Reviews of popular garden equipment ~ lawnmowers, trimmers, brushcutters, brushcutters ~ on ARKHENO.COM Tips and solutions to possible problems in operation
Tiller won’t start, no spark Modern Tillers are distinguished by their reliability and durability. But they are not immune to malfunctions. Therefore, it is worth familiarizing yourself with the most common unit breakdowns and ways to eliminate them. Why not turn on the tiller? Tiller repair will be successful if you correctly diagnose motor vehicles. The reasons for the breakdown […]
Read more
Determine the availability of fuel and its supply. First you need to make sure that there is a fuel mixture in the tank of a chainsaw that does not want to start, and it regularly enters the carburetor. With a full tank, we check how the mixture is fed through the gas line. Disconnect the fuel system pipe from the […]
Read more
Eliminating the reasons why the lawn mower won’t start The fuel mixture must be prepared with the exact proportions of gasoline and oil. In this case, you cannot use another brand of fuel. To exclude the ingress of dirt, gasoline should settle in glass or metal containers for 2 days. Do not use plastic utensils for storing fuel. Measure oil […]
Read more
Fills the candle of chainsaw | Eliminating the problem Inspect everything on the trimmer for cracks, bends, abrasions, distortions, breaks (especially metal knives at the base of the teeth and at the holes and both protections). Eliminate all faults detected on the lawn mower reliably. If you do the tightening of the fasteners yourself, then do not overtighten! Filling a […]
Read more
WHY THE LAWN MUTER WON’T START. TROUBLESHOOTING WHERE TO START THE DIAGNOSTICS OF THE MOWERS If the mower does not start or immediately stalls after starting, it is necessary to sequentially check all the main components and assemblies. The check algorithm is as follows:.Fuel tank (fuel quality);. Spark plug and spark plug channel;. Air filter;. Fuel filter;. Breather;. Outlet. These […]
Read more
When you hit the gas The sawing units are idling, but the saw stalls when the gas is pressed, because the load increases. Before use, the tool is warmed up by running the engine at idle for a minute. If this is neglected, the motor will stop after pressing the pedal. Other reasons could be: Clogged or unregulated combustible fuel […]
Read more
Checking the spark plug and the gap between the coil and the magneto The spark plug is the most important part that ignites the fuel mixture entering the cylinder chamber. If the candle has served its purpose, then it will give out a weak spark or not at all. You can check this in the following way: Unscrew the spark […]
Read more