Tool for stripping insulation from coaxial cable

tools and gadgets for working with electrical cable from AlieXpress

Carrying out local electrical work at home or in the country, is quite accessible to almost any handy man. For the organization and convenience of such works, you need a certain arsenal of tools and devices to get everything right and neat. In the selection gathered such things that will be useful to any home handyman. The main thing is to remember to turn off the power before doing anything.

Cable trimming tool

The first thing to do is to prepare the cable by cutting it to the right length, or, for example, by trimming individual old or damaged wires protruding from the braid to the same length. You can do it with special cable cutters with rounded edges, adapted specifically for cutting cable. There are several variants of this tool for work with different diameter of cable from 25 to 70 kV.mm

Pliers for low voltage applications

If you work with thin low-current wires, twisted pair, cutting legs of electronic components, etc., it is more appropriate and convenient to use for cutting purposes, small special pliers with bent at an angle of 45 degrees working elements with sharp cutting edges. The tool is equipped with a return spring and insulated handles.

Cable stripping pliers

Perhaps one of the most popular and widespread tools for working with cable is the special stripping pliers. Their popularity is due to their versatility, i.e.к. the pliers can remove the cable braid in a fairly wide range of cable cross-sections from 0.5 to 6 kv.mm. In addition, this tool can both cut the wire and crimp the terminal, if it is used for connection. The pliers are equipped with a stripping length limiter. When purchasing I suggest you choose the D3 version on the product page as it is more reliable.

Portable Stripper

If the functionality of large pliers is excessive and carrying them around is problematic, you can use a similar small tool to strip the insulation. This gizmo is good not only for electrical, but also for coax or twisted pair cable, t.к. There is a possibility of setting cable diameter to be worked with tools. The use is simple, the tool is placed on the wire and rotated around it to cut and remove the insulation of the desired length.

Pliers and pliers for cable work

In addition to special tools for cutting and stripping insulation, it is logical to have more universal tools in your “toolbox”, such as pliers or wire cutters with items specifically designed for electrical work. These tools will not only allow you to remove the braid or cut the cable, but also to trim the cable channel, remove fasteners and perform other related operations. There are several good options on the product page in various sizes. The tool is equipped with well insulated handles.

A fixture for stranding wires

After you have cut the wires and stripped them of their insulation, you need to connect them. There are many ways to connect, one of them is stranding wires. Hand-twisting, especially if the wires have a fairly large cross section, is quite problematic. However, there is a special tool that can both trim the insulation and neatly make a reliable twist of several strands. The tool comes in two versions: for making twists by hand (with protruding handles) or using an electric screwdriver. Two to five wires can be stranded at a time. Although it is claimed that the tool can strip the insulation, I would recommend doing it beforehand and twisting already clean wires.

Multi-wire crimping tool

Proper wiring should be done with stranded wire, and it is better to connect such cable by soldering or with the help of terminals. When using terminals, screw or clamp, in order not to damage the thin strands of wire, it is highly desirable, on the ends of the wire stripped of insulation, put NSHVI (pin lugs, bushing insulated). For their fixation just such pliers are required, they evenly compress from four (or six) sides of the tip that it was well fixed and the big zone of contact was received. Not only the pliers themselves are on the product page, but also kits with tips of different diameters and lengths. I recommend to buy the version with six crimping cams, I use it myself when installing lighting fixtures, electrical plugs for devices, etc.

Pliers for special terminals

It often happens that when repairing some electric device you need to replace a broken or burnt-out terminal of a certain shape at the end of the electric wire. The variants of such terminals are quite diverse, including the thickness of the cable to which they are installed and how they are fixed to it. For this, you can use the universal crimping pliers, which are designed just for crimping. The tool has interchangeable dies that can be changed to fit the terminals you need. On the product page you can choose from a variety of sets with different numbers of interchangeable dies.

Soldering kit for electrical installation work

Twisting and clamping is certainly a good thing, but often you just can’t do without soldering the connection of the electric wire. That’s why the soldering iron is an irreplaceable thing for every home handyman. The all-in-one soldering kit is perfect for residential use. The set includes all components necessary for comfortable soldering: soldering iron with adjustable temperature of the tip, solder, stand, interchangeable tips, tweezers and even a small multimeter. The whole kit comes in a zippered case. 60W soldering iron power is enough for all home use.

Heat Shrink Tubing

All electrical connections must be insulated to prevent short circuits. For this you can use duct tape (blue 🙂 or use heat shrink tubing which when heated greatly reduces in diameter and thickens. The set includes soldering tubes of different diameters, length 45mm. Simply put on the electrical wires and heat the tube with a soldering iron or a heat gun.

I hope that the tools and appliances collected in the set for work with electrical cable have been interesting, and maybe useful 🙂 Other popular product picks and reviews of interesting gizmos, you can find just below in the author’s profile. Thank you for your attention. Have a nice and profitable purchase!

Automatic cable stripping tool: say “no” fatigue

Automatic strippers like Stanley FMHT0-96230 do not need to be adjusted, just select the length of the stripped area and the tool is ready for rapid stripping of wire with a diameter of a tenth of a millimeter to several millimeters. It is especially convenient to remove the insulation from flat wires, which are widely used in household appliances. An automatic stripper can strip two or three strands of flat wire at a time. If you need to strip a lot of wires in the workplace, the automatic stripper is the best choice, but you need to choose a quality tool that requires a minimum of physical effort for stripping.

Stanley FMHT0-96230 automatic stripper can strip wires from 0.8mm to 2.6mm in diameter

When selecting a tool for extended use, automatic strippers weigh approximately 350 grams. The solution is a simpler, lighter weight all-purpose stripper like the Paladin Tools PT-1117. The stripper has several holes of different diameters and allows the stripping of wires with a cross section of 0.34-0.6 mm2. Usually, these strippers have a number of additional features, such as wire cutters and crimper (a tool for crimping lugs) in some cases, this saves the need to carry extra weight.

Universal strippers are the most common strippers and are often included even in simple tool kits like Greenlee GT-10191.

On professional forums, you can often encounter the opinion of electricians that when using a stripper, it is sometimes difficult to get the wire into the hole of the right diameter. Therefore, experienced electricians first put the wire in the hole of a known larger diameter by notching the top of the insulation. If the insulation is soft it is easy to remove, even if cut in half, and if harder the wire is inserted into the next hole of a smaller diameter.

When used properly, universal strippers can last 10 years or more without a reduction in performance. But they are not suitable for stripping metallic, Kevlar braid or cured old insulation.

The principles of stripping wires of their insulation

Professional tools use two principles to remove the protective coating from the cable:

• Breaking. This method can be compared to stripping wires with teeth, where a piece of insulation sandwiched between the teeth is torn away from the rest of the coating with force directed along the conductor.
• Cutting. In this case, the cutting edge cuts through the protective layer in a circular pattern, without damaging the live wire. Then, a piece of the cut tube is removed from the conductor with little force.

Professional wire stripping tools, there are:

For small amounts of wire in the home, you can use simple ways to strip the ends of wires.

Simple ways to strip wires

You can strip cable ends in two ways:

• Thermal effect. The heating of the core to the melting point of the insulation is used. This is accomplished by:

• Soldering the insulation layer of PCV with a soldering iron and then removing the coating with pliers. The big drawback is the poisonous fumes and corrosion on the soldering iron tip.
• Lighter.
• With heated nichrome wire.

These techniques are best used for thin, low-power conductors used in electronics, communications devices, audio equipment with stranded soft conductors operating in circuits where the voltage is about 5 volts.

Tip: These methods should only be used when you are stripping a small amount of wire.

• Mechanical shearing. The method is based on removing the protective layer with the cutting edges of the tool. At home, it is best to use a wire stripper for this purpose.

Electricians often make the knife with their own hands. To do so:

• Takes a chip from a metal hacksaw blade with a small blade.
• It’s sharpened on an emery machine to give the tool a sharp, thin wedge.
• The handle is made by tightly wrapping wire with several layers of insulation tape.

This blade perfectly cuts a layer of PVC, but improper work with the blade can easily damage the metal of copper or aluminum close to the insulation.

Tip: When using such a homemade tool, the blade sharpening plane should be very carefully directed at an acute angle to the layer of insulation to be cut, which will allow the tool to slide over the metal wire when it touches it, rather than cut into it.

How to quickly strip copper wire insulation at home, the video will tell you.

Tool for stripping.Types and work.Use, select

For quick and convenient stripping of insulation from wires and cables special tools are used. An ordinary knife, side cutters, soldering iron can be used for wire stripping, but this method is time consuming and requires caution, especially when the conductor consists of fine twisted copper hairs. Aluminum strands are the most sensitive to bends, cuts and scratches, and must be handled carefully when stripping the PVC sheath layer. In order not to damage the mechanical condition of the metal wire, it is recommended to use a stripping tool specially designed for this purpose.

A review of the best stripper models for stripping wires

The tool for stripping is very popular with the domestic manufacturer KVT. The company offers high-quality models of strippers at an affordable price. One of the most popular models is the WS-04A stripper, which is designed to remove wire braids from conductors of 0.05 to 6m². With the microtuning screw the diameter of the hole can be adjusted to the cable size. You can buy a stripper for 1.2 thousand.

To strip insulation from flat conductors PUNP and VVG-P and to clean the cable sheath with a cross section of 0.05-10m² the KBT WS-11 model can be used. Insulation tool has a micro tuning screw that allows to choose the necessary hole diameter for the specific cable size. For convenient operation, the tool is equipped with two-component handles and heavy-duty clamping jaws with a grip width of 13 mm.

The stripping tool WS-04A from KBT is one of the most popular devices

The stripper allows stripping several wires in one motion, which is made possible due to the wide clamping jaws. The tool is equipped with the option of partial stripping. Stripper price is 1,4 thousand.

Another good model of domestic production is the tool for stripping KBT WS-12, which is used for multicore and multi-conductor cables with a cross section of 0.05-10 mm². The tool has a built-in module for stripping wires. The tool blades are made of stainless steel. They have guides that prevent loosening and slanting. The tool can strip the insulation from the middle of the wire. The removable all-metal adjuster allows you to set the distance required to remove the braid. The tool costs 1.5 thousand.

KBT stripper in demand

A compact and easy-to-use stripping tool. KBT CS: GO 25. It is designed for LV-ABC cables with a cross section of 4.5-25 m². The wire stripper has a pivoting blade that is adjustable in length and removes 3.5 mm of braid. Insulation cuts can be made longitudinally, crosswise and spirally. The body of the device is made of impact-resistant plastic, which guarantees the reliability and durability of the device.

To manipulate with wires the tool can be set on the table and fixed with a spring-loaded clamp. You can buy a stripper for 1.5 thousand dollars.

WS-06 is an automatic stripper that can be set to the necessary insulation thickness

KBT WS-06 Insulation Stripper is an automatic stripper that can be set to the proper diameter and thickness of insulation. It is designed for stranded wires up to 2mm. Removes braids from 0.2-6 m². Made of fiberglass material for strength, durability, and ease of use.

Important! This model has narrowed ends, which allows using the device in hard-to-reach places.

The tool is equipped with a length limiter for stripping. Handles have a lock when folded, making the tool easy and safe to keep. With this stripper, you can make a V-shaped cut in the edges of the cable when stripping wires of insulation. Tool can be purchased for 1.3k.

Tools. Wire strippers. tools for stripping wires

The most important thing when stripping wires is not to damage the wire itself and not to damage the insulation where it should stay. It is also important that it is fast, convenient and safe.

The wire stripper is a tool for stripping wire (wire stripper, stripper).

I have a few strippers, so I thought I’d do a little review:

The oldest and most proven option, used by all electricians since ancient times, is this type of wire stripper:

The principle of operation is very simple. with a screwdriver the pliers are adjusted to the necessary conductor diameter (with a small margin so as not to scratch the conductor itself while stripping the insulation), then the wire is embraced, you can twist the pliers around the wire (to cut the insulation in a circle):

Then you just pull the pliers towards you and the insulation comes off easily:

These pliers come with non-insulated handles (are cheaper), and can be insulated (red or red and yellow handles, the inscription that there is insulation up to 1000V).

I have a model with insulated handles, and this is both my easiest and at the same time the most expensive stripper. whether 1200r or 1400r it cost (given that the same look can be found and for 600 or even 300r).

The thing is, this one is made in Germany, each one is tested in a live bath. The Chinese might lie about the insulation, and if it’s low quality and you’re electrocuted, you might get killed. And of course the hardness of the steel and the sharpening is also very good. you can easily strip the thinnest wires.

Disadvantages. if you work with different wire diameters, you have to either readjust the screw all the time, or have several of these pliers and get tangled up in them. Plus, you can’t adjust the stripping length.

The pros are reliability, indestructibility, possibility of stripping in hard to reach places other strippers can’t reach, and it’s the only stripper I know that can work under voltage.

It helped me a lot when my house’s power supply company burned out a bad connection (copper and aluminum wire bonds oxidized, and the electrician quit). I myself climbed up the ladder, and using these insulated pliers, as well as insulated pliers, wire cutters and a screwdriver, was able to bite off, clean up and restore the contact and be with the lights until the arrival of a real electrician. )

And it turned out that this stripper is capable of stripping the incredibly thin leads, which the other strippers in this review simply tear (diameter of wire with insulation. less than a millimeter)!

Let me remind you that this stripper is the most expensive in this review and it is made in Germany. it is probably very carefully made and its cheap analogues are not able to do it, but nevertheless.

Here is another stripper, it is designed especially for taking the OUTER sheath off of round cables:

Very good and handy tool, and it is indispensable for NYM type cable!

The only thing is that there are two kinds of them. with an extra blade (covered by the white translucent cap in the photo) and without it. So, this additional knife is absolutely unnecessary. I think the time when they were cutting wires with knives is gone, so it only gets in the way, it’s better to choose a model without it.

How this stripper works. it has a thin and very sharp blade built in, the release of which is regulated by a screw:

The screw is adjusted so that the blade cuts through the insulation but does not touch the wires in the cable. The device is put on the cable, clamped, twisted around, and pulled all the way through, cutting the insulation.

I got a great little piece of cable with a lot of high grade copper wire:

With this stripper, I easily stripped them by stripping the insulation:

Now I have enough wire for radio wiring for a long time! )

Next, my personal favorite is a fully automatic modern stripper with adjustable stripping length:

These strippers are available under different brands, I’ve seen them under the brand LUX, Weicon Super, KVT and some more. Cost about 1000r 1800r. the golden mean. There are cheap, black ones with black blades, similar in appearance. There are similar design expensive professional strippers at 3-5 thousand with great service life for those who all day long just strips wires. no need for that at home.

This stripper works very simply. you set the stripping length (on many terminals, outlets, switches, etc.).п. Write how long to strip for them:

Then you push the wire inside up to the stop and in one motion strip the insulation. Nothing but the stripping length needs to be adjusted at all.

The only downside is sometimes stripping residue gets stuck in the stripper and you have to take it out. This happens if you slowly squeeze and unclench the handles, but if you strip with a quick motion, the insulation comes right off and doesn’t get stuck.

Probably strippers for 4-7 thousands have no such disadvantage, but this is important only for professional installers who strip wires day and night. )

But it can strip the thinnest and most delicate wires, even stripping the outer sheath first and then the insulation off the wires inside.

Has built-in wire cutters for up to 2mm wire.

It is my favorite stripper, especially good for stranded wires.

The handles are easy to squeeze, much easier than in the next stripper I will consider.

A very common and far from new stripper design.

What makes it so good that millions choose it?

First versatility. it can strip wires of different diameters, automatically adjusting.

Secondly, this is the most convenient stripper to work with our popular flat wire:

This is probably the only stripper which can carefully remove the outer insulation from such a wire, as well as remove the insulation from two or three of its wires AT ONCE! )

I, unfortunately, did not have the VVG wire at hand for the demonstration, so I had to take what I had.

Usually, the insulation of flat wire is stripped with a knife or a thing like this:

Which is inconvenient, because in the end you get this:

The insulation remains stick out, so that they don’t get in the way, you have to cut them off with the wire cutters.

But! If you use the right stripper, it is not required! )

This stripper can also strip the insulation off two or three wires at a time.

Unfortunately, I didn’t have the right three-core wire at hand, but I think the principle is clear:

A very handy stripper for three-core cable. )

I also really liked it. although at first it seemed to me rough, but it is for thin wires, and electrics on 220 volts, especially flat VVG and the like he cleans just fine! )

As a bonus, it has built-in wire cutters and a kind of crimper (crimping tool) for insulated and non-insulated lugs. It is inconvenient to use, but if you do not have a normal crimper at hand, and need to crimp the tip. it’s a salvation.

There is also a length limiter for stripping insulation, which usually everyone removes right away. )

Like this. If possible, I’ll add an article about the stripper for coaxial cable, about a stripper-crimper for telephone and Internet cable, as well as crimps (tools for crimping cable lugs and sleeves).

I can only say that stranded wires, after stripping the insulation, should not be immediately clamped under the screw, without preparation, because it easily destroys the individual strands.

You need to crimp stranded wires with insulated or uninsulated lugs:

You can see already crimped tip above, in the photo with the first pliers, I just have reached the limit of photos. )

HSHVI (male bushing insulated tip) such thing is called, sold everywhere, if one such tip is needed to clamp two wires, you need to buy tips with a wider plastic part. HSHVI2.

UPDATE: took a video of some strippers showed crimping pliers for sleeves:

Комментарии и мнения владельцев 54

Please advise tools for not frequent car wiring repairs.

Wire clippers. type LUX and type KVT, good cutters, pliers (well, I have NWS), a set of heat shrink tubing (the best. with an adhesive layer, they gemitize connection, but they are not easy to buy), automobile super insulating tape 3M Scothc Super33 (it will never fail), for auto-connectors you need crimps for pins of those connectors (the biggest and uncertain expense item), the connectors themselves (there are universal very good connectors of Superseal system. search about them and crimps for them on the drive).

You will need a voltmeter (a good one)! Not Chinese copies of ancient crap, but something like MS8239D or handy as a tester MS8211, or Uni-t, or whatever else is there inexpensive and normal. better ask, read. about choosing a good voltmeter a lot of topics) and clamp meters (not necessary, but sometimes very useful to watch the current or leakage).

And of course you need nylon ties and a tightening tool (KVT does it), you also need a set of spatula and pry bars for trim and gun removal (there are sets in auto stores).

I also used a soft self-adhesive insulation. it often glued to the factory wiring harnesses to prevent knocking and chafing.

Of course, screwdrivers with all sorts of nozzles. there are a lot of torxes in cars. And an electric screwdriver with a drill bit. Small electric screwdriver will make much easier releasing a bunch of screws if for example you need to do something under instrument panel.

Soldering iron or gas soldering iron. but it’s better to solder). Good quality glue pads are often needed as well. they can be taped to even clean surfaces and you can use cable ties to fix the wires to them. And different size corrugations. costs pennies at the auto store, and when you install something new, it is always good to protect the wire corrugated. The car wire itself is sometimes needed. I don’t know where to get it, I’ve unraveled the American wiring harness. This wire is perfectly clean when heated, even the lighter does not melt, in contrast to the widespread turd. That means it’s safe. Where to get one. do not know, but it may have analogues. You also need fuse holders with fuses. for new circuits (put extra lights what. protect them with a fuse!).

Thank you for your comprehensive answer. You write that you need a crimper for the pins of these connectors. They’re specific? Normal, household fuses won’t do?This one for example?www.vseinstrumenti.ru/rucschi/delo_tehniki/417200/

Different pins require different sets of jaws.

I’ll give you some links to more competent people! )

Here’s a great article about SupeSeal connectors and crimps for them:

Here is a great article about different crimps:

Clippers. type LUX and KVT, good cutters, pliers (mine are NWS), heat shrinkable tubing (the best ones are with adhesive layer, they geminate connection, but they are not easy to buy), automotive super insulating tape 3M Scothc Super33 (it will never fail), for auto-connectors you need crimps for pins of those connectors (the biggest and uncertain expense), the connectors themselves (there are universal very good connectors of Superseal system. search about them and crimps for them on the drive).

Be sure to have a voltmeter (a good one)! Not Chinese copies of ancient crap, but something like MS8239D or handy as a tester MS8211, or Uni-t, or whatever else there is inexpensive and normal. better to ask around, read. about choosing a good voltmeter a lot of topics) and current clamps (not necessary, but sometimes very useful to watch the current or leakage).

And of course you need nylon ties and a tool for tightening them (KVT does it). You also need a set of spatula and pry bars for trim and gun removal (there are kits in auto stores).

I also used a soft self-adhesive insulation. they often glue it to wire harnesses so it doesn’t bump and chafe.

Of course, screwdrivers with a variety of screwdriver bits. there are a lot of torxes in cars. And an electric screwdriver with drills. Small electric screwdriver will make it easy to unscrew a lot of screws if you need to do something under dashboard for example.

A soldering iron or a gas soldering iron is better). Good quality glue pads are also often needed. they can be taped to even, clean surfaces and wires can be taped to them. And corrugators of different sizes. costs pennies at the auto store, and when you put something new, it’s always good to protect the wire with a corrugator. The car wire itself is sometimes needed. I don’t know where to get it, I unraveled the harness of American wiring. This wire is ideally stripped when heated, even a lighter does not melt, in contrast to the ubiquitous turd. That means it’s safe. I don’t know where to get one, but it may have analogues. Also need fuse holders with fuses. for new circuits (put extra lights what. protect them with a fuse!).

The most helpful comment of all I’ve come across here. Thank you very much!

How to choose a stripper

Let’s look at some general selection criteria: design, price, features, manufacturer, functionality.

Household tools

If you’re buying this device for home use, and will only use it occasionally, it’s better to choose something cheaper and easier, with the ability to strip the ends, up to 6 kvm, and to connect the cable to the ground.mm. It is impossible to achieve high productivity with them, but the user does not have such a goal.

Semi-automatic machines

To be justified for household use will be to buy a semi-automatic puller. Professionals do not neglect these models. Working with them is much more convenient than with simple handheld devices and the work moves faster. Average deviations upwards can be very significant.

Automatic strippers

Professionals, whose earnings directly depend on the quality and capabilities of the tooling should pay attention to automatic devices. The work with such a device is very fast, undercuts wires are excluded. With the automatic machine you can remove the outer sheath of round and rectangular cross-section, remove the polymer coatings from all cores at once. You don’t need to have any skills to do it. You only need to insert the cable into the jaws of the machine and squeeze the handles.

Desktop machines

Such devices are designed for workshops engaged in electronic equipment assembly. This electric machine can have program control. The usual for them is the following set of operations:

At the output the operator receives ready assembled units for circuit assembly. Machine tools can be electric or pneumatic, desktop or stationary in size and installation method. In the photo automatic table machine for cutting and stripping wires ZDBX-1 from Junquan company from Hong Kong.

Price range

Price range depends on brand and functionality. The simplest device that performs only the basic operation is quite affordable. Its purchase costs on average from 100 to 400, depending on brand and quality. However, among manual products there are quite expensive, almost the same cost as automatic machines. For example, KVT WS-20 Voltmaster.

On the contrary, some models of automatic machines do not exceed As a rule, these are popular models of the world’s brands, multi-functional, high-quality materials.

Choice of function

Regardless of the design, strippers can be single and multifunctional. This is probably the most important thing you should pay attention to. The cheapest models can only strip the ends, like the Stanley 0-84-010. It is much more convenient to work with a multifunctional device, which can not only cut the ends, but also cut the cable. The whole process takes no more than 15 seconds.

But that’s not all. Foldable, box-style, mechanical models let you cut cores, trim ends quickly with selections for different diameters, and quickly strip outside insulation. To do this, a height-adjustable circular blade is installed in one end of the product. The whole process is performed as follows:

• The end of the cable must be placed on the knife so that the cut of the outer sheath is visible.
• Then use the adjustable key to raise the blade until it cuts into the cable to the thickness of the sheath, but no more.
• Then the cable is pulled through the blade of the knife, cutting the polymer longitudinally.
• Cut the cut material using a special pick of the multifunctional knife.

Fast, accurate, handy. An example of such a device can be the KBT WS-09 -sized stripper. It costs an average of 800, i.e.е. Slightly cheaper than some semi-automatic products.

Even more functionality is available with the KBT WS-05. To the above capabilities of the model KBT WS-09 added screwdriver functions in special clips stored two double-sided interchangeable bits for flat and Phillips screwdriver of different sizes. Inserted into a special slot in the end of the device. To ensure a snug fit in the socket, the bit is “squeezed” until it snaps in.

Now it is possible to cut and strip conductor ends, clamp them in the terminal block using the stripper as a screwdriver. In addition, this “screwdriver” can be used to check the presence of voltage in the circuit to be assembled. For this purpose, the body of the model has a special contact plate and LED lamp. We lean the “sting” of the screwdriver to the conductor and touch the plate with the thumb. We can tell by the reaction of the LED whether we can continue working or if we should de-energize the line.

Important! In order to protect against electric shock, electrical installation work should only be carried out when the mains voltage is off.

To put it simply, before you get anywhere with a screwdriver, you must de-energize the electrical system.

In semi-automatic and automatic products, versatility is provided by the following functions:

• cable cutting;
• Automatic determination of conductor cross-section;
• Removal of the outer sheath;
• stripping of insulation from multicore cable in one step;
• crimping (crimping) lugs.

This feature set is very useful for cutting out cables in switch cabinets.

What is the best company to buy a manual stripper

This is one of the simplest types of crimping equipment. It is a pliers, which are equipped with small notches with sharpened edges. Removing the old insulation layer will be achieved by a circular motion. Cutting element will pass through the lip as the handle is squeezed. No need to adjust the pliers manually, a spring is provided. Handle lock prevents children from accidental contact with the cutting elements. The weight and size of the strippers from the world’s best manufacturers will be negligible.

Rating opens up the model for the advanced user. Provides a function to protect conductors of a certain range. Can be used for crimping and cutting wire. Can be used to press on coaxial connectors. Appearance is different from similar tools, which is what makes it so popular. Characterized by a normal-volume handle. No return spring, however. If you do not have a crimper, you can use pliers or a stripper tip. In a pinch, multi-tool undercrimpers come in handy.

• crimping function of lugs;
• advanced model;
• protection of conductors with a cross section of 4 mm or less;
• comfortable handles;
• build quality;
• low weight;
• blades can be sharpened manually.

An accessory preferred by beginners who haven’t yet determined its final application area. Used for removing old insulation from 2-28 mm cord. Manufacturer’s brand. STAYER. The multi-purpose puller is made of high-quality materials. Specialists note the presence of a terrific resource that will allow you to perform any wiring work. Includes protective cap. It is also possible to adjust the depth of cut.

You can buy a set for the price of. 330

• weight 103 g;
• comfortable size;
• opportunity to order online;
• manufacturer’s warranty (one year, from the date of purchase);
• multifunctionality;
• budget model.

Multi-purpose tool, which uses stainless steel for its manufacture. It can be used to cut M3 and M4 screws. Forming loops is also possible. One part of the jaws has a serrated surface, so it can be easily used as a pair of pliers. Handles are large so it fits comfortably in a man’s hand. One of them is slightly curved. At the same time it remains small and relatively light. Length 18 cm. The return spring is rounded, easy to use. Two sizes are available, listed in accordance with American standards (AWG). There are also six cutting edge sizes to choose from. High-strength steel is used as a raw material. Considered one of the most practical models on the market.

Of the line of handheld strippers presented, this is probably the model considered the easiest. Can be used for work with wires of 0,25-4mm thickness. Handles are two-piece, but the tool looks more like a cable stripper. The size adjuster is located on the handle and is labeled. The mechanism will not let the jaws close more than needed. That is why there is no question of damaging the insulation. The return spring is located on the back side. Locking device is available, which is useful when transporting equipment.

• weight;
• easy to use;
• two-piece handles;
• rotary knob;
• handles are not slippery;
• recoil spring;
• locking mechanism;
• compactness.

How to Strip a Coax Wire

Wire stripper: rules for selecting a cable stripper and wire stripper

Work of an electrician is connected with stripping of conductors, and both an ordinary tool. a construction knife or pliers, and special pliers are used for this purpose.

We recommend the stripper for stripping wires, as only it ensures a precise and accurate cut. The range of ploughs is vast, so let’s try to understand the features of the most popular types.