

The diagram shows the following parts of the toaster in the off position:

  • Lever. Lowers the loaf basket and turns on the appliance.
  • Heater. Red-hot nichrome wires that heat loaf.
  • Breaker. Is on the body and marked “Stop”. Designed for emergency power off and early termination of cooking.
  • Lock. Locks basket in the down position.

When off, the lever (1) is in the up position, the heating spirals (2) are off, the breaker (3) is closed, and the basket is raised. Lock (4) locks basket open.

The breaker is needed to forcibly break the circuit of the electromagnet power and interrupt the process if something went wrong.

Toaster Schematic. Working (lower) position

The diagram shows the following parts of the toaster in its operating position:

The hot coil of the heater. Radiates heat, baking the loaf.

Moving basket. Lowers product to the heater.

Locking bar. Holds the basket in place for the cooking time.

Electromagnet. Magnetizes the latch plate while the loaf is cooking.

Wedge-shaped plate. Closes the contacts when the basket is lowered.

When the user presses the lever, the basket (6) goes down and the following processes occur at the same time:

The wedge-shaped plastic plate (9) lowers and pushes the spring contacts.

Spring contacts close and activate the control circuitry, heaters, and solenoid.

The electromagnet creates a magnetic field that magnetizes the bar (7) to the core, thus locking the basket (6) to the lock (4) in the down position.

The control circuit starts the countdown timer.

Infrared (5) heats the loaf until the timer goes off. Once the cooking time has elapsed, the control circuit removes power from the electromagnet, the basket is released from the hook and returned to its upper position by the spring. The wedge-shaped plate (9) releases the spring contacts, they open and switch off the heaters and the control circuit.

How to repair the toaster repair with their own hands

An ordinary toaster, which has no additional functions, can be classified as a household appliance, which does not bring much trouble in the kitchen space. It’s simple: you can preset the frying program using the timer and the operation starts as soon as you put the slices of bread in the toaster.

Baking slices loaf occurs under the action of infrared radiation until the timer turns off. However, the elementary principle of operation does not mean that the toaster will work for many years without failure. And yet many malfunctions can be repaired by yourself. The material will consider options for fixing simple breakdowns at home, without going to the experts. Following the paragraphs describing the disassembly of the device, the repair of the toaster can be carried out with your own hands.

Toaster repair

This knob would adjust the toasting time if you rotate it, and stop cooking (STOP) if you press it.

It would seem to be easy to fix it, but it was a little more complicated than I expected!

But the handle, which is not broken (it was not used at all), does not want to take out!

But it turned out that this toaster is disposable and the handles were glued in after assembly!

And the fact that it snapped off. the switch itself fell apart in two!

On the handle, the top part with the housing is left:

The bottom part with the contacts is left on the board:

And the insides with the springs and the contact plate in a good tradition flew into the unknown and were not found! )))

In general it is assumed that after disassembly this toaster should be thrown out! )

But all the electronic parts and heaters are fine, so it can be repaired.

The adjustment knob was loosely inserted into the potentiometer to move back and forth in it, and a flexible contact plate was soldered on the board behind it, and the contact.

If the handle was twisted, the potentiometer was adjusted, and if pressed, the flexible plate was connected to the contact under it, and the toaster was turned off.

But the back part of the adjustment lever, which presses the plate and holds the knob in the potentiometer, broke off.

Well, everything is simple here. there is still a lot of space on the regulator lever, if you do not use it to press the contact plate, you can wrap it with duct tape and then it will be firmly inserted into the potentiometer:

In order not to lose the ability to manually turn off the toaster (because now the knob of the regulator will not be able to press, only rotate), we buy a cheap button:

We solder a piece of wire to the contacts from the flex plate and the contact underneath, then fill everything on top with thermal glue so that it sticks securely:

And then to the other end of the wire solder the button, not forgetting about the heat shrink tubing, which then cover the contacts!

Now the adjusting lever is firmly fixed and instead of the contact plate there will be a separate button!

But unfortunately this is not the end of the repair. when you disassemble it, the disposable switch fell apart!

It costs 34 rubles, but the batch of 10 pieces and wait 2 weeks!

No one ever used this switch anyway, it was always in the middle position, so we cleaned the contacts, tinned and simply soldered the two contacts, simulating the middle position of the switch! )

I also saw that the terminals in the closing relay were all burnt:

The toaster is disposable. you can’t disassemble the terminal block without breaking the plastic.

But I found out how to clean it: we take the smallest abrasive wheel for dremel, cut it with scissors, reducing diameter, and clean it very well:

To clean the contacts, simply turn the drive with the abrasive side facing them.

Checking how everything works, drill a hole in the body for the button, assemble.

And so everything is fixed, everything works, the button turns off! )

Комментарии и мнения владельцев 2

But it’s good, it will serve.ZS. I’ve never had a toaster in Russia and don’t need one. And when I lived in USA I couldn’t even imagine breakfast without it and without peanut butter.)

It will serve because even though it’s a one time use, it’s from the 90’s when the quality was good. it even has a Motorola microcontroller! ))

Разборка тостера Bosch tat6104.

In the morning toasted toast and spread butter. mmm )))

Although all have their quirks. some on principle does not use the microwave, someone. with an electric kettle. )

Peanut butter didn’t work for me. In the U.S. I bought it, but never finished, brought it here, I do not even remember how it was done with! )

Hello dear friends, today I would like to tell you about my experience of using a Bosch toaster.

It’s quite a popular model from a well-known brand, when searching for this toaster was practically on the first page of the output list in the browser! At the moment it costs 800 hryvnia in the local stores of household appliances. I trust the quality of the Bosch company, so I think that the price for it is quite affordable.

Quickly make breakfast/snack for work and school. Literally no more than 3 minutes and a couple of ruddy toasts are ready, you can make as much toast as you want in a morning, I usually make 4 toasts. In our family, we all wake up differently, so the line for toast we do not form

Nothing outstanding in terms of design, the classic shape is all there is to it, in terms of ergonomics all control keys and knobs are conveniently located. The “loading” knob for frying toast has an additional stroke upwards. It helps to get the hot toast without climbing over it with your hands.

The toaster is assembled neatly, there are no big gaps between the parts, the control buttons do not dangle, everything works properly.

Although the toaster has a tray for crumbs. it is not very effective, it only collects on itself those crumbs that have obviously fallen between the toasting bars, the remaining crumbs still remain inside the toaster and begin to burn. Actually the implementation is useful but easier to take care of the toaster does not help, you literally have to shake it out after use.

Width of the toast loading compartment is small, it fits a loaf of bread and toast loaf, you can cut the slices thicker, they will still fit.

The manufacturer highlights features such as:

Functions: Auto Off, High Rise, Auto Centering, Interrupted Cooking “Stop”, Reheat

The high rise is really handy. I’ve already talked about it. Auto-centering as I think should be in all toasters, it helps uniform toasting.

Another useful feature of this model. heating. Feet for warming the loaves are lifted by the handle on the other end of the toaster. We use this function very rarely and do not count on even heating, and stand and spin it like a kebab on the grill does not want, better just cook a couple of toasts instead of heating, the more for this there is a microwave oven.

Power 980 W

Number of toaster compartments 2

Number of products 2

Toasting level 6

Control Step switch

Material Plastic

Features Removable crumb collecting tray, bun heating rack

There is such a thing as “degree of frying”, in fact it’s just a timer without fixed positions, you can set the desired mode once and always use it. We usually set the mode to 3.Level 5 is enough for a loaf of bread or a small loaf of toast. Never use higher than level 4, with this mode it already starts to burn.

In the process it is interesting to observe the nichrome wire heating ) And by the way it is visible as the grids inside evenly put away the toast from the heating surfaces.

Mode set as always in our case 3.5 settings. Button sliced from the store. Even in this mode and with a regular loaf, the toast is baked to the full depth and there is no “raw” dough, with the toasted loaf is better. It is a little oilier and much softer, and has a more crunchy crust, the crust of the loaf is stiff.

In the photo you can see the unevenness of the frying and it’s just a disadvantage of this toaster, in some cases it turns out so, with a toasted loaf is better but only because he is banal “tender” and faster cooking.

Overall satisfied with this toaster, you can make breakfast quickly with it, there are moments with inconvenient cleaning and rare instances of uneven frying, but the overall impression is good. No extraneous chemical odors when cooking, although the body is plastic!

Hello all! Sometimes you want to eat a hot, well toasted toast in the morning or during the day. With coffee or tea, with butter or jam. for me it is a very tasty option for breakfast or snack. Not so long ago, a Bosch TAT3A011 toaster appeared in our family, thanks to which we now devour crispy loaf on a regular basis.

Today I will tell you about my kitchen helper, its characteristics and make some conclusions about the advantages and disadvantages. So, the hero of my review. toaster Bosch TAT3A011 and my experience in its operation.

General information

The package

Was packed in a box made of thick cardboard medium-sized toaster Bosch TAT3A011.

On the side of the box with a toaster TAT3A011 Bosch is also a brief information about the device in pictures. True, the inscriptions are in English.

Instructions for the device

Not much really. only a few pages of information in Russian.

First, the pictures on the Bosch toaster TAT3A011:

Exterior Specifications, Operation

I liked the design of the toaster. Rectangular-shaped, white appliance, non-slip plastic sides, modest lettering at the bottom:

We had an old toaster before, so the operation is intuitive: put the loaf slices, select the mode and press the lever. If it feels like it’s burning. pressed the red button.

Also, the toaster has a removable crumb tray.

On the bottom of the toaster is a sticker with the model, features, manufacturer, and manufacturer.

Convenient that there are “horns” for fixing the cord with the ability to shorten it.

I’ve used them and am pleased that there aren’t extra inches of cord dragging across the table.

Let’s toast the toasties already!

With a toaster especially keenly understand that the loaf of the same name is not called toasted for nothing, as slices of loaf from an ordinary “brick” are no longer as tasty, crispy, but still “bite-sized”. They tend to dry out and lose their airiness, which in principle wasn’t much.

In general, I prefer a toasted loaf (pardon the tautology) for toast:

When the toaster is running the red Stop button lights up and heats the sides inside.

If you like it rare, put it on 3 or 4. You have to judge by taste.

Sometimes I toast like this for soup. My son likes to dip them into a plate like regular breadcrumbs.

By the way, the manufacturer advises to “run” the toaster without a loaf before the first use, so that all the grease evaporates.

After providing ventilation in the room, turn on and heat the empty toaster at least three times at the highest toasting level, then let it cool.

That’s what we did. And the smell was not the most pleasant. Fried an empty toaster three times and it all went away.

Another good tip from the manufacturer:

Set a lower toasting level for one slice than for two slices.

I got one piece of loaf burned that way.

Pros of the Bosch TAT3A011 toaster:

You can fix the cord on the bottom and shorten that way,

The loaf is perfectly toasted (for the slight unevenness I won’t take a plus),

The tray does not cover the entire space, so the crumbs must be taken out of the corners and also they can spill on the table even with the tray inserted (but here again I am not a baker).

Toaster repair with their own hands

Few people would refuse to eat toast sandwiches made of aromatic loaf toast baked in a toaster oven before leaving for work in the morning. It’s the kind of breakfast that will lift anyone’s spirits! However, the toasters are also short-lived. They need to be taken care of, regularly serviced. And although the toaster by virtue of its simple design is reliable and easy to use, if not properly operated, it can break. At home it is quite realistic to repair the toaster with their own hands, if you know its internal structure, the principle of operation and the main faults.